RKB-8007-1SE-8007 15 Channel 2.4GHz PS Wireless Controller

Titan Concepts™ is a trademark of China Delta Group Limited. Distributed by Goodbetterbest UK Ltd. B16 9DF. [email protected] PlayStation®2, PlayStation® & PS one™ are registered trademark of Sony Computer Entertainment Inc. This product is not designed, manufactured, sponsored, endorsed or approved by Sony Computer Entertainment Inc. Titan 2.4GHz Wireless Controller Actual size: 210 X 297 mm Finish size: 99 X 105 mm Col: black on white Mat'l; 80 gsm woodfree paper Date: 2004/04/22 2.4GHz CONTROLLER for use with PLAYSTATION®2, PSONE™ and PLAYSTATION® Thank you for purchasing the Titan Concepts 2.4GHz Controller for use with the PlayStation®2/PlayStation®/PS one™ video game system. The 2.4GHz Wireless Controller puts you in control of your game system with all the comfort of a remote controller combined with the reliability of cutting-edge wireless technology. With its "unblockable" RF signal transceivers, the 2.4GHz Controller lets you comfortably play from up to 40’ from your PlayStation®2 /PlayStation®/PS one™ while maintaining complete control over your gaming experience. This user guide will help you understand how to use your 2.4GHz Controller and get the most from the features it has to offer. SET-UP 1. Turn the PlayStation®2 power OFF. 2. Remove the battery cover of 2.4GHz Controller. 3. Insert Four (4) AAA batteries. (not included). 4. Replace the battery cover. 5. Insert the Receiver Dongle into the controller port on the game console. Always insert to Player 1 Slot for single player gameplay. 6. Place game disk into the PlayStation®2. 7. Turn on the power to your game console and begin play. FEATURE Receiver Dongle: Used to transmit and receive data from the controller to the game console. Directional Pad: The D-pad controls the direction in which the character moves. This is the primary directional control while in Digital Mode. Analogue Sticks: The two Analogue sticks each control two axis (X- and Y-axis). Different software titles will allow you to modify the way that the Analogueue sticks react in the games. While in Analogue Mode, any software title that is Vibration Function Compatible will cause the 2.4GHz Controller to vibrate at different levels, depending on actions taking place from within the game (e.g., being hit, crashing, or shooting). ANALOGUE ACTION BUTTON CHANNEL SELECTOR RECEIVER DONGLE 8 WAY DIRECTIONAL PAD ANALOGUE STICK Shoulder Buttons (L1, L2, R1, and R2): These are action buttons and their specific functions depend on the software being used. Action Buttons ( , , , ) : These buttons are used to perform various actions, depending on the software. For more details, see the software instruction manual. Start Button: This button is generally used to make selections in the menus and for pausing the game. For more details, see the software instruction manual. Select Button: This is a standard button that allows you to do various things, depending on the software. For more details, see the software instruction manual. Mode Button: The 2.4GHz Controller has two different modes; Analogue Controller Mode, and Digital Mode. Analogue Mode - RED Light On This is the standard “Dual Shock™” mode. Some games will only vibrate if the controller is in Analogue Controller mode. Digital Mode - Light OFF This is the original PlayStation® controller mode. This is the default control mode. Power On/Off Switch The “Power” switch allows you to switch the power On or Off. Player Channel Switch: A, B Group & 1-4 Player The 2.4GHz Controller provides 8 Player Channel for maximum 8 players gameplay, different player can select different RF Channel to avoid any interference between each player. A & B Group have 4 channels, please select Group (A or B) and then select the Player channel (1 to 4) to select your desired channel, do the same on the paired Receiver Dongle. Additionally, another RF source may cause interference. You can switch different Player Channel to avoid the interference. Vibration ON/Off By holding the “Mode” Button for more than 4 second, you can switch off the Vibration motor, LED will blink then release the “Mode” button. Doing the same procedure, you can reactivate the Vibration function again. CAUTIONS • IMPORTANT! Before using this product read all accompanying information and your game system’s instruction manual for safety, health and other information. • Use this unit only as intended. • To prevent fire or shock hazard, do not expose this unit to rain or moisture. • To avoid electrical shock, do not disassemble. Refer servicing to qualified personnel only. • Never push objects of any kind, other than authorized items, into the product as they may touch dangerous voltage points or short out parts that could result in fire or electrical shock. • This unit should be operated only from the power source indicated on the unit. If you are not sure of the type of electrical power supplied to your home, contact your local power company. • Do not overload wall outlets or extension cords beyond their capacity, since doing so can cause fire or electric shock. • Stop using this unit immediately if you begin to feel tired or if you experience discomfort or pain in your hands and/or arms while operating the unit. If the condition persists, consult a doctor. • Do not attempt to operate the unit in any way except with your hands. Do not bring the unit in contact with your head, face, or near the bones of any other part of your body. • The vibration function of this unit can aggravate injuries. Switch off or do not use the vibration function of the unit if you have any ailment of the bones or joints of your hands or arms. • Avoid prolonged use of this unit. Take breaks every 30 minutes. TROUBLESHOOTING Problem: The 2.4GHz Controller does not respond. Solution: Make sure the battery is fully charged. Solution: Select different Player Channel Solution: Make sure the receiver dongle is fully plugged in to the PlayStation® game console. Problem: The 2.4GHz Controller…

