QI3BIL-4500VNOZ4G/LTE VoIP Wireless-N VPN Broadband Router

BiPAC 6300VNOZ VoIP Wireless-N VPN Broadband Router User Manual Version Released: 1.02b.rc6.dt5 Last Revised Date: October 30, 2013 Table of Contents Chapter 1................................................................................................................................................................1 1.1 Introducing the BIPAC 6300VNOZ................................................................................................................1 1.2 Features of the BIPAC 6300VNOZ ................................................................................................................3 Network Protocols and Features....................................................................................................................3 Firewall...........................................................................................................................................................3 Quality of Service Control...............................................................................................................................4 Wireless LAN...................................................................................................................................................4 VoIP.................................................................................................................................................................4 USB Application Server...................................................................................................................................4 IPTV Applications............................................................................................................................................4 Management..................................................................................................................................................4 1.3 Hardware Specifications ...............................................................................................................................5 Physical Interface ............................................................................................................................................5 1.4 Applications for the BIPAC 630 0VNOZ.........................................................................................................6 Chapter 2 ................................................................................................................................................................7 2.1 Important note for using the BIPAC 6300VNOZ ..........................................................................................7 2.2 Package Contents.........................................................................................................................................8 2.3 The Front LEDs..............................................................................................................................................9 2.4 The Rear Ports............................................................................................................................................11 2.5 Power S ource .............................................................................................................................................12 2.6 Cabling........................................................................................................................................................14 Chapter 3..............................................................................................................................................................15 3.1 Before Configuration ..................................................................................................................................15 3.1.1 Confi guring a PC in Windows 7 ...........................................................................................................16 3.1.2 Confi guring a PC in Windows Vista......................................................................................................19 3.1.3 Confi guring a PC in Windows XP .........................................................................................................21 3.1.4 Confi guring a PC in Windows 2000 .....................................................................................................23 3.1.5 Configuring a PC in Windows 98/Me...................................................................................................24 3.1.6 Configuring a PC in Windows NT4.0....................................................................................................25 3.2 Factory Default Settings.............................................................................................................................26 3.2.1 Username and Password .....................................................................................................................26 3.3 LAN Port Addresses ....................................................................................................................................27 3.4 Information from your ISP .........................................................................................................................27 Chapter 4 ..............................................................................................................................................................28 4.1 C onfiguring BIPAC 6300VNOZ with your Web Browser.............................................................................28 4.2 Status ..........................................................................................................................................................30 4.2.1 Device Info...........................................................................................................................................31 4.2.2 System Log.......................................................................…

