RGJBASE01800-00006-00

User Guide Thank you for purchasing this Wabi Buddies TM product. This guide contains important information on the use and care of your new Wabi Buddy. PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. To ensure messages are received in a timely manner, Wabi’s power switch should be kept in the “on” position at all times. To save battery power, Wabi will automatically “go to sleep” after 10 minutes of inactivity. If a message is received when Wabi is in sleep mode, the green or amber LED on his chest badge will blink to indicate that a message has arrived. IMPORTANT: Charge the battery for 12 hours before first use. For best performance, Wabi should be recharged weekly (and whenever the red LED light on Wabi’s chest badge is blinking). TM Table of Contents Important safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 How Wabi works. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Getting started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Connecting and registering your Wabi Buddy Connecting more than one Wabi Buddy in the same house Adding additional users Included with your registration Sending messages to Wabi TM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Moving Wabi to a new household (temporarily or permanently) Types of messages you can send Wabi credits and your Wabi account Wabiland TM credit plans Sending messages to a Wabi Buddy via phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Sending a message to a Wabi Buddy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Sending messages to Wabi via Wabiland’s website Scheduling automatic delivery of pre-recorded messages . . . . . . . . . . . . . . . . . . . . 8 Listening to messages sent to Wabi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 When Wabi receives messages Listening to personal messages Listening to stories, songs, lullabies and other content sent to Wabi Listening to Wabi’s own per-programmed messages Best buddy message General operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Volume control For best performance of base unit Remove messages and content Recharging the battery Shutting Wabi off Changing the battery Cleaning your Wabi Buddy Troubleshooting Customer service FCC Notice FCC and other information Ringer equivalence no. (REN) Warranty information Wabi Privacy Policy Overview of Wabi Privacy Policy Overview of Wabi Terms of Service 1 IMPORTANT SAFETY INSTRUCTIONS When using this product, basic safety precautions should always be followed to reduce the risk of fire, electric shock or personal injury. 1. Read, understand and follow all instructions carefully. 2. Unplug base unit before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth only. 3. Do not use the base unit or product near water (for example: near a bathtub, washbowl, kitchen sink, etc.). 4. Use only the power source marked on the unit. If you are not sure of the type of power supplied to your home, please consult your local power company. 5. Place the base unit securely on a stable surface. Damage and/or injury may result if the unit falls. Do not set the base unit or bear on a heating register or over a radiator. Ensure proper ventilation for the base unit. 6. Do not place objects on the power cord. Install the unit where no one can step or trip on the cord. 7. Do not overload wall outlets or extension cords. This will increase the risk of fire or electric shock. 8. To prevent fire or shock hazard, do not expose this product to rain or any type of moisture. 9. The base unit is for adult use only! Never allow children to charge the battery or play with the cords. A child can be injured by the electricity invloved in charging, or become entagled in the cords. 10. Set up and use of the base unit must be done by adults only. 11. Do not disassemble this unit or any of the product components. Opening the unit may expose you to dangerous voltages or other risks. Send the unit to an authorized service center when service is required. 12. Unplug this unit from the wall outlet and refer to Wabi Technical Support when any of the following conditions occur: •The power supply cord or plug is damaged or frayed •Liquid has been spilled in the unit or the unit has been immersed in water •The unit does not work normally after following the operating instructions in the User Guide •The unit has been dropped or damaged •The unit has a distinct change in performance 13. Keep batteries out of reach of children. Do not burn, disassemble, mutilate or puncture the battery. The battery contains toxic materials that could be released, resulting in injury. Never dispose of batteries in a fire because they may explode. 14. The rechargeable batteries that power this product must be disposed of properly and may need to be recycled. Refer to your battery's label for the battery type. Contact your local recycling center for proper disposal methods. WARNING ! WARNING IN THE EVENT THAT THE PHONE IS NEEDED IMMEDIATELY WHILE YOUR WABI BUDDY IS RECEIVING A MESSAGE, PLEASE DISCONNECT THE BASE UNIT FROM THE POWER SOURCE. THIS WILL RELEASE THE PHONE LINE. THE MESSAGE WILL BE RE-SENT AT A LATER TIME. ! CAUTION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Save all instructions and manuals For assistance please call: 1-877-557-2345 2 Date of Purchase Where Purchas…

Text truncated - open the document above for the full version.

