RNF-BTLM200WiFi AP

Bitlomat 200 User Manual 1 2 Contents 1 Operating Modes 3 1.1 Base Station.......................................................................................................... 3 1.2 CPE......................................................................................................................... 4 1.3 Home Router......................................................................................................... 5 1.4 Point-to-Point Link.................................................................................................6 2 Bitlomat Default Settings 7 3 Dashboard 8 4 Settings Menu 10 4.1 Base Station Settings.................................................................................. 11 4.2 CPE Settings.......................................................................................................... 15 4.3 Home Router Settings......................................................................................... 18 4.4 Point-to-Point Link Settings................................................................................ 22 5 Services 27 5.1 SSH......................................................................................................................... 27 5.2 SHAPER.................................................................................................................. 28 5.3 MAC ACL................................................................................................................ 28 5.4 NAT and Port Forwarding.................................................................................... 29 5.5 ROUTES.................................................................................................................. 29 5.6 FIREWALL............................................................................................................... 30 5.7 DDNS...................................................................................................................... 31 5.8 NTP......................................................................................................................... 32 5.9 SNMP..................................................................................................................... 33 6 Tools 42 6.1 PING....................................................................................................................... 34 6.2 TRACE.................................................................................................................... 34 6.3 IPERF...................................................................................................................... 35 6.4 AP SCAN................................................................................................................. 35 3 Bitlomat-200 User Manual 1. Operating Modes  Base Station  CPE  Home Router  Point-to-Point Link The operating modes can be changed using the dashboard selector. When an operating mode is selected, an intuitive wizard is launched to guide the user in the basic configuration of the operating modes. Please consult advanced configuration settings page for a detailed description of all the settings. 1.1 Base Station When the Base Station mode is selected, the unit will operate as a Bridge to another Base Station or CPE. The network architecture is the typical point-to- point operation. The first step is to configure the wired WAN port which is supposed to be connected to the Internet. The WAN port can be configured using a static IP address or DHCP. With the second step, the wireless parameters can be configured including frequency, channel width, SSID and wireless security. 4 By scrolling down the menu, the network parameters for the wireless interface can be also configured as shown below. The wireless interface can be set to "bridge" the WAN and the Wireless interfaces together (same broadcast domain) or as a "router" by separating the WAN and Wireless broadcast domains (and IP addressing schemes). 1.2 CPE When the CPE mode is selected, the unit will operate as a Station that wirelessly connects to a Base Station. The network architecture is the typical point-to-point operation. The first step is to configure the Wireless interface which is supposed to be connected to the Internet through the Base Station. The wireless parameters can be configured including frequency, channel width, SSID and wireless security. By scrolling down the menu, the network parameters for the wireless interface can be also configured as shown below. The wireless interface IP address can be static or assigned by a DHCP. The second step is to configure wired LAN port which is supposed to be connected to the Customer Premises devices. A DHCP server can be also set up to provide IP addresses to the private Customer network. 5 1.3 Home Router The Home Router mode is typically used to provide wireless connectivity to home/office devices like PC and smartphone. Therefore the wireless interface is bridged with the LAN port of the Bitlomat unit whereas the WAN is connected to the Internet. The basic configuration consists of 3 steps. In the first step, the wired WAN is configured as shown below. Static or dynamic (DHCP) IP addresses can be set. The port can also be configured to use PPPoE In the second step, the wireless interface can be configured and it will be automatically bridged with the wired LAN interface. Therefore, no IP address is needed for it. In the final step, the local wired LAN can be configured. A DHCP server can be also set up to provide IP addresses to the private Customer network both the wireless and the wired LAN interfaces. 6 1.4 Point-to-Point Link The Point-to-Point mode can be used to create transparent layer 2 bridges extending two network segments within the same broadcast domain. The two units at the ends of the link must be set as "master" and "slave", respectively. Once the Link Role is selected, a static IP address can be set for the unit. Finally, the w…

Text truncated - open the document above for the full version.

Date: Apr. 30, 2013 To Whom it may concern, I would like to clarify the operating frequency range and intended operating purpose for below equipment: Model Name: Bitlomat 200 Sector Base Station FCC ID: RNF-BTLM200 Product Name: WiFi AP The operating frequency range of this equipment is only possible within the range of 5150—5250 MHz; however, in order to comply with the relevant FCC requirement (Part 15.407), when the 5150—5250 MHz is used for this equipment, this equipment should installed in the indoor, and this information will be described on the user manual. Regards, Signature ___________________________________ Name/Title : Jeff Broadwick / Sales Director Company Name: Bitlomat,LLC. TEL: (847) 291-1843 FAX: (847) 897-2090 Email: [email protected]

Date (24/04/2013) BABT FCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Bitlomat, LLC. 1850 Second Street Suite 201 Highland Park, IL 60035 USA, hereby authorize TUV SUD Taiwan, Mr. Peter Kao (7/F,No.37,Sec.2, Zhongyang S. Road, Beitou District, Taipei City 11270 Taiwan,R.O.C.,886-2-2898-6818) to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on Oct. 02, 2013 Sincerely, _____________________________________________ Company Officer: Jeff Broadwick / Sales Director Telephone Number: +1 (847) 291-1843 Email: [email protected]

Date: Apr. 30, 2013 Subject: DoC declaration To Whom it may concern, We, as the grantee of this project FCC ID: RNF-BTLM200, would like to declare that the composite portion categorized as computer peripheral has been authorized under the Declaration of Conformity procedures. Brand Name and Model Name of the specified radio equipment: Bitlomat / Bitlomat 200 Sector Base Station FCC ID: RNF-BTLM200 Product Name: WiFi AP Regards, Signature ___________________________________ Name/Title : Jeff Broadwick / Sales Director Company Name: Bitlomat,LLC. TEL: (847) 291-1843 FAX: (847) 897-2090 Email: [email protected]

Date (24/04/2013) BABT TCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Confidentiality Request FCC ID: RNF-BTLM200 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, Bitlomat LLC hereby requests permanent confidential treatment of information accompanying this application as outlined below: Common exhibits for which confidentiality is requested are: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, ______________________________________________ Company Officer: Jeff Broadwick / Sales Director Telephone Number: +1 (847) 291-1843 Email: [email protected]

Report No.: 131352R-RFUSP24V01 Page : 1 of 11 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo Report No.: 131352R-RFUSP24V01 Page : 2 of 11 (3) EUT Photo (4) EUT Photo

Report No.: 131352R-RFUSP24V01 Page : 3 of 11 (5) EUT Photo (6) EUT Photo Report No.: 131352R-RFUSP24V01 Page : 4 of 11 (7) EUT Photo (8) EUT Photo Report No.: 131352R-RFUSP24V01 Page : 5 of 11 (9) EUT Photo (10) EUT Photo Report No.: 131352R-RFUSP24V01 Page : 6 of 11 (11) EUT Photo (12) EUT Photo Report No.: 131352R-RFUSP24V01 Page : 7 of 11 (13) EUT Photo (14) EUT Photo Report No.: 131352R-RFUSP24V01 Page : 8 of 11 (15) EUT Photo (16) EUT Photo Report No.: 131352R-RFUSP24V01 Page : 9 of 11 (17) EUT Photo (18) EUT Photo Report No.: 131352R-RFUSP24V01 Page : 10 of 11 (19) EUT Photo (20) EUT Photo