Text truncated - open the document above for the full version.

55 WPS Settings WPS (Wi-Fi Protected Setup) feature is a standard protocol created by Wi-Fi Alliance. This feature greatly simplifies the steps needed to create a Wi-Fi networks for a residential or an office setting. WPS supports 2 types of configuration methods which are commonly known among consumers: PIN Method & PBC Method. WPS State: Display whether the WPS is configured or unconfigured. WPS Mode: Select the mode which to start WPS, choose between PIN Code and PBC (Push Button). Selecting Pin Code mode will require you to know the enrollee PIN code. To future understand the two modes of configuration; please refer to the following Wi-Fi Protected Setup. Wi-Fi Protected Setup PIN Method: Configure AP as Registrar 1. Jot down the client’s Pin (eg. 04640776). 2. Enter the Enrollee(Client) PIN code and then press Start WPS. 56 3. Launch the wireless client’s WPS utility (eg. Ralink Utility). Set the Config Mode as Enrollee, press the WPS button on the top bar, select the AP (eg. Billion_AP) from the WPS AP List column. Then press the PIN button located on the middle left of the page to run the scan. 57 4. The client’s SSID and security setting will now be configured to match the SSID and security setting of the registrar (router). 58 PIN Method: Configure AP as Enrollee 1. Jot down the WPS PIN (eg. 03454435).Press Start WPS. 59 2. Launch the wireless client’s WPS utility (eg. Ralink Utility). Set the Config Mode as Registrar. Enter the PIN number in the PIN Code column then choose the correct AP (eg. Billion_AP) from the WPS AP List before pressing the PIN button to run the scan. 60 3. The router’s (AP’s) SSID and security setting will now be configured to match the SSID and security setting of the registrar (client). 4. Now to make sure that the setup is correctly done, cross check to see if the SSID and the security setting of the registrar setting match with the parameters found on both Wireless Configuration and Wireless Security Configuration page. 61 PBC Method: 1. Press the PBC radio button, Then Start WPS. 2. Launch the wireless client’s WPS Utility (eg. Ralink Utility). Set the Config Mode as Enrollee. Then press the WPS button and choose the correct AP (eg. Billion_AP) from the WPS AP List section before pressing the PBC button to run the scan. 62 3. When the PBC button is pushed, a wireless communication will be established between your router and the PC. The client’s SSID and security setting will now be configured to match the SSID and security setting of the router. 63 Security Settings Security Type: You can disable or enable wireless security for protecting wireless network. The default type of wireless security is OPEN and to allow all wireless stations to communicate with the access points without any data encryption. To prevent unauthorized wireless stations from accessing data transmitted over the network, the router offers secure data encryption, known as WEP and WPA. There are five alternatives to select from: WEP 64-bit, WEP 128-bit, WPA-PSK, WPA2-PSK, Mixed WPA/WPA2-PSK. If you require high security for transmissions, please select WPA-PSK, WPA2-PSK or WPA/WPA2-PSK.  WEP WEP Authentication Method: WEP authentication method, there are two methods of authentication used, Open System authentication (OPENWEB) and Share Key authentication (SHAREDWEB). We suggest you select OPENWEB. Key 1 to Key 4: Enter the key to encrypt wireless data. To allow encrypted data transmission, the WEP Encryption Key values on all wireless stations must be the same as the router. There are four keys for your selection. The input format is in HEX style, 5 and 13 HEX codes are required for 64-bitWEP and 128-bitWEP respectively. If you chose WEP 64-bit, then enter any 5 ASCII characters or 10 hexadecimal characters ("0-9", "A-F"). If you chose WEP 128-bit, then enter 13 ASCII characters or 26 hexadecimal characters ("0-9", "A-F"). You must configure all four keys, but only one key can be activated at any one time. The default key is key 1. Note: When you enable WPS function, this WEP function will be invalid. And if you select one of WEP-64Bits/ WEP-128Bits, the following prompt box will appear to notice you. 64  WPA-PSK & WPA2-PSK WPA Algorithms: TKIP (Temporal Key Integrity Protocol) or AES (Advanced Encryption System) utilizes a stronger encryption method and incorporates Message Integrity Code (MIC) to provide protection against hackers. Pre-Shared key: The key for network authentication. The input format should be 8-63 ASKII characters or 64 hexadecimal characters Key Renewal Interval: The time interval for changing the security key automatically between wireless client and AP. WDS Settings WDS (Wireless distributed system) is a wireless access point mode that enables wireless link and communication with other access point. It is easy to be installed, just define the peer’s MAC of the connected AP. WDS Mode: select Activated to enable WDS feature and Deactivated to disable this feature. MAC Address: Enter the AP MAC addresses (in XX:XX:XX:XX:XX:XX format) of the peer connected AP. 65 4.4.1.4 Wireless MAC Filter The MAC filter screen a llows you to configure the router to give exclusive access to up to 8 devices (Allow Association) or exclude up to 8 devices from accessing the router (Deny Association). Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:AA:BB:00:00:02. You need to know the MAC address of the devices to configure this screen. SSID Index: Select the targeted SSID you want the MAC filter rules to apply to. Active: Select Activated to enable MAC address filtering. Action: Define the filter action for the list of MAC addresses in the MAC address filter table. Select Deny to block access to the AP, MAC addresses not listed will be allowed to access the router. Select Allow to permit access to the router, MAC addresses not listed will be denied …

Text truncated - open the document above for the full version.