NORTHWEST EMC, INC. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 December 3, 2003 Dear Application Examiner: On behalf of Wabi Inc, Northwest EMC Inc is submitting this application for the certification of Wabi’s WABI 006 transmitter, FCC ID:RGJBASE01. It operates in the 902 – 928 MHz band, and is seeking authorization under 47 CFR 15.249. The EUT can be configured with only one antenna and is used as a base unit transceiver. The remote unit transceiver that communicates with the EUT is used inside a toy and is also seeking certification at this time (see FCC ID: RGJREM01). The antenna is integral to the unit and satisfies the requirements of 47 CFR 15.203. The technical reports and exhibits demonstrate compliance with FCC rules 47 CFR 15.249. The receiver portion of the EUT’s transceiver has been tested and authorized through the verification process. Your efforts in reviewing this application are greatly appreciated. Best regards, Greg Kiemel, Director of Engineering Northwest EMC, Inc.

NORTHWEST EMC, INC. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 December 3, 2003 Dear Application Examiner: On behalf of Wabi Inc, Northwest EMC Inc is submitting this application for the certification of Wabi’s WABI 006 transmitter, FCC ID:RGJBASE01. It operates in the 902 – 928 MHz band, and is seeking authorization under 47 CFR 15.249. The EUT can be configured with only one antenna and is used as a base unit transceiver. The remote unit transceiver that communicates with the EUT is used inside a toy and is also seeking certification at this time (see FCC ID: RGJREM01). The antenna is integral to the unit and satisfies the requirements of 47 CFR 15.203. The technical reports and exhibits demonstrate compliance with FCC rules 47 CFR 15.249. The receiver portion of the EUT’s transceiver has been tested and authorized through the verification process. Your efforts in reviewing this application are greatly appreciated. Best regards, Greg Kiemel, Director of Engineering Northwest EMC, Inc.

Northwest EMC TCB Compliance Opinion Rev. 9/15/03 Umdt0005 Information about the Applicant Company Name Wabi, Inc. Grantee Dave Durran Address 2682 Bishop Dr., Suite 212 City, State, Zip San Ramon, CA 94583 Job Number UMDT0005 Model WABI 006 FCC ID RGJBASE01 Agent Northwest EMC Approval Type Original Equipment Class DXT Part 15, Low Power Transceiver, Rx Verified Rule Part 15.249 Overview See Cover Letter Recommendation All items have been resolved and completed to my satisfaction; therefore I recommend this application for approval. Signature 12/17/2003 Dean Ghizzone, TCB Committee Northwest EMC TCB Compliance Opinion Rev. 9/15/03 Umdt0005 Findings Opinions Specification Requirements Description 47 Cfr 2.1033(b)(3) Installation guide, operating instructions,user manual Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference User Manual.pdf Specification Requirements Description 47 Cfr 2.1033(b)(4) Operational description Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Operational Description.pdf Specification Requirements Description 47 Cfr 2.1033(b)(5) Frequency block diagram Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Block Diagram.pdf Specification Requirements Description 47 Cfr 2.1033(b)(6) Schematic diagram Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Schematics.pdf Specification Requirements Description 47 Cfr 2.1033(b)(7) Internal and external photos Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Internal Photos.pdf, External Photos.pdf Specification Requirements Description 47 Cfr 2.1033(b)(6) Conversions showing how the test results were achieved Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Schematics.pdf Northwest EMC TCB Compliance Opinion Rev. 9/15/03 Umdt0005 Specification Requirements Description Required Exhibit Test Setup Photo Exhibit Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Test Setup Photos.pdf Specification Requirements Description 47 Cfr 15.19 Labeling Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference User Manual.pdf, Label.pdf Specification Requirements Description 47 Cfr 15.21 Information for user Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference User Manual.pdf Specification Requirements Description 47 Cfr 15.33 Frequency range of tests Opinion The documentation does not meet the requirements. Discussion The test report indicates testing was only performed to 5 GHz Reference UMDT0005_Report.pdf Specification Requirements Description 47 Cfr 15.35 Measurement detectors Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference UMDT0005_Report.pdf Specification Requirements Description ANSI C63.4 EUT Ports All EUT ports populated,emissions maximized,Antenna height adjusted Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference UMDT0005_Report.pdf Specification Requirements Description 47 Cfr 15.203 Antenna Requirements Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference UMDT0005_Report.pdf Northwest EMC TCB Compliance Opinion Rev. 9/15/03 Umdt0005 Specification Requirements Description 47 Cfr 15.205 Restricted bands Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference UMDT0005_Report.pdf Specification Requirements Description 47 Cfr 15.207 Power line Conducted emissions Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference UMDT0005_Report.pdf Specification Requirements Description 47 Cfr 15.209 Spurious Emissions Opinion The documentation does not meet the requirements. Discussion The required frequency range has not been scanned Reference UMDT0005_Report.pdf Specification Requirements Description 47 Cfr 15.249 Field Strength of Fundamental Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference UMDT0005_Report.pdf Specification Requirements Description 47 Cfr 15.249 Field Strength of Spurious Emissions Opinion The documentation does not meet the requirements. Discussion The required frequency range has not been scanned. Reference UMDT0005_Report.pdf

