QXATC49MHZFBR12" RADIO CONTROLLED VEHICLE FULL FUNCTIONED

Operation Description for 12î Vehicle (49MHz) Full Functioned The transmitter of the 12î Vehicle (49MHz) Full Functioned is powered by one 9V battery. The radio frequency channel is 49.860MHz. There are 2 control sticks. When the push button is pushed to ìONî on the bottom of the vehicle (receiver) and the control sticks are pressed, it will transmit different radio control signals. The receiver (the vehicle) of the 12î Vehicle (49MHz) is powered by one of 7.2V charge batteries. The radio frequency channel is 49.860 MHz. There are two motors on the receiver. When it receives the radio control signals, it will move to the corresponding direction. Referring to the transmitter circuit design, the circuit description is listed below: - D1 and associated components act as a voltage regulator. - IC1 and associated components act as an indictor circuit. - Q2, Y1 and associated components act an oscillator. - Q1, L2 and associated components act an encoder. Referring to the receiver circuit design, the circuit description is listed below: - Q1 and associated components act as a receiver. - D1 and associated components act as a voltage regulator. - IC1 and associated components act as decoder. - Q4 ~ Q9 and associated components act a motor driver for >M. - Q2, Q3, Q10 ~ Q13 and associated components act a motor driver for M<.

TEST REPORT Report No. : AJ008847-001 Date : 2007 May 02 Page 1 of 11 FCC ID: QXATC49MHZFBR This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com Application No. : LJ208624(0) Applicant : Toy Century Industrial Co., Ltd Room 15, 21/F, Tower North, 1 Science Museum Road, Tsim Sha Tsui East, Kowloon, Hong Kong Sample Description : One(1) submitted sample(s) stated to be 12î Radio Controlled Vehicle Full Functioned of Model No. 89957, 89967, 89968, 6830, 6831, 6832, 6833, 6834, 6835, 6836, 6837, 6838, 6839, 6840, 6841, 6842, 6843, 6844, 6845, 6846, 6847, 6848, 6849, 19563, 19564, 19565, 19566, 19567, 19568, 19569, 19570, 19571, 19572, 19573, 19574, 19575, 19576, 19577, 19578, 19579, 19580, 19581, 19583, 89500, 89501, 89502, 89503, 89504, 89505, 89506, 89507, 89508, 89509, 89510, 89511, 89512, 89513, 89514, 89515, 89516, 89517, 89518, 89519, 89520 Radio Frequency : 49.860 MHz Transmitter Rating : 1 x 7.2V rechargeable battery No. of submitted sample : Three(3) piece(s) *** Date Received : 2007 April 13 Test Period : 2007 April 16 ñ 2007 April 23 Test Requested : FCC Part 15 Certification. Test Method : 47 CFR Part 15 (10-1-05 Edition) ANSI C63.4 ñ 2003 Test Result : See attached sheet(s) from page 2 to 11. Conclusion : The submitted sample was found to comply with requirement of FCC Part 15 Subpart B. For and on behalf of CMA Industrial Development Foundation Limited Authorized Signature : ____________________________________________________ Danny Chui Deputy Manager - EL. Division TEST REPORT Report No. : AJ008847-001 Date : 2007 May 02 Page 2 of 11 FCC ID: QXATC49MHZFBR This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com Table of Contents 1 General Information .............................................................................................................................3 1.1 General Description .....................................................................................................................3 1.2 Location of the test site ................................................................................................................4 1.3 List of measuring equipment........................................................................................................5 2 Description of the radiated emission test .............................................................................................6 2.1 Test Procedure..............................................................................................................................6 2.2 Test Result....................................................................................................................................6 2.3 Radiated Emission Measurement Data ........................................................................................7 3 Description of the Line-conducted Test...............................................................................................8 3.1 Test Procedure..............................................................................................................................8 3.2 Test Result....................................................................................................................................8 3.3 Graph and Table of Conducted Emission Measurement Data .....................................................8 4 Photograph ...........................................................................................................................................9 4.1 Photographs of the Test Setup for Radiated Emission and Conduction Emission ......................9 4.2 Photographs of the External and Internal Configurations of the EUT.........................................9 5 Supplementary document ...................................................................................................................10 5.1 Bandwidth ..................................................................................................................................10 5.2 Duty cycle ..................................................................................................................................10 5.3 Transmission time ......................................................................................................................10 6 Appendices .........................................................................................................................................11 TEST REPORT Report No. : AJ008847-001 Date : 2007 May 02 Page 3 of 11 FCC ID: QXATC49MHZFBR This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com 1 General Information 1.1 General Description The equipment under test (EUT) is a receiver for 12î Radio Controlled Vehicle Full Functioned. It operates at 49.860MHz and the oscillation of radio control is generated by a LRC circuit. The EUT is power by a 7.2V rechargeable battery. When received a forward, backward, turn left or turn right signal, it will go to corresponding direction. The brief circuit description is listed as follows: - Q1 and associated circuit act as a RF amplifier. - IC1 and associated circuit act as a decoder. - D1 and associated circuit act as a voltage regulator…

Text truncated - open the document above for the full version.