Product Number: IVX0053-B35BX Product Name: Antenna Page 1 Specification For Approval Date: 2013 / 08 / 13 File No.: 1308130010 Version: 1.0 Customer： 盛達電業股份有限公司 Customer P/N： / INVAX P/N： IVX0053-B35BX Description : Antenna Cortec Checked By: Customer Approved By: INVAX System Technology Corp. Cortec Technology Inc. 4F. No. 815.Chung Hsiao East Rd.,Sec.5 Xian-Xi Industrial, Sha-Tou Administration Zone, Taipei, TAIWAN Chang-An Town, Dong-Guan City, Guangdong Province, China TEL:886-2-2788-5218 FAX:886-2-2783-1658 TEL:86-769-85388261 FAX:86-769-85317869 htt p://www.invaxsystem.com http://www.cortec.com.cn Product Number: IVX0053-B35BX Product Name: Antenna Page 2 Index: 1. Revision History / Page 3 2. Specification / Page 4 3. Characteristics and Reliability Test / Page 5 4. Antenna - S Parameter Test Data / Page 6 5. Antenna - Radiation Pattern Test Data / Page 7 6. Mechanical and Packing Drawing / Page 8 ~ 9 7. Material Description and RoHS Test Report / Page 10 ~ end Product Number: IVX0053-B35BX Product Name: Antenna Page 3 1. Revision History Revision Date Change NotificationDescription 1.0 2013.08.13 Product Number: IVX0053-B35BX Product Name: Antenna Page 4 2. Specification Sample Photo A. Electrical Characteristics Frequency 2400 ~ 2500 MHz S.W.R. <= 2.0 Return Loss <-10dB Antenna Gain 2.0 ± 0.7dBi Efficiency 50% Polarization Linear Impedance 50 Ohm B. Material & Mechanical Characteristics Material of Radiator PCB Cable Type O.D. 1.13 mm Connector Type Mini Connector Connector Pull Test >= 1 Kg C. Environmental Operation Temperature - 40 ̊C ~ + 65 ̊C Storage Temperature - 40 ̊C ~ + 80 ̊C Product Number: IVX0053-B35BX Product Name: Antenna Page 5 3. Characteristics and Reliability Test Test Items Test Condition and Procedure Requirements C1 S.W.R. Set DUT on Network Analyzer; make individual calibration to test Directive DUT specification C2 Antenna Gain Set DUT on Antenna Chamber; make individual calibration to test Directive DUT specification M1 Vibration GB / T2423 . 48-1997 Amplitude: 0.03 inch (1.5mm); Freq: 20 to 80 to 20 Hz 3 directions; 2 hours for each direction 1. No Visual Damage 2. Frequency Tol.<= 5% M2 Random Drop GB / T2423.8-1995 Height: 1.0 Meter; 3 directions; 1 time for each direction 1. No parts separated 2. Frequency Tol.<= 5% M3 Solderability GB 2423 . 28- 82 Solder iron: 260±5°C; Duration: 5 seconds 1. Mounted on PCB 2. No Visual Damage M4 Terminal- Pull Test Holding with individual specification; force applied to axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M5 Terminal- Torque Test Holding with individual specification; applied clockwise and counterclockwise to the axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M6 Dimension Inspection of dimension, color, material, package, surface process Directive DUT specification E1 Salt Spray GB / T 2423 . 17- 93 Temp: 35°C; RH: >= 95%; NaCl solution: >= 5%; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E2 Humidity GB / T 2423 . 