QXO-AP3020WAccess Point

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 31, 2026 Ref: Covered listed Attestation Part 2.911(d)(7) Filing Grantee Code: QXO FRN: 0019588359 Extreme Networks, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. The applicant as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC Grantee Code. The service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. The applicant acknowledges that they will maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the following agent information changes. Designated U.S. Agent Information: FRN: 0019588359 Company Name: Extreme Networks, Inc. Address: 2121 RDU Center Drive, Morrisville, North Carolina 27560, United States Contact Person: John Ballew, Senior Regulatory Compliance Manager Tel.: +1-603-952-5862 Email: [email protected] Sincerely, Applicant Extreme Networks, Inc. John Ballew, Senior Regulatory Compliance Manager Signature:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 31, 2026 FCC ID: QXO-AP3020W RE: Covered listed Attestation Part 2.911(d)(5)(i) Filing Extreme Networks, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Extreme Networks, Inc. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. Or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. RE: Attestation Statements Part 2.911(d)(5)(ii) Filing Extreme Networks, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Applicant : Extreme Networks, Inc. Address : 2121 RDU Center Drive, Morrisville, North Carolina 27560, United States Signature : _________________________________ Name and Job Title : John Ballew, Senior Regulatory Compliance Manager E-mail : [email protected] Tel. : +1-603-952-5862

Date: March 31, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Declaration of Professional Installation FCC ID: QXO-AP3020W Product Name: Access Point To whom it may concern: We, the undersigned, hereby declares that the device will be distributed through a controlled distribution channels. Output power settings are provided to professional installers to ensure regulatory compliance, offering only power reduction capabilities. This device is not intended for sale to the general public. Professional training and support is provided as part of the Authorized Partner programs. Sincerely, Applicant : Extreme Networks, Inc. Address : 2121 RDU Center Drive, Morrisville, North Carolina 27560, United States Signature : _________________________________ Name and Job Title : John Ballew, Senior Regulatory Compliance Manager E-mail : [email protected] Tel. : +1-603-952-5862

Agent Authorization Letter Date: March 31, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: QXO-AP3020W Product Name: Access Point To whom it may concern: We, the undersigned, hereby authorize the following person to act as our agent in the preparation and submission of an application for equipment authorization in accordance with the FCC Rules and Regulations. Sporton International Inc. Address : No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) Name : Leo Huang Job Title : VP e-mail : [email protected] We further certify that neither the applicant nor any party to this application, as defined in 47 CFR § 1.2002(b), is subject to a denial of Federal benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862. This authorization also includes the authority to complete FCC Form 731 on our behalf and to sign the application as an authorized agent. Applicant : Extreme Networks, Inc. Address : 2121 RDU Center Drive, Morrisville, North Carolina 27560, United States Signature : _________________________________ Name and Job Title : John Ballew, Senior Regulatory Compliance Manager E-mail : [email protected] Tel. : +1-603-952-5862

Request for Confidentiality Date: March 31, 2026 Federal Communications Commission Authorization and Evaluation Division Subject: Request for confidentiality FCC ID: QXO-AP3020W To whom it may concern: Short-term Confidentiality pursuant to Public Notice DA 04-1705, and in order to comply with the marketing regulations in 47 C.F.R. §2.803 and the importation rules in 47 C.F.R. §2.1204 while ensuring that business-sensitive information remains confidential until the actual marketing of newly authorized devices, we are request the Commission grant temporary confidential treatment and not release the following attachments for routine public disclosure until 180 days after the grant date. 1.Internal Photographs 2.External Photographs 3.User’s manual 4.Test Set up photos 5.Geolocation General Description Permanent Confidentiality Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. 1.Block Diagram 2.Schematics Diagram 3.Operational Description / Software Security For U-NII Devices 4.PIA Acceptance Letter / PIA Inquiry Submission 5.Geolocation Justification Report It is our understanding that test measurement reports and correspondence during the certification review process cannot be granted confidential treatment, and such information will be available for public review once the grant of equipment authorization is issued. Sincerely, Applicant : Extreme Networks, Inc. Address : 2121 RDU Center Drive, Morrisville, North Carolina 27560, United States Signature : _________________________________ Name and Job Title : John Ballew, Senior Regulatory Compliance Manager E-mail : [email protected]