NORTHWEST EMC, INC. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 December 3, 2003 Dear Application Examiner: On behalf of Wabi Inc, Northwest EMC Inc is submitting this application for the certification of Wabi’s WABI 006 transmitter, FCC ID:RGJBASE01. It operates in the 902 – 928 MHz band, and is seeking authorization under 47 CFR 15.249. The EUT can be configured with only one antenna and is used as a base unit transceiver. The remote unit transceiver that communicates with the EUT is used inside a toy and is also seeking certification at this time (see FCC ID: RGJREM01). The antenna is integral to the unit and satisfies the requirements of 47 CFR 15.203. The technical reports and exhibits demonstrate compliance with FCC rules 47 CFR 15.249. The receiver portion of the EUT’s transceiver has been tested and authorized through the verification process. Your efforts in reviewing this application are greatly appreciated. Best regards, Greg Kiemel, Director of Engineering Northwest EMC, Inc.

Northwest EMC TCB Compliance Opinion Rev. 9/15/03 Umdt0005 Information about the Applicant Company Name Wabi, Inc. Grantee Dave Durran Address 2682 Bishop Dr., Suite 212 City, State, Zip San Ramon, CA 94583 Job Number UMDT0005 Model WABI 006 FCC ID RGJBASE01 Agent Northwest EMC Approval Type Original Equipment Class DXT Part 15, Low Power Transceiver, Rx Verified Rule Part 15.249 Overview See Cover Letter Recommendation All items have been resolved and completed to my satisfaction; therefore I recommend this application for approval. Signature 12/17/2003 Dean Ghizzone, TCB Committee Northwest EMC TCB Compliance Opinion Rev. 9/15/03 Umdt0005 Findings Opinions Specification Requirements Description 47 Cfr 2.1033(b)(3) Installation guide, operating instructions,user manual Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference User Manual.pdf Specification Requirements Description 47 Cfr 2.1033(b)(4) Operational description Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Operational Description.pdf Specification Requirements Description 47 Cfr 2.1033(b)(5) Frequency block diagram Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Block Diagram.pdf Specification Requirements Description 47 Cfr 2.1033(b)(6) Schematic diagram Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Schematics.pdf Specification Requirements Description 47 Cfr 2.1033(b)(7) Internal and external photos Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Internal Photos.pdf, External Photos.pdf Specification Requirements Description 47 Cfr 2.1033(b)(6) Conversions showing how the test results were achieved Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Schematics.pdf Northwest EMC TCB Compliance Opinion Rev. 9/15/03 Umdt0005 Specification Requirements Description Required Exhibit Test Setup Photo Exhibit Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Test Setup Photos.pdf Specification Requirements Description 47 Cfr 15.19 Labeling Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference User Manual.pdf, Label.pdf Specification