4 - 93 Temp: 80°C / 12 H; -40°C / 12H RH: >= 90%; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E3 Thermal Shock GB / T 2423 . 22 - 87 1 Cycle: - 40°C (30 minutes) to + 80°C (30 minutes) Cycles: 24 After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E4 Life (High Temp.) GB /T 2423 . 2 - 89 Temp: 80°C; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% R1 RoHS With Reference to IEC 62321:2008 with flow chart Directive RoHS 2011/65/EU R2 PFOS With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC R3 PFOA With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC Product Number: IVX0053-B35BX Product Name: Antenna Page 6 4. Antenna - S Parameter Test Data Product Number: IVX0053-B35BX Product Name: Antenna Page 7 5. Antenna - Radiation Pattern Test Data Total Point Values Ant. Port Input Pwr. (dBm) Tot. Rad. Pwr. (dBm) Peak EIRP (dBm) Directivity (dBi) Efficiency (dB) Efficiency (%) Gain (dBi) Frequency (MHz) 2400 0 -4.27246 1.74643 6.01889 -3.27246 48.3899 1.74643 2420 0 -3.9997 1.96812 5.96782 -2.9997 51.8135 1.96812 2440 0 -4.25046 1.5296 5.78006 -3.15046 48.5797 2.1296 2460 0 -4.34411 1.32026 5.66437 -2.84411 52.778 2.02026 2480 0 -4.74339 0.945859 5.68925 -2.74339 53.5476 1.945859 2500 0 -5.20315 0.763499 5.96665 -3.20315 48.4776 2.363499 6. Mechanical Drawing See attached files 7. Material Description and RoHS Test Report See attached files Total Power (dBm) -25 5 -20 -15 -10 -5 0 X Y Z Azimuth = 0.0 El e va ti on = 0. 0 Roll = 0.0 B C D APPROVERDATESIGNDESCRIPTION Note: 1.Take" ＊ "is the important dimension. 2.Tolerance:Unmarked tolerance refer to the standard tolerance please. ＊ IVX0053-B35BX / Embedded Antenna 2/1 ±0.3 ±0.2 ±1 SONY-G9000 FR4 OD1.13 Part Number Name HF-GS-IVX0053-A Adhesive IVX0053-B01 PCB Coaxial Cable R-CB-113B 1 No. 2 3 1 1 Q'ty 1 MaterialFinish Green T=0.6mm Black 40*5.5mm A Seagold 2013/04/18 SCALE: APP BY Tolerance X.XX X.X X° TITLE: PART NO.: CUSTOMER P/N: CHK BYDES BY Cortec Technology Inc. Tel :886-2-27885218 Http://www.invaxsystem.com Fax:886-2-27831658 E-mail:[email protected] RF BY UNITS: mm REVISION: ★★★★☆ ＊ ＊ ＊ ＊ ＊ Jack 2013/04/18 Grant 2013/04/18 SiFei 2013/04/18 ＊ Cu CI-113 Connector4 1 I-pex connector 填表： 時麗 部門： 研發部 職務： 文員 Cd Pb Hg Cr(VI) PBBs PBDEs 1 IVX0053-B01 PCB FR4 N.D. 7 N.D. N.D. N.D. N.D. CANEC1210051902 2012.08.03 KB-6160 SGS 2 HF-GS-IVX0053-A Adhesive G9000 N.D. N.D. N.D. N.D. N.D. N.D. CE/2013/16248 2013.02.05 ADHESIVE SGS 3 黑色色母 N.D. N.D. N.D. N.D. N.D. N.D. HKGEC1201335502 2012.11.16 FCM H-1372 BLACK SGS 4 FEP N.D. N.D. N.D. N.D. N.D. N.D. RLSHE001125120002C 2012.08.21 电线电缆料 CTI 5 鍍錫銅 N.D. N.D. N.D. Negative N.D. N.D. RLSHE001125120004C 2012.08.21 电线电缆料 CTI 6 鍍銀銅 N.D. N.D. N.D. Negative N.D. N.D. RLSHE001125120003C 2012.08.21 电线电缆料 CTI 7 PBT 黑色 N.D N.D N.D N.D N.D N.D CE/2012/91068A 2012.09.17 MHFPLUGHOUSING SGS 8 銅鍍金 N.D 17 N.D Negative CE/2013/10248…

Text truncated - open the document above for the full version.

