RIN-ADP180BRFID Read/Write Device

14220 Plank St. - Ft Wayne, IN 46818 - Phone: 260-637-2739 - [email protected] – www.northernapex.com DP180B RFID Scanner Operations Manual NOTE: This unit is intended for use as a battery operated handheld unit. While it contains rechargeable batteries and a wall transformer for charging the batteries, once charging is complete, prior to turning the device on, the charging system is to be disconnected from the unit. In the event, that the charging system remains connected to the unit and not inserted into an AC outlet, interference with other devices in the area could occur. Charging – prior to first use unit should be charged Your DP180 contains a rechargeable battery pack that should provide approximately 500 or more charging cycles. Each charge will provide approximately 1500 reads or more, assuming the unit is not idle while powered- up between reads. Our tests are based on one read of a tag every 10 seconds. Charging takes 4 hours or less, depending on the capacity left in your battery pack. Charging should be accomplished using only the wall mount supply provided. Inserting the supply plug into the jack initiates charging and is indicated by illuminating the red light on the side of the unit near the charging jack. When the red light goes off, charging is complete. Note: When it comes time to replace your battery pack, only an authorized technician should do so. In addition, the RFID functionality is automatically turned off during charging such that the unit will not scan a tag while being charged. 14220 Plank St. - Ft Wayne, IN 46818 - Phone: 260-637-2739 - [email protected] – www.northernapex.com Normal Operation The DP180 rocker power switch has three positions. The middle position is OFF. The end rocker positions are both ON except one provides an additional backlight for the display in low light conditions. Upon first turning the unit ON, the LCD displays the message “Ready”. A tag present in the field during power-up will not be processed or displayed upon power-up. It is important to power the unit ON and observe the “Ready” message prior to introducing a tag into the field. If a tag is in the field prior to observing the ready message, it will have to be removed and re-introduced into the field in order to be read. Power Switch 14220 Plank St. - Ft Wayne, IN 46818 - Phone: 260-637-2739 - [email protected] – www.northernapex.com Tags The DP180, upon placing the head of the unit, containing the display and antenna, above a functional C210, C240 or ISO15693 tag, will extract the 16 digit hexadecimal, unique ID from the tag and display it on the LCD Screen. The DP180 can be configured for other alternative tag ID formats upon request. Consult an RFID sales representative for options. A tag ID is displayed on the LCD for five seconds prior to transitioning to another “Ready” message, alerting the user that it is ready to read a new tag or re-read the previous tag. If a tag is in the field prior to observing the ready message, it will have to be removed and re-introduced into the field. NOTE: This unit is intended for use as a battery operated handheld unit. While it contains rechargeable batteries and a wall transformer for charging the batteries, once charging is complete, prior to turning the device on, the charging system is to be disconnected from the unit. In the event, that the charging system remains connected to the unit and not inserted into an AC outlet, interference with other devices in the area could occur. Caution: According to FCC rules, any changes or modifications to this device not expressly approved by Northern Apex Corporation could void the user's authority to operate this device. 14220 Plank St. - Ft Wayne, IN 46818 - Phone: 260-637-2739 - [email protected] – www.northernapex.com Regulatory Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.

FCC 15.225 TransmitterFCC ID: RIN-ADP180B Northern Apex Corporation Exterior Views Product Top Product Front FCC 15.225 TransmitterFCC ID: RIN-ADP180B Northern Apex Corporation Product Rear Charging Port FCC 15.225 TransmitterFCC ID: RIN-ADP180B Northern Apex Corporation On-Off Switch

FCC 15.225 TransmitterFCC ID: RIN-ADP180B Northern Apex Corporation FCC Label artwork and location

FCC 15.225 TransmitterFCC ID: RIN-ADP180B Northern Apex Corporation Power Cord Label artwork and location

FCC 15.225 TransmitterFCC ID: RIN-ADP180B Northern Apex Corporation Interior Views Product Interior RFID PCB Top FCC 15.225 TransmitterFCC ID: RIN-ADP180B Northern Apex Corporation RFID Transmit PCB S002 PCB Top FCC 15.225 TransmitterFCC ID: RIN-ADP180B Northern Apex Corporation S002 PCB Bottom RFID Antenna PCB Top FCC 15.225 TransmitterFCC ID: RIN-ADP180B Northern Apex Corporation RFID Antenna PCB Bottom LCD PCB Top FCC 15.225 TransmitterFCC ID: RIN-ADP180B Northern Apex Corporation LCD PCB Bottom Internal Battery Pack

