QL9-IPAD100-20Mobile computer with Bluetooth and Wireless

Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 77 of 102 Appendix H: Manual Please refer to the following pages. Regulatory Information- iPAD Radio Frequency Interference Requirements – U.S.A. This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the Federal Communications Commission Rules and Regulations. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial or residential environment. This equipment generates, uses, and radiates radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Re-orient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that which the receiver is connected • Contact a Fujitsu Service Technician for assistance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements – Canada To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment that is installed outdoors is subject to licensing. The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. This device complies with RSS 210 of Industry & Science Canada. “Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.” Option – RF Devices Fujitsu’s RF products are designed to be compliant with the rules and regulations in the locations into which they are sold and are labeled as required. The majority of Fujitsu’s RF devices are type approved and do not require the user to obtain license or authorization before using the equipment. Any changes or modification to Fujitsu equipment, not expressly approved by Fujitsu, could void the user’s authority to operate the equipment. "The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website http://www.hc-sc.gc.ca/rpb “ FCC RF Exposure Guidelines The radio module in this device has been evaluated under FCC Bulletin OET 65C and found compliant to the requirements as set forth in CFR Sections 2.1091, 2.1093, and 15.247(b)(4) addressing RF Exposure from radio frequency devices. The iPad contains an internal low-power radio whose radiated output power is far below the FCC radio frequency exposure limits. Nevertheless, the iPad shall be used in such a manner that the potential for human contact with the radio antenna during normal operation is minimized. The iPad should be utilized/worn in accordance with the instructions for the device. Specific Absorption Rate (SAR) Level The iPAD100-20 configured with the Samsung SWL-2460 WiFi radio and the Taiyo Yuden EYSNDYAXX Bluetooth module has been body SAR tested with the Fujitsu belt clip. The maximum SAR value measured was: Body-worn with Belt-Clip - Single Transmit - 0.016 W/kg Body-worn with Belt-Clip - BT Co-Transmit - 0.013 W/kg Use only Fujitsu approved peripheral devices. Option - Laser Devices This product contains a Class 2 laser and complies with US 21CFR1040.10. These type of lasers use a low power visible light diode. Care should be taken to avoid staring directly into the light. Laser power up to 1.2 mW at 650nm could be accessible in the interior. “CAUTION – use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure.” Scanner Safety Labeling Safety This product has been certified with Underwriters Laboratories for use in the United States and Canada.

Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 72 of 102 Appendix C: Confidentiality Request Letter Please refer to the following page. FUJITSU TRANSACTION SOLUTIONS INC. 10180 Barnes Canyon Road. San Diego, Ca 92121 U.S.A. Telephone: (858) 731-4719 Facsimile: (858) 731-4780 5/16/2006 American TCB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: The following information is to be held confidential pursuant of 47 CFR Part 0 §0.459 and Section 552(b)(4) of the Freedom of Information Act, because the information provided contains trade secrets and is proprietary. If made public, the information might be used to our disadvantage as in the market place. • Schematics • Technical Product Description • Block Diagram Sincerely, Dwayne Andrejczuk Regulatory Compliance Engineer

Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 71 of 102 Appendix B: Agency Authorization Letter Please refer to the following page. FUJITSU TRANSACTION SOLUTIONS INC. 10180 Barnes Canyon Road. San Diego, Ca 92121 U.S.A. Telephone: (858) 731-4719 Facsimile: (858) 731-4780 5/16/2006 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Please be advised that Fujitsu Transaction Solutions Inc. authorizes Rhein Tech Laboratories, Inc. to act on our behalf, until otherwise notified, for applications submitted to the Federal Communications Commission and/or American Telecommunications Certification Body, Inc. We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party to the application, as defined in 47 CFR 1.2002(b), is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Sincerely, Dwayne Andrejczuk Regulatory Compliance Engineer

August 2, 2006 RE: FCC ID: QL9-IPAD100-20_ATCB003817 Attention: Kathy Grzovic I have a few comments on this Application. Please note that further comments may arise in response to answers provided to the questions below. 1. Please note that the operational description (pdf page 7) states, “This module is still under development, thus specifications do not guarantee both the quality and reliability at the time of shipment, Since the specifications and mass production of the module are not confirmed either, the contents of the technical notes are subject to change without any prior notice.” Please note that certification must be on a final item that is representative of the manufactured device. The note in the operational description brings to question the ability of this device to be certified as is. Please explain and please provide documentation representative of the actual product being manufactured. 2. FYI – BT and WLAN devices are certified by the TCB only when approved test methods have been used. The approved test method for BT devices is DA000705 and the approved test method for WLAN devices is the DTS test method found in KDB document KDB558074. As the report does not give specific test methodologies other than ANSI C63.4, these test methods need to be stated in all reports for BT and WLAN approvals. To avoid possible confusion, please consider specifically listing the approved test methods in the reports. 3. Please note that the SAR report states that the belt clip keeps 2.9cm separation from the body. However, the photos show that the location of the antenna(s) themselves may actually be closer. Please explain and verify separation distances from the body and antenna. Dennis Ward mailto:[email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