Text truncated - open the document above for the full version.

Page1 of 2 Proprietary Information Not To Be Disclosed Without Written Authorization From AVC © Addvalue Technologies Ltd, all rights reserved SINGP Base Block Diagram RF Transceiver MCU PS2 16MHz TX/RX : 2.402GHz ~ 2.480GHZ CH SelectBand Select

PAGE 1 OF 2 FACSIMILE To: MET Laboratories, Inc. Date: 2002-01-05 Attn. : Mr. Chris Harvey E-mail: [email protected] From: Alice Wong [EED Department] E-mail: [email protected] CC: Kitty Choy [EED Department] FCC ID: RKB-8007-1 Subject : Apply one FCC Certificate NOT CONFIDENTIALITY Applicant: Sinar Electronics Ltd. Address: Room 608, Shui Hing Centre, 13 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong. FRN: 0009-7241-39 Grantee Code: RKB FCC ID: RKB-8007-1 Product: 2.4G PS Wireless Controller Model: SE-8007 If you have any question, please free feel to contact me. Please see attached sheet and following! For and on behalf of The Hong Kong Standards & Testing Centre Ltd.: Alice Wong EED Dept. Hong Kong Standards and Testing Centre 10 Dai Wang Street, Taipo Industrial Estate, NT, Hong Kong Tel : (852) 2666 1888 Fax : (852) 2665 0848 Email : [email protected] PAGE 2 OF 2 Item Description 1 Service agreement 2 Purchase Order 3 Letter of appointment 4 Letter of attestation 5 Circuit Description 6 Circuit diagram 7 Block diagram 8 PCB Layout 9 Parts List 10 User’s manual 11 FCC ID label 12 Label Location 13 Internal Photo 14 External Photo 15 Setup Photo 16 Report and Equipment list 17 Bandwidth

13 09 04 Sinar Electronics Ltd. Room 608, Shui Hing Centre, 13 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong Sinar Electronics Ltd. Sinar Electronics Ltd.

PHOTOGRAPH OF THE PRODUCT FRONT VIEW OF THE PRODUCT REAR VIEW OF THE PRODUCT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: RKB-8007-1 Made in China

