ROO-MDU1720MDU1720 X-Band Doppler Motion Detector

MDU1720 User Manual.doc Page 1 USER MANUAL MDU1720 FCC-ID: ROO-MDU1720 IC: 10829A-MDU1720 Description The Microwave Solutions MDU1720 Motion Detector Unit is an X-Band microwave transceiver that utilises the Doppler shift phenomenon to "sense" motion. The unit, contained in a lightweight plastic housing, features a dielectric resonator stabilised FET oscillator, which provides stable operation over a broad temperature range in either CW or low duty cycle pulse mode and a balanced mixer for enhanced sensitivity and reliability. The basic principle of operation consists of detecting the frequency shift between a transmitted and a received signal reflected back from a moving object within the field of view of the unit. The unit produces a low level output signal which can be amplified and processed to provide an audible or visual alarm signal. The MDU1720 employs low cost surface mount manufacturing techniques which are field proven as being rugged and reliable. Absolute Maximum Ratings Parameter Symbol Rating Units Comment Supply Voltage V CC +5.25 V Operating Temperature T OP -40 to +70 °C Performance level not guaranteed Storage Temperature T STG -40 to +80 °C Electrical Characteristics Parameter Symbol Min. Typ. Max. Units Comment Transmit Frequency f T 10.500 10.525 10.500 GHz Preset during manufacture. Temperature Stability ∆f 6.5 MHz Over T OP range below Output Power P OUT 18 dBm EIRP Antenna Beamwidth 72 ° -3dB, horizontal with tab down 36 ° -3dB, vertical with tab down IF Output Offset V DC -150 0 +150 mV Into free space Sensitivity -86 dBm 10dB S/N ratio Noise 10 μV In 3Hz – 80Hz bandwidth Supply Voltage V CC 4.75 5.00 5.25 V Supply Current I CC 40 60 mA Pulse Width 5 μs Min. duty cycle – 1% Operating Temp T OP -10 +55 °C Full spec. compliance MDU1720 User Manual.doc Page 2 Coverage Patterns Connections & Mechanical Outline Handling Precautions The MDU1720 is sensitive to damage from ESD.  Normal precautions as usually applied to CMOS devices are sufficient when handling the module.  Touching the connection points should be avoided before soldering the module into circuit.  Using a multimeter (e.g. for resistance measurement) between any of the connection points may cause damage to the module. Certification Microwave Solutions Ltd. has established and maintains a Quality System that has been audited by BSI and holds ISO 9001:2008 approval under certificate FM56058. The MDU1720 complies with the requirements of the RoHS Directive European Union Directive 2011/65/EU and with the requirements of the REACH Regulations EC 1907/2006. MDU1720 User Manual.doc Page 3 OEM Responsibilities Manufacturers of mobile or fixed devices incorporating MDU1720 modules are authorized to use the FCC Grants and IC Certificates of the MDU1720 modules for their own final products under the conditions referenced in this document. It is the responsibility of the manufacturer of the final product to ensure that the MDU1720 module is operated within the approved conditions shown below. If the FCC/IC label of the module is not visible when the module is installed inside the final product then the outside of the final product must also display a label stating "Contains FCC ID: ROO-MDU1720" and "Contains IC: 10829A-MDU1720". Approved Operating Conditions to meet FCC/IC requirements The MDU1720 module can be operated in full compliance with FCC/IC requirements (depending on the characteristics of the final product) under the following conditions: 1) The power supply voltage provided to the module (at the module terminals) must be maintained within the specified range of +5 ± 0.25 volts under all conditions of AC line voltage irregularities, battery voltages, ambient temperatures and worst case load conditions. 2) If the module is operated under pulsed conditions, the rise and fall times of the power pulse shall be less than 1 μs and, during the pulse, the power supply voltage shall be maintained within the limits of 1) above under all conditions. 3) A minimum separation distance of 2.2cm is required between the user and the module when operating at 100% duty cycle. At a duty cycle of 40%, the minimum separation distance would be 1.4cm. 4) If the final product is designed only for use only within a building or to open building doors it can be operated with any duty cycle up to and including 100% (averaged over 100ms). 5) If the final product is designed for use in any other situation except in motor vehicles or on aircraft, it can be operated with a maximum duty cycle of 40% (averaged over 100ms) 6) If the final product is designed for use in motor vehicles or on aircraft, it can be operated with a maximum duty cycle of 40% (averaged over 100ms) as long as the final product includes features to prevent continuous operation (as defined in the FCC Rules and Industry Canada Standards). FCC and Industry Canada statements:  This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.  This device may only be operated using the approved integral antenna.  This device complies with FCC and Industry Canada radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.  This device must not be co-located or operating in conjunction with any other antenna or transmitter.  Changes or modifications not expressly approved by Microwave Solutions Ltd. may void the user's authority to operate this equipment  In the event that these conditions or the Approved Operating Conditions above cannot be met, then the FCC and Industry Canada certifications are no longer considered valid and the FCC ID and IC Certification Number cannot be used on the final product. In…