August 2, 2006 RE: FCC ID: QL9-IPAD100-20_ATCB003817 Attention: Kathy Grzovic I have a few comments on this Application. Please note that further comments may arise in response to answers provided to the questions below. 1 Please note that the operational description (pdf page 7) states, “This module is still under development, thus specifications do not guarantee both the quality and reliability at the time of shipment, Since the specifications and mass production of the module are not confirmed either, the contents of the technical notes are subject to change without any prior notice.” Please note that certification must be on a final item that is representative of the manufactured device. The note in the operational description brings to question the ability of this device to be certified as is. Please explain and please provide documentation representative of the actual product being manufactured. Response: Please see the revised operational description uploaded with this response. 2 FYI – BT and WLAN devices are certified by the TCB only when approved test methods have been used. The approved test method for BT devices is DA000705 and the approved test method for WLAN devices is the DTS test method found in KDB document KDB558074. As the report does not give specific test methodologies other than ANSI C63.4, these test methods need to be stated in all reports for BT and WLAN approvals. To avoid possible confusion, please consider specifically listing the approved test methods in the reports. Response: Noted, thank you. A revised test report was uploaded with this response. 3 Please note that the SAR report states that the belt clip keeps 2.9cm separation from the body. However, the photos show that the location of the antenna(s) themselves may actually be closer. Response: Please refer to the revised SAR report uploaded with this response. Dennis Ward mailto:[email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 82 of 102 Appendix J: External Photographs Photograph 5: Front View Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 83 of 102 Photograph 6: Back View Photograph 7: Left Side Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 84 of 102 Photograph 8: Right Side Photograph 9: Battery

Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 73 of 102 Appendix D: Label and Label Location Please refer to the following pages for a sample of the label and location. IC: 4432A-IPAD20 QL9-IPAD100-20 : on back of EUT

Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 85 of 102 Appendix K: Internal Photographs Photograph 10: PCB in Front Chassis Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 86 of 102 Photograph 11: Inside of Rear Case Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 87 of 102 Photograph 12: PCB Front Side Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 88 of 102 #: 2006048 Page 88 of 102 Bluetooth WLAN Photograph 13: Back Side of PCB with WLAN PCB Attached Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 89 of 102 Photograph 14: Back Side of PCB with WLAN PCB Removed Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 90 of 102 Photograph 15: Front of WLAN Radio PCB with Shield Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 91 of 102 Photograph 16: Front of WLAN Radio PCB with Shield Removed Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 92 of 102 Photograph 17: Back of WLAN Radio PCB Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 93 of 102 Photograph 18: WLAN Antenna - Front Side Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 94 of 102 Photograph 19: WLAN Antenna - Back Side Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 95 of 102 Photograph 20: Front Case with PCB Removed Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 96 of 102 Photograph 21: LCD in Front Case Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 97 of 102 Photograph 22: Front of Keypad PCB Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 98 of 102 Photograph 23: Back of Keypad PCB Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 99 of 102 Photograph 24: Top of Bluetooth Antenna Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 100 of 102 Photograph 25: Bottom of Bluetooth Antenna Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 101 of 102 Photograph 26: Card Scanner Assembly Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 102 of 102 Photograph 27: Chassis Assembly with Bluetooth Antenna and Scanner

