RRK-MSSS2571Z-Wave 800 module

Alpha Networks Inc. No. 8, Li-Hsin 7th Rd., Hsinchu Science Park, Hsinchu 300094, Taiwan Date: 2026-04-22 FCC ID: RRK-MSSS2571 To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing Alpha Networks Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receivingan equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing Alpha Networks Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, ----------------------------------------------- Kelly Tsai / Director Alpha Networks Inc. Tel: 886-3-563-6666 Fax: 886-3-563-5091 E-mail: [email protected]

Alpha Networks Inc. U.S. Agent for Service of Process Attestation To the attention of Federal Communications Commission Authorization and Evaluation Division U.S. Agent Company Name: Alpha Technical Services Inc. FRN: 0033567611 Contact Name: Alan Chien Street Address: 7 Cushing, Irvine City/Province/Zip: CA, USA, 92618 Telephone No: (714) 488-2618 Email: [email protected] This letter is to confirm that we have accepted the responsibility to act as the designated U.S. Agent for service of process as required by §2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: 2026-04-22 Signed by (printed name): Alan Chien Applicant Company Name: Alpha Networks Inc. Grantee Code: RRK FRN: 0010111144 Contact Name: Kelly Tsai Street Address: No. 8, Li-Hsin 7th Rd., Hsinchu Science Park, City/Province/Zip: Hsinchu, Taiwan, 300094 Telephone No: 886-3-563-6666 Email: [email protected] This letter is to confirm that the Applicant has designated the U.S Agent noted above for the purpose of accepting service of process on their behalf as required by §2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signature: Date: 2026-04-22 Signed by (printed name): Kelly Tsai

Alpha Networks Inc. No. 8, Li-Hsin 7th Rd., Hsinchu Science Park, Hsinchu 300094, Taiwan Date: 2026-04-22 FCC ID: RRK-MSSS2571 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- Kelly Tsai / Director Alpha Networks Inc. Tel: 886-3-563-6666 Fax: 886-3-563-5091 E-mail: [email protected]

Alpha Networks Inc. No. 8, Li-Hsin 7th Rd., Hsinchu Science Park, Hsinchu 300094, Taiwan Date: 2026-04-