QGS6252009Electronic Fence

Class B Device Statement: ( Section 15.105 (b) of the FCC Rules ) “Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.

FCC ID: QGS6252009 June 2002 Page 23 of 28 External Photo

FCC ID: QGS6252009 June 2002 Page 25 of 28 Internal Photo FCC ID: QGS6252009 June 2002 Page 26 of 28 Internal Photo

PAC Products Limited Application For Certification PAC Electronic Fence FCC ID: QGS6252009 June, 2002 All services undertaken are subject to the following general policy: Reports are submitted for exclusive use of the client to whom they are addressed. Their significance is subject to the adequacy and representative character of the samples and to the comprehensiveness of the tests, examinations or surveys made. No quotations from reports or use of Intertek Testing Services name is permitted except as expressly authorized by Intertek Testing Services in writing. The report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government. The NVLAP logo is applicable for testing to I EC/CISPR 22:1993 and FCC-47 CFR part 15 only. TABLE OF CONTENTS 1.0 General Description....................................................................................................................... 1 1.1 Related Submittal(s) Grants ................................................................................................1 1.2 Product Description ............................................................................................................ 1 1.3 Test Methodology ............................................................................................................... 1 1.4 Test Facility ........................................................................................................................ 1 2.0 System Test Configuration............................................................................................................ 2 2.1 Justification......................................................................................................................... 2 2.2 EUT Exercising Software ................................................................................................... 2 2.3 Special Accessories............................................................................................................. 2 2.4 Equipment Modification .....................................................................................................2 2.5 Support Equipment List and Description ............................................................................ 2 2.6 Test Configuration Block Diagram ..................................................................................... 3 3.0 Test Results..................................................................................................................................... 4 3.1 Radiated Emissions, FCC 15.209 ....................................................................................... 5 3.2 Conducted Emissions, FCC 15.207 .................................................................................. 10 3.3 Test Procedure .................................................................................................................. 13 3.4 Field Strength Calculation ................................................................................................ 14 4.0 Test Equipment............................................................................................................................ 15 EXHIBIT I Test Set Up Photographs................................................................................................................ 16 EXHIBIT II FCC ID Label Location.................................................................................................................. 21 EXHIBIT III External Photographs ..................................................................................................................... 22 EXHIBIT IV Internal Photographs ...................................................................................................................... 24 EXHIBIT V Electrical Schematics and Block Diagram ..................................................................................... 27 EXHIBIT VI User Manual and Operational Description ..................................................................................... 28 FCC ID: QGS6252009 June 2002 Page 1 of 28 1.0 GENERAL DESCRIPTION 1.1 Related Submittals Grants This is single application of the PAC Electronic Fence for Certification under Part 15.209 There are no other simultaneous applications . 1.2 Product Description The PAC Electronic Fence is an induction loop fence transmitter FC3 that connects directly to an loop- wire antenna to provide a low frequency signal that activate a dog containment collar unit. PAC Electronic Fence Antenna The PAC Electronic Fence antenna is a loop-wire antenna (1.5mm 2 multi-cored cable PVC 7/0.53 BS 6491X, or equivalent) into a loop of 1500 yards – 15 to 20 ohms max. 1.3 Test Methodology Emission measurements were performed according to the procedures specified in ANSI C63.4 (1992). All measurements were performed in 3m full size semi-anechoic chamber, and for each scan, the procedure for maximizing emissions in Appendices D and E were followed. All Radiated tests were performed at an antenna to EUT distance of 3 meters, unless stated otherwise in the "Justification Section" of this Application. 1.4 Test Facility The test site facility used to collect the radiated and conducted measurement data is located at 7250 Hudson Blvd., Oakdale, Minnesota. This test facility has been fully described in a report dated on May 2000 submitted to your office. Please reference the Registration number: 90706, dated May 19,2000. FCC ID: QGS6252009 June 2002 Page 2 of 28 2.0 SYSTEM TEST CONFIGURATION 2.1 Justification N/A 2.2 EUT Exercising Software N/A 2.3 Special Accessories There are no special accessories necessary for compliance of these products. 2.4 Equipment Modification No modifications were installed during the testing. 2.5 Support Equipment List and Description N/A FCC ID: QGS6252009 June 2002 Page 3 of 28 2.6 Test Setup and Test Configuration Block Diagrams The EUT was setup as tabletop equipment,…

Text truncated - open the document above for the full version.