Amber Helm Development L.C. 92723 Michigan Hwy-152 Sister Lakes, MI 49047 A copy of this Report will be on file with AHD to:July, 2013Page1 of 33 EMC Test Report #1301729FXA Issued08/03/13 Regarding the FCC Part 15.225 testing RFID Transceiver Model DP180 FCC ID: RIN-ADP180B Category:15.225 RFID Device Judgments: FCC Part 15.225 / Class B Compliant* * when operated according to manufacturer instructions NVLAP LAB CODE 200129-0 Prepared for:Rick Raber Northern Apex Corp 14220 Plank St. Fort Wayne, Ind. 46818 Test Date(s):6/25/2013-7/13/2013 Report prepared by:Report reviewed by David J. Miller, NCEGordon L. Helm, NCE Data recorded by:_________________________ Gordon L. Helm, NCE Test Engineer, AHD Test report #1301729FXATested 6/25/13-7/13/13 FCC 15.225 testing for RFID Reader AHD EMC Lab, 92723 Michigan Hwy-152, Sister Lakes, MI 49047 (269) 429-8352 Page 2 of 33 Table of Contents STATEMENTS CONCERNING THIS REPORT .................................................................... 3 FCC REQUIRED USER STATEMENTS: ............................................................................................ 4 FCC Part 18 ISM Devices: ..................................................................................................... 4 FCC Part 15 Class A or B Digital Devices or Peripherals:................................................... 4 INDUSTRYCANADAREQUIRED USER STATEMENTS:..................................................................... 5 SUMMARY OF RESULTS ......................................................................................................... 7 Changes Made to Achieve Compliance: ................................................................................. 7 EUT DESCRIPTIONS ................................................................................................................. 8 SPECIFICATIONS:.......................................................................................................................... 8 EUT BLOCKDIAGRAM: ............................................................................................................... 8 EUT PICTURES............................................................................................................................ 9 EQUIPMENT TEST SETUP: ................................................................................................... 15 SUPPORTEQUIPMENT& CABLING............................................................................................. 15 SETUPPICTURES........................................................................................................................ 16 MEASUREMENT REPORT ..................................................................................................... 20 STANDARDSAPPLIED TOTEST................................................................................................... 20 EQUIPMENTCONFIGURATION.................................................................................................... 20 TESTMETHODOLOGY................................................................................................................ 20 Line Conducted:.................................................................................................................... 20 Radiated:............................................................................................................................... 20 Variance from Test Procedure: ............................................................................................ 21 TESTDATA................................................................................................................................ 22 Line Conducted:.................................................................................................................... 22 Radiated Spurious Emissions................................................................................................ 24 ENVIRONMENT........................................................................................................................... 26 APPENDIX A .............................................................................................................................. 27 MEASUREMENTPROCEDURES.................................................................................................... 27 Line Conducted ..................................................................................................................... 27 Radiated ................................................................................................................................ 28 MEASUREMENTFACILITIES& EQUIPMENT................................................................................ 29 Test Site ................................................................................................................................. 29 Measurement Equipment Used ............................................................................................. 29 CABLELOSS............................................................................................................................... 30 ANTENNAFACTORS................................................................................................................... 31 AHD ACCREDITATION............................................................................................................... 32 NARTE Seal........................................................................................................................ 33 Test report #1301729FXATested 6/25/13-7/13/13 FCC 15.225 testing for RFID Reader AHD EMC Lab, 92723 Michigan Hwy-152, Sister Lakes, MI 49047 (269) 429-8352 Page 3 of 33 Statements concerning this report NVLAP Accreditation: NVLAP Lab Code 200129-0 The scope of AHD accreditation are the test methods of: IEC/CISPR 22:Limits and methods measurement of radio disturbance characteristics of information technology equipment. FCC Method – 47 C…

Text truncated - open the document above for the full version.

FCC 15.225 TransmitterFCC ID: RIN-ADP180B Northern Apex Corporation Test Setup Views Conducted Setup Front View Conducted Setup Rear View FCC 15.225 TransmitterFCC ID: RIN-ADP180B Northern Apex Corporation Radiated Setup Front View Radiated Setup Rear View FCC 15.225 TransmitterFCC ID: RIN-ADP180B Northern Apex Corporation Low Frequency Radiated Loop Antenna View RFID Hot / Cold Chamber Test