RNNFMD-WAUSB X DRIVE

- - - - - - -

REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr ATTACHMENT C. - BLOCK DIAGRAM REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr

FCC ID : RNNFMD-WA HYUNDAI C–TECH NOVEMBER 27, 2003 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT : INNATOR CO., LTD. FCC ID: RNNFMD-WA FCC Part 15 Subpart B Certification Gentlemen: Transmitted herewith, on behalf of INNATOR CO., LTD. is an application for a FCC Part 15 Subpart B Certification of the following USB X DRIVER: FCC ID : RNNFMD-WA Model : FMD-WA Attached is the applicant’s Cover Letter, External/Internal Photos, Test Set-Up Photos, FCC ID & Label Location, User Manual, Block Diagram and Test Report. Should you have any questions or comments concerning the above, please contact the undersigned. KI SOO KIM EMC MAMAGER cc: Mr. SUNG HO HONG ------- R&D / MANAGER FCC ID : RNNFMD-WA HYUNDAI C–TECH • Solution for EMI We, INNATOR CO., LTD. , announce that all modifications will be incorporated into each unit sold in the U.S. 1. Connect Main PCB to Sub PCB for Ground Reinforcement (Please refer to next page of the photographs for Solution for EMI) INNATOR CO., LTD. 2003.11.27 R & D / MANAGER SUNG HO HONG FCC ID : RNNFMD-WA HYUNDAI C–TECH 1. Connect Main PCB to Sub PCB for Ground Reinforcement

REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 AT TA CH MEN T B. - EXTERNAL PHOTOS REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525

REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr ATTACHMENT A. - ID LABEL INFORMATION AND LOCATION PHOTOS REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr 1.1 ID Label Information Following is a copy of the label that will be placed on the rear side of the cabinet. Figure 3.1 PRODUCT LABEL Both the FCC ID and compliance statement are included in the product label REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr 1.2 Label Location Photos The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase.(Labeling requirements per 2.925) REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr

REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 ATTACHMENT F-1. - INTERNAL PHOTOS REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525