Company: Fujitsu Transaction Solutions, Inc. FCC ID: QL9-IPAD100-20 IC ID: 4432A-IPAD20 Model(s): iPAD100-20 DUT Type: Portable Wireless Transaction Terminal with 802.11b/g & Bluetooth 2006 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 1 of 34 Test Report Serial No.: 071306QL9-T763-S15W Test Report Issue Date: August 03, 2006 Date(s) of Evaluation: July 17-18, 2006 Test Report Revision No.: Revision 1.3 Description of Tests: RF Exposure SAR FCC 47 CFR §2.1093 IC RSS-102 Issue 2 RF EXPOSURE EVALUATION SPECIFIC ABSORPTION RATE S S S A A A R R R T T T E E E S S S T T T R R R E E E P P P O O O R R R T T T FOR FUJITSU TRANSACTION SOLUTIONS, INC. PORTABLE WIRELESS TRANSACTION TERMINAL WITH 802.11b/g WLAN & BLUETOOTH FCC ID: QL9-IPAD100-20 (OET BULLETIN 65 SUPPLEMENT C) IC: 4432A-IPAD20 (RSS-102 ISSUE 2) Test Report Serial No. 071306QL9-T763-S15W Test Report Revision(s) Test Lab Celltech Compliance Testing & Engineering Lab (Celltech Labs Inc.) 1955 Moss Court Kelowna, BC Canada V1Y 9L3 Test Report Prepared By: Cheri Frangiadakis Test Report Writer Celltech Labs Inc. Test Report Reviewed By: Jonathan Hughes General Manager Celltech Labs Inc. Model Number iPAD100-20 Revision 1.0Initial Release Revision 1.1 Model Number Revision 1.2 FCC & IC ID’s Revision 1.3 Response to TCB #3 Company: Fujitsu Transaction Solutions, Inc. FCC ID: QL9-IPAD100-20 IC ID: 4432A-IPAD20 Model(s): iPAD100-20 DUT Type: Portable Wireless Transaction Terminal with 802.11b/g & Bluetooth 2006 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 2 of 34 Test Report Serial No.: 071306QL9-T763-S15W Test Report Issue Date: August 03, 2006 Date(s) of Evaluation: July 17-18, 2006 Test Report Revision No.: Revision 1.3 Description of Tests: RF Exposure SAR FCC 47 CFR §2.1093 IC RSS-102 Issue 2 Celltech Labs Inc. declares under its sole responsibility that this wireless portable device has demonstrated compliance with the Specific Absorption Rate (SAR) RF exposure requirements specified in FCC 47 CFR §2.1093 and Health Canada’s Safety Code 6. The device was tested in accordance with the measurement standards and procedures specified in FCC OET Bulletin 65, Supplement C (Edition 01-01) and Industry Canada RSS-102 Issue 2 for the General Population / Uncontrolled Exposure environment. All measurements were performed in accordance with the SAR system manufacturer recommendations. I attest to the accuracy of data. All measurements were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. This test report shall not be reproduced partially, or in full, without the prior written approval of Celltech Labs Inc. The results and statements contained in this report pertain only to the device(s) evaluated. DECLARATION OF COMPLIANCE SAR RF EXPOSURE EVALUATION Test Location CELLTECH LABS INC. Testing and Engineering Services 1955 Moss Court Kelowna, B.C. Canada V1Y 9L3 Phone: 250 - 448-7047 Fax: 250 - 448-7046 e-mail: [email protected] web site: www.celltechlabs.com Company Information FUJITSU TRANSACTION SOLUTIONS, INC. 10180 Barnes Canyon Road San Diego, California 92121 United States FCC IDENTIFIER: QL9-IPAD100-20 IC IDENTIFIER: 4432A-IPAD20 Model Number: iPAD100-20 Test Requirement(s): FCC 47 CFR §2.1093; Health Canada Safety Code 6 Test Procedure(s): FCC OET Bulletin 65, Supplement C (Edition 01-01) Industry Canada RSS-102 Issue 2 Device Classification: Digital Transmission System (DTS) Device Description: Portable Wireless Transaction Terminal Internal Transmitter(s): 802.11b/g WLAN & Bluetooth Modulation Type(s): Direct Sequence Spread Spectrum (DSSS) - 802.11b Orthogonal Frequency Division Multiplexing (OFDM) - 802.11g Frequency Hopping Spread Spectrum (FHSS) - Bluetooth Transmit Frequency Range(s): 2412 - 2462 MHz (802.11b/g WLAN) 2402 - 2480 MHz (Bluetooth) Max. RF Conducted Power Tested: 19.5 dBm (89.1 mW) Peak - 802.11b, 1 Mbps (2437 MHz) Battery Type(s) Tested: Lithium-ion 3.7 V 1700 mAh (P/N: CA50601-1000) Antenna Type(s) Tested: WLAN: Internal / Bluetooth: Internal Body-Worn Accessories Tested: Plastic Swivel Belt-Clip with Metal Spring (P/N: R5566FTXS) Audio Accessories Tested: Generic Ear-Microphone Max. SAR Level(s) Measured: Body-worn: 0.016 W/kg (Peak SAR measured from Area Scan) Test Report Approved By: Sean Johnston Compliance Technologist Celltech Labs Inc. Company: Fujitsu Transaction Solutions, Inc. FCC ID: QL9-IPAD100-20 IC ID: 4432A-IPAD20 Model(s): iPAD100-20 DUT Type: Portable Wireless Transaction Terminal with 802.11b/g & Bluetooth 2006 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 3 of 34 Test Report Serial No.: 071306QL9-T763-S15W Test Report Issue Date: August 03, 2006 Date(s) of Evaluation: July 17-18, 2006 Test Report Revision No.: Revision 1.3 Description of Tests: RF Exposure SAR FCC 47 CFR §2.1093 IC RSS-102 Issue 2 TABLE OF CONTENTS 1.0 INTRODUCTION ___________________________________________________________________4 2.0 DESCRIPTION of DEVICE UNDER TEST (DUT) __________________________________________4 3.0 SAR MEASUREMENT SYSTEM_______________________________________________________5 4.0 MEASUREMENT SUMMARY _________________________________________________________6 5.0 DETAILS OF SAR EVALUATION______________________________________________________7 6.0 EVALUATION PROCEDURES________________________________________________________7 7.0 SYSTEM PERFORMANCE CHECK____________________________________________________8 8.0 SIMULATED EQUIVALENT TISSUES __________________________________________________9 9.0 SAR SAFETY LIMITS ___________________________________…