4L.R7PBE.005 LABEL,PRODUCT LABEL,AP3020W, 91.4X37.4MM,PET,R7PB-E6 1.7 R7.3 16.4 91.4 37.4 R0.5 C3 *① *② *③ *④ *⑤ ⑥ ⑦ ⑧ ⑨ TEST ITEMTEST SPECTEST CONDITIONCRITERIA 1 附著力測試 ISO Class.: 1 ASTM Class.: 4 B ASTM D3359-02/ ISO 2409:2007 Detach ment of small flake s of the co ating at the interse ct ions of the cu ts. A cr oss-cu t area not si gnifica ntly greater than 5% is affect ed. ADHESION TEST NOTES: 1. MATERIAL: WHITE MATTE PET, T=0.05mm ADHESIVE: MESH ADHESIVE, T=0.03mm, OR EQUIVALENT AS APPROVED BY WNC. 2. FINISH: MATTE COATING , T=0.02mm, ONLINE PRINT, OR EQUIVALENT AS APPROVED BY WNC. 3. COLOR: a) BACKGROUND= PET COLOR (WHITE) b)PRINTING:BLACK ,CUTTING DIE: 4. TEMPERATURE RESISTANT= 120°C. 5. PASTED OBJECT MATERIAL : ALUMINUM & PLASTIC 6. UL APPROVED : INDOOR,PGJI2,CM-100T-030 7. MUST BE USED WITH RICOH "B110A" OR "B110CR" THERMAL TRANSFER RIBBONS. 8. LABEL FEED: ROLL-FED,LINER SPACING: LEFT/RIGHT MARGIN ON RELEASE LINER: 3 ± 0.5 mm TOP/BOTTOM MARGIN ON RELEASE LINER: 3 ± 0.3 mm 9. PRINTING TOLERANCE: <30mm ~120mm for ±0.3mm 10.TEST REQUIREMENTS OR OTHER EQUIVALENT TEST METHOD RELEASE SANDY CHEN WNC CONFIDENTIAL 2 CATHY CHEN CATHY CHEN SANDY CHEN A03/27/26 A 03/27/26 03/27/26 03/27/26 FOR REFERENCE ONLY. PLEASE REFER TO THE LABEL FORM FOR THE PRINTING CONTENT. DEFAULT FONT: GOTHAM. 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Tel: 886-3-6667799 Fax: 886-3-5788726 XXX-XXXXXX DA106976 1.1A 3A XXXXX-XX-XXXXX. XXXXXXX XXXXXXXXXX MODEL(型號/型号):AP3020W AP3020W CAN ICES(B)/NMB(B) Indoor Use only AP3020W AP3020W 4L.R7PBE.005 電波法により5GHz,6GHz, 帯は屋内使用に限ります。 TA XXXX-YYYY APPROVED XXXXXXXXXXXXXX D3E700 RoHS 2.4 ± 0.5 1.9 ± 0.5 Back of the device for AP3020W