LABEL LOCATION BOTTOM VIEW OF THE DEVICE WITH FCC ID LABEL FCC Label

PHOTOGRAPH OF THE PRODUCT INNER CIRCUIT TOP VIEW INNER CIRCUIT BOTTOM VIEW

FRM-PB-00-042 REV 3 A B C D 12345678 12345678 A B C D Proprietary Information Not To Be Disclosed Without Written Authorization From AVC. c Addvalue Technologies Ltd, all rights reserved REV : SHEETOF PROJECT TITLEDRAWN BY SIZE : A3 DESCRIPTION DATE: FILE:F:\Sakura2 Singp\Dev\Base\R012r1\Sa2sndbs012r1.ddb - SCH\Sa2sndbs012r1.sch 5 MICHELLE POH 08 OCT 200311 SAKURA 2 SINGP0.12 BASE DEV BOARD SCHEMATIC 1 F1 1 F2 NOTES: 1) ALL RESISTORS & CAPACITORS USED ARE SMD0402 UNLESS OTHERWISE SPECIFIED. FIDUCIAL POINTS 3V T_DATA/DIO REF_CLK/DCLK S_DATA/SDA S_CLK DCXCTR S_EN ANT_OUT 1 2 3 4 5 6 7 8 9 HDR201 PS2 CON TXD RXD DTR SCK DSR TXD SCK DSR DTR RXD 3V5 C240 0.1uF C236 470uF 6V3 C237 470uF 6V3 C238 0.1uF 3V TP205TP206TP204 C231 0.1uF C230 DNA[A] VCC 12 D201 1N5819 C239 4u7F 6V3 (5V) R_DATA/DIO TP223 TP224 TP225TP226 TP227 TP228 TP229 TP230 TP231 CHP_OUT 1 CLK 2 R_D 3 T_D 4 REF_CLK 5 S_CLK 6 S_D 7 S_EN 8 DCXCTR 9 GND 10 ANT 11 GND 12 3V 13 RF AVC_RF_MOD1 C221 DNA C222 DNA L201 DNA[0603] ANT ANTENNA TXD R217 10K DTR R216 10K DSR RXDSCK T_DATA/DIO R_DATA/DIO VCCS_CLK S_EN C213 0.1uF C206 6p8F S_EN S_CLK SCK T_DATA/DIO R_DATA/DIO TXD DTR RXD DSR C201 0.1uF R201 100K VCC MCLR/VPP 1 RA0/AN0 2 RA1/AN1 3 RA2/AN2 4 RA3/AN3/VREF 5 RA4/TOCK1 6 RA5/SS/AN4 7 VSS 8 OSC1/CLKIN 9 OSC2/CLKOUT 10 RC0/T1OSO/T1CK1 11 RC1/T1OSI/CCP2 12 RC2/CCP1 13 RC3/SCK/SCL 14 RC4/SDI/SDA 15 RC5/SDO 16 RC6/TX/CK 17 RC7/RX/DT 18 VSS 19 VDD 20 RB0/INT 21 RB1 22 RB2 23 RB3 24 RB4 25 RB5 26 RB6 27 RB7 28 U201 PIC16C63A(SSOP28) VCC C209 DNA S_DATA/SDA R209 1M[0603] X201 16MHz C205 22pF R225 10[0603] TP202 S_DATA/SDA TP203 Q202 MMBT3904 Q201 MMBT3904 Q203 MMBT3904 R213 10K DCXCTR DCXCTR REF_CLK/DCLK C211 39pF 3V (SOT353) *U202 PLACE NEAR X201 1 2 GND 3 Y 4 VCC 5 U202 MC74VHC1G00DFT2 CV201 3-10pF C210 0.1uF R215 1K R210 150 R212 1K C207 270pF C208 0.1uF TP201 C212 DNA C202DNAC203DNAC204DNA R211 DNA REF_CLK/DCLK R214 DNA OSC1 OSC2 D202 BZX84C3V0LT1 R219 2K R220 4K7 R2064K7R2074K7R2084K7 R2032K R204 2K R205 2K R224100KR223100KR222100KR221100K CH1 CH2 CH3 CH4 R202 100K CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 R218 6K8 DS201 LED VCC 1 2 3 45 6 7 8 SW201 CH SEL 1 23 4 SW202 BAND A/B (TZ03F) (1,2,3,4) (A) (B) VSS 1 OUT 2 LX 3 VR201 AT1301 C232 100uF 6V3 L203 120uH(1812) C234 0.1uF C233 DNA[A] C235 4u7F(0805) L202 330uH SHDN 1 GND 2 IN 3 OUT 4 SET 5 VR202 G913D VOUT 1 VIN 2 GND 3 VR203 DNA(TK71530AS) 1 3V5PAD 3V5

