RJ5LM17LCD Monitor

FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH ATTACHMENT E. - USER’S MANUAL CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated dangerous voltagewithin the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. W A R N I N G- To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. C A U T I O N- These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION WARNING & CAUTION Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use the attachments/accessories specified by the manufacturer. 12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. FCC (Federal communication commission) Information This product has been tested and found to comply with the limits for a TV Broadcast Receiver, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this product does cause or receive interference, which can be determined by turning product off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the TV antenna. Increase the separation between TV and other product. Connect TV into separate outlet from other product. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this product. z z z z ’ 1. Packing List 2. Safety Instructions 3. Features 4. Installation 4-1 Monitor Description 4-2 Connecting To The Computer 5. Monitor Adjustment 5-1 OSD Menu Description 5-2 Accessing the OSD Menu 5-3 OSD Menu Descripyion 6. Specifications 6-1 Monitor Specification 6-2 Video Input Connector 6-3 Resolutions Supported 7. Troubleshooting 8. Descriptions of Technical Terms Your new LM1730Ashould contain the following items: - LM1730A Monitor - AUDIO CABLE - 15pin D-SUB Signal Cable - Users Guide - Power Cord The power cord may be changed to accommodate electrical outlets worldwide. 1 Packing List LM1730A 15pin D-SUB Signal Cable AUDIO CABLE Power Cord Users Guide Do not place heavy objects on the power cord. Do not use your monitor near water. Turn off the monitor if there is thundering and lightening. Do not open your monitor. There are no user serviceable parts inside. Opening the case might expose you a hazardous shock. Do not place the monitor on an unstable table or stand. Do not insert small conductive objects into the monitor. They might cause a short or a hazardous shock. Adjust the height of monitor so that the top of the screen is below approximately 10 degrees. If reflected light makes it hard to see the screen, use a glare filter. Clean the LCD screen of the monitor surface with a lint-free, non-abrasive cloth. Avoid using any cleaner or solvent, such as benzene. Do not operate the monitor in a place that is extremly hot, humid or dusty. - Proper temperature: 5 ~ 35 - Humidity: 20 ~ 80 RH Safety Instructions 2 Screen: 17.0viewable XGA (1280*1024) resolution LCD module and space-saving slim design. Plug and Play Function: Implementation of DDC 1/2B(Display Data Channel 1/2B). Connected to the computer, the monitor automatically informs the host of its compatibility over DDC communication channel. VESA Wall Mount: This allows for the monitor to be mounted on the wall or an arm using any third party compliant device. OSD (On Screen Display) Menu Controls: This allow…

Text truncated - open the document above for the full version.

FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH ATTACHMENT C. - BLOCK DIAGRAM -

FCC ID : RJ5LM17 HYUNDAI C–TECH May 28, 2004 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT : Techsan I&C Co., Ltd. FCC ID: RJ5LM17 FCC Part 15 Subpart B Certification Gentlemen: Transmitted herewith, on behalf of Techsan Co I&C Co. Ltd. is an application for a FCC Part 15 Subpart B Certification of the following 17-inch LCD Monitor : FCC ID : RJ5LM17 Models No. : LM1730A, LM1735A, LM1740A, LM1745A Attached is the applicant’s Cover Letter, External/Internal Photos, Test Set-Up Photos, FCC ID & Label Location, User Manual, Block Diagram and Test Report. Should you have any questions or comments concerning the above, please contact the undersigned. KI SOO KIM ([email protected] , 82-31-639-8506) EMC MANAGER cc: Mr. IN SUNG SHIM ------- Quality Control Team / GENERAL MANAGER FCC ID : RJ5LM17 HYUNDAI C–TECH • Solution for EMI We, TECHSAN I & C CO., LTD. , announce that all modifications will be incorporated into each unit sold in the U.S. 1. Attach a ferrite core to the OSD signal interface cable 2. Attach a piece of copper foil by bridging it from the LCD panel frame to the OSD board 3. Attach a conductive gasket at the LCD’s rear panel (Please refer to next page of the photographs for Solution for EMI) TECHSAN I & C CO., LTD. 2004. 5. 28 Quality Control Team / GENERAL MANAGER [email protected] , 82-31-665-7190(210) IN SUNG SHIM FCC ID : RJ5LM17 HYUNDAI C–TECH 1. Apply a ferrite core to the OSD signal interface cable 2. Attach a piece of copper foil by bridging it from the LCD panel frame to the OSD board 3. Attach a conductive gasket at the LCD’s rear panel

FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 1/1 ATTACHMENT B. - EXTERNAL PHOTOS - FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 2/2 LM1730A FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 3/3 FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 4/4 FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 5/5 FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 6/6 LM1735A FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 7/7 FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 8/8 FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 9/9 FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 10/10 LM1740A FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 11/11 FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 12/12 FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 13/13 FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 14/14 LM1745A FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 15/15 FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 16/16 FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 17/17 FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 18/18 FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 19/19

FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 1/7 ATTACHMENT A. - ID LABEL INFORMATION AND LOCATION PHOTOS - FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 2/7 1.1 ID Label Information Following is a copy of the label that will be placed on the rear side of the cabinet. Figure 1.1 PRODUCT LABEL Both the FCC ID and compliance statement are included in the product label Product Name : 17" TFT LCD Monitor Product No. : LM1730A FCC ID : RJ5LM17 Rating : 100~250V, 1/0.5A, 50/60Hz Serial No. : THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Manufactrued by Techsan I&C Co., Ltd. http://www.techsan.co.kr Made in Korea Techsan For Indooor Use Only FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 3/7 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 4/7 1.2 Label Location Photos The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase.(Labeling requirements per 2.925) FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 5/7 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 6/7 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 7/7

FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 1/1 ATTACHMENT F-1. - INTERNAL PHOTOS - FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 2/2 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 3/3 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 4/4 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 5/5 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 6/6 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 7/7

FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 1/1 ATTACHMENT F-2. - INTERNAL PHOTOS - FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 2/2 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 3/3 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 4/4 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 5/5 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 6/6 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 7/7 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 8/8 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 9/9

FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 1/1 ATTACHMENT F-3. - INTERNAL PHOTOS - FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 2/2 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 3/3 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 4/4 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 5/5 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 6/6 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 7/7 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 8/8