HYUNDAI CALIBRATION & CERTIFICATION TECH. CO., LTD. Product Compliance Division, EMC Team SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI, KYOUNKI-DO, 467-701, KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 CERTIFICATION Rule Part(s): Equipment Class: Standard(s): EUT Type: Read Write Speed: Model(s): Port/Connector(s) This equipment has been shown to be in compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.4-1992 (Grant Notes: #19, #28). I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Report prepared by : Ki-Soo Kim Manager of EMC Tech. Part ▷▷ HYUNDAI CALIBRATION & CERTIFICATION TECH. CO., LTD. ◁◁◁ RNNFMD-WA FMD-WA Manufacture; INNATOR CO.,LTD. 5FL Kwang Myoung BD 1029-21 Hongea-Dong, Dong An-Gu, Ahnyang-Shi Gyeonggi-Do, Korea INNATOR FRN :0009928177 Date of Issue : NOVEMBER 28, 2003 Test Report No.: HCT-F03-1108 Test Site: HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. HCT FRN : 0005-8664-21 FCC ID : MODEL : Part 15 & 2; ET Docket 95-19 FCC Class B Peripheral Device (JBP) FCC Class B: 1998 (CISPR 22) USB X DRIVE Read 8MB/sec, Write 6MB/sec FMD-WA USB Port FCC ID : RNNFMD-WA REPORT NO. : HCT-F03- 1108 HYUNDAI C–TECH 2/19 1/19 TABLE OF CONTENTS PAGE REPORT COVER 1 TABLE OF CONTENTS 2 1.1 SCOPE 3 2.1 INTRODUCTION (SITE DESCRIPTION) 4 3.1 PRODUCTION INFORMATION 5 4.1 DESCRIPTION OF TESTS (CONDUCTED) 6 4.3 DESCRIPTION OF TESTS (RADIATED) 7 5.1 LIST OF SUPPORT EQUIPMENT 8-9 6.1 TEST DATA (CONDUCTED) 10-14 7.1 TEST DATA (RADIATED) 15 8.1 SMPLE CALCULATIONS 16 9.1 TEST EQUIPMENT 17 10.1 TEST SOFTWARE USED 18 11.1 CONCLUSION 19 ATTACHMENT A: FCC ID LABEL & LOCATION ATTACHMENT B: EXTERNAL PHOTOGRAPHS ATTACHMENT C: BLOCK DIAGRAM(S) ATTACHMENT D: TEST SETUP PHOTOGRAPHS ATTACHMENT E: USER’S MANUAL ATTACHMENT F: INTERNAL PHOTOGRAPHS FCC ID : RNNFMD-WA REPORT NO. : HCT-F03- 1108 HYUNDAI C–TECH 3/19 MEASUREMENT REPORT 1.1 Scope Measurement and determination of electromagnetic emissions (EME) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission. • FCC ID : RNNFMD-WA • Equipment Class: FCC Class B Peripheral Device (JBP) • EUT Type: USB X DRIVE • Model(s): FMD-WA • Read Write Speed: Read 8MB/sec, Write 6MB/sec • Cable(s): Shielded USB cable(with ferrite on EUT end) • Rule Part(s): FCC Part 15 Subpart B • Test Procedure(s): ANSI C63.4 (1992) • Dates of Tests: NOVEMBER 24,2003~NOVEMBER 26,2003 • Place of Tests: 254-1,MAEKOK-RI,HOBUP-MYUN,ICHON-SI,KYOUNGKI-DO,467-701,KOREA Applicant Name: Address: INNATOR CO., LTD. 5FL Kwang Myoung BD 1029-21 Hongea-Dong, Dong An-Gu, Ahnyang-Shi, Gyeonggi-Do, Korea FCC ID : RNNFMD-WA REPORT NO. : HCT-F03- 1108 HYUNDAI C–TECH 4/19 2.1 INTRODUCTION The measurement procedure described in American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9kHz to 40GHz (ANSIC63.4-1992) was used in determining radiated and conducted emissions emanating from INNATOR CO., LTB USB X DRIVE FCC ID : RNNFMD-WA The open area test site and conducted measurement facility used to collect the radiated data are located at the 254-1, MAEKOK-RI,HOBUP-MYUN,ICHON-SI,KYOUNGKI-DO, 467-701,KOREA. The site is constructed in conformance with the requirements of ANSI C63.4and CISPR Publication 22. Detailed description of test facility was submitted to the Commissionand accepted dated July 23,2003 (Confirmation Number: EA90661) FCC ID : RNNFMD-WA REPORT NO. : HCT-F03- 1108 HYUNDAI C–TECH 5/19 3.1 PRODUCT INFORMATION 3.2 Equipment Description Equipment Under Test (EUT) is the INNATO CO.,LTD. ( Model : FMD-WA ) USB X DRIVE FCC ID: RNNFMD-WA Interface : USB Specification 2.0/(1.1 compatible) Supported OS : Windows98, SE, ME, 2000, XP, Mac OS 9.0 +, LINUX Kernel VERSION 2.4.0 (Driver CD installation needed for Windows 98, SE) Term of Data Preservation : 10 years Read Write Speed: Read 8MB/sec, Write 6MB/sec Power Supply : USB Bus-powered ( No separate power source needed) Components : Main Component, CD,USB Cable, Warrant, Necklace (Except HANA Mobile Disk) EMI Suppression Devices: Modifications were made to the device. Refer to cover letter. FCC ID : RNNFMD-WA REPORT NO. : HCT-F03- 1108 HYUNDAI C–TECH 6/19 4.1 Description of Tests(Conducted) 4.2 Powerline Conducted RFI (150kHz- 30MHz) The power line conducted RFI measurements were performed according to CISPR 22. The EUT was placed on a non-conducting 1.0 by 1.5 meter table which is 0.8 meters in height and 0.40 meters away from the vertical wall of the shielded enclosure. Power to the EUT is provided through a Rohde & Schwarz 50 Ω / 50 uH Line Impedance Stabilization Network (LISN) and the support equipment through a separate Solar 50 Ω / 50 uH Line- Conducted Test Facility LISN. Sufficient time for the EUT, support equipment, and test equipment were allowed in order for them to warm up to their normal operating condition. The RF output of the LISN was connected to the spectrum analyzer to determine the frequency producing the maximum EME. The spectrum was scanned from 150kHz to 30 MHz. Each maximum EME was remeasured using an EMI receiver. The detector function of the receiver was set to CISPR quasi- peak and average mode with the bandwidth set to 9 kHz. Each emission was maximized consistent with the typical applications by varying the configuration of the test sample. Interface cables were connected to the available interface ports of the test unit. The effect of varying the position of cables was investigated to find the configuration that produces maximum Diagr…

Text truncated - open the document above for the full version.

REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr ATTACHMENT D. - TEST SETUP PHOTOS REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr 1.CONDUCTED AND RADIATED MEASUREMENT PHOTOS [CONDUCTED MEASUREMENT PHOTO] REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr [RADIATED MEASUREMENT PHOTO] REPORT NO : HCT-F03-1108 FCC ID : RNNFMD-WA DATE :NOVEMBER 27, 2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr