R8QMCX-608GSM Tri-Band 900/1800/1900 MHz Cellular Phone

MACRONIX MCX-608 CONNECTING THE WORLD GSM900/DCS1800/PCS1900 Tri-Band Cellular Phone __________________________ User Guide 2 Macronix MCX-608User Guide Body-worn RF exposure statement: This device was tested for typical body-worn operations with the back of the phone kept 1.5 cm from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 1.5 cm must be maintained between the user’s body and the back of the phone, including the antenna, whether extended or retracted. Third-party belt clips, holsters, and similar accessories containing metallic components should not be used. Body-worn accessories that cannot maintain 1.5 cm separation distance between the user’s body and the back of the phone, and have not been tested for typical body-worn operations may not comply with FCC RF exposure limits and should be avoided. 3 Macronix MCX-608User Guide Contents Safety Overview.............................................................................. 6 Diagram of your Phone .................................................................... 7 Parts of the phone ........................................................................... 8 Quick Start Guide............................................................................ 9 A. Remove the Phone’s Back Cover ................................................ 9 B. Install the SIM Card ..................................................................... 9 C. Install the Battery ........................................................................ 9 D. Replace the Phone’s Back Cover .............................................. 10 E. Charge the Battery .................................................................... 10 F. Turn On the Phone.................................................................... 10 G. Make a Call ............................................................................... 10 H. Answer a Call ............................................................................ 10 How to use this guide .................................................................... 11 Entering Letters and Numbers ....................................................... 12 Menu............................................................................................. 16 1. Call Log..................................................................................... 19 2. Messages .................................................................................. 21 2.3 Send Msg................................................................................ 24 2.4 Voice Mail ................................................................................ 24 2.4.1 Call Voice Mail ...................................................................... 24 2.4.2 Set Voice Mail ....................................................................... 24 2.5.1 SMS Notify............................................................................ 25 2.5.2 CBMS On/Off ........................................................................ 25 2.5.3 Msg Setting (Message Setting) ............................................. 25 2.5.3.1 Service Center ................................................................... 25 2.5.3.2 Expiry Period..................................................................... 25 3. Call Options............................................................................... 26 3.1 Call Divert................................................................................ 28 3.2 Call Barring.............................................................................. 28 3.3 Call Waiting............................................................................. 29 3.4 Caller ID.................................................................................. 30 4. Settings..................................................................................... 31 4.1 Call Alert.................................................................................. 32 4.1.1 Ring Tone ............................................................................. 32 4.1.2 Ring Volume ......................................................................... 32 4.1.4 Listening Volume .................................................................. 33 4.2 Language................................................................................. 33 4.3 Display Setup........................................................................... 33 4.4 Any Key Answer ...................................................................... 34 4 Macronix MCX-608User Guide 4.5 Network Selection.................................................................... 34 Other Settings............................................................................... 35 4.7 Speed Dial............................................................................... 35 4.8 Voice Mail Speed Key .............................................................. 35 4.9 Back Light................................................................................ 35 4.10 Software Version................................................................... 35 4.11 Set Default ............................................................................. 35 5. Security ..................................................................................... 37 5.1 Change PIN............................................................................. 37 5.2 FDN Mode............................................................................... 37 5.3 Keypad Lock............................................................................ 38 6. My Phone Number ..................................................................... 39 6.1 View Phone # ........................................................................... 39 6.2 Edit Phone # ............................................................................ 39 7. Call Time, Cost .…

Text truncated - open the document above for the full version.

Macronix America Inc. 491 Fairview Way Milpitas, CA 95035 Date: Oct 5, 2004 Federal Communications Commission Equipment Authorization branch 7435 Oakland Mills Road Columbia, MD 21046 Re: Request for Confidentiality Gentlemen: In reference to the application under FCC ID: R8QMCX-608 and pursuant to Sections 0.457(d)(l)(ii) and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of the accompanying information as outlined below: Schematics Block Diagrams Theory of Operation, Tune Up Procedure These documents contain detailed system and equipment description and related information about the product that Macronix America Inc. considers to be proprietary, confidential, and a custom design and, otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, Macronix America Inc. considers that this information would be of benefit to its competitors, and that disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, Joseph Ho Joseph Ho Product Manager, Wireless Macronix America Inc.