TEST REPORT Report No. : AJ008847-001 Date : 2007 May 10 Page 1 of 11 FCC ID: QXATC49MHZFBR This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com Application No. : LJ208624(0) Applicant : Toy Century Industrial Co., Ltd Room 15, 21/F., North Tower, Concordia Plaza, 1 Science Museum Road, Tsim Sha Tsui East, Kowloon, Hong Kong Sample Description : One(1) submitted sample(s) stated to be 12î Radio Controlled Vehicle Full Functioned of Model No. 89957, 89967, 89968, 6830, 6831, 6832, 6833, 6834, 6835, 6836, 6837, 6838, 6839, 6840, 6841, 6842, 6843, 6844, 6845, 6846, 6847, 6848, 6849, 19563, 19564, 19565, 19566, 19567, 19568, 19569, 19570, 19571, 19572, 19573, 19574, 19575, 19576, 19577, 19578, 19579, 19580, 19581, 19583, 89500, 89501, 89502, 89503, 89504, 89505, 89506, 89507, 89508, 89509, 89510, 89511, 89512, 89513, 89514, 89515, 89516, 89517, 89518, 89519, 89520 Radio Frequency : 49.860 MHz Receiver Rating : 1 x 7.2V rechargeable battery No. of submitted sample : Three(3) piece(s) *** Date Received : 2007 April 13 Test Period : 2007 April 16 ñ 2007 April 23 Test Requested : FCC Part 15 Certification. Test Method : 47 CFR Part 15 (10-1-05 Edition) ANSI C63.4 ñ 2003 Test Result : See attached sheet(s) from page 2 to 11. Conclusion : The submitted sample was found to comply with requirement of FCC Part 15 Subpart B. For and on behalf of CMA Industrial Development Foundation Limited Authorized Signature : ____________________________________________________ Danny Chui Deputy Manager - EL. Division TEST REPORT Report No. : AJ008847-001 Date : 2007 May 10 Page 2 of 11 FCC ID: QXATC49MHZFBR This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com Table of Contents 1 General Information .............................................................................................................................3 1.1 General Description .....................................................................................................................3 1.2 Location of the test site ................................................................................................................4 1.3 List of measuring equipment........................................................................................................5 2 Description of the radiated emission test .............................................................................................6 2.1 Test Procedure..............................................................................................................................6 2.2 Test Result....................................................................................................................................6 2.3 Radiated Emission Measurement Data ........................................................................................7 3 Description of the Line-conducted Test...............................................................................................8 3.1 Test Procedure..............................................................................................................................8 3.2 Test Result....................................................................................................................................8 3.3 Graph and Table of Conducted Emission Measurement Data .....................................................8 4 Photograph ...........................................................................................................................................9 4.1 Photographs of the Test Setup for Radiated Emission and Conduction Emission ......................9 4.2 Photographs of the External and Internal Configurations of the EUT.........................................9 5 Supplementary document ...................................................................................................................10 5.1 Bandwidth ..................................................................................................................................10 5.2 Duty cycle ..................................................................................................................................10 5.3 Transmission time ......................................................................................................................10 6 Appendices .........................................................................................................................................11 TEST REPORT Report No. : AJ008847-001 Date : 2007 May 10 Page 3 of 11 FCC ID: QXATC49MHZFBR This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com 1 General Information 1.1 General Description The equipment under test (EUT) is a receiver for 12î Radio Controlled Vehicle Full Functioned. It operates at 49.860MHz and the oscillation of radio control is generated by a LRC circuit. The EUT is power by a 7.2V rechargeable battery. When received a forward, backward, turn left or turn right signal, it will go to corresponding direction. The brief circuit description is listed as follows: - Q1 and associated circuit act as a RF amplifier. - IC1 and associated circuit act as a decoder. - D1 and associated circuit act as a vo…

Text truncated - open the document above for the full version.