A PAC Products Limited Application For Certification PAC Electronic FencePAC Electronic Fence FCC ID: QGS6252009FCC ID: QGS6252009 August, 2002 All services undertaken are subject to the following general policy: Reports are submitted for exclusive use of the client to whom they are addressed. Their significance is subject to the adequacy and representative character of the samples and to the comprehensiveness of the tests, examinations or surveys made. No quotations from reports or use of Intertek Testing Services name is permitted except as expressly authorized by Intertek Testing Services in writing. The report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government. The NVLAP logo is applicable for testing to I EC/CISPR 22:1993 and FCC-47 CFR part 15 only. A TABLE OF CONTENTSTABLE OF CONTENTS 1.01.0General DescriptionGeneral Description.......................................................................................1 1.1Related Submittal(s) Grants..........................................................................1 1.2Product Description...................................................................................1 1.3Test Methodology.....................................................................................1 1.4Test Facility............................................................................................1 2.02.0System Test ConfiguratioSystem Test Configurationn.............................................................................2 2.1Justification.............................................................................................2 2.2EUT Exercising Software............................................................................2 2.3Special Accessories...................................................................................2 2.4Equipment Modification..............................................................................2 2.5Support Equipment List and Description..........................................................2 2.6Test Configuration Block Diagram.................................................................3 3.03.0Test ResultsTest Results...................................................................................................4 3.1Radiated Emissions, FCC 15.209...................................................................5 3.2Conducted Emissions, FCC 15.207................................................................9 3.3Test Procedure........................................................................................12 3.4Field Strength Calculation..........................................................................13 4.04.0Test EquipmentTest Equipment.............................................................................................14 EXHIBIT IEXHIBIT I Test Set Up Photographs......................................................................................15 EXHIBIT IIEXHIBIT II FCC ID Label Location........................................................................................24 EXHIBIT IIIEXHIBIT III External Photographs..........................................................................................25 EXHIBIT IVEXHIBIT IV Internal Photographs...........................................................................................27 EXHIBIT VEXHIBIT V Electrical Schematics and Block Diagram..................................................................30 EXHIBIT VIEXHIBIT VI User Manual and Operational Description.................................................................31 A FCC ID: QGS6252009August 2002, Rev. 2 Page 1 of 31 1.0 1.0 GENERAL DESCRIPTIONGENERAL DESCRIPTION 1.1 1.1 Related Submittals GrantsRelated Submittals Grants This is single application of the PAC Electronic Fence for Certification under Part 15.209 There are no other simultaneous applications. 1.2 1.2 Product DescriptionProduct Description The PAC Electronic Fence is an induction loop fence transmitter FC3 that connects directly to an loop- wire antenna to provide a low frequency signal that activate a dog containment collar unit. PAC Electronic Fence AntennaPAC Electronic Fence Antenna The PAC Electronic Fence antenna is a loop-wire antenna (1.5mm 2 multi-cored cable PVC 7/0.53 BS 6491X, or equivalent) into a loop of 1500 yards – 15 to 20 ohms max. 1.31.3Test MethodologTest Methodologyy Emission measurements were performed according to the procedures specified in ANSI C63.4 (1992)ANSI C63.4 (1992). Radiated Emissions measurements were performed in Open Area Test Site and in 3m full size semi-anechoic chamber, and for each scan, the procedure for maximizing emissions in Appendices D and E were followed. All Radiated tests were performed at an antenna to EUT distance of 3 meters, unless stated otherwise in the "Justification SectionJustification Section" of this Application. 1.41.4Test FacilityTest Facility The test site facility used to collect the radiated and conducted measurement data is located at 7250 Hudson Blvd., Oakdale, Minnesota. This test facility has been fully described in a report dated on May 2000 submitted to your office. Please reference the Registration number: 90706, dated May 19,2000. A FCC ID: QGS6252009August 2002, Rev. 2 Page 2 of 31 2.02.0SYSTEM TEST CONFIGURATIONSYSTEM TEST CONFIGURATION 2.12.1JustificationJustification Radiated Emissions testing in frequency range from 9kHz up to 30MHz was performed in Open Area Test Site with a measurement distance of 30m. An Extrapolation Factor of 60dB/decade was used in the frequency range from 9 to 150kHz. Radiated Emissions testing in the frequency range above 30MHz was performed in 3m full size Anechoic Chamber with a measurement distance of 3m. 2.22.2EUT Exercising SoftwareEUT Exercising Software N/A 2.32.3Special AccessoriesSpecial Accessories There are no special accessories necessary for compliance of these products. 2.42.4Equipment Mod…

Text truncated - open the document above for the full version.

FCC ID: QGS6252009 June 2002 Page 17 of 28 Radiated Emissions Test Configuration FCC ID: QGS6252009 June 2002 Page 18 of 28 Radiated Emissions Test Configuration FCC ID: QGS6252009 June 2002 Page 19 of 28 Conducted Emissions Test Configuration FCC ID: QGS6252009 June 2002 Page 20 of 28 Conducted Emissions Test Configuration

A FCC ID: QGS6252009August 2002, Rev. 2 Page 15 of 31 EXHIBIT IEXHIBIT I TEST SET UP PHOTOSTEST SET UP PHOTOS A FCC ID: QGS6252009August 2002, Rev. 2 Page 16 of 31 Radiated Emissions Test ConfigurationRadiated Emissions Test Configuration A FCC ID: QGS6252009August 2002, Rev. 2 Page 17 of 31 Radiated Emissions Test ConfigurationRadiated Emissions Test Configuration A FCC ID: QGS6252009August 2002, Rev. 2 Page 18 of 31 Radiated Emissions Test ConfigurationRadiated Emissions Test Configuration A FCC ID: QGS6252009August 2002, Rev. 2 Page 19 of 31 Radiated Emissions Test ConfigurationRadiated Emissions Test Configuration A FCC ID: QGS6252009August 2002, Rev. 2 Page 20 of 31 Radiated Emissions Test ConfigurationRadiated Emissions Test Configuration A FCC ID: QGS6252009August 2002, Rev. 2 Page 21 of 31 Radiated Emissions Test ConfigurationRadiated Emissions Test Configuration A FCC ID: QGS6252009August 2002, Rev. 2 Page 22 of 31 Conducted Emissions Test ConfigurationConducted Emissions Test Configuration A FCC ID: QGS6252009August 2002, Rev. 2 Page 23 of 31 Conducted Emissions Test ConfigurationConducted Emissions Test Configuration