1 Mike Kuo From: Claire Hoque Sent: November012004Monday 10:16 AM To: Mike Kuo Cc: Jack He; Sunny Shih Subject: RE: Macronix America Inc., FCC ID: R8QMCX-608, Assessment NO.: AN04T4242, Notice#1 Hi Mike, Sunny has done additional test and revised SAR report and two SAR attachments for Q3. Pls kindly review the attached files. Thanks, Claire 04U3001-2 Revised SAR Report_1... 1_System Performance Check Plo... 2_SAR Test Plots.pdf -----Original Message----- From: Mike Kuo Sent:Wednesday, October 27, 2004 6:05 PM To:Claire Hoque Cc:Thu Chan; Jack He; Sunny Shih Subject:RE: Macronix America Inc., FCC ID: R8QMCX-608, Assessment NO.: AN04T4242, Notice#1 Hi Cliare : Reply to Question #3: Based upon the screen shot, the secondary spot setting does not comply with OET 65 Supplement C guideline. The SAR system was configured with two conditions: within 2 dB of max. peak AND with the peak reading greater than 0.5W/kg. So in order for the probe to detect the secondary peak, both conditions have to be met. Based upon SAR test report, the highest SAR value is reported as 0.704 W/kg @ channel 812 left head tilt position. The 58.5% of 0.704W/kg is 0.411W/kg which is below 0.5W/kg so the secondary peak is not reported. To comply with OET 65 supplement C requirement, please provide secondary hot spot @ channel 812 left head tilt position. Best Regards Mike Kuo -----Original Message----- From: Sent: To: Cc: Subject: Hi Mike, Here are the answers. Question #1: The tune up procedures submitted is labeled with confidential document. However, Tune up procedure is not included in the request for confidentiality letter. Please make necessary correction. <answer>Pls see revised confidentiality letter which includes tune up procedure. << File: Request for Confidentiality(revised).pdf >> Question #2: In the section 2 of Part 24 test report, the upper frequency listed is 1909.9MHz which does not agree with measured frequencies listed in the SAR test report and associated documentation. Please make necessary correction. 2 <answer>Test Report is revised. << File: 04U3001-1 FCC24 REPORT Revised.pdf >> Question #3: In the SAR plots, there are several configuration displayed with multiple peak. As indicated in the SAR plots, the setting of SAR measurement system is configured to detect the secondary hot spot within 2 dB of max. measured Peak. Please provide a screen shot of such setting in DASY 4 system. <answer>Screen shot of DASY4 System setting is attached. << File: Screenshot of DASY4.pdf >> Question #4: User manual does not include RF exposure information about body worn operation. Please provide revised user manual to comply this requirement. <answer>User manual is revised. << File: MCX-608 Revised User Guide_2004-10-27.pdf >> Question #5: Please inform the Class of GSM phone ( A, B or C ). <answer>The phone has no GPRS function, so this question does not apply to this project. Question #6: Please confirm the this device does not capable of GPRS modulation. <answer>GPRS not supported. Thanks, Claire

MACRONIX AMERICA, INC. MODEL: MCX-608 Made in U.S.A. FCC ID: R8QMCX-608 MACRONIX AMERICA, INC. MODEL: MCX-608 Made in U.S.A. FCC ID: R8QMCX-608 Exhibit 1: Type LabelFCC ID: R8QMCX-608 Applicant: Macronix America, Inc. Copyright 2004 Macronix America, Inc. All rights reserved. October 5, 2004

Macronix America Inc. Confidential 1 of 2 Antenna Specifications for MCX-608 1. Electrical Specifications 1-1. Frequency Band Frequency Band TX(MHz) RX(MHz) PCS1900 1850 ~ 1910 1930 ~ 1990 1-2. V.S.W.R Test Condition V.S.W.R Free Space 2.0 Max. 1-3. Impedance : Nominal 50 ±10 Ohms including matching circuit 1-4. Gain Test Condition Gain Average -1dBi nominal Peak 3.0dBi nominal 2. Mechanical Specifications 2-1. Shape : Stub (helical) 2-2. Connection Type : Snap-in 2-3. Dimensions : See attached drawing

