QKC3003TRACTORCAM S

TractorCamS Operation flow Key Features & Functionality •support up to 200 meter ofSecured video transmissions •Wireless Monitor with 7” LCD screen, support Video display from rear-view camera up to VGA@25FPS (Single Camera); or QVGA@20fps (Multiple Camera) •Support up to 4 camera connection, with Rear-camera fixed at CH1 •Wireless monitor support CH auto-switch functions, with a signal trigger cable connect from the monitor to the power switch of the rear-gear warning light; whenever the rear- gear is selected, wireless monitor will auto-switch to CH1 for rear-viewing, and switch back to previous selected CH when R-gear is no longer selected. •Camera Support DC Power input from 12~48V,and Monitor Support DC Power input from 6~48V so this system can be installed to any type of car battery. •Individual Camera Brightness Setting is available to suit different user installation environment •Video from each connected cameras can be display in the monitor in normal mode or Mirror mode (The “M” Sign will be display in the screen) individually. •Monitor support IR remote controller for easy operation. Assembly to Car 7” LCD Monitor Assembly to car 7” LCD Wireless Receiver 1. Pairing Indicator 2.Power Indicator 3.Channel Switch( CH1, CH2, CH3, CH4 ) 4.Enter Manual Key 5.Scan On/Off Key (Scan from CH1,CH2,CH3,CH4) 6.Quad mode On/Off 7.IR 8.DC IN 9.Trigger for back camera (Once Car back light been started, Monitor been triggered to play the back camera’s image) 10.Power On/Off 11. Antenna 1 2 3 4 5 6 7 89 10 11 1 EXIT Exit Menu Scan3/8/15SAuto Scan Interval Time Setting CAM1 On/Off/ MirrorSelect Camera on/off/mirror CAM2 On/Off/ MirrorSelect Camera on/off/mirror CAM3 On/Off/ Mirror Select Camera on/off/mirror CAM4 On/Off/ Mirror Select Camera on/off/mirror Pair CAM 1 2 3 4Pair Selected CH Brightness Settings Enter Brightness setting (New Page will be display) Version Check Check Current Software Version (Photo 3) Factory ResetRestore Factory Reset Brightness Setting Menu:（Photo 2） EXIT Return o main menu Monitor 08Brightness Control (Level 01~15) CAM1 08 Brightness Control (Level 01~ 15) CAM2 08Brightness Control (Level 01~ 15) CAM3 08Brightness Control (Level 01~ 15) CAM4 08 Brightness Control (Level 01~ 15) 2 3 CRV8-M701R Car Rear-viewing SystemOperation flow Assembly to Car This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE MAN UFAC TURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFIC ATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHO RITY TO OPERATE THE EQUIPMENT. To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Reference No.: WT12117236-D-S-F Page 36 of 43 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 16 Photographs - Constructional Details 16.1 EUT –Appearance View Reference No.: WT12117236-D-S-F Page 37 of 43 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Reference No.: WT12117236-D-S-F Page 38 of 43 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

FCC Label Location for model: 3003 The Label m ust not be a stick-on paper. The Label on these products must be perm anently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily det achabl e. FCC ID: QKC3003 This device c omplies with Pa rt 15 of th e FCC Rules. Oper ation is su bject to t he followin g two conditions: (1) this device may not caus e harmful i nterf erenc e, and (2) this devic e must accept any i nterf erenc e receiv ed, inclu ding interfer ence t hat m ay cause undesi red operatio n.

FCC Label Sampl e for model: 3003 FCC ID: QKC3003 This device com plies with Part 15 of the FCC Rules. Operati on is subject to the foll owi ng two conditions: (1) this device may not cause i nterference, and (2) this device must accept any interference, includi ng interference that may cause undesired operation of the devic e. FCC ID: QKC3003 This device c omplies with Pa rt 15 of th e FCC Rules. Oper ation is su bject to t he followin g two conditions: (1) this device may not caus e harmful i nterf erenc e, and (2) this devic e must accept any i nterf erenc e receiv ed, inclu ding interfer ence t hat m ay cause undesi red operatio n.