Product Number: AN8921F-9219SM Product Name: Antenna Page 1 Version: 1.0 Issue Date: 2013-05-22 Specification For Approval Date: 2013 / 07 / 01 File No.: 130701002 Version: 1.0 Customer： 盛達電業股份有限公司 Customer P/N： AAZANDXSXAN8921F00 INVAX P/N： AN8921F-9219SM Description : Antenna Cortec Checked By: Customer Approved By: INVAX System Technology Corp. Cortec Technology Inc. 4F. No. 815.Chung Hsiao East Rd.,Sec.5 Xian-Xi Industrial, Sha-Tou Administration Zone, Taipei, TAIWAN Chang-A n Town, Dong-Guan City, Guangdong Province, China TEL:886-2-2788-5218 FAX:886-2-2783-1658 TEL:86-76 9-85388261 F AX:86-769-85317869 htt p://www.invaxsystem.com http://www.cortec.com.cn Product Number: AN8921F-9219SM Product Name: Antenna Page 2 Version: 1.0 Issue Date: 2013-05-22 Index: 1. Revision History / Page 3 2. Specification / Page 4 3. Characteristics and Reliability Test / Page 5 4. Antenna - S Parameter Test Data / Page 6 5. Antenna - Radiation Pattern Test Data / Page 7 ~ 11 6. Mechanical and Packing Drawing / Page 12 ~ 13 7. Material Description and RoHS Test Report / Page 14 ~ end Product Number: AN8921F-9219SM Product Name: Antenna Page 3 Version: 1.0 Issue Date: 2013-05-22 1. Revision Histor Revision Date Change NotificationDescription 1.0 2013.07.01 Product Number: AN8921F-9219SM Product Name: Antenna Page 4 Version: 1.0 Issue Date: 2013-05-22 2. Specification Sample Photo A. Electrical Characteristics Frequency 824 ~ 960 MHz 1710 ~ 2170 MHz S.W.R. <= 2.0 @ 880 MHz <= 2.0 @ 1880 MHz Antenna Gain ≧ 2.0± 0.5dBi @ 824 ~ 960 MHz ≧ 1.0± 0.5dBi @ 1710 ~ 2170 MHz Polarization Linear Impedance 50 Ohm B. Material & Mechanical Characteristics Material of Radiator Cu Material of Plastic Body: TPEE Hinge: ABS Holder: ABS Cable Type RG-178 Connector Type SMA Male Connector Pull Test >= 5Kg C. Environmental Operation Temperature - 40 ̊C ~ + 65 ̊C Storage Temperature - 40 ̊C ~ + 80 ̊C Antenna Color Storage life < 2 year Product Number: AN8921F-9219SM Product Name: Antenna Page 5 Version: 1.0 Issue Date: 2013-05-22 3. Characteristics and Reliability Test Test Items Test Condition and Procedure Requirements C1 S.W.R. Set DUT on Network Analyzer; make individual calibration to test Directive DUT specification C2 Ant enna Gain Set DUT on Antenna Chamber; make individual calibration to test Directive DUT specification M1 Vibration GB / T2423 . 48-1997 Amplitude: 0.03 inch (1.5mm); Freq: 20 to 80 to 20 Hz 3 directions; 2 hours for each direction 1. No Visual Damage 2. Frequency Tol.<= 5% M2 Rand om Drop GB / T2423.8-1995 Height: 1.0 Meter; 3 directions; 1 time for each direction 1. No parts separated 2. Frequency Tol.<= 5% M3 Solderability GB 2423 . 28- 82 Solder iron: 260±5°C; Duration: 5 seconds 1. Mounted on PCB 2. No Visual Damage M4 T erminal- Pull Test Holding with individual specification; force applied to axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M5 T erminal- Torque Test Holding with individual specification; applied clockwise and counterclockwise to the axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M6 Dimension Inspection of dimension, color, material, package, surface process Directive DUT specification E1 Salt Spray GB / T 2423 . 