Sinar Electronics Limited Rm 608, Shui Hing Center, 13 Sheung Yuet Road, Kowloon Bay, Kowloon, HK Tel : 852-2753 8072 Fax : 852-2753 8073 PROJECT :2.4G PS Wireless controller (Controller) PROJECT #: VER.:3.2 DATE:Feb 24th , 04 Preliminary Part List MATERIAL / ITEMCATEGORYDESCRIPTIONBRAND Electronics Parts PCB,MAIN BASE 68X40X1.0 double side Receiver box CAP, EL, Low Profile (5mm) EL 4u7F ±20% 16V (5X5) 2.5mm CAP, EL, Low Profile (5mm) EL 100uF ±20% 6.3V (4x7) 2.5mm CAP, EL, Low Profile (5mm) EL 470uF ±20% 6.3V (6.3X11) 2.5mm CAP SMT 0603 39pF +/-5% 50V NPO CAP SMT 0603 6.8pF +/-0.5pF 50V(NPO) CAP SMT 0603 270pF +/-5% 50V NPO CAP SMT 0603 22pF +/-5% 50V NPO CAP SMT 0603 0.1uF -20% +80% 16V Y5V CAP SMT 0603 1pF +/- 0.5% 50 v NPO CAP SMT 0805 4.7uF +/-20% 16V TRIMMER CAP, LEADED NPO 3.0pFMIN -10pF MAX Willas/Morata DIODE, BZX84C3V0LT1 (SOT-23) mobicon DIODE, SCHOTTKY 1A 40V LEADED SRT14 PIC16C63A (package: SSOP 28) Microchip IC MC74VHC1G00DFT2(SOT-353) mobicon RF Module LED RED COLOR 3.0MM (Leaded) 2.5mm Pitch CRYSTAL, 16MHz HC-49/US leaded (10ppm; 12PF) 晶科興 RES SMT 0603 1K ohm +/-5% 1/16W RES SMT 0603 10 ohm +/-5% 1/16W RES SMT 0603 1M ohm +/-5% 1/16W RES SMT 0603 10K ohm +/-5% 1/16W RES SMT 0603 100K ohm +/-5% 1/16W RES SMT 0603 6.8K ohm +/-5% 1/16W RES SMT 0603 2K ohm +/-5% 1/16W RES SMT 0603 4.7K ohm +/-5% 1/16W RES SMT 0603 150 ohm +/-5% 1/16W TRANS BJT NPN G.P. SMT MMBT3904 SOT-23 CONVERTER, DC-DC AT1301 5V DNA VOLTAGE REGULATOR G913D (SOT23-5) 3.0V GMT TaiWan IND LEADED 3.3mH IND SMD (1812) 1mH IND SMD Multilayer (0603) 2.2 nH +/- 0.3 nH PS cable, 8 pin with ferrite core length 330mm