Radio Exposure Evaluation Report Report No. : FA611201-01 TEL : 886-3-327-3456 Page Number : 1 of 17 FAX : 886-3-327-0973 Issued Date : Jun. 08, 2026 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: QXO-AP3020W Radio Exposure Evaluation Report FCC ID : QXO-AP3020W Equipment : Access Point Brand Name : Extreme Networks Model Name : AP3020W Applicant : Extreme Networks, Inc. 2121 RDU Center Drive Morrisville North Carolina United States 27560 Manufacturer : Extreme Networks, Inc. 2121 RDU Center Drive Morrisville North Carolina United States 27560 Standard : 47 CFR FCC Part 2 Subpart J, section 2.1091 The product was received on Jan. 16, 2026, and testing was started from Feb. 04, 2026 and completed on Apr. 28, 2026. We, SPORTON INTERNATIONAL INC. Hsinhua Laboratory, would like to declare that the tested sample has been evaluated in accordance with the procedures given in 47 CFR FCC Part 2 Subpart J, section 2.1091 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Hsinhua Laboratory, the test report shall not be reproduced except in full. ___________________________________________ Approved by: Jackson Tsai __________________________________________ SDoC by: XXXXX SPORTON INTERNATIONAL INC. Hsinhua Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333411, Taiwan (R.O.C.) Radio Exposure Evaluation Report Report No. : FA611201-01 TEL : 886-3-327-3456 Page Number : 2 of 17 FAX : 886-3-327-0973 Issued Date : Jun. 08, 2026 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: QXO-AP3020W Table of Contents HISTORY OF THIS TEST REPORT .................................................................................................................. 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information .............................................................................................................................................. 5 1.2 Applicable Standards ............................................................................................................................. 8 1.3 Testing Location ..................................................................................................................................... 8 2 MAXIMUM PERMISSIBLE EXPOSURE ............................................................................................... 9 2.1 Limit of Maximum Permissible Exposure ............................................................................................... 9 2.2 RF Exposure Exempt Measurement .................................................................................................... 10 2.3 Multiple RF Sources Exposure ............................................................................................................. 11 2.4 MPE Calculation Method ...................................................................................................................... 12 2.5 Calculated Result and Limit .................................................................................................................. 13 Photographs of EUT V01 Radio Exposure Evaluation Report Report No. : FA611201-01 TEL : 886-3-327-3456 Page Number : 3 of 17 FAX : 886-3-327-0973 Issued Date : Jun. 08, 2026 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: QXO-AP3020W History of this test report Report No. Version Description Issued Date FA611201-01 01 Initial issue of report Jun. 08, 2026 Radio Exposure Evaluation Report Report No. : FA611201-01 TEL : 886-3-327-3456 Page Number : 4 of 17 FAX : 886-3-327-0973 Issued Date : Jun. 08, 2026 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: QXO-AP3020W Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 2 - Exposure evaluation PASS - Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: None Reviewed by: Ryan Hsiao Report Producer: Debby Hung Radio Exposure Evaluation Report Report No. : FA611201-01 TEL : 886-3-327-3456 Page Number : 5 of 17 FAX : 886-3-327-0973 Issued Date : Jun. 08, 2026 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: QXO-AP3020W 1 General Description 1.1 Information 1.1.1 EUT General Information RF General Information Evaluation Mode Frequency Range (MHz) Operating Frequency (MHz) Modulation Type 2.4GHz WLAN 2400-2483.5 2412-2462 802.11b: DSSS (DBPSK, DQPSK, CCK) 802.11g/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) VHT: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM) 802.11ax: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM) 802.11be: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM, 4096QAM) 5GHz WLAN 5150-5250 5250-5350 5470-5725 5725-5850 5180-5240 5260-5320 5500-5720 5745-5825 802.11a/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) 802.11ac: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM) 802.11ax: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM) 802.11be: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM, 4096QAM) 6GHz WLAN (6ID) 5925-7125 5955-7115 802.11ax: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM) 802.11be: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM, 4096QAM) 6GHz WLAN (6SD) 5925-6425 6525-6875 5955-6415 6535-6855 802.11ax: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM) 802.11be: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM, 4096QAM) Bluetooth 2400-2483.5 2402-2480 LE: DSSS (GFSK) Radio Exposure Evaluation Report Report No. : FA611201-01 TEL : 886-3-327-3456 Page Number : 6 of 17 FAX : 886-3-327-0973 Issued Date : Jun. 08, 2026 Re…

Text truncated - open the document above for the full version.

FCC Radio Test Report Report No. : FR611201-01AC TEL : 886-3-3273456 Page Number : 1 of 28 FAX : 886-3-3270973 Issued Date : Jun. 08, 2026 Report Template No.: HE1-C8 Ver4.5 Report Version : 01 FCC ID: QXO-AP3020W FCC Radio Test Report FCC ID : QXO-AP3020W Equipment : Access Point Brand Name : Extreme Networks Model Name : AP3020W Applicant : Extreme Networks, Inc. 2121 RDU Center Drive Morrisville North Carolina United States 27560 Manufacturer : Extreme Networks, Inc. 2121 RDU Center Drive Morrisville North Carolina United States 27560 Standard : 47 CFR FCC Part 15.247 The product was received on Jan. 16, 2026, and testing was started from Feb. 04, 2026 and completed on Apr. 28, 2026. We, SPORTON INTERNATIONAL INC. Hsinhua Laboratory, would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.10-2020 + Cor.1-2023 + C63.10a-2024 + Errata to C63.10a-2024 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Hsinhua Laboratory, the test report shall not be reproduced except in full. ___________________________________________ Approved by: Jackson Tsai SPORTON INTERNATIONAL INC. Hsinhua Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333411, Taiwan (R.O.C.) FCC Radio Test Report Report No. : FR611201-01AC TEL : 886-3-3273456 Page Number : 2 of 28 FAX : 886-3-3270973 Issued Date : Jun. 08, 2026 Report Template No.: HE1-C8 Ver4.5 Report Version : 01 FCC ID: QXO-AP3020W Table of Contents HISTORY OF THIS TEST REPORT .................................................................................................................. 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information .............................................................................................................................................. 5 1.2 Testing Applied Standards ..................................................................................................................... 9 1.3 Testing Location Information .................................................................................................................. 9 1.4 Measurement Uncertainty ...................................................................................................................... 9 2 TEST CONFIGURATION OF EUT......................................................................................................... 9 2.1 Test Channel Mode .............................................................................................................................. 10 2.2 The Worst Case Measurement Configuration ...................................................................................... 12 2.3 Accessories .......................................................................................................................................... 13 2.4 Support Equipment ............................................................................................................................... 13 2.5 Test Setup Diagram ............................................................................................................................. 14 3 TRANSMITTER TEST RESULT .......................................................................................................... 16 3.1 AC Power-line Conducted Emissions .................................................................................................. 16 3.2 DTS Bandwidth..................................................................................................................................... 18 3.3 Maximum Conducted Output Power .................................................................................................... 19 3.4 Power Spectral Density ........................................................................................................................ 21 3.5 Emissions in Non-restricted Frequency Bands .................................................................................... 22 3.6 Emissions in Restricted Frequency Bands ........................................................................................... 23 4 TEST EQUIPMENT AND CALIBRATION DATA ................................................................................ 27 APPENDIX A. TEST RESULTS OF AC POWER-LINE CONDUCTED EMISSIONS APPENDIX B. TEST RESULTS OF DTS BANDWIDTH APPENDIX C. TEST RESULTS OF MAXIMUM CONDUCTED OUTPUT POWER APPENDIX D. TEST RESULTS OF POWER SPECTRAL DENSITY APPENDIX E. TEST RESULTS OF EMISSIONS IN NON-RESTRICTED FREQUENCY BANDS APPENDIX F. TEST RESULTS OF EMISSIONS IN RESTRICTED FREQUENCY BANDS APPENDIX G. TEST RESULTS OF RADIATED EMISSION CO-LOCATION APPENDIX H. TEST PHOTOS PHOTOGRAPHS OF EUT V01 FCC Radio Test Report Report No. : FR611201-01AC TEL : 886-3-3273456 Page Number : 3 of 28 FAX : 886-3-3270973 Issued Date : Jun. 08, 2026 Report Template No.: HE1-C8 Ver4.5 Report Version : 01 FCC ID: QXO-AP3020W History of this test report Report No. Version Description Issued Date FR611201-01AC 01 Initial issue of report Jun. 08, 2026 FCC Radio Test Report Report No. : FR611201-01AC TEL : 886-3-3273456 Page Number : 4 of 28 FAX : 886-3-3270973 Issued Date : Jun. 08, 2026 Report Template No.: HE1-C8 Ver4.5 Report Version : 01 FCC ID: QXO-AP3020W Summary of Test Result Report Clause Ref. Std. Clause Test Items Result (PASS/FAIL) Remark 1.1.2 15.203 Antenna Requirement PASS - 3.1 15.207 AC Power-line Conducted Emissions PASS - 3.2 15.247(a) DTS Bandwidth PASS - 3.3 15.247(b) Maximum Conducted Output Power PASS - 3.4 15.247(e) Power Spectral Density PASS - 3.5 15.24…