Text truncated - open the document above for the full version.

Engineering and Testing for EMC and Safety Compliance 360 Herndon Parkway, Suite 1400 Herndon, VA 20170 Tel: 703-689-0368 Fax: 703-689-2056 Certification Application Report FCC Part 15.247 & Industry Canada RSS-210 Test Lab: Rhein Tech Laboratories, Inc. Phone: 703-689-0368 360 Herndon Parkway Fax: 703-689-2056 Suite 1400 Web: www.rheintech.com Herndon, VA 20170 E-Mail: [email protected] Applicant: Fujitsu Transaction Solutions Inc. Phone: (858) 731-4719 10180 Barnes Canyon Road Fax: (858) 731-4780 San Diego, CA. 92121 Contact: Dwayne Andrejczuk E-Mail: [email protected] FCC ID/ IC ID: QL9-IPAD100-20/ 4432A-IPAD20 Test Report Date: July 9, 2006 Platform: N/A RTL Work Order #: 2006048 Model Name/Model #: iPAD/iPAD100-20 RTL Quote #: QRTL06-209C American National Standard Institute: ANSI C63.4-2003: Methods of Measurement of Radio-Noise Emissions from Low- Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz FCC Classification: DTS – Part 15 Digital Transmission System (WLAN portion) DSS – Part 15 Spread Spectrum Transmitter (Bluetooth portion) FCC Rule Part(s): FCC Rules Part 15.247 (10-01-05): Operation within the bands 920-928 MHz, 2400- 2483.5 MHz and 5725-5850 MHz Direct Sequence System Approved Test Methods: DA000705 Bluetooth Devices KDB558074 DTS for WLAN Devices Industry Canada: RSS-210: Low Power License-Exempt Communications Devices Digital Interface Information Digital Interface was found to be compliant Frequency Range (MHz) Output Power (W) Emission Designator 2412-2462 0.089 15M5G7D 2412-2462 0.074 19M9G7D 2402-2480 0.002 1M12FXD I, the undersigned, hereby declare that the equipment tested and referenced in this report conforms to the identified standard(s) as described in this test report. No modifications were made to the equipment during testing in order to achieve compliance with these standards. Furthermore, there was no deviation from, additions to, or exclusions from, the applicable parts of FCC Part 2, FCC Part 15, FCC 97-114, ANSI C63.4, and Industry Canada RSS-210. Signature: Date: July 9, 2006 Typed/Printed Name: Desmond A. Fraser Position: President This report may not be reproduced, except in full, without the written approval of Rhein Tech Laboratories, Inc. The test results relate only to the item(s) tested. Rhein Tech Laboratories, Inc. Client: Fujitsu Transaction Solutions Inc. 360 Herndon Parkway Model #: iPAD100-20 Suite 1400 Standards: FCC 15.247 & RSS-210 FCC/IC ID: QL9-IPAD100-20/4432A-IPAD20 Herndon, VA 20170 http://www.rheintech.com Report #: 2006048 Page 2 of 102 Table of Contents 1 General Information...............................................................................................................................................6 1.1 Scope...........................................................................................................................................................6 1.2 Description of EUT........................................................................................................................................6 1.3 Test Facility..................................................................................................................................................6 1.4 Related Submittal(s)/Grant(s).......................................................................................................................6 1.5 Modifications.................................................................................................................................................6 2 Test Information.....................................................................................................................................................7 2.1 Description of Test Modes............................................................................................................................7 2.2 Exercising the EUT.......................................................................................................................................7 2.3 Test Result Summary...................................................................................................................................8 2.4 Test System Details......................................................................................................................................9 2.5 Configuration of Tested System.................................................................................................................10 3 Peak Output Power - §15.247(b)(1); RSS…

Text truncated - open the document above for the full version.