R6G-GSRMI24-2RF Module

GS Trading GSRMI24-2 Specification GSRMI24-2 2.4 GHz Digital RF Module Specification - Sensitivity : -93dBm / -82dBm @0.1% BER 250Kbps / 2.0Mbps(w/o ant.) - Data Rate : 250Kbps / 2.0Mbps - Operating Temperature : -40~+85 degree C - Built-in Antenna : -4.44dBi - TDD full-duplex, including decoder, encoder and 64byte FIFO data buffer. - Supports Auto ACK and & Retransmit - Supports Star-Network with 6 channels - Supports CRC - 4-wire digital interface (SPI) - Small footprint size : 20.5 * 18.0 * 3.8mm. 3. Application : - Wireless mouse, keyboard, joystick - Keyless entry - Alarm and security system - Home automation GS Trading GSRMI24-2 Specification Contents Page 1. Description2 2. Specification2 3. Application2 4. Pins Assignment3 5. PCB Dimension3 6. Mechanical specification4 7. Application circuit (For Reference)4 8. Layout Considerations5 - Sensitivity : -93dBm / -82dBm @0.1% BER 250Kbps / 2.0Mbps(w/o ant.) - Data Rate : 250Kbps / 2.0Mbps - Operating Temperature : -40~+85 degree C - Built-in Antenna : -4.44dBi - TDD full-duplex, including decoder, encoder and 64byte FIFO data buffer. - Supports Auto ACK and & Retransmit - Supports Star-Network with 6 channels - Supports CRC - 4-wire digital interface (SPI) - Small footprint size : 20.5 * 18.0 * 3.8mm. 3. Application : - Wireless mouse, keyboard, joystick - Keyless entry - Alarm and security system - Home automation 1 GS Trading GSRMI24-2 Specification 1. Description : GSRMI24-2 is a 2.4 GHz ISM band RF Module consists of an ARF2498 transceiver, a 16MHz crystal and Inverted F Antenna in a smaal board size. This module has high transmission data rate, low current consumption and simple control interface is easy to apply to the wireless products. 2. Specification : - Frequency : 2 402 MHz ~ 2 480 MHz - Channel Spacing : 1 MHz - Channel Switching Speed : <125 uS - Modulation Type : GFSK - Operation Voltage : (1.9 ~ 3.6) VDC - Output Power : +0 dBm - Sensitivity : -93 dBm / -82 dBm @0.1 % BER 250 kbps / 2.0 Mbps(w/o ant.) - Data Rate : 250 kbps / 2.0 Mbps - Operating Temperature : -40 ~ +85 degree C - Built-in Antenna : -4.44 dBi - TDD full-duplex, including decoder, encoder and 64 byte FIFO data buffer. - Supports Auto ACK and & Retransmit - Supports Star-Network with 6 channels - Supports CRC - 4-wire digital interface (SPI) - Small footprint size : (20.5 * 18.0 * 3.8) mm. 3. Application : - Wireless mouse, keyboard, joystick - Keyless entry - Alarm and security system - Home automation - Surveillance - Automotive - Telemetry - Industrial sensors - Wireless data communication - Toys 2 GS Trading GSRMI24-2 Specification 4. Pins Assignment : PinName Description a. Master output / slave input in SPI mode. b. Data input in buffer mode. T2SPI_CLK SPI input clock. T3GND Ground connection a. Master input / slave output in SPI mode. b. Data output in buffer mode. T5CSn SPI selection / programming enable. T6GND Ground connection a. Interrupt signal in buffer mode. b. Data input / data output in direct mode. T8CE Chip enable, enable voltagr regulator. T9VDD Power supply voltage +3.3V T10GND Ground connection 5. PCB Dimension : Top viewBottom view 3 T11, T12, T13, T14, T19 : GND DR_IRQT7 SPI_MISOT4 T1SPI_MOSI GS Trading GSRMI24-2 Specification 6. Mechanical specification DR_IRQ a. Interrupt signal in buffer mode. b. Data input / data output in direct mode. 7. Application circuit (For Reference) 4 GS Trading GSRMI24-2 Specification 8. Layout Considerations 5 The antenna keep-out area which is 5 mm around the parameter of the module region is shown in the red box. PCB material and signal traces should not be placed within the antenna keep-out area to assure potimum antenna performance.