Report No. 131352R-RFUSP32V01 Page: 1 of 4 RF Exposure Evaluation declaration Product Name WiFi AP Model No. Bitlomat 200 Sector Base Station FCC ID RNF-BTLM200 Applicant Bitlomat, LLC. Address 1850 SECOND ST STE 201HIGHLAND PARK, IL 60035,USA Date of Receipt Jan. 18, 2013 Date of Declaration Apr. 22, 2013 Report No. 131352R-RFUSP32V01 The declaration results relate only to the samples calculated. The declaration shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Report No. 131352R-RFUSP32V01 Page: 2 of 4 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 Average Time (Minutes) ) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm Pout = output power to antenna in mW 2 G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Report No. 131352R-RFUSP32V01 Page: 3 of 4 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°Cand 78％ RH. Report No. 131352R-RFUSP32V01 Page: 4 of 4 1.3. Test Result of RF Exposure Evaluation Product : WiFi AP Test Item : RF Exposure Evaluation Test Site : No.3 O AT S Operation Frequency 5180~5240MHz, 5745~5850MHz Maximum Conducted output power 29.39dBm Antenna gain 15.91dBi Output Power Into Antenna & RF Exposure Evaluation Distance: Output Power to Antenna (mW) Power Density at R = 60 cm (mW/cm2) 868.9604 0.720258 Power density is much lower than the limit (1 mW/cm 2 ). 註解 [u1]: Refer “Product”

Report No. 131352R-RFUSP28V01 Page: 1 of 87 FCC Test Report Product Name WiFi AP Model No Bitlomat 200 Sector Base Station FCC ID. RNF-BTLM200 Applicant Bitlomat, LLC. Address 1850 SECOND ST STE 201 HIGHLAND PARK, IL 60035,USA Date of Receipt Jan. 18, 2013 Issue Date Apr. 22, 2013 Report No. 131352R-RFUSP28V01 Report Version V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Report No. 131352R-RFUSP28V01 Page: 2 of 87 Test Report Certification Issue Date: Apr. 22, 2013 Report No.: 131352R-RFUSP28V01 Product Name WiFi AP Applicant Bitlomat, LLC. Address 1850 SECOND ST STE 201 HIGHLAND PARK, IL 60035,USA Manufacturer Bitlomat, LLC. Model No. Bitlomat 200 Sector Base Station EUT Rated Voltage AC 100-240V, 50-60Hz EUT Test Voltage AC 120V/60Hz Trade Name Bitlomat Applicable Standard FCC CFR Title 47 Part 15 Subpart C: 2012 ANSI C63.4: 2003, ANSI C63.10: 2009 Test Result Complied The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Documented By : ( Senior Adm. Specialist / Genie Chang ) Tested By : ( Assistant Engineer / Andy Lin ) Approved By : ( Manager / Vincent Lin ) Accredited by NIST (NVLAP) NVLAP Lab Code: 200533-0 Report No. 131352R-RFUSP28V01 Page: 3 of 87 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION .....................................................................................................5 1.1. EUT Description............................................................................................................................5 1.2. Operational Description ................................................................................................................7 1.3. Tested System Details....................................................................................................................8 1.4. Configuration of Tested System ....................................................................................................8 1.5. EUT Exercise Software .................................................................................................................8 1.6. Test Facility ...................................................................................................................................9 2. Conducted Emission..................................................................................................................10 2.1. Test Equipment............................................................................................................................10 2.2. Test Setup ....................................................................................................................................10 2.3. Limits ..........................................................................................................................................11 2.4. Test Procedure .............................................................................................................................11 2.5. Uncertainty ..................................................................................................................................11 2.6. Test Result of Conducted Emission.............................................................................................12 3. Peak Power Output ...................................................................................................................14 3.1. Test Equipment............................................................................................................................14 3.2. Test Setup ....................................................................................................................................14 3.3. Limits ..........................................................................................................................................14 3.4. Test Procedure .............................................................................................................................14 3.5. Uncertainty ..................................................................................................................................14 3.6. Test Result of Peak Power Output...............................................................................................15 4. Radiated Emission .....................................................................................................................19 4.1. Test Equipment............................................................................................................................19 4.2. Test Setup ....................................................................................................................................20 4.3. Limits ..........................................................................................................................................21 4.4. Test Procedure .............................................................................................................................22 4.5. Uncertainty ..................................................................................................................................22 4.6. Test Result of Radiated Emission................................................................................................23 5. RF antenna conducted test........................................................................................................30 5.1. Test Equipment............................................................................................................................30 5.2. Test Setup .......…

Text truncated - open the document above for the full version.