Text truncated - open the document above for the full version.

FCC Letter of Agency.doc MSL1001/03 January 21, 2013 TRaC Global Ltd 100 Frobisher Business Park Malvern Worcs., WR14 1BX United Kingdom LETTER OF AGENCY To Whom It May Concern: We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application, is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Yours faithfully Microwave Solutions Ltd Signature Full Name John Gilbert HALLATT

FCC Request for Confidentiality.doc MSL1001/03 January 21, 2013 TRaC Global Ltd 100 Frobisher Business Park Malvern Worcs., WR14 1BX United Kingdom REQUEST FOR CONFIDENTIALITY IN ACCORDANCE WITH FCC RULE 0.459 RE: Certification Application FCC ID: ROO-MDU1720 To Whom It May Concern: Please be advised that the following information is to be held confidential on behalf of Microwave Solutions Ltd.  Schematics  PCB Layout  Bill Of Materials  Block Diagram  Operational Description The application contains technical information which Microwave Solutions Ltd. deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Yours faithfully Microwave Solutions Ltd Signature Full Name John Gilbert HALLATT

A RADIO TEST REPORT FOR MICROWAVE SOLUTIONS Ltd ON X-BAND DOPPLER MOTION DETECTOR UNITS MODEL NUMBER MDU1720 DOCUMENT NO. TRA-012363-W-NA-1 Total number of pages: 40 TRaC Wireless Test Report : TRA-0123 63-W-NA-1 Applicant : Microwave Solutions Ltd Apparatus : MDU1720 Specification(s) : CFR47 Part 15 & RSS-210 Purpose of Test : Limited Modular Approval FCCID : ROO-MDU1720 Certification Number : 10829A-MDU1720 Authorised by : : Radio Product Manager Issue Date : 18 th January 2013 Authorised Copy Number : PDF TRaC Global Test Report: TRA-012363-W-NA-1 Contents Section 1: Introduction 4 1.1 General 4 1.2 Tests Requested By 5 1.3 Manufacturer 5 1.4 Apparatus Assessed 5 1.5 Test Result Summary 6 1.6 Notes Relating To The Assessment 7 1.7 Deviations from Test Standards 7 Section 2: Measurement Uncertainty 8 2.1 Measurement Uncertainty Values 8 Section 3: Modifications 10 3.1 Modifications Performed During Assessment 10 Appendix A: Formal Emission Test Results 11 A1 Transmitter Intentional Emission Radiated 12 A2 Radiated Electric Field Emissions 14 A3 Power Line Conducted Emissions 17 Appendix B: Supporting Graphical Data 19 Appendix C: Additional Test and Sample Details 27 Appendix D: Additional Information 33 Appendix E: Calculation of the duty cycle correction factor 34 Appendix F: Photographs and Figures 35 Appendix G: MPE Calculation 39 3 TRaC Global Test Report: TRA-012363-W-NA-1 Section 1: Introduction 1.1 General This report contains an a ssessment of an apparatus against Electromagnetic Compatibility Standards based upon tests carried out on samples submitted to the Laboratory. Test performed by: TRaC Global [ ] Unit E South Orbital Trading Park Hedon Road Hull, HU9 1NJ. United Kingdom. Telephone: +44 (0) 1482 801801 Fax: +44 (0) 1482 801806 TRaC Global [X] Unit 1 Pendle Place Skelmersdale West Lancashire, WN8 9PN United Kingdom Telephone: +44 (0) 1695 556666 Fax: +44 (0) 1695 577077 Email: [email protected] Web site: http://www.tracglobal.com Tests performed by: D. Winstanley Report author: D. Winstanley This report must not be reproduced except in full without prior written permission from TRaC Global. 