Text truncated - open the document above for the full version.

FCC Radio Test Report Report No. : FR611201-01AL TEL : 886-3-3273456 Page Number : 1 of 26 FAX : 886-3-3270973 Issued Date : Jun. 08, 2026 Report Template No.: HE1-C10 Ver4.4 Report Version : 01 FCC ID: QXO-AP3020W FCC Radio Test Report FCC ID : QXO-AP3020W Equipment : Access Point Brand Name : Extreme Networks Model Name : AP3020W Applicant : Extreme Networks, Inc. 2121 RDU Center Drive Morrisville North Carolina United States 27560 Manufacturer : Extreme Networks, Inc. 2121 RDU Center Drive Morrisville North Carolina United States 27560 Standard : 47 CFR FCC Part 15.247 The product was received on Jan. 16, 2026, and testing was started from Feb. 09, 2026 and completed on Apr. 28, 2026. We, SPORTON INTERNATIONAL INC. Hsinhua Laboratory, would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.10-2020 + Cor.1-2023 + C63.10a-2024 + Errata to C63.10a-2024 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Hsinhua Laboratory, the test report shall not be reproduced except in full. ___________________________________________ Approved by: Jackson Tsai __________________________________________ SDoC by: XXXXX SPORTON INTERNATIONAL INC. Hsinhua Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333411, Taiwan (R.O.C.) FCC Radio Test Report Report No. : FR611201-01AL TEL : 886-3-3273456 Page Number : 2 of 26 FAX : 886-3-3270973 Issued Date : Jun. 08, 2026 Report Template No.: HE1-C10 Ver4.4 Report Version : 01 FCC ID: QXO-AP3020W Table of Contents HISTORY OF THIS TEST REPORT .................................................................................................................. 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information .............................................................................................................................................. 5 1.2 Testing Applied Standards ..................................................................................................................... 8 1.3 Testing Location Information .................................................................................................................. 8 1.4 Measurement Uncertainty ...................................................................................................................... 8 2 TEST CONFIGURATION OF EUT......................................................................................................... 9 2.1 Test Channel Mode ................................................................................................................................ 9 2.2 The Worst Case Measurement Configuration ...................................................................................... 10 2.3 Accessories .......................................................................................................................................... 11 2.4 Support Equipment ............................................................................................................................... 11 2.5 Test Setup Diagram ............................................................................................................................. 12 3 TRANSMITTER TEST RESULT .......................................................................................................... 14 3.1 AC Power-line Conducted Emissions .................................................................................................. 14 3.2 DTS Bandwidth..................................................................................................................................... 16 3.3 Maximum Conducted Output Power .................................................................................................... 17 3.4 Power Spectral Density ........................................................................................................................ 19 3.5 Emissions in Non-restricted Frequency Bands .................................................................................... 20 3.6 Emissions in Restricted Frequency Bands ........................................................................................... 21 4 TEST EQUIPMENT AND CALIBRATION DATA ................................................................................ 25 APPENDIX A. TEST RESULTS OF AC POWER-LINE CONDUCTED EMISSIONS APPENDIX B. TEST RESULTS OF DTS BANDWIDTH APPENDIX C. TEST RESULTS OF MAXIMUM CONDUCTED OUTPUT POWER APPENDIX D. TEST RESULTS OF POWER SPECTRAL DENSITY APPENDIX E. TEST RESULTS OF EMISSIONS IN NON-RESTRICTED FREQUENCY BANDS APPENDIX F. TEST RESULTS OF EMISSIONS IN RESTRICTED FREQUENCY BANDS APPENDIX G. TEST RESULTS OF RADIATED EMISSION CO-LOCATION APPENDIX H. TEST PHOTOS PHOTOGRAPHS OF EUT V01 FCC Radio Test Report Report No. : FR611201-01AL TEL : 886-3-3273456 Page Number : 3 of 26 FAX : 886-3-3270973 Issued Date : Jun. 08, 2026 Report Template No.: HE1-C10 Ver4.4 Report Version : 01 FCC ID: QXO-AP3020W History of this test report Report No. Version Description Issued Date FR611201-01AL 01 Initial issue of report Jun. 08, 2026 FCC Radio Test Report Report No. : FR611201-01AL TEL : 886-3-3273456 Page Number : 4 of 26 FAX : 886-3-3270973 Issued Date : Jun. 08, 2026 Report Template No.: HE1-C10 Ver4.4 Report Version : 01 FCC ID: QXO-AP3020W Summary of Test Result Report Clause Ref.Std. Clause Test Items Result (PASS/FAIL) Remark 1.1.2 15.203 Antenna Requirement PASS - 3.1 15.207 AC Power-line Conducted Emissions PASS - 3.2 15.247(a) DTS Bandwidth PASS - 3.3 15.247(b) Maximum Conducted Output Powe…

