QF73101A3101A Antenna

3101A Antenna System Settings and User Notes The World Leader in Subsurface Ima ging™ Geophysical Survey Systems, Inc. Tel 603.893.1109 • Fax 603.889.3984 [email protected] www.geophysical.com August, 2010 Copyright© 2001, 2010 Geophysical Survey Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form Published by Geophysical Survey Systems, Inc. 12 Industrial Way Drive Salem, New Hampshire 03079 Printed in the United States GSSI, RADAN, and SIR are registered trademarks of Geophysical Survey Systems, Inc. Geophysical Survey Systems, Inc. Model 3101A Series Antennas System Settings and User Notes Limited Warranty, Limitations Of Liability And Restrictions Geophysical Survey Systems, Inc. hereinafter referred to as GSSI, warrants that for a period of 24 months from the delivery date to the original purchaser this product will be free from defects in materials and workmanship. EXCEPT FOR THE FOREGOING LIMITED WARRANTY, GSSI DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. GSSI's obligation is limited to repairing or replacing parts or equipment which are returned to GSSI, transportation and insurance pre-paid, without alteration or further damage, and which in GSSI's judgment, were defective or became defective during normal use. GSSI ASSUMES NO LIABILITY FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR INJURIES CAUSED BY PROPER OR IMPROPER OPERATION OF ITS EQUIPMENT, WHETHER OR NOT DEFECTIVE. Before returning any equipment to GSSI, a Return Material Authorization (RMA) number must be obtained. Please call the GSSI Customer Service Manager who will assign an RMA number. Be sure to have the serial number of the unit available Geophysical Survey Systems, Inc. Model 3101A Series Antennas System Settings and User Notes FCC Notice (for U.S. Customers): This device complies with part 15 of the FCC Rules: Operation is subject to the following conditions: 1. This device many not cause harmful interference, and 2. This device must accept any interference received, Including interference that may cause undesired operation Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Operation of this device is restricted to law enforcement, fire and rescue officials, scientific research institutes, commercial mining companies, and construction companies. Operation by any other party is a violation of 47 U.S.C. § 301 and could subject the operator to serious legal penalties. Coordination Requirements (a) UWB imaging systems require coordination through the FCC before the equipment may be used. The operator shall comply with any constraints on equipment usage resulting from this coordination. (b) The users of UWB imaging devices shall supply detailed operational areas to the FCC Office of Engineering and Technology who shall coordinate this information with the Federal Government through the National Telecommunications and Information Administration. The information provided by the UWB operator shall include the name, address and other pertinent contact information of the user, the desired geographical area of operation, and the FCC ID number and other nomenclature of the UWB device. This material shall be submitted to the following address: Frequency Coordination Branch, OET Federal Communications Commission 445 12 th Street, SW Washington, D.C. 20554 ATTN: UWB Coordination (d) Users of authorized, coordinated UWB systems may transfer them to other qualified users and to different locations upon coordination of change of ownership or location to the FCC and coordination with existing authorized operations. (e) The NTIA/FCC coordination report shall include any needed constraints that apply to day-to-day operations. Such constraints could specify prohibited areas of operations or areas located near authorized radio stations for which additional coordination is required before operation of the UWB equipment. If additional local coordination is required, a local coordination contact will be provided. (f) The coordination of routine UWB operations shall not take longer than 15 business days from the receipt of the coordination request by NTIA. Special temporary operations may be handled with an expedited turn-around time when circumstances warrant. The operation of UWB systems in emergency situations involving the safety of life or property may occur without coordination provided a notification procedure, similar to that contained in CFR47 Section 2.405(a)-(e), is followed by the UWB equipment user. Notice: Use of this device as a wall imaging system is prohibited by FCC regulations. Geophysical Survey Systems, Inc. Model 3101A Series Antennas System Settings and User Notes Canadian Requirements for RSS-220 Canadian Requirements of RSS-220 for Ground Antennas This Ground Penetrating Radar Device shall be operated only when in contact with or within 1 m of the ground. This Ground Penetrating Radar Device shall be operated only by law enforcement agencies, scientific research institutes, commercial mining companies, construction companies, and emergency rescue or firefighting organizations. Cet appareil de radar de sol (ou géoradar) ne doit être utilisé qu’en contact avec le sol ou à 1 m maximum au dessus du sol. Cet appareil de radar de sol ne doit être utilisé que par les forces de l’ordre, les instituts de recherche scientifiques, les sociétés minières, les sociétés de construction, et les organisations de secours d’urgence ou de combat du feu. Canadian Requirements of RSS-220 for Hand-held Antennas This In-wall Radar Imaging Device shall be operated where the device is directed at the wall and in contact with or within 20 cm of the wall surface. This In-wall Radar Imaging Device shall be operated only by law enforcement agencies, scientific research …