Requirements Description 47 Cfr 15.21 Information for user Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference User Manual.pdf Specification Requirements Description 47 Cfr 15.33 Frequency range of tests Opinion The documentation does not meet the requirements. Discussion The test report indicates testing was only performed to 5 GHz Reference UMDT0005_Report.pdf Specification Requirements Description 47 Cfr 15.35 Measurement detectors Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference UMDT0005_Report.pdf Specification Requirements Description ANSI C63.4 EUT Ports All EUT ports populated,emissions maximized,Antenna height adjusted Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference UMDT0005_Report.pdf Specification Requirements Description 47 Cfr 15.203 Antenna Requirements Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference UMDT0005_Report.pdf Northwest EMC TCB Compliance Opinion Rev. 9/15/03 Umdt0005 Specification Requirements Description 47 Cfr 15.205 Restricted bands Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference UMDT0005_Report.pdf Specification Requirements Description 47 Cfr 15.207 Power line Conducted emissions Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference UMDT0005_Report.pdf Specification Requirements Description 47 Cfr 15.209 Spurious Emissions Opinion The documentation does not meet the requirements. Discussion The required frequency range has not been scanned Reference UMDT0005_Report.pdf Specification Requirements Description 47 Cfr 15.249 Field Strength of Fundamental Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference UMDT0005_Report.pdf Specification Requirements Description 47 Cfr 15.249 Field Strength of Spurious Emissions Opinion The documentation does not meet the requirements. Discussion The required frequency range has not been scanned. Reference UMDT0005_Report.pdf

CONFIDENTIAL Do not disclose to unauthorized persons CONFIDENTIAL Wabi Inc., 2682 Bishop Drive, Ste. 212, San Ramon, CA 94583 Base Unit labels, placement SIZE DWG NO REV A 500-00009-00-1 1.0 SCALE 1 : 1 All dimensions in inches D. Durran SHEET 1 OF 1 DATE 25 Sept 2003 Active print area on product label Active print area on product label 0.050 typ. 2.900 1.900 1.800 0.050 typ. 0.400 R 0.050 R 0.050 Product label 500-00006-00 dimensions and placement on Base Unit Base Unit Serial # label 500-00009-00 dimensions and placement on product label Bar Code Area SN 1 2 3 4 5 6 7 8 9 0

CONFIDENTIAL Do not disclose to unauthorized persons CONFIDENTIAL Wabi Inc., 2682 Bishop Drive, Ste. 212, San Ramon, CA 94583 Base Unit labels, placement SIZE DWG NO REV A 500-00009-00-1 1.0 SCALE 1 : 1 All dimensions in inches D. Durran SHEET 1 OF 1 DATE 25 Sept 2003 Active print area on product label Active print area on product label 0.050 typ. 2.900 1.900 1.800 0.050 typ. 0.400 R 0.050 R 0.050 Product label 500-00006-00 dimensions and placement on Base Unit Base Unit Serial # label 500-00009-00 dimensions and placement on product label Bar Code Area SN 1 2 3 4 5 6 7 8 9 0