Date/Time: 09/28/04 09:40:13 Test Laboratory: Compliance Certification Services 5_System Performance Check @ 1900MHz DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN:5d043 Phantom section: Flat Section Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.4 mho/m; ε r = 39.3; ρ = 1000 kg/m 3 Measurement Standard: DASY4 (High Precision Assessment) z Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.5 deg. C z Area Scan setting - Find Secondary Maximum Within: 2.0 dB (58.35%) z Probe: EX3DV3 - SN3531; ConvF(8.98, 8.98, 8.98); z Sensor-Surface: 2.5mm (Mechanical Surface Detection) z Electronics: DAE3 Sn500; Calibrated: 12/23/2003 z Phantom: SAM 2; Type: SAM 2; Serial: 1050 z Measurement SW: DASY4, V4.3 Build 16; Postprocessing SW: SEMCAD, V1.8 Build 123 d=10mm; Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 13.3 mW/g d=10mm; Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 99.3 V/m; Power Drift = -0.1 dB Peak SAR (extrapolated) = 17.7 W/kg SAR(1 g) = 9.77 mW/g; SAR(10 g) = 5.07 mW/g Maximum value of SAR (measured) = 13.2 mW/g 0 dB = 13.2mW/g Date/Time: 09/28/04 09:40:13 Test Laboratory: Compliance Certification Services 5_System Performance Check @ 1900MHz DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN:5d043 Phantom section: Flat Section Measurement Standard: DASY4 (High Precision Assessment) d=10mm; Pin=250mW/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Maximum value of SAR (measured) = 15.7 mW/g Date/Time: 09/29/04 09:40:39 Test Laboratory: Compliance Certification Services 5_System Performance Check @ 1900MHz DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN:5d043 Phantom section: Flat Section Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.43 mho/m; ε r = 39.9; ρ = 1000 kg/m 3 Measurement Standard: DASY4 (High Precision Assessment) z Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.5 deg. C z Area Scan setting - Find Secondary Maximum Within: 2.0 dB (58.35%) z Probe: EX3DV3 - SN3531; ConvF(8.98, 8.98, 8.98); z Sensor-Surface: 2.5mm (Mechanical Surface Detection) z Electronics: DAE3 Sn500; Calibrated: 12/23/2003 z Phantom: SAM 2; Type: SAM 2; Serial: 1050 z Measurement SW: DASY4, V4.3 Build 16; Postprocessing SW: SEMCAD, V1.8 Build 123 d=10mm; Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 13.4 mW/g d=10mm; Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 98.6 V/m; Power Drift = -0.005 dB Peak SAR (extrapolated) = 17.9 W/kg SAR(1 g) = 9.9 mW/g; SAR(10 g) = 5.15 mW/g Maximum value of SAR (measured) = 13.3 mW/g 0 dB = 13.3mW/g Date/Time: 09/29/04 09:40:39 Test Laboratory: Compliance Certification Services 5_System Performance Check @ 1900MHz DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN:5d043 Phantom section: Flat Section Measurement Standard: DASY4 (High Precision Assessment) d=10mm; Pin=250mW/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Maximum value of SAR (measured) = 15.9 mW/g Date/Time: 10/31/04 16:17:13 Test Laboratory: Compliance Certification Services System Performance Check @ 1900MHz DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN:5d043 Phantom section: Flat Section Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.45 mho/m; ε r = 40.7; ρ = 1000 kg/m 3 Measurement Standard: DASY4 (High Precision Assessment) z Room Ambient Temperature: 23.0 deg. C; Liquid Temperature: 22.5 deg. C z Area Scan setting - Find Secondary Maximum Within: 20 dB and with a peak SAR value greater than 0.0012 W/kg z Probe: EX3DV3 - SN3531; ConvF(8.98, 8.98, 8.98); z Sensor-Surface: 2.5mm (Mechanical Surface Detection) z Electronics: DAE3 Sn500; Calibrated: 12/23/2003 z Phantom: SAM 2; Type: SAM 2; Serial: 1050 z Measurement SW: DASY4, V4.3 Build 22; Postprocessing SW: SEMCAD, V1.8 Build 127 d=10mm; Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 13.3 mW/g d=10mm; Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 292.4 V/m; Power Drift = 0.0 dB Peak SAR (extrapolated) = 17.9 W/kg SAR(1 g) = 9.89 mW/g; SAR(10 g) = 5.13 mW/g 0 dB = 13.3mW/g Date/Time: 10/31/04 16:17:13 Test Laboratory: Compliance Certification Services System Performance Check @ 1900MHz DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN:5d043 Phantom section: Flat Section Measurement Standard: DASY4 (High Precision Assessment) d=10mm; Pin=250mW/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Maximum value of SAR (measured) = 12.9 mW/g