香 港 標 準 及 檢 定 中 心 Hong Kong Standards and Testing Centre Date : 2004-07-06 TEST REPORT Page 1 of 22 No. : HM150647 This report shall not be reproduced unless with prior written approval from the Hong Kong Standards and Testing Centre. 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). Applicant: Sinar Electronics Ltd. Room 608, Shui Hing Centre, 13 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong. Description of Samples: Model name: 2.4G PS Wireless Controller Model no.: SE-8007 Brand name: Titan FCC ID: RKB-8007-1 Date Samples Received: 2004-02-06 Date Tested: 2004-03-01 to 2004-04-02 Investigation Requested: FCC Part 15 Subpart C Conclusions: The submitted product COMPLIED with the requirements of Federal Communications Commission [FCC] Rules and Regulations Part 15. The tests were performed in accordance with the standards described above and on Section 2.2 in this Test Report. Remarks: ---- K C Lee, EMC for Chief Executive 香 港 標 準 及 檢 定 中 心 Hong Kong Standards and Testing Centre Date : 2004-07-06 TEST REPORT Page 2 of 22 No. : HM150647 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). CONTENT: Cover Page 1 of 22 Content Page 2-3 of 22 1.0 General Details 1.1 Test Laboratory Page 4 of 22 1.2 Applicant Details Page 4 of 22 Applicant HKSTC Code Number for Applicant Manufacturer 1.3 Equipment Under Test [EUT] Page 5 of 22 Description of EUT operation 1.4 Date of Order Page 5 of 22 1.5 Submitted Samples Page 5 of 22 1.6 Test Duration Page 5 of 22 1.7 Country of Origin Page 5 of 22 1.8 Additional Information of EUT Page 6 of 22 2.0 Technical Details 2.1 Investigations Requested Page 7 of 22 2.2 Test Standards and Results Summary Page 7 of 22 3.0 Test Results 3.1 Emission Page 8-15 of 22 3.2 Bandwidth Measurement Page 16-17 of 22 香 港 標 準 及 檢 定 中 心 Hong Kong Standards and Testing Centre Date : 2004-07-06 TEST REPORT Page 3 of 22 No. : HM150647 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). Appendix A List of Measurement Equipment Page 18 of 22 Appendix B Duty Cycle Correction During 100 msec Page 19-20 of 22 Appendix C Photographs Page 21-22 of 22 香 港 標 準 及 檢 定 中 心 Hong Kong Standards and Testing Centre Date : 2004-07-06 TEST REPORT Page 4 of 22 No. : HM150647 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). 1.0 General Details 1.1 Test Laboratory The Hong Kong Standards and Testing Centre Ltd. EMC Laboratory 10 Dai Wang Street, Taipo Industrial Estate New Territories, Hong Kong 1.2 Applicant Details Applicant Sinar Electronics Limited. Room 608, Shui Hing Centre, 13 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong. HKSTC Code Number for Applicant SIE007 Manufacturer Sinar Electronics Limited. Room 608, Shui Hing Centre, 13 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong. 香 港 標 準 及 檢 定 中 心 Hong Kong Standards and Testing Centre Date : 2004-07-06 TEST REPORT Page 5 of 22 No. : HM150647 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). 1.3 Equipment Under Test [EUT] Description of Sample Model Name: 2.4G PS Wireless Controller Manufacturer: Sinar Electronics Limited. Brand Name: Titan Model Number: SE-8007 Input Voltage: The product draws power from the signal port of the console. 1.3.1 Description of EUT Operation The Equipment Under Test (EUT) is a Sinar Electronics Limited, 2.4GHz PS Wireless Controller. Modulation by IC. and type is pulse modulation. 1.4 Date of Order 2004-02-06 1.5 Submitted Sample(s): 1 Sample per model 1.6 Test Duration 2004-03-01 to 2004-04-02 1.7 Country of Origin China 香 港 標 準 及 檢 定 中 心 Hong Kong Standards and Testing Centre Date : 2004-07-06 TEST REPORT Page 6 of 22 No. : HM150647 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). 1.8 Additional Information of EUT Submitted Not Available User Manual Part List Circuit Diagram Printed Circuit Board [PCB] Layout Block diagram FCC ID Label 香 港 標 準 及 檢 定 中 心 Hong Kong Standards and Testing Centre Date : 2004-07-06 TEST REPORT Page 7 of 22 No. : HM150647 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). 2.0 Technical Details 2.1 Inv…

Text truncated - open the document above for the full version.