UMD Technology WABI 006 October 10, 2003 Report No. UMDT0004 Report Prepared By: 1-888-EMI-CERT © 2003 Northwest EMC, Inc 22975 NW Evergreen Parkway Suite 400 Hillsboro, Oregon 97124 Certificate of Test Issue Date: October 10, 2003 UMD Technology Model: WABI 006 Emissions Description Pass Fail FCC 15.209 Field Strength of Fundamental:2003 Radiated Emissions FCC 15.209(a):2000 Radiated Emissions FCC 15.207 AC Powerline Conducted Emissions:2003 Conducted Emissions Modifications made to the product See the Modifications section of this report Test Facility • The measurement facility used to collect the data is located at: Northwest EMC, Inc.; 22975 NW Evergreen Parkway, Suite 400; Hillsboro, OR 97124 Phone: (503) 844-4066 Fax: 844-3826 This site has been fully described in a report filed with and accepted by the FCC (Federal Communications Commission) and Industry Canada. Approved By: Ethan Schoonover, Sultan Lab Manager This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. Product compliance is the responsibility of the client, therefore the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. This Report may only be duplicated in its entirety. The results of this test pertain only to the sample(s) tested, the specific description is noted in each of the individual sections of the test report supporting this certificate of test. Northwest EMC Revision History Revision 05/05/03 Revision Number Description Date Page Number 00 None Northwest EMC Accreditations and Authorizations Revision 07/31/03 FCC: The Open Area Test Sites, and conducted measurement facilities, have been fully described in reports filed with the FCC and accepted by the FCC in letters maintained in our files. TCB: Northwest EMC has been accredited by ANSI to ISO/IEC Guide 65 as a product certifier. We have been designated by the FCC as a Telecommunications Certification Body (TCB). This allows Northwest EMC to certify transmitters to FCC specifications in accordance with 47 CFR 2.960 and 2.962. NVLAP: Accreditation has been granted to Northwest EMC, Inc. to perform the Electromagnetic Compatibility (EMC) tests described in the Scope of Accreditation. Assessment performed to ISO/IEC 17025. Certificate Number: 200629-0, Certificate Number: 200630-0. Australia/New Zealand: The National Association of Testing Authorities (NATA), Australia has been appointed by the ACA as an accreditation body to accredit test laboratories and competent bodies for EMC standards. Accredited test reports or assessments by competent bodies must carry the NATA logo. Test reports made by an overseas laboratory that has been accredited for the relevant standards by an overseas accreditation body that has a Mutual Recognition Agreement (MRA) with NATA are also accepted as technical grounds for product conformity. The report should be endorsed with the respective logo of the accreditation body. (NVLAP) TÜV Product Service: Included in TUV Product Service Group's Listing of Recognized Laboratories. It qualifies in connection with the TUV Certification after Recognition of Agent's Testing Program for the product categories and/or standards shown in TUV's current Listing of CARAT Laboratories available from TUV. A certificate was issued to represent that this laboratory continues to meet TUV's CARAT Program requirements. Certificate No. USA0302C TÜV Rheinland: Authorized to carryout EMC tests by order and under supervision of TÜV Rheinland. This authorization is based on "Conditions for EMC-Subcontractors" of November 1992. Northwest EMC Accreditations and Authorizations Revision 07/31/03 NEMKO: Assessed and accredited by NEMKO (Norwegian testing and certification body) for European emissions and immunity testing. As a result of NEMKO's laboratory assessment, they will accept test results from Northwest EMC, Inc. for product certification (Authorization No. ELA 119). Technology International: Assessed in accordance with ISO Guide 25 defining the general international requirements for the competence of calibration and testing laboratories and with ITI assessment criteria LACO196. Based upon that assessment Interference Technology International, Ltd., has granted approval for specifications implementing the EU Directive on EMC (89/336/EEC and amendments). The scope of the approval was provided on a Schedule of Assessment supplied with the certificate and is available upon request. Industry Canada: Accredited by Industry Canada for performance of radiated measurements. Our open area test sites comply with RSS 212, Issue 1 (Provisional). VCCI: Accepted as an Associate Member to the VCCI, Acceptance No. 564. Conducted and radiated measurement facilities have been registered in accordance with Regulations for Voluntary Control Measures, Article 8. (Registration Nos. - Evergreen: C-1071 and R-1025, Trails End: C-694 and R-677, Sultan: C-905, R-871 and R-1172, North Sioux City C-1246, R-1185 and R-1217) BSMI: Northwest EMC has been designated by NIST and validated by C- Taipei (BSMI) as a CAB to conduct tests as described in the APEC Mutual Recognition Agreement. License No.SL2-IN-E-1017. CAB: Designated by NIST and validated by the European Commission as a Conformity Assessment Body (CAB) to conduct tests and approve products to the EMC directive and transmitters to the R&TTE directive, as described in the U.S. - EU Mutual Recognition Agreement GOST: Northwest EMC, Inc. has been assessed and accredited by the Russian Certification bodies Certinform VNIINMASH, CERTINFO, SAMTES, and Federal CHEC, to perform EMC and Hygienic testing for Information Technology Products. As a result of their laboratory assessment, they will accept test results from Northwest EMC, Inc. for product certification Northwest EMC Scope Revision 07/31/03 NVLAP FCC NIST TUV PS TUV Rheinland Nemko Technology Inte…

Text truncated - open the document above for the full version.