Date/Time: 09/29/04 10:46:43 Test Laboratory: Compliance Certification Services Left Hand Side DUT: Macronix; Type: MCX-608; Serial: N/A Phantom section: Left Section Frequency: 1880 MHz;Duty Cycle: 1:8 Medium parameters used: f = 1880 MHz; σ = 1.41 mho/m; ε r = 39.9; ρ = 1000 kg/m 3 Measurement Standard: DASY4 (High Precision Assessment) z Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.5 deg. C z Area Scan setting - Find Secondary Maximum Within: 2.0 dB (58.35%) z Probe: EX3DV3 - SN3531; ConvF(8.98, 8.98, 8.98); z Sensor-Surface: 2.5mm (Mechanical Surface Detection) z Electronics: DAE3 Sn500; Calibrated: 12/23/2003 z Phantom: SAM 2; Type: SAM 2; Serial: 1050 z Measurement SW: DASY4, V4.3 Build 16; Postprocessing SW: SEMCAD, V1.8 Build 123 Touch position - Mid-ch/Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.574 mW/g Touch position - Mid-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 20.6 V/m; Power Drift = 0.0 dB Peak SAR (extrapolated) = 0.916 W/kg SAR(1 g) = 0.536 mW/g; SAR(10 g) = 0.295 mW/g Maximum value of SAR (measured) = 0.699 mW/g Date/Time: 09/29/04 10:46:43 Test Laboratory: Compliance Certification Services Left Hand Side DUT: Macronix; Type: MCX-608; Serial: N/A Phantom section: Left Section Frequency: 1909.8 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f = 1909.8 MHz; σ = 1.43 mho/m; ε r = 39.8; ρ = 1000 kg/m 3 Measurement Standard: DASY4 (High Precision Assessment) z Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.5 deg. C z Area Scan setting - Find Secondary Maximum Within: 2.0 dB (58.35%) z Probe: EX3DV3 - SN3531; ConvF(8.98, 8.98, 8.98); z Sensor-Surface: 2.5mm (Mechanical Surface Detection) z Electronics: DAE3 Sn500; Calibrated: 12/23/2003 z Phantom: SAM 2; Type: SAM 2; Serial: 1050 z Measurement SW: DASY4, V4.3 Build 16; Postprocessing SW: SEMCAD, V1.8 Build 123 Touch position - High-ch/Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.708 mW/g Touch position - High-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 22.3 V/m; Power Drift = -0.007 dB Peak SAR (extrapolated) = 1.11 W/kg SAR(1 g) = 0.646 mW/g; SAR(10 g) = 0.355 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.843 mW/g Date/Time: 09/29/04 10:46:43 Test Laboratory: Compliance Certification Services Left Hand Side DUT: Macronix; Type: MCX-608; Serial: N/A Phantom section: Left Section Frequency: 1850.2 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f = 1850.2 MHz; σ = 1.39 mho/m; ε r = 40; ρ = 1000 kg/m 3 Measurement Standard: DASY4 (High Precision Assessment) z Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.5 deg. C z Area Scan setting - Find Secondary Maximum Within: 