香 港 標 準 及 檢 定 中 心 Hong Kong Standards and Testing Centre Date : 2004-07-06 TEST REPORT Page 1 of 22 No. : HM150647 This report shall not be reproduced unless with prior written approval from the Hong Kong Standards and Testing Centre. 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). Applicant: Sinar Electronics Ltd. Room 608, Shui Hing Centre, 13 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong. Description of Samples: Model name: 2.4G PS Wireless Controller Model no.: SE-8007 Brand name: Titan FCC ID: RKB-8007-1 Date Samples Received: 2004-02-06 Date Tested: 2004-03-01 to 2004-04-02 Investigation Requested: FCC Part 15 Subpart C Conclusions: The submitted product COMPLIED with the requirements of Federal Communications Commission [FCC] Rules and Regulations Part 15. The tests were performed in accordance with the standards described above and on Section 2.2 in this Test Report. Remarks: ---- K C Lee, EMC for Chief Executive 香 港 標 準 及 檢 定 中 心 Hong Kong Standards and Testing Centre Date : 2004-07-06 TEST REPORT Page 2 of 22 No. : HM150647 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). CONTENT: Cover Page 1 of 22 Content Page 2-3 of 22 1.0 General Details 1.1 Test Laboratory Page 4 of 22 1.2 Applicant Details Page 4 of 22 Applicant HKSTC Code Number for Applicant Manufacturer 1.3 Equipment Under Test [EUT] Page 5 of 22 Description of EUT operation 1.4 Date of Order Page 5 of 22 1.5 Submitted Samples Page 5 of 22 1.6 Test Duration Page 5 of 22 1.7 Country of Origin Page 5 of 22 1.8 Additional Information of EUT Page 6 of 22 2.0 Technical Details 2.1 Investigations Requested Page 7 of 22 2.2 Test Standards and Results Summary Page 7 of 22 3.0 Test Results 3.1 Emission Page 8-15 of 22 3.2 Bandwidth Measurement Page 16-17 of 22 香 港 標 準 及 檢 定 中 心 Hong Kong Standards and Testing Centre Date : 2004-07-06 TEST REPORT Page 3 of 22 No. : HM150647 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). Appendix A List of Measurement Equipment Page 18 of 22 Appendix B Duty Cycle Correction During 100 msec Page 19-20 of 22 Appendix C Photographs Page 21-22 of 22 香 港 標 準 及 檢 定 中 心 Hong Kong Standards and Testing Centre Date : 2004-07-06 TEST REPORT Page 4 of 22 No. : HM150647 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). 1.0 General Details 1.1 Test Laboratory The Hong Kong Standards and Testing Centre Ltd. EMC Laboratory 10 Dai Wang Street, Taipo Industrial Estate New Territories, Hong Kong 1.2 Applicant Details Applicant Sinar Electronics Limited. Room 608, Shui Hing Centre, 13 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong. HKSTC Code Number for Applicant SIE007 Manufacturer Sinar Electronics Limited. Room 608, Shui Hing Centre, 13 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong. 香 港 標 準 及 檢 定 中 心 Hong Kong Standards and Testing Centre Date : 2004-07-06 TEST REPORT Page 5 of 22 No. : HM150647 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). 1.3 Equipment Under Test [EUT] Description of Sample Model Name: 2.4G PS Wireless Controller Manufacturer: Sinar Electronics Limited. Brand Name: Titan Model Number: SE-8007 Input Voltage: The product draws power from the signal port of the console. 1.3.1 Description of EUT Operation The Equipment Under Test (EUT) is a Sinar Electronics Limited, 2.4GHz PS Wireless Controller. Modulation by IC. and type is pulse modulation. 1.4 Date of Order 2004-02-06 1.5 Submitted Sample(s): 1 Sample per model 1.6 Test Duration 2004-03-01 to 2004-04-02 1.7 Country of Origin China 香 港 標 準 及 檢 定 中 心 Hong Kong Standards and Testing Centre Date : 2004-07-06 TEST REPORT Page 6 of 22 No. : HM150647 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). 1.8 Additional Information of EUT Submitted Not Available User Manual Part List Circuit Diagram Printed Circuit Board [PCB] Layout Block diagram FCC ID Label 香 港 標 準 及 檢 定 中 心 Hong Kong Standards and Testing Centre Date : 2004-07-06 TEST REPORT Page 7 of 22 No. : HM150647 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). 2.0 Technical Details 2.1 Inv…

Text truncated - open the document above for the full version.

TEST SET UP PHOTOGRAPH OF THE PRODUCT MEASUREMENT OF RADIATED EMISSION TEST SET UP MEASUREMENT OF CONDUCTED EMISSION TEST SET UP