QW2SAVIA2003001Compact Fluoresent Lamp

User’s Manual (AF15W,AF20W,AF25W) This light device has been tested and found to comply with the limits for Consumer RF Lighting Device,pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, many cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. 1 Use only on 120V/60Hz. 2 Never disassemble or modity-any changes could void the user’s authority to operate this device. 3 Not for use in totally enolosed recessed fixtures. 4 Risk of electric shock-do not use with where directly exposed to water. 5 This device is not intended for use with emergency exit fixtures or emergency exit lights. 6 This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or commumication equipment operating between 0.45-30MHz. 7 To prevent burns, do not touch the bulb during operation or immediately after swithing off. 8 Not for use with dimmers, electronic timer or photocell devices or occupancy sensor. 9, If device is malfunction such as excessive audible noise or excessive radio interference with nearby equipment, turn off and replaces the device. In some cases, moving lamp to another location may reduce or eliminate Radio Interference. 10 This product does not contain user maintenance parts. Savia Electronics (Suzhou)Co.,Ltd.

APPENDIX C - EUT PHOTOGRAPHS EUT – AF15W Front View EUT – AF15W Port View EUT – AF20W Front View EUT – AF20W Port View EUT – AF25W Front View EUT – AF25W Port View

APPENDIX A - FCC PRODUCT LABELING AND WARNING STATEMENT Proposed FCC Label Format FCC ID: QW2Savia2003001 Specifications: Text is Black or white in color and is left justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Proposed Label Location on EUT Proposed FCC Label Location ` AF15W AF20W AF25W FCC Warning Statement This device complies with Part 18 of FCC rules. Information on the following matters shall be provided to the user in the instruction manual or on the packaging if an instruction manual is not provided for any type of any ISM equipment: a. The interference potential of the device or system b. Maintenance of the system c. Simple measures that can be taken by the user to correct interference. EUT: Front View

APPENDIX C - EUT PHOTOGRAPHS EUT – AF15W Component View EUT – AF15W Solder View EUT – AF20W Component View EUT – AF20W Solder View EUT – AF25W Component View EUT – AF25W Solder View

Note: The test report is specially limited to the use of the above client company and the product model. It may not be duplicated without prior written consent of Bay Area Compliance Laboratory Corporation. This report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government FCC ID PER PART 18 MEASUREMENT AND TEST REPORT FOR Savia Electronics (Suzhou) Co. Ltd. Xinpu Road, Sheng pu, Suxhou Industrial Park FCC ID: QW2Savia2003001 February 23, 2003 This Report Concerns: Original Report Equipment Type: Compact Fluorescent Lamps Lighting Devices Test Engineer: Low Eng Heng Report Number: R0302131 Test Date: February 13, 2003 Reviewed By: Hans Mellberg Prepared By: Bay Area Compliance Laboratory Corporation 230 Commercial Street Sunnyvale, CA 94085 Tel: (408) 732-9162 Fax: (408) 732-9164 Savia Electronics (Suzhou) Co. Ltd. FCC ID: QW2Savia2003001 Report # R0302131 Page 2 of 11 FCC Part 18 Test Report TABLE OF CONTENTS 1 - GENERAL INFORMATION.................................................................................................................................................3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)........................................................................................3 1.2 OBJECTIVE................................................................................................................................................................................3 1.3 RELATED SUBMITTAL(S)/GRANT(S).....................................................................................................................................3 1.4 TEST METHODOLOGY..............................................................................................................................................................3 1.5 TEST FACILITY.........................................................................................................................................................................3 1.6 TEST EQUIPMENT LIST AND DETAILS...................................................................................................................................4 1.7 EQUIPMENT UNDER TEST (EUT) GENERAL DESCRIPTION................................................................................................4 1.8 LOCAL SUPPORT EQUIPMENT.................................................................................................................................................4 1.9 INTERFACE PORTS AND CABLING..........................................................................................................................................4 2 - SYSTEM TEST CONFIGURATION..................................................................................................................................5 2.1 JUSTIFICATION..........................................................................................................................................................................5 2.2 EUT EXERCISE PROGRAM......................................................................................................................................................5 2.3 SCHEMATICS/BLOCK DIAGRAM.............................................................................................................................................5 2.4 EQUIPMENT MODIFICATIONS.................................................................................................................................................5 2.5 CONFIGURATION OF TEST SYSTEM.......................................................................................................................................6 2.6 TEST SETUP BLOCK DIAGRAM...............................................................................................................................................6 3 - CONDUCTED EMISSIONS TEST DATA........................................................................................................................7 3.1 MEASUREMENT UNCERTAINTY.............................................................................................................................................7 3.2 EUT SETUP...............................................................................................................................................................................7 3.3 EMI RECEIVER SETUP............................................................................................................................................................7 3.4 TEST PROCEDURE....................................................................................................................................................................7 3.5 SUMMARY OF TEST RESULTS.................................................................................................................................................8 3.6 CONDUCTED EMISSIONS TEST DATA....................................................................................................................................8 Savia Electronics (Suzhou) Co. Ltd. FCC ID: QW2Savia2003001 Report # R0302131 Page 3 of 11 FCC Part 18 Test Report 1 - GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) The Savia Electronics (Suzhou) Co. Ltd., Model: AF15W; AF20W; AF25W or the "EUT" as referred to in this report is a Compact Fluorescent Lamps Lighting Devices . The EUT (AF15W) measures 2.25”L x 2.25”W x 5.00”H, the EUT (AF20W) measures 2.25”L x 2.25”W x 5.25”H, and the EUT (AF25W) measures 2.25”L x 2.25”W x 5.75”H. Note: The test data collected are from a representative production sample provided by the manufacturer. 1.2 Objective This Following test report is prepared on behalf of Savia Electronics (Suzhou) Co. Ltd. in accordance with Part 2, Subpart J, and Part 18, Subparts A and B of the Federal Communication Commissions rules. The objective of the manufacturer is to demonstrate comp…

Text truncated - open the document above for the full version.

APPENDIX B - TEST SETUP PHOTOGRAPHS AF15W- Conducted Emission Front View 1 AF15W- Conducted Emission Front View 2 AF15W- Conducted Emission Rear View AF20W- Conducted Emission Front View 1 AF20W- Conducted Emission Front View 2 AF20W- Conducted Emission Rear View AF25W- Conducted Emission Front View 1 AF25W- Conducted Emission Front View 2 AF25W- Conducted Emission Rear View