Text truncated - open the document above for the full version.

12 Industrial Way Tel 603.893.1109 • Fax 603-889-3984 Salem, NH 03079 www.geophysical.com • [email protected] Geophysical Survey Systems, Inc. June 21, 2010 Attention: Application Examiner Reviewing Engineer Re: Attestation Statement Applicant: Geophysical Survey Systems, Inc. FRN: 0007-2729-25 FCC ID: QF73101A To whom it may concern, The internal photographs submitted with this application are the same as was EMI tested. Sincerely, _____________________________________ Signature Alan E. Schutz _____________________________________ Name Vice President of Technology _____________________________________ Title Geophysical Survey Systems, Inc. _____________________________________ Company 603-893-1109 _____________________________________ Telephone

12 Industrial Way Tel 603.893.1109 • Fax 603-889-3984 Salem, NH 03079 www.geophysical.com • [email protected] Geophysical Survey Systems, Inc. August 1, 2010 Mr. Julius Knapp Chief, Office of Engineering and Technology Federal Communications Commission 445 12th Street SW Washington DC 20554 Re: Certification Application FCC ID QF73101A Dear Mr. Knapp: The above-referenced application, filed by Geophysical Survey Systems, Inc., seeks certification for a ground-penetrating radar (GPR) device. The application shows compliance with the Commission's Rules and does not require waivers. We request that certain photographs showing the interior of the devices be withheld from public disclosure. The Commission has previously granted confidentiality under similar conditions to the following applications: FCC ID QF750400 EA640311 FCC ID QF762000 EA291754 FCC ID QF75103A EA870041 FCC ID QLA250MHZ EA586775 FCC ID QLAMID EA364767 FCC ID QLA500MHZ EA369105 FCC ID QLA800MHZ EA813498 F ACTUAL BASIS FOR CONFIDENTIALITY REQUEST Ordinarily the Commission denies confidentiality to photographs of a device on the ground that the information they contain is freely available to a competitor, simply by purchasing the device and (if necessary) unscrewing the cover. The devices in question are different. The interior is sealed, and its internal appearance is inaccessible to the purchaser. To gain access to the views shown in the interior photographs, a competitor would have to purchase the device and then carry out the following steps: 1. Use a drill to dismantle all the rivets securing the cover. (A competitor has no way of knowing the correct drill size, or where to begin dismantling. Use of the wrong drill, or starting with the wrong rivets, will require replacing all mechanical parts.) 12 Industrial Way Tel 603.893.1109 • Fax 603-889-3984 Salem, NH 03079 www.geophysical.com • [email protected] Geophysical Survey Systems, Inc. 2. Destroy and remove all silicon caulking used for sealing the antenna. Absorbers are glued to the transmitter elements and cannot be removed undamaged. The antenna flares are connected to the RF absorbers, as well as to the metallic shields, with thin layers of absorbers glued in place. These strips cannot be loosened without destroying them. A competitor is unlikely to have access to the right material, or even to know what grade of materials to use. 3. Use a drill to dismantle the rivets in the shield. 