Reference No.: WT12117236-D-S-F Page 39 of 43 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 16.2 EUT – Open View 16.3 EUT – PCB View ANT Reference No.: WT12117236-D-S-F Page 40 of 43 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WT12117236-D-S-F Page 41 of 43 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 16.4 RF –Module View Reference No.: WT12117236-D-S-F Page 42 of 43 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WT12117236-D-S-F Page 1 of 43 FCC TEST REPORT Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn FCC ID :QKC3003 Applicant : LUDA Elektronik AB Address : Aschebergsgatan 46, 411 33 Goteborg, Sweden Manufacturer : LUDA Elektronik AB Address : Aschebergsgatan 46, 411 33 Goteborg, Sweden Equipment Under Test (EUT) : Product Name : TractorCam S Model No. : 3003 Rules : FCC CFR47 Part 15 Section 15.247:2010 Date of Test : Nov. 07, 2012 Date of Issue : Nov. 21 2012 Test Result : PASS Remark: * The sample described above has been tested to be in compliance with the requirements of ANSI C63.4:2003. The test results have been reviewed and comply with the rules listed above and found to meet their essential requirements. The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Services (Shenzhen) Co., Ltd. 1/F, Fukangtai Building, West Baima Rd., Songgang Street, Baoan District, Shenzhen 518105, China Tel: +86-755-83551033 Fax: +86-755-83552400 Compiled by: Approved by: Zero Zhou / Project Engineer Philo Zhong / Manager Reference No.: WT12117236-D-S-F Page 2 of 43 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 2 Test Summary Test Items Test Requirement Result Radiated Emissions 15.205(a) 15.209 15.247(d) PASS 20dB Bandwidth 15.247(a)(1) PASS Maximum Peak Output Power 15.247(b)(1) PASS Frequency Separated 15.247(a)(1) PASS Hopping Channel Number 15.247(a)(1)(iii) PASS Dwell time 15.247(a)(1)(iii) PASS Antenna Requirement 15.203 PASS Maximum Permissible Exposure (Exposure of Humans to RF Fields) 1.1307(b)(1) PASS Reference No.: WT12117236-D-S-F Page 3 of 43 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 3 Contents Page 1 COVER PAGE ....................................................................................................................... 1 2 TEST SUMMARY ......................................................................................................................................................... 2 3 CONTENTS .................................................................................................................................................................... 3 4 GENERAL INFORMATION ....................................................................................................................................... 5 4.1 GENERAL DESCRIPTION OF E.U.T........................................................................................................................5 4.2 DETAILS OF E.U.T. ................................................................................................................................................5 4.3 TEST FACILITY ........................................................................................................................................................5 4.4 TEST LOCATION ......................................................................................................................................................5 5 EQUIPMENT USED DURING TEST....................................................................................................................... 6 5.1 EQUIPMENTS LIST ...................................................................................................................................................6 5.2 MEASUREMENT UNCERTAINTY ..............................................................................................................................6 5.3 TEST EQUIPMENT CALIBRATION ............................................................................................................................6 6 RADIATED EMISSIONS ............................................................................................................................................ 7 6.1 EUT OPERATION : ..................................................................................................................................................7 6.2 TEST SETUP.............................................................................................................................................................8 6.3 SPECTRUM ANALYZER SETUP ..............................................................................................................................9 6.4 TEST PROCEDURE.................................................................................................................................................10 6.5 CORRECTED AMPLITUDE & MARGIN CALCULATION..........................................................................................10 6.6 SUMMARY OF TEST RESULTS .............................................................................................................................11 7 BAND EDGE MEASUREMENT .............................................................................................................................. 18 7.1 TEST RESULT: .......................................................................................................................................................19 8 20 DB BANDWIDTH MEASUREMENT ............................................................................................................... 21 8.1 TEST PROCEDURE: ...............................................................................................................................................21 8.2 TEST RESULT: .......................................................................................................................................................21 9 MAXIMUM PEAK OUTPUT POWER .................................................................................................................. 23 9.1 TEST PROCEDURE: ........................…

Text truncated - open the document above for the full version.