Antenna Info The antenna used on a base is a ½ wave folded dipole printed directly on the PCB. The antenna is matched to maximize power transfer to and from the antenna for TX and RX modes respectively. No other antenna configuration can be connected to the unit.

UMD Technology WABI 006 October 10, 2003 Report No. UMDT0004 Report Prepared By: 1-888-EMI-CERT © 2003 Northwest EMC, Inc 22975 NW Evergreen Parkway Suite 400 Hillsboro, Oregon 97124 Certificate of Test Issue Date: October 10, 2003 UMD Technology Model: WABI 006 Emissions Description Pass Fail FCC 15.209 Field Strength of Fundamental:2003 Radiated Emissions FCC 15.209(a):2000 Radiated Emissions FCC 15.207 AC Powerline Conducted Emissions:2003 Conducted Emissions Modifications made to the product See the Modifications section of this report Test Facility • The measurement facility used to collect the data is located at: Northwest EMC, Inc.; 22975 NW Evergreen Parkway, Suite 400; Hillsboro, OR 97124 Phone: (503) 844-4066 Fax: 844-3826 This site has been fully described in a report filed with and accepted by the FCC (Federal Communications Commission) and Industry Canada. Approved By: Ethan Schoonover, Sultan Lab Manager This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. Product compliance is the responsibility of the client, therefore the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. This Report may only be duplicated in its entirety. The results of this test pertain only to the sample(s) tested, the specific description is noted in each of the individual sections of the test report supporting this certificate of test. Northwest EMC Revision History Revision 05/05/03 Revision Number Description Date Page Number 00 None Northwest EMC Accreditations and Authorizations Revision 07/31/03 FCC: The Open Area Test Sites, and conducted measurement facilities, have been fully described in reports filed with the FCC and accepted by the FCC in letters maintained in our files. TCB: Northwest EMC has been accredited by ANSI to ISO/IEC Guide 65 as a product certifier. We have been designated by the FCC as a Telecommunications Certification Body (TCB). This allows Northwest EMC to certify transmitters to FCC specifications in accordance with 47 CFR 2.960 and 2.962. NVLAP: Accreditation has been granted to Northwest EMC, Inc. to perform the Electromagnetic Compatibility (EMC) tests described in the Scope of Accreditation. Assessment performed to ISO/IEC 17025. Certificate Number: 200629-0, Certificate Number: 200630-0. Australia/New Zealand: The National Association of Testing Authorities (NATA), Australia has been appointed by the ACA as an accreditation body to accredit test laboratories and competent bodies for EMC standards. Accredited test reports or assessments by competent bodies must carry the NATA logo. Test reports made by an overseas laboratory that has been accredited for the relevant standards by an overseas accreditation body that has a Mutual Recognition Agreement (MRA) with NATA are also accepted as technical grounds for product conformity. The report should be endorsed with the respective logo of the accreditation body. (NVLAP) TÜV Product Service: Included in TUV Product Service Group's Listing of Recognized Laboratories. It qualifies in connection with the TUV Certification after Recognition of Agent's Testing Program for the product categories and/or standards shown in TUV's current Listing of CARAT Laboratories available from TUV. A certificate was issued to represent that this laboratory continues to meet TUV's CARAT Program requirements. Certificate No. USA0302C TÜV Rheinland: Authorized to carryout EMC tests by order and under supervision of TÜV Rheinland. This authorization is based on "Conditio…

Text truncated - open the document above for the full version.