4. De-solder the sampler head, so as to remove the electronics. GSSI has never released instructions on how to disassemble its units, and does not answer questions on how to do so. This information is kept internal to the company. If a unit arrives at the company's repair facility showing evidence of such tampering, the company does not repair it, but charges the customer for a new unit plus freight costs. The Commission's posting of the photographs would allow a competitor to bypass this difficult and expensive disassembly. From the photographs, a competitor can estimate: 1. the costs of manufacturing the printed circuit boards and mechanical housing; 2. the man-hours required to assemble the device; 3. any compatibility problems the manufacturer will have in designing new systems; and 4. the age of the electronic design (which gives valuable competitive information on upgrade and R&D efforts). Access to interior photographs would almost permit a competitor to conduct a complete reverse engineering, to the point of producing a schematic. We respectfully submit that manufacturers should not be required to hand over to competitors the fruits of years of expensive engineering. 12 Industrial Way Tel 603.893.1109 • Fax 603-889-3984 Salem, NH 03079 www.geophysical.com • [email protected] Geophysical Survey Systems, Inc. L EGAL BASIS FOR REQUEST The Freedom of Information Act (FOIA) protects from disclosure "commercial or financial information obtained from a person and privileged or confidential." 1 Information is confidential if it is "the kind of information 'that would customarily not be released to the public by the person from whom it was obtained,'" 2 and would cause "substantial harm to the competitive position of the person from whom the information was obtained." 3 The D.C. Circuit in Worthington Compressors addressed the specific issue underlying the present request: the "additional wrinkle that the requested information is available, at some cost, from an additional source." 4 Here, of course, the "additional source" is the acquisition and destruction of a specimen unit, and the cost is that of repairing or replacing it following access to the interior. According to the Worthington court, availability of the information through alternate sources triggers two additional inquiries: (1) the commercial value of the information, and (2) the cost of acquiring the information through the other means. 5 The court acknowledges that the submitting party can suffer competitive harm if the information has commercial value to competitors. 6 That is the case here. As explained above, the interior photographs disclose a great deal of expensive (and proprietary) engineering. Once commercial value is established, the court turns next to the cost of acquiring the information by means other than agency disclosure. If competitors "can acquire the information [by other means] only at considerable cost, agency disclosure may well benefit the competitors at the expense of the submitter." 7 1 5 U.S.C. Sec. 552(b)(4). 2 McDonnell Douglas Corp. v. NASA, 180 F.3d 303, 304-05 (D.C. Cir. 1999), quoting Critical Mass Energy Project v. NRC, 975 F.2d 871, 879 (D.C. Cir. 1992) (en banc). See also National Parks & Conservation Ass'n v. Morton, 498 F.2d 765, 770 (D.C. Cir. 1974). 3 Worthington Compressors, Inc., v. Costle, 662 F.2d 45, 51 (D.C. Cir. 1981), citing National Parks & Conservation Ass'n v. Morton, 498 F.2d 765, 770 (D.C.Cir.1974). 4 Id. (italics in original). 5 Id. 6 Id. 7 Id. Geophysical S…

Text truncated - open the document above for the full version.

12 Industrial Way Tel 603.893.1109 • Fax 603-889-3984 Salem, NH 03079 www.geophysical.com • [email protected] Geophysical Survey Systems, Inc. Letter Of Agency Date: August 1, 2010 To Whom It May Concern: Please be advised that Alan Schutz of Geophysical Survey Systems, Inc. authorizes Larry Stillings of Compliance Worldwide, Inc. to act on our behalf, until otherwise notified, for applications submitted for the purpose of obtaining an FCC Grant of Equipment Authorization. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Signatory Alan Schutz Vice President, Technology