17- 93 Temp: 35°C; RH: >= 95%; NaCl solution: >= 5%; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E2 Humidity GB / T 2423 . 4 - 93 Temp: 80°C / 12 H; -40°C / 12H RH: >= 90%; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E3 Thermal Shock GB / T 2423 . 22 - 87 1 Cycle: - 40°C (30 minutes) to + 80°C (30 minutes) Cycles: 24 After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E4 Life (High Temp.) GB /T 2423 . 2 - 89 Temp: 80°C; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% R1 RoHS With Reference to IEC 62321:2008 with flow chart Directive RoHS 2011/65/EU R2 PFOS With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC R3 PFOA With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC Product Number: AN8921F-9219SM Product Name: Antenna Page 6 Version: 1.0 Issue Date: 2013-05-22 4. Antenna - S Parameter Test Data Product Number: AN8921F-9219SM Product Name: Antenna Page 7 Version: 1.0 Issue Date: 2013-05-22 5. Antenna - Radiation Pattern Test Data Testing Equipment Specification: Antenna Anechoic Chamber Dimension: 8 x 4 x 4 m Quite Zone: 600mm @1 GHz Isolation: >100dB @ 1 MHz ~ 10 GHz Testing Equipment: Agilent 5071B Received Antenna: 0.7 ~ 6.0 GHz for Gain Calibration Double Ridged Horn Antenna 6. Mechanical Drawing See attached files 7. Material Description and RoHS Test Report See attached files 填表： 時麗 部門： 研發部 職務： 文員 Cd Pb Hg Cr(VI) PBBs PBDEs 1 AN9201-04B Body TPEE N.D. N.D. N.D. N.D. N.D. N.D. RLSZD001081200002C 2012.10.10 TPEE SGS 2 AN9201-07B Body2 ABS N.D. N.D. N.D. N.D. N.D. N.D. KA/2012/C1575 2013.01.02 ACRYLONITRILE SGS 3 AN0304-T07B Body1 ABS N.D. N.D. N.D. N.D. N.D. N.D. KA/2012/C1575 2013.01.02 ACRYLONITRILE SGS 4 SMA194-CCT5AN19-A SMA Male 銅 66 31000 N.D. Negative CE201314616 2013.01.28 FREECUTTINGBRASSBAR SGS 5 R-AN44340 R-AN6063555 Tube 銅 N.D. 14 N.D. Negative N.D. N.D. CANML1216541101 2012.12.05 C2700 SGS 6 AN20-45 EVA EVA N.D. 62 N.D. N.D. N.D. N.D. CANEC1303102105 2013.03.19 EVA+gum. SGS 7 FEP N.D. N.D. N.D. N.D. N.D. N.D. RLSHE001125120002C 2012.08.21 电线电缆料 CTI 8 PTFE N.D. N.D. N.D. N.D. N.D. N.D. RLSHE001125120001C 2012.08.21 电线电缆料 CTI 9 鍍銀銅 N.D. N.D. N.D. Negative N.D. N.D. RLSHE001125120003C 2012.08.21 电线电缆料 CTI 物料型號 包裝材料中鉛、鎘、汞、六價鉻總含量不超過 100ppm ，鎘的允許濃度為 5ppm 物料各構成名稱 測試機構名 稱 根據測試報告如實填寫鉛、鎘、汞、六價鉻、 PBBs 和 PBDEs 六項禁用物質的含量 序號 R-RG-178U Cable RG178 測試日期 歐盟ROHS指令豁免條款2009/95/BC、钢中合金元素中的铅含量达0.35%、铝含量达0.4%、铜合金中的铅含量达4% COR/F-G-47a 康捷電子有限公司 物料名稱：AN8921F-9219SM 各構成物料 的材質 物料中 HSF 對象物質含量調查表 測試名稱 測試報告裡 RoHS 對應物質測試結果 檢測報告編號 ABS Component - Plastics E56070 CHI MEI CORPORATION 59-1 SAN CHIA, JEN TE, TAINAN HSIEN 717 TW PA-757(+) Acrylonitrile Butadiene Styrene (ABS), "Polylac", fur…

Text truncated - open the document above for the full version.