Text truncated - open the document above for the full version.

Report No. : AP611201-01 Antenna Composite Gain Test Report TEL : 886-3-327-3456 Page No. : 1 of 14 FAX : 886-3-327-0973 Issued Date : Jun. 08, 2026 Report Template No.: HE1-U3 Ver1.0 Report Version : 01 Antenna Composite Gain Test Report Equipment Access Point Brand Name Extreme Networks Model Name AP3020W Applicant Extreme Networks, Inc. 2121 RDU Center Drive Morrisville North Carolina United States 27560 Manufacturer Extreme Networks Inc. 2121 RDU Center Drive Morrisville North Carolina United States 27560 Standard KDB 662911 D03 v02 Sample Received Jan. 16, 2026 Start Test Date Jan. 27, 2026 Final Test Date Jan. 27, 2026 ___________________________________________ Approved by: Jackson Tsai SPORTON INTERNATIONAL INC. Hsinhua Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333411, Taiwan (R.O.C.) Report No. : AP611201-01 Antenna Composite Gain Test Report TEL : 886-3-327-3456 Page No. : 2 of 14 FAX : 886-3-327-0973 Issued Date : Jun. 08, 2026 Report Template No.: HE1-U3 Ver1.0 Report Version : 01 Table of Contents History of this test report ................................................................................................................................. 3 1. Operation Mode and Antenna Information ........................................................................................ 4 2. Test Frequency ..................................................................................................................................... 4 3. Testing Location ................................................................................................................................... 5 4. Test Facility and Configuration ........................................................................................................... 6 5. Reference Calibration .......................................................................................................................... 7 6. Test Method .......................................................................................................................................... 8 7. Measured Values and Calculation of Maximum Gain Positions ...................................................... 9 8. Summary of Test Result .................................................................................................................... 11 9. Test Setup ........................................................................................................................................... 12 10. Test Equipment and Calibration Data .............................................................................................. 13 11. Test Results ..................................…

Text truncated - open the document above for the full version.