2.0 dB (58.35%) z Probe: EX3DV3 - SN3531; ConvF(8.98, 8.98, 8.98); z Sensor-Surface: 2.5mm (Mechanical Surface Detection) z Electronics: DAE3 Sn500; Calibrated: 12/23/2003 z Phantom: SAM 2; Type: SAM 2; Serial: 1050 z Measurement SW: DASY4, V4.3 Build 16; Postprocessing SW: SEMCAD, V1.8 Build 123 Tilt position - Low-ch/Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.674 mW/g Tilt position - Low-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 21.8 V/m; Power Drift = -0.0 dB Peak SAR (extrapolated) = 1.09 W/kg SAR(1 g) = 0.639 mW/g; SAR(10 g) = 0.345 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.827 mW/g Date/Time: 09/29/04 10:46:43 Test Laboratory: Compliance Certification Services Left Hand Side DUT: Macronix; Type: MCX-608; Serial: N/A Phantom section: Left Section Frequency: 1880 MHz;Duty Cycle: 1:8 Medium parameters used: f = 1880 MHz; σ = 1.41 mho/m; ε r = 39.9; ρ = 1000 kg/m 3 Measurement Standard: DASY4 (High Precision Assessment) z Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.5 deg. C z Area Scan setting - Find Secondary Maximum Within: 2.0 dB (58.35%) z Probe: EX3DV3 - SN3531; ConvF(8.98, 8.98, 8.98); z Sensor-Surface: 2.5mm (Mechanical Surface Detection) z Electronics: DAE3 Sn500; Calibrated: 12/23/2003 z Phantom: SAM 2; Type: SAM 2; Serial: 1050 z Measurement SW: DASY4, V4.3 Build 16; Postprocessing SW: SEMCAD, V1.8 Build 123 Tilt position - Mid-ch/Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.605 mW/g Tilt position - Mid-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 20.5 V/m; Power Drift = 0.0 dB Peak SAR (extrapolated) = 0.967 W/kg SAR(1 g) = 0.566 mW/g; SAR(10 g) = 0.306 mW/g Maximum value of SAR (measured) = 0.731 mW/g Date/Time: 09/29/04 10:46:43 Test Laboratory: Compliance Certification Services Left Hand Side DUT: Macronix; Type: MCX-608; Serial: N/A Phantom section: Left Section Frequency: 1909.8 MHz;Duty Cycle: 1:8 Medium parameters used (interpolated): f = 1909.8 MHz; σ = 1.43 mho/m; ε r = 39.8; ρ = 1000 kg/m 3 Measurement Standard: DASY4 (High Precision Assessment) z Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.5 deg. C z Area Scan setting - Find Secondary Maximum Within: 2.0 dB (58.35%) z Probe: EX3DV3 - SN3531; ConvF(8.98, 8.98, 8.98); z Sensor-Surface: 2.5mm (Mechanical Surface Detection) z Electronics: DAE3 Sn500; Calibrated: 12/23/2003 z Phantom: SAM 2; Type: SAM 2; Serial: 1050 z Measurement SW: DASY4, V4.3 Build 16; Postprocessing SW: SEMCAD, V1.8 Build 123 Tilt position - High-ch/Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.744 mW/g Tilt position - High-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Referen…

Text truncated - open the document above for the full version.

FCC CFR47 CERTIFICATION PART 24E TEST REPORT FOR GSM Tri-band 900/1800/1900MHz Cellular Phone MODEL: MCX-608 FCC ID: R8QMCX-608 REPORT NUMBER: 04U3001-1 ISSUE DATE: SEPTEMBER 25, 2004 Prepared for MACRONIX AMERICA INC. 491 FAIRVIEW WAY MILPITAS, CA 95035, USA Prepared by COMPLIANCE CERTIFICATION SERVICES 561F MONTEREY ROAD, ROUTE 2 MORGAN HILL, CA 95037, USA TEL: (408) 463-0885 FAX: (408) 463-0888 REPORT NO: 04U3001-1 DATE: SEPTEMBER 25, 2004 EUT: GSM Tri-band 900/1800/1900MHz Cellular Phone FCC ID: R8QMCX-608 Page 2 of 32 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. TABLE OF CONTENT 1. TEST RESULT CERTIFICATION.................................................................................................. 3 2. EUT DESCRIPTION ......................................................................................................................... 4 3. TEST METHODOLOGY .................................................................................................................. 4 4. TEST FACILITY................................................................................................................................ 4 5. ACCREDITATION AND LISTING................................................................................................. 4 6. MEASURING INSTRUMENT CALIBRATION ............................................................................ 4 7. TEST SETUP, PROCEDURE AND RESULT................................................................................. 5 7.1. SECTION 2.1046: RF POWER OUTPUT ................................................................................... 5 7.2. SECTION 2.1047: MODULATION CHARACTERISTICS ..................................................... 13 7.3. SECTION 2.1049: OCCUPIED BANDWIDTH ........................................................................ 13 7.4. SECTION 2.1051: SPURIOUS EMISSION AT ANTENNA TERMINAL .............................. 17 7.5. SECTION 2.1053: FIELD STRENGTH OF SPURIOUS RADIATION ................................... 23 7.6. SECTION 2.1055: FREQUENCY STABILITY ........................................................................ 28 8. APPENDICES ................................................................................................................................... 32 8.1. EXTERNAL & INTERNAL PHOTOS ...................................................................................... 32 8.2. SCHEMATICS ........................................................................................................................... 32 8.3. BLOCK DIAGRAM ...................................................................................................................32 8.4. USER MANUAL ........................................................................................................................ 32 REPORT NO: 04U3001-1 DATE: SEPTEMBER 25, 2004 EUT: GSM Tri-band 900/1800/1900MHz Cellular Phone FCC ID: R8QMCX-608 Page 3 of 32 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 1. TEST RESULT CERTIFICATION COMPANY NAME: MACRONIX AMERICA INC. 491 FAIRVIEW WAY MILPITAS, CA 95035, USA EUT DESCRIPTION: GSM Tri-band 900/1800/1900MHz Cellular Phone MODEL NUMBER: MCX-608 DATE TESTED: 9/23/2004 – 9/25/2004 TYPE OF EQUIPMENT INTENTIONAL RADIATOR, LICENSED TX MODULE IN MOBILE APPLICATION MEASUREMENT PROCEDURE ANSI C63.4 / 2001, TIA/EIA 603 PROCEDURE CERTIFICATION FCC RULE CFR 47 PART 24 Subpart E Compliance Certification Services, Inc. tested the above equipment for compliance with the requirement set forth in CFR 47, PART 24 Subpart E-Broadband PCS. The equipment in the configuration described in this report, shows the measured emission levels emanating from the equipment do not exceed the specified limit. Note: This document reports conditions under which testing was conducted and results of tests performed. This document may not be altered or revised in any way unless done so by Compliance Certification Services and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by Compliance Certification Services will constitute fraud and shall nullify the document. Tested By: Released For CCS By: WILLIM ZHUANG THU CHAN EMC ENGINEER EMC SUPERVISOR COMPLIANCE CERTIFICATION SERVICES COMPLIANCE CERTIFICATION SERVICES REPORT NO: 04U3001-1 DATE: SEPTEMBER 25, 2004 EUT: GSM Tri-band 900/1800/1900MHz Cellular Phone FCC ID: R8QMCX-608 Page 4 of 32 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 2. EUT DESCRIPTION The device has built in Tri-Band GSM900, DCS1800, and PCS1900 cellular antenna embedded in the only PCS used in the U.S. for this product. The EUT of GSM1900 has an output power of 30.2dBm / 1.047W (EIRP) which is designed for the bands transmitting of frequency range 1850.2MHz to 1909.8MHz. 3. TEST METHODOLOGY Both conducted and radiated testing were performed according to the procedures documented on chapter 13 of ANSI C63.4 and FCC CFR 47 2.1046, 2.1047, 2.1…

Text truncated - open the document above for the full version.

REPORT NO: 04U3001-1 DATE: SEPTEMBER 25, 2004 EUT: GSM Tri-band 900/1800/1900MHz Cellular Phone FCC ID: R8QMCX-608 Page 9 of 32 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. Radiated Emissions X –Orientation REPORT NO: 04U3001-1 DATE: SEPTEMBER 25, 2004 EUT: GSM Tri-band 900/1800/1900MHz Cellular Phone FCC ID: R8QMCX-608 Page 10 of 32 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. Y –Orientation REPORT NO: 04U3001-1 DATE: SEPTEMBER 25, 2004 EUT: GSM Tri-band 900/1800/1900MHz Cellular Phone FCC ID: R8QMCX-608 Page 11 of 32 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. Z–Orientation REPORT NO: 04U3001-1 DATE: SEPTEMBER 25, 2004 EUT: GSM Tri-band 900/1800/1900MHz Cellular Phone FCC ID: R8QMCX-608 Page 26 of 32 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. Radiated Emission Setup Photos: REPORT NO: 04U3001-1 DATE: SEPTEMBER 25, 2004 EUT: GSM Tri-band 900/1800/1900MHz Cellula…

Text truncated - open the document above for the full version.