Product Number: AN0727-13B03SM Product Name: Antenna Page 1 Specification For Approval Date: 2013 / 07 / 01 File No.: 130701001 Version: 1.0 Customer： 盛達電業股份有限公司 Customer P/N： AAZANDXSXAN0727101 INVAX P/N： AN0727-13B03SM Description : Antenna Cortec Checked By: Customer Approved By: INVAX System Technology Corp. Cortec Technology Inc. 4F. No. 815.Chung Hsiao East Rd.,Sec.5 Xian-Xi Industrial, Sha-Tou Administration Zone, Taipei, TAIWAN Chang-A n Town, Dong-Guan City, Guangdong Province, China TEL:886-2-2788-5218 FAX:886-2-2783-1658 TEL:86-76 9-85388261 F AX:86-769-85317869 http://www.invaxsystem.com http://www.cortec.com.cn Product Number: AN0727-13B03SM Product Name: Antenna Page 2 Index: 1. Revision History / Page 3 2. Specification / Page 4 3. Characteristics and Reliability Test / Page 5 4. Antenna - S Parameter Test Data / Page 6 5. Antenna - Radiation Pattern Test Data / Page 7 ~ 10 6. Mechanical and Packing Drawing / Page 11 ~ 12 7. Material Description and RoHS Test Report / Page 13 ~ end Product Number: AN0727-13B03SM Product Name: Antenna Page 3 1. Revision History Revision Date Change NotificationDescription 1.0 2013.07.01 Product Number: AN0727-13B03SM Product Name: Antenna Page 4 2. Specification Sample Photo A. Electrical Characteristics Frequency 700 ~ 960 MHz 1710 ~ 2700 MHz S.W.R. <= 3.5 @ 700 ~ 960 MHz <= 4.0 @ 1710 ~ 2700 MHz Antenna Gain 1.0 ± 0.7dBi @ low Band 1.0 ± 0.7dBi @ High Band Polarization Linear Impedance 50 Ohm B. Material & Mechanical Characteristics Material of Radiator Cu Material of Plastic TPE & ABS Cable Type RG-178 Connecter Type SMA Male Pull Test >= 5 Kg C. Environmental Operation Temperature - 40 ̊C ~ + 65 ̊C Storage Temperature - 40 ̊C ~ + 80 ̊C Product Number: AN0727-13B03SM Product Name: Antenna Page 5 3. Characteristics and Reliability Test Test Items Test Condition and Procedure Requirements C1 S.W.R. Set DUT on Network Analyzer; make individual calibration to test Directive DUT specification C2 Antenna Gain Set DUT on Antenna Chamber; make individual calibration to test Directive DUT specification M1 Vibration GB / T2423 . 48-1997 Amplitude: 0.03 inch (1.5mm); Freq: 20 to 80 to 20 Hz 3 directions; 2 hours for each direction 1. No Visual Damage 2. Frequency Tol.<= 5% M2 Random Drop GB / T2423.8-1995 Height: 1.0 Meter; 3 directions; 1 time for each direction 1. No parts separated 2. Frequency Tol.<= 5% M3 Solderability GB 2423 . 28- 82 Solder iron: 260±5°C; Duration: 5 seconds 1. Mounted on PCB 2. No Visual Damage M4 Terminal- Pull Test Holding with individual specification; force applied to axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M5 Terminal- Torque Test Holding with individual specification; applied clockwise and counterclockwise to the axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M6 Dimension Inspection of dimension, color, material, package, surface process Directive DUT specification E1 Salt Spray GB / T 2423 . 17- 93 Temp: 35°C; RH: >= 95%; NaCl solution: >= 5%; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E2 Humidity GB / T 2423 . 4 - 93 Temp: 80°C / 12 H; -40°C / 12H RH: >= 90%; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E3 Thermal Shock GB / T 2423 . 22 - 87 1 Cycle: - 40°C (30 minutes) to + 80°C (30 minutes) Cycles: 24 After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E4 Life (High Temp.) GB /T 2423 . 2 - 89 Temp: 80°C; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% R1 RoHS With Reference to IEC 62321:2008 with flow chart Directive RoHS 2011/65/EU R2 PFOS With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC R3 PFOA With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC Product Number: AN0727-13B03SM Product Name: Antenna Page 6 4. Antenna - S Parameter Test Data Product Number: AN0727-13B03SM Product Name: Antenna Page 7 5. Antenna - Radiation Pattern Test Data Testing Equipment Specification: Antenna Anechoic Chamber Dimension: 8 x 4 x 4 m Quite Zone: 600mm @1 GHz Isolation: >100dB @ 1 MHz ~ 10 GHz Testing Equipment: Agilent 5071B Received Antenna: 0.7 ~ 6.0 GHz for Gain Calibration Double Ridged Horn Antenna 6. Mechanical Drawing See attached files 7. Material Description and RoHS Test Report See attached files 填表： 時麗 部門： 研發部 職務： 文員 Cd Pb Hg Cr(VI) PBBs PBDEs 1 AN13B-01B Body TPEE N.D. N.D. N.D. N.D. N.D. N.D. RLSZD001081200002C 2012.10.10 TPEE CTI 2 AN9101-02B Body2 ABS N.D. N.D. N.D. N.D. N.D. N.D. KA/2012/C1575 2013.01.02 ACRYLONITRILE SGS 3 SMA207-CCT5AN19-A SMA Male 銅 66 31000 N.D. Negative CE201314616 2013.01.28 R EECUTTINGBRASSB A SGS 4 AN13B7070 HAT EVA N.D. N.D. N.D. N.D. N.D. N.D. CANEC1303661001 2013.03.28 HEAT SHRINKABLE SGS 5 R-HSTUBE-004N HSTUBE 鋅合金 N.D. 15 N.D. Negative N.D. N.D. A001R121106068001-1 2012.11.09 锌合金锭 AOV 6 FEP N.D. N.D. N.D. N.D. N.D. N.D. RLSHE001125120002C 2012.08.21 电线电缆料 CTI 7 PTFE N.D. N.D. N.D. N.D. N.D. N.D. RLSHE001125120001C 2012.08.21 电线电缆料 CTI 8 鍍銀銅 N.D. N.D. N.D. Negative N.D. N.D. RLSHE001125120003C 2012.08.21 电线电缆料 CTI 歐盟ROHS指令豁免條款2009/95/BC、钢中合金元素中的铅含量达0.35%、铝含量达0.4%、铜合金中的铅含量达4% COR/F-G-47a 包裝材料中鉛、鎘、汞、六價鉻總含量不超過 100ppm ，鎘的允許濃度為 5ppm 測試日期 物料型號 物料各構成名 稱 測試機構 名稱 序號 根據測試報告如實填寫鉛、鎘、汞、六價鉻、 PBBs 和 PBDEs 六項禁用物質的含量 R-RG-178U Cable (RG178) 康捷電子有限公司 物料名稱： AN0727-13B03SM 各構成物料的材質 物料中 HSF 對象物質含量調查表 測試名稱 測試報告裡 RoHS 對應物質測試結果 檢測報告編號 ABS Component - Plastics E56070 CHI MEI CORPORATION 59-1 SAN CHIA, JEN TE, TAINAN HSIEN 717 TW PA-757(+) Acrylonitrile Butadiene Styrene (ABS), "Polylac", furnished as pellets Min Thk Flame RTI RTI RTI Color (mm) Class HWI HAI Elec Imp Str ALL 1.5 HB 4 0 85 80 85 3.0 HB 3 0 85 80 85 Comparative Tracking Index (CTI): 0 Dimensional Stability (%): - High-Voltage Arc Tracking Rate (HVTR): 1 High Volt, Low Current Arc Resis (D495): 7 Dielectric Strength (kV/mm): - Volume Resistivity (10 x ohm-cm) : - (+) - Optional prefix or suffix; may be used to denote usage of 0-0…

Text truncated - open the document above for the full version.