12 Industrial Way Tel 603.893.1109 • Fax 603-889-3984 Salem, NH 03079 www.geophysical.com • [email protected] Geophysical Survey Systems, Inc. Re: Request for confidentiality FCC ID: QF7 3101A Applicant: Geophysical Survey Systems, Inc. Dear Mr. Lyles, Permanent Confidentiality Request is hereby submitted by Geophysical Survey Systems, Inc. to withhold permanently from public review certain portions of the application for equipment certification for the referenced IC identifier. In particular, the following sections of the application are to be kept permanently confidential: Exhibit Type File Name Block Diagram Schematics Operational Description Internal Photos QF73101A BLOCK DIAGRAM.pdf QF73101A Transmitter Schematic.pdf QF73101A Operational Description.pdf QF73101A Internal Photos.pdf Rationale for request for confidentiality: Geophysical Survey Systems, Inc. has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. A separate letter justifying confidential treatment of the internal photographs is included. The fee for confidentiality has been submitted along with the fee for certification. If you have questions or need further information, please contact the undersigned. Sincerely, Alan E. Schutz Vice President - Technology Geophysical Survey Systems, Inc.

12 Industrial Way Tel 603.893.1109 • Fax 603-889-3984 Salem, NH 03079 www.geophysical.com • [email protected] Geophysical Survey Systems, Inc. August 1, 2010 Mr. Julius Knapp Chief, Office of Engineering and Technology Federal Communications Commission 445 12th Street SW Washington DC 20554 Re: Certification Application FCC ID QF73101A Dear Mr. Knapp: The above-referenced application, filed by Geophysical Survey Systems, Inc., seeks certification for a ground-penetrating radar (GPR) device. The application shows compliance with the Commission's Rules and does not require waivers. We request that certain photographs showing the interior of the devices be withheld from public disclosure. The Commission has previously granted confidentiality under similar conditions to the following applications: FCC ID QF750400 EA640311 FCC ID QF762000 EA291754 FCC ID QF75103A EA870041 FCC ID QLA250MHZ EA586775 FCC ID QLAMID EA364767 FCC ID QLA500MHZ EA369105 FCC ID QLA800MHZ EA813498 F ACTUAL BASIS FOR CONFIDENTIALITY REQUEST Ordinarily the Commission denies confidentiality to photographs of a device on the ground that the information they contain is freely available to a competitor, simply by purchasing the device and (if necessary) unscrewing the cover. The devices in question are different. The interior is sealed, and its internal appearance is inaccessible to the purchaser. To gain access to the views shown in the interior photographs, a competitor would have to purchase the device and then carry out the following steps: 1. Use a drill to dismantle all the rivets securing the cover. (A competitor has no way of knowing the correct drill size, or where to begin dismantling. Use of the wrong drill, or starting with the wrong rivets, will require replacing all mechanical parts.) 12 Industrial Way Tel 603.893.1109 • Fax 603-889-3984 Salem, NH 03079 www.geophysical.com • [email protected] Geophysical Survey Systems, Inc. 2. Destroy and remove all silicon caulking used for sealing the antenna. Absorbers are glued to the transmitter elements and cannot be removed undamaged. The antenna flares are connected to the RF absorbers, as well as to the metallic shields, with thin layers of absorbers glued in place. These strips cannot be loosened without destroying them. A competitor is unlikely to have access to the right material, or even to know what grade of materials to use. 3. Use a drill to dismantle the rivets in the shield. 