Report No. 131352R-RFUSP32V01 Page: 1 of 68 FCC Test Report Product Name WiFi AP Model No Bitlomat 200 Sector Base Station FCC ID RNF-BTLM200 Applicant Bitlomat, LLC. Address 1850 SECOND ST STE 201 HIGHLAND PARK, IL 60035,USA Date of Receipt Jan. 18, 2013 Issued Date Apr. 22, 2013 Report No. 131352R-RFUSP32V01 Report Version V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Report No. 131352R-RFUSP32V01 Page: 2 of 68 Test Report Certification Issued Date: Apr. 22, 2013 Report No.: 131352R-RFUSP32V01 The Test Results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Product Name WiFi AP Applicant Bitlomat, LLC. Address 1850 SECOND ST STE 201 HIGHLAND PARK, IL 60035,USA Manufacturer Bitlomat, LLC. Model No. Bitlomat 200 Sector Base Station FCC ID. RNF-BTLM200 EUT Rated Voltage AC 100-240V, 50-60Hz EUT Test Voltage AC 120V/60Hz Trade Name Bitlomat Applicable Standard FCC CFR Title 47 Part 15 Subpart E: 2012 ANSI C63.4: 2003,ANSI C63.10 2009, FCC KDB-789033 Test Result Complied Documented By : ( Senior Adm. Specialist / Genie Chang ) Tested By : ( Assistant Engineer / Andy Lin ) Approved By : ( Manager / Vincent Lin ) Report No. 131352R-RFUSP32V01 Page: 3 of 68 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION .....................................................................................................5 1.1. EUT Description............................................................................................................................5 1.2. Operational Description ................................................................................................................7 1.3. Tested System Datails....................................................................................................................8 1.4. Configuration of tested System .....................................................................................................8 1.5. EUT Exercise Software .................................................................................................................8 1.6. Test Facility ...................................................................................................................................9 2. Conducted Emission..................................................................................................................10 2.1. Test Equipment............................................................................................................................10 2.2. Test Setup ....................................................................................................................................10 2.3. Limits ..........................................................................................................................................11 2.4. Test Procedure .............................................................................................................................11 2.5. Uncertainty ..................................................................................................................................11 2.6. Test Result of Conducted Emission.............................................................................................12 3. Maximun conducted output power ..........................................................................................14 3.1. Test Equipment............................................................................................................................14 3.2. Test Setup ....................................................................................................................................14 3.3. Limits ..........................................................................................................................................15 3.4. Test Procedur ...............................................................................................................................15 3.5. Uncertainty ..................................................................................................................................15 3.6. Test Result of Maximum conducted output power......................................................................16 4. Peak Power Spectral Density....................................................................................................24 4.1. Test Equipment............................................................................................................................24 4.2. Test Setup ....................................................................................................................................24 4.3. Limits ..........................................................................................................................................24 4.4. Test Procedure .............................................................................................................................25 4.5. Uncertainty ..................................................................................................................................25 4.6. Test Result of Peak Power Spectral Density ...............................................................................26 5. Peak Excursion ..........................................................................................................................33 5.1. Test Equipment............................................................................................................................33 5.2. Test Setup ....................................................…

Text truncated - open the document above for the full version.

Report No.: 131352R-RFCA18V01 Page : 1 of 4 Attachment 1: EUT Test Setup Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 131352R-RFCA18V01 Page : 2 of 4 Front View of Radiated Test Back View of Radiated Test Report No.: 131352R-RFCA18V01 Page : 3 of 4 Front View of Radiated Test (Horn) Back View of Radiated Test (Horn) Report No.: 131352R-RFCA18V01 Page : 4 of 4 Front View of Radiated Test (Horn) Back View of Radiated Test (Horn)