SCS-F26 Modular Approval Letter Page 2 of 3 Rev 10.0 G.S. Trading Co., Ltd. (Date) 04/10/2015 (Product name) FCC ID : R6G-GSRMI24-2 , is seeking FCC Authorization as a Single Modular transmitter / Single Limited Modular Approval (Please check one). The EUT meets the requirements for Single Modular approval / Single Limited Modular Approval (please check one) as detailed in FCC public Notice DA00-1407. Compliance to each of the requirements is described below: Questions are: * Please provide a detailed explanation if the answer is “No.” Item Modular requirement Yes No 1 The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly; V 2 The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal; V 3 The module must contain power supply regulation on the module; V 4 The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b); V 5 The module must demonstrate compliance in a stand-alone configuration; V 6 The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements); V 7 The module must comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee; V 8 The module must comply with RF exposure requirements V Note: (1) LMA may be granted when one or more of the requirements in the table above cannot be demonstrated. LMA will also be issued in those instances where applicants can demonstrate that they will retain control over the final installation of the device, such that compliance of the end product is assured. In such cases, an operating condition on the LMA for the module must state that the module is only approved for use when installed in devices produced by a specific manufacturer. When LMA is sought, the application for equipment certification must specifically state how control of the end product into which the module will be installed, and will be maintained, such that full compliance of the end product is always ensured. (2) Please provide Clear and specific instructions describing the conditions, limitations and procedures for third-parties to use and/or integrate the module into a host device. (3) For non-Software Defined Radio transmitter modules where software is used to ensure compliance of the device, technical description of how such control is implemented to ensure prevention of third party modification must be provided (see KDB 594280). Note 1: Compliance of a module in its final configuration is the responsibility of the applicant. A host device will not be considered certified if the instructions regarding antenna configuration provided in the original description, of one or more separately certified modules it contains, were not followed. Example: A separately certified low-power transceiver module using Bluetooth technology which is housed in a desktop computer, laptop or peripheral does not require the overall system to be recertified, if the desktop computer, laptop or peripheral, as a stand-alone unit, complies with all applicable technical standards. ____________________________ Client’s signature : G.S.Trading Co., Ltd. Client’s name / title : Youngchul, Na / Representative SCS-F26 Modular Approval Letter Page 3 of 3 Rev 10.0 G.S. Trading Co., Ltd. Rm 301, Sang bo B/D, 396-223, Sindorim-Dong, Kuro-Ku, Seoul, Korea. Date: April 10, 2015 Attn: Director of Certification Request for Single Modular Approval for FCC ID: R6G-GSRMI24-2 Please accept our request for Limited Single Modular Approval in accordance with the requirements of 15.212 as described below. 15.212(a)(1) Single modular transmitters must meet the following requirements to obtain a modular transmitter approval. (i) This module does have its own shielding (ii) This module has buffered modulation/data inputs. (iii) This module has integrated with Power Supply regulator. (iv) This module complied with the antenna requirement of section 15.203, because the antenna is PCB pattern antenna. (v) This module was tested in a standalone-configuration for radiated emissions (vi) The Module will be labeled with its own FCC ID Number. (vii) This module complies with the requirements of part 15.207 for AC power line conducted emissions and part 15.249 for operation in 2 402 – 2480 MHz frequency band and must only be used with the antenna that were tested in this filing. (Viii) This module complied with any applicable RF exposure requirement. Sincerely Yours, ____________________________ Client’s signature : G.S.Trading Co., Ltd. Client’s name / title : Youngchul, Na / Representative Contact information / address : Rm 301, Sang bo B/D, 396-223, Sindorim-Dong, Kuro-Ku, Seoul, Korea Telephone: +82-2-858-1255 Fax No.: +82-2-858-1257 E-mail: [email protected]

SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 G.S. Trading Co., Ltd. (April 10, 2015) To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, G.S. Trading Co., Ltd. hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): (RF Module, GSRMI24-2) FCC ID: R6G-GSRMI24-2 Sincerely, ____________________________ Client’s signature : G.S.Trading Co., Ltd. Client’s name / title : Youngchul, Na / Representative Contact information / address : Rm 301, Sang bo B/D, 396-223, Sindorim-Dong, Kuro-Ku, Seoul, Korea Telephone: +82-2-858-1255 Fax No.: +82-2-858-1257 E-mail: [email protected]

SCS-F19: Confidentiality Request Letter Page 2 of 3 Rev 4.0 G.S. Trading Co., Ltd. (April 10, 2015) To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: R6G-GSRMI24-2 We hereby request confidential treatment of information accompanying this application as outlined below: - e.g. Block Diagram - e.g. Schematics - e.g. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ____________________________ Client’s signature : G.S.Trading Co., Ltd. Client’s name / title : Youngchul, Na / Representative Contact information / address : Rm 301, Sang bo B/D, 396-223, Sindorim-Dong, Kuro-Ku, Seoul, Korea Telephone: +82-2-858-1255 Fax No.: +82-2-858-1257 E-mail: [email protected] SCS-F19: Confidentiality Request Letter Page 3 of 3 Rev 4.0 G.S. Trading Co., Ltd. (April 10, 2015) To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: R6G-GSRMI24-2 To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days (please check one). - User Manual - External Photos - Internal Photos - Test Setup photo The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, ____________________________ Client’s signature : G.S.Trading Co., Ltd. Client’s name / title : Youngchul, Na / Representative Contact information / address : Rm 301, Sang bo B/D, 396-223, Sindorim-Dong, Kuro-Ku, Seoul, Korea Telephone: +82-2-858-1255 Fax No.: +82-2-858-1257 E-mail: [email protected]