HYUNDAI CALIBRATION & CERTIFICATION TECH. CO., LTD. Product Compliance Division, EMC Team SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI, KYOUNKI-DO, 467-701, KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 CERTIFICATION Rule Part(s): Equipment Class: Standard(s): EUT Type: Max. Resolution(s): Model(s): Port/Connector(s) LCD Panel This equipment has been shown to be in compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.4-2001 (Grant Notes: #19, #28). I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Report prepared by : Ki-Soo Kim Manager of EMC Tech. Part ▷▷ HYUNDAI CALIBRATION & CERTIFICATION TECH. CO., LTD. ◁◁◁ 1/ 20 RJ5LM17 LM1730A, LM1735A, LM1740A, LM1745A Manufacture; TECHSAN I & C CO., LTD. 436, MOGOK-DONG, PYEONGTAEK-SI, GYEOUNGGI-DO, KOREA TECHSAN I & C FRN : 009419888 Date of Issue : May 25, 2004 Test Report No.: HCT-F04-0503 Test Site: HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. HCT FRN : 0005-8664-21 FCC ID : MODEL(S) : Part 15 & 2; ET Docket 95-19 FCC Class B Peripheral Device (JBP) FCC Class B: 1998 (CISPR 22) 17” LCD Monitor 1280 X 1024 (@80KHz/75Hz) LM1730A, LM1735A, LM1740A, LM1745A 15-pin D-sub VGA connector, AUDIO IN. SAMSUNG Electronics (LTM170EU-L11) FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 2/20 TABLE OF CONTENTS PAGE REPORT COVER 1 TABLE OF CONTENTS 2 1.1 SCOPE 3 2.1 INTRODUCTION (SITE DESCRIPTION) 4 3.1 PRODUCTION INFORMATION 5-6 4.1 PRELIMINARY TESTS 7 5.1 DESCRIPTION OF TESTS 8-9 6.1 LIST OF SUPPORT EQUIPMENT 10-11 7.1 TEST DATA (CONDUCTED) 12-15 8.1 TEST DATA (RADIATED) 16 9.1 SAMPLE CALCULATIONS 17 10.1 TEST EQUIPMENT 18 11.1 TEST SOFTWARE USED 19 12.1 CONCLUSION 20 ATTACHMENT A: FCC ID LABEL & LOCATION ATTACHMENT B: EXTERNAL PHOTOGRAPHS ATTACHMENT C: BLOCK DIAGRAM(S) ATTACHMENT D: TEST SETUP PHOTOGRAPHS ATTACHMENT E: USER’S MANUAL ATTACHMENT F-1: INTERNAL PHOTOGRAPHS ATTACHMENT F-2: INTERNAL PHOTOGRAPHS ATTACHMENT F-3: INTERNAL PHOTOGRAPHS FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 3/20 MEASUREMENT REPORT 1.1 Scope Measurement and determination of electromagnetic emissions (EME) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission. • FCC ID : RJ5LM17 • Equipment Class: FCC Class B Peripheral Device (JBP) • EUT Type: 17” LCD MONITOR • Model(s): LM1730A, LM1735A, LM1740A, LM1745A • LCD Panel: SAMSUNG Electronics (LTM170EU-L11) • Max. Resolution: 1280 X 1024 (@80KHz/75Hz) • Frequency Range : V-Sync: 55.0Hz – 75.0Hz , H-Sync: 30kHz – 80kHz • Cable(s): Shielded D-Sub (with ferrite on both ends) • Power Cord: Unshielded • Rule Part(s): FCC Part 15 Subpart B • Test Procedure(s): ANSI C63.4 (2001) • Dates of Tests: April 26, 2004 ~ May 12, 2004 • Place of Tests: 254-1,MAEKOK-RI,HOBUP-MYUN,ICHON-SI,KYOUNGKI-DO,467-701,KOREA Applicant Name: Address: TECHSAN I & C 436, MOGOK-DONG, PYEONGTAEK-SI, GYEOUNGGI-DO, KOREA FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 4/20 2.1 INTRODUCTION The measurement procedure described in American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9kHz to 40GHz (ANSIC63.4-2001) was used in determining radiated and conducted emissions emanating from TECHSAN I & C CO.,LTD. 17-inch LCD Monitor FCC ID: RJ5LM17 The open area test site and conducted measurement facility used to collect the radiated data are located at the 254-1, MAEKOK-RI,HOBUP-MYUN,ICHON-SI,KYOUNGKI-DO, 467-701,KOREA. The site is constructed in conformance with the requirements of ANSI C63.4and CISPR Publication 22. Detailed description of test facility was submitted to the Commission and accepted dated July 23,2003 (Confirmation Number: EA90661) FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 5/20 3.1 PRODUCT INFORMATION 3.2 Equipment Description Equipment Under Test (EUT) is the TECHSAN I & C CO.,Ltd. ( Models : LM1730A, LM1735A, LM1740A, LM1745A ) 17-inch LCD Monitor FCC ID: : RJ5LM17 Maximum Resolution(s): 1280 X 1024 (@80KHz/75Hz) Frequency Range(s): H-Sync: 30kHz – 80kHz V-Sync: 55.0Hz – 75.0 Hz Pixel Pitch: 0.264mm Power Supply: AC 100-240V, 1.0A Power Cord: Unshielded AC power cord Port(s)/Input Connector(s): 15-pin D-sub VGA connector, AUDIO IN. Cable(s): Shielded D-Sub (with ferrite on both ends) Dimensions (W × H × D): 410 X 403 X 200mm Weight (Net) : 7.1 (5.9)Kg unpacked EMI Suppression Devices: 1. Apply a ferrite core to the OSD signal interface cable FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 6/20 2. Attach a piece of copper foil by bridging it from the LCD panel frame to the OSD board 3. Attach a conductive gasket at the LCD’s rear panel FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 7/20 4.1 PRELIMINARY TESTS 4.1 AC Power line Conducted Emission Tests During Preliminary Tests, the following models were investigated Model name Conducted emission Level (Margin) The worst model LM1730A 16.250MHz ; 39.80dBuV (20.2 dB) LM1735A 16.260MHz ; 46.10dBuV (13.9 dB) X LM1740A 16.200MHz ; 45.10dBuV (14.9 dB) LM1745A 16.130MHz ; 44.80dBuV (15.2 dB) 4.2 Radiated Emission Tests During Preliminary Tests, the following models were investigated Model name Radiated emission Level (Margin) The worst model LM1730A 291.9MHz ; 32.1dBuV/m (4.9 dB) LM1735A 144.4MHz ; 26.0dBuV/m (4.0 dB) X LM1740A 175.7MHz ; 25.5dBuV/m (4.5 dB) LM1745A 162.3MHz ; 25.1dBuV/m (4.9 dB) Tested by Byung-Ki Ham / Engineer Date : April 26, 2004 ~ May 10, 2004 FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 8/20 5.1 Description of…

Text truncated - open the document above for the full version.

FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 1/1 ATTACHMENT D. - TEST SETUP PHOTOS- FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 2/2 1.CONDUCTED AND RADIATED MEASUREMENT PHOTOS [CONDUCTED MEASUREMENT PHOTO] LM1730A LM1740A LM1745A FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 3/3 LM1735A FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 4/4 [RADIATED MEASUREMENT PHOTO] LM1730A LM1740A LM1745A FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 5/5 LM1735A FCC ID : : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH 6/6