4. De-solder the sampler head, so as to remove the electronics. GSSI has never released instructions on how to disassemble its units, and does not answer questions on how to do so. This information is kept internal to the company. If a unit arrives at the company's repair facility showing evidence of such tampering, the company does not repair it, but charges the customer for a new unit plus freight costs. The Commission's posting of the photographs would allow a competitor to bypass this difficult and expensive disassembly. From the photographs, a competitor can estimate: 1. the costs of manufacturing the printed circuit boards and mechanical housing; 2. the man-hours required to assemble the device; 3. any compatibility problems the manufacturer will have in designing new systems; and 4. the age of the electronic design (which gives valuable competitive information on upgrade and R&D efforts). Access to interior photographs would almost permit a competitor to conduct a complete reverse engineering, to the point of producing a schematic. We respectfully submit that manufacturers should not be required to hand over to competitors the fruits of years of expensive engineering. 12 Industrial Way Tel 603.893.1109 • Fax 603-889-3984 Salem, NH 03079 www.geophysical.com • [email protected] Geophysical Survey Systems, Inc. L EGAL BASIS FOR REQUEST The Freedom of Information Act (FOIA) protects from disclosure "commercial or financial information obtained from a person and privileged or confidential." 1 Information is confidential if it is "the kind of information 'that would customarily not be released to the public by the person from whom it was obtained,'" 2 and would cause "substantial harm to the competitive position of the person from whom the information was obtained." 3 The D.C. Circuit in Worthington Compressors addressed the specific issue underlying the present request: the "additional wrinkle that the requested information is available, at some cost, from an additional source." 4 Here, of course, the "additional source" is the acquisition and destruction of a specimen unit, and the cost is that of repairing or replacing it following access to the interior. According to the Worthington court, availability of the information through alternate sources triggers two additional inquiries: (1) the commercial value of the information, and (2) the cost of acquiring the information through the other means. 5 The court acknowledges that the submitting party can suffer competitive harm if the information has commercial value to competitors. 6 That is the case here. As explained above, the interior photographs disclose a great deal of expensive (and proprietary) engineering. Once commercial value is established, the court turns next to the cost of acquiring the information by means other than agency disclosure. If competitors "can acquire the information [by other means] only at considerable cost, agency disclosure may well benefit the competitors at the expense of the submitter." 7 1 5 U.S.C. Sec. 552(b)(4). 2 McDonnell Douglas Corp. v. NASA, 180 F.3d 303, 304-05 (D.C. Cir. 1999), quoting Critical Mass Energy Project v. NRC, 975 F.2d 871, 879 (D.C. Cir. 1992) (en banc). See also National Parks & Conservation Ass'n v. Morton, 498 F.2d 765, 770 (D.C. Cir. 1974). 3 Worthington Compressors, Inc., v. Costle, 662 F.2d 45, 51 (D.C. Cir. 1981), citing National Parks & Conservation Ass'n v. Morton, 498 F.2d 765, 770 (D.C.Cir.1974). 4 Id. (italics in original). 5 Id. 6 Id. 7 Id. Geophysical S…