4 TRaC Global Test Report: TRA-012363-W-NA-1 1.2 Tests Requested By This testing in this report was requested by : Microwave Solutions Ltd Hamilton House 111 Marlowes Hemel Hempstead Herts HP1 1BB UNITED KINGDOM 1.3 Manufacturer As Above 1.4 Apparatus Assessed The followin g apparatus was assessed between the dates 4 th – 19 th December 2012: X-Band Doppler Motion Detector Unit Model Number MDU1720 The unit is able to operate at 100% transmitter on mode or in a pulsed mode with a duty cycle down to 1% The MDU1720 is a module. This assessment of the MDU1720 covers use in both indoor and outdoor applications. 5 TRaC Global Test Report: TRA-012363-W-NA-1 1.5 Test Result Summary Full details of test results are contained within Appendix A. The following table summarises the results of the assessment. The statements relating to compliance with the standards below apply ONLY as qualified in the notes and deviations stated in sections 1.6 to 1.7 of this test report. Full details of test results are contained within Appendix A. The following table summarises the results of the assessment. Regulation Test Type Title 47 of the CFR: Part 15 Subpart (c) RSS-210 Section Measurement standard Result Spurious Emissions Radiated <1000MHz 15.209 RSS-Gen 4.9 RSS-210 Annex 7 ANSI C63.10:2009 Pass Spurious Emissions Radiated >1000MHz 15.209 & 15.245 RSS-Gen 4.9 RSS-210 Annex 7 ANSI C63.10:2009 Pass AC Power conducted emissions 15.107 & 15.207 RSS-Gen Issue 3 7.2.4 ANSI C63.10:2009 Pass Intentional Emission Frequency 15.245 RSS-210 Annex 7 ANSI C63.10:2009 Pass Intentional Emission Field Strength 15.245 RSS-210 Annex 7 ANSI C63.10:2009 Pass Intentional Emission Band Occupancy 15.215 RSS-Gen Issue 3 4.6 ANSI C63.10:2009 Pass Intentional Emission ERP (mW) - - ANSI C63.10:2009 - Unintentional Radiated Spurious Emissions 15.109 RSS-Gen Issue 3 4.10 ANSI C63.10:2009 Pass Antenna Arrangements Integral: 15.203 RSS-Gen Issue 3 7.1.2 - Pass Antenna Arrangements External Connector 15.204 RSS-Gen Issue 3 7.1.2 - - Restricted Bands 15.205 RSS-Gen Issue 3 7.2.2 - - Maximum Frequency of Search 15.33 RSS-Gen Issue 3 4.9 - - Extrapolation Factor 15.35(f) RSS-Gen Issue 3 7.2.7 - - Abbreviations used in the above table: ANSI C 63.10:2009 is outside the scope of the laboratories UKAS accreditation. CFR : Code of Federal Regulations ANSI : American National Standards Institution RSS : Radio Standards Specification PLCE : Power Line Conducted Emissions 6 TRaC Global Test Report: TRA-012363-W-NA-1 1.6 Notes Relating To The Assessment With regard to this assessment, the following points should be noted: The results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. The apparatus was set up and exercised using the configurations, modes of operation and arrangements defined in this report only. Particular operating modes, apparatus monitoring methods and performance criteria required by the standards tested to have been performed except where identified in Section 1.7 of this test report (Deviations from Test Standards). For emissions testing, throughout this test report, “Pass” indicates that the results for the sample as tested were below the specified limit (refer also to Section 2, Measurement Uncertainty). Where relevant, the apparatus was only assessed using the monitoring methods and susceptibility criteria defined in this report. All testing with the exception of testing at the Open Area Test Site was performed under the following environmental conditions: Temperature : 17 to 23 C Humidity : 45 to 75 % Barometric Pressure : 86 to 106 kPa All dates used in this report are in the format dd/mm/yy. This assessment has been performed in accordance with the requirements of ISO/IEC 17025. 1.7 Deviations fr…

Text truncated - open the document above for the full version.