Page 1 of 2 Page 2 of 2

Page 1 of 1 IDENTIFICATION LABEL: PROPOSED FCC ID LABEL The FCC ID shall be permanently affixed in the rear side of the equipment This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. Made in Korea FCC ID : R6G-GSRMI24-2

Page 1 of 2 Page 2 of 2

Page 1 of 23 Report No. : W154R-D002 It should not be reproduced except in full, without the written approval of ONETECH. EMC-003 (Rev.2) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div. : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) ELECTROMAGNETIC EMISSION COMPLIANCE REPORT FOR LOW-POWER, NON-LICENSED TRANSMITTER Test Report No. : W154R-D002 AGR No : A151A-094 Applicant : G.S. Trading Co., Ltd. Address : Rm 301, Sang bo B/D, 396-223, Sindorim-Dong, Kuro-Ku, Seoul, Korea Manufacturer : G.S. Trading Co., Ltd. Address : Rm 301, Sang bo B/D, 396-223, Sindorim-Dong, Kuro-Ku, Seoul, Korea Type of Equipment : RF Module FCC ID. : R6G-GSRMI24-2 Model Name : GSRMI24-2 Serial number : N/A Total page of Report : 23 pages (including this page) Date of Incoming : March 10, 2015 Date of issue : April 06, 2015 SUMMARY The equipment complies with the regulation; FCC Part 15 Subpart C Section 15.249. This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. Reviewed by: Approved by: Ki-Hong, Nam / Asst, Chief Engineer Sung-Ik, Han/ Managing Director ONETECH Corp. ONETECH Corp. Page 2 of 23 Report No. : W154R-D002 It should not be reproduced except in full, without the written approval of ONETECH. EMC-003 (Rev.2) HEAD OFFICE : 301-14 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMC Testing Div. : 307-51 Daessangnyeong-ri, Chowol-eup, Gwangju-si, Gyeonggi-do 464-862 Korea (TEL: 82-31-765-8289, FAX: 82-31-766-2904) CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE ............................................................................................. 5 2. TEST SUMMARY .............................................................................................................................. 6 2.1 TEST ITEMS AND RESULTS ................................................................................................................................................. 6 2.2 ADDITIONS, DEVIATIONS, EXCLUSIONS FROM STANDARDS ............................................................................................... 6 2.3 RELATED SUBMITTAL(S) / GRANT(S) ................................................................................................................................ 6 2.4 PURPOSE OF THE TEST ....................................................................................................................................................... 6 2.5 TEST METHODOLOGY ........................................................................................................................................................ 6 2.6 TEST FACILITY ................................................................................................................................................................... 6 3. GENERAL INFORMATION ............................................................................................................ 7 3.1 PRODUCT DESCRIPTION ..................................................................................................................................................... 7 3.2 MODEL DIFFERENCES........................................................................................................................................................ 7 4. EUT MODIFICATIONS .................................................................................................................... 7 5. SYSTEM TEST CONFIGURATION ............................................................................................... 8 5.1 JUSTIFICATION ................................................................................................................................................................... 8 5.2 PERIPHERAL EQUIPMENT .................................................................................................................................................. 8 5.3 MODE OF OPERATION DURING THE TEST .......................................................................................................................... 8 5.4 CONFIGURATION OF TEST SYSTEM ................................................................................................................................... 8 5.5 ANTENNA REQUIREMENT .................................................................................................................................................. 8 6. PRELIMINARY TEST ...................................................................................................................... 9 6.1 AC POWER LINE CONDUCTED EMISSIONS TESTS ............................................................................................................. 9 6.2 GENERAL RADIATED EMISSIONS TESTS ........................................................................................................................... 9 7. RADIATED EMISSION TEST ....................................................................................................... 10 7.1 TEST SET-UP ..................................................................................................................................................................... 10 7.2 MEASUREMENT UNCERTAINTY ....................................................................................................................................... 10 7.3 TEST EQUIPMENT USED .................................................................................................................................................... 10 7.4 FINAL RESULT OF MEASUREMENT ........................................................................................................…

Text truncated - open the document above for the full version.

Page 1 of 3 - Conducted Emission Test Page 2 of 3 - Radiated Emission Test Page 3 of 3