Text truncated - open the document above for the full version.

12 Industrial Way Tel 603.893.1109 • Fax 603-889-3984 Salem, NH 03079-4843 www.geophysical.com • [email protected] QF75103A Geophysical Survey Systems, Inc. 3101A Antenna Assembly External Photos Shown with marker/handle, survey wheel, and control cable QF75103A Geophysical Survey Systems, Inc. 12 Industrial Way Tel 603.893.1109 • Fax 603-889-3984 Salem, NH 03079-4843 www.geophysical.com • [email protected] Connector end Bottom

QF73101A LABEL LOCATION FCC LABELS LABELS TO READ: THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING 2 CONDITIONS: 1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. 2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. MADE IN USA FCC ID: QF73101A 1.25 " 3.5" Operation of this device is restricted to law enforcement, fire and rescue officials, scientific research institutes, commercial mining companies, and construction companies. Operation by any other party is a violation of 47 U.S.C. § 301 and could subject the operator to serious legal penalties. LABEL MATERIAL: THESE LABELS ARE PERMANENT FOR THE LIFE OF THE PRODUCT. THEY ARE REVERSE SCREEN-PRINTED ON 8 MIL POLYESTER FILM WITH PERMANENT ADHESIVE.

Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 COMPLIANCE WORLDWIDE INC. TEST REPORT 280-10R1 In Accordance with the Requirements of Industry Canada RSS 220, Issue 1, March 2009 Federal Communications Commission 47 CFR Part 15, Subpart F Technical Requirements for Ground Penetrating Radar Systems Issued to Geophysical Survey Systems, Inc. 12 Industrial Way Salem, NH 03079 603-893-1109 For the 3101A Antenna FCC ID: GF73101A IC: 8498A-3101A Report Issued on October 8, 2010 This test report shall not be reproduced, except in full, without written permission from Compliance Worldwide, Inc. (603) 887 3903 Fax 887 6445 http://www.complianceworldwide.com Test Number: 280-10R1 Issue Date: 10/08/2010 Page 2 of 28 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com Table of Contents 1. Scope .................................................................................................................................. 3 2. Product Details.................................................................................................................... 3 3. Product Configuration ......................................................................................................... 3 4. Measurements Parameters................................................................................................. 6 4. Measurements Parameters (continued).............................................................................. 7 5. Measurements Summary .................................................................................................... 8 6. Measurement Data.............................................................................................................. 9 6. Measurement Data (continued)......................................................................................... 10 6. Measurement Data (continued)......................................................................................... 11 6. Measurement Data (continued)......................................................................................... 12 6. Measurement Data (continued)......................................................................................... 13 6. Measurement Data (continued)......................................................................................... 15 6. Measurement Data (continued)......................................................................................... 16 6. Measurement Data (continued)......................................................................................... 17 6. Measurement Data (continued)......................................................................................... 18 6.6. Regulatory Limit: FCC Part 15.209 .........................................................................................18 6.6.1. Measurement Equipment Used to Perform Test ................................................................. 18 6.6.2. Measurement & Equipment Setup ...................................................................................... 18 6.6.3. Test Procedure..................................................................................................................... 18 6. Measurement Data (continued)......................................................................................... 19 6.6.4. 120 Volts, 60 Hz Phase ....................................................................................................... 19 6. Measurement Data (continued)......................................................................................... 20 6.6.5. 120 Volts, 60 Hz Neutral ...................................................................................................... 20 6. Measurement Data (continued)......................................................................................... 21 7. Test Images ...................................................................................................................... 22 7.1. Spurious Emissions – 30 MHz – 1 GHz Horizontal........................................................ 22 7. Test Images ...................................................................................................................... 23 7.2. Spurious Emissions – 30 MHz – 1 GHz Vertical ............................................................ 23 7. Test Images ...................................................................................................................... 24 7.3. Spurious Emissions – 1 - 10 GHz Vertical ..................................................................... 24 7. Test Images ...................................................................................................................... 25 7.4. Spurious Emissions – Occupied BW Test Setup ........................................................... 25 7. Test Images ...................................................................................................................... 26 7.5. Conducted Emissions (Front)......................................................................................... 26 7. Test Images ...................................................................................................................... 27 7.5. Conducted Emissions (Rear) ......................................................................................... 27 8. Test Site Description ......................................................................................................... 28 Test Number: 280-10R1 Issue Date: 10/08/2010 Page 3 of 28 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com 1. Scope This test report certifies that the Geophysical Survey Systems 3101A Antenna, as tested, meets the FCC Part 15, Subpart F and Industry Canada RSS 220 requirements. The scope of this test report is limited to the test …

Text truncated - open the document above for the full version.

Test Number: 280-10R1 Issue Date: 10/08/2010 7. Test Images 7.1. Spurious Emissions – 30 MHz – 1 GHz Horizontal Page 22 of 28 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com Test Number: 280-10R1 Issue Date: 10/08/2010 7. Test Images 7.2. Spurious Emissions – 30 MHz – 1 GHz Vertical Page 23 of 28 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com Test Number: 280-10R1 Issue Date: 10/08/2010 7. Test Images 7.3. Spurious Emissions – 1 - 10 GHz Vertical Page 24 of 28 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com Test Number: 280-10R1 Issue Date: 10/08/2010 7. Test Images 7.4. Spurious Emissions – Occupied BW Test Setup Page 25 of 28 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com Test Number: 280-10R1 Issue Date: 10/08/2010 7. Test Images 7.5. Conducted Emissions (Front) Page 26 of 28 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com Test Number: 280-10R1 Issue Date: 10/08/2010 7. Test Images 7.5. Conducted Emissions (Rear) Page 27 of 28 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax 887 6445 http://www.cw-inc.com