Reference No.: WT12117236-D-S-F Page 1 of 43 FCC TEST REPORT Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn FCC ID :QKC3003 Applicant : LUDA Elektronik AB Address : Aschebergsgatan 46, 411 33 Goteborg, Sweden Manufacturer : LUDA Elektronik AB Address : Aschebergsgatan 46, 411 33 Goteborg, Sweden Equipment Under Test (EUT) : Product Name : TractorCam S Model No. : 3003 Rules : FCC CFR47 Part 15 Section 15.247:2010 Date of Test : Nov. 07, 2012 Date of Issue : Nov. 21 2012 Test Result : PASS Remark: * The sample described above has been tested to be in compliance with the requirements of ANSI C63.4:2003. The test results have been reviewed and comply with the rules listed above and found to meet their essential requirements. The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Services (Shenzhen) Co., Ltd. 1/F, Fukangtai Building, West Baima Rd., Songgang Street, Baoan District, Shenzhen 518105, China Tel: +86-755-83551033 Fax: +86-755-83552400 Compiled by: Approved by: Zero Zhou / Project Engineer Philo Zhong / Manager Reference No.: WT12117236-D-S-F Page 2 of 43 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 2 Test Summary Test Items Test Requirement Result Radiated Emissions 15.205(a) 15.209 15.247(d) PASS 20dB Bandwidth 15.247(a)(1) PASS Maximum Peak Output Power 15.247(b)(1) PASS Frequency Separated 15.247(a)(1) PASS Hopping Channel Number 15.247(a)(1)(iii) PASS Dwell time 15.247(a)(1)(iii) PASS Antenna Requirement 15.203 PASS Maximum Permissible Exposure (Exposure of Humans to RF Fields) 1.1307(b)(1) PASS Reference No.: WT12117236-D-S-F Page 3 of 43 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 3 Contents Page 1 COVER PAGE ....................................................................................................................... 1 2 TEST SUMMARY ......................................................................................................................................................... 2 3 CONTENTS .................................................................................................................................................................... 3 4 GENERAL INFORMATION ....................................................................................................................................... 5 4.1 GENERAL DESCRIPTION OF E.U.T........................................................................................................................5 4.2 DETAILS OF E.U.T. ................................................................................................................................................5 4.3 TEST FACILITY ........................................................................................................................................................5 4.4 TEST LOCATION ......................................................................................................................................................5 5 EQUIPMENT USED DURING TEST....................................................................................................................... 6 5.1 EQUIPMENTS LIST ...................................................................................................................................................6 5.2 MEASUREMENT UNCERTAINTY ..............................................................................................................................6 5.3 TEST EQUIPMENT CALIBRATION ............................................................................................................................6 6 RADIATED EMISSIONS ............................................................................................................................................ 7 6.1 EUT OPERATION : ..................................................................................................................................................7 6.2 TEST SETUP.............................................................................................................................................................8 6.3 SPECTRUM ANALYZER SETUP ..............................................................................................................................9 6.4 TEST PROCEDURE.................................................................................................................................................10 6.5 CORRECTED AMPLITUDE & MARGIN CALCULATION..........................................................................................10 6.6 SUMMARY OF TEST RESULTS .............................................................................................................................11 7 BAND EDGE MEASUREMENT .............................................................................................................................. 18 7.1 TEST RESULT: .......................................................................................................................................................19 8 20 DB BANDWIDTH MEASUREMENT ............................................................................................................... 21 8.1 TEST PROCEDURE: ...............................................................................................................................................21 8.2 TEST RESULT: .......................................................................................................................................................21 9 MAXIMUM PEAK OUTPUT POWER .................................................................................................................. 23 9.1 TEST PROCEDURE: ........................…

Text truncated - open the document above for the full version.

Reference No.: WT12117236-D-S-F Page 34 of 43 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 15 Photographs – Test Setup 15.1 Photograph –Radiated Emissions Test Setup Below 30MHz 30MHz-1GHz Reference No.: WT12117236-D-S-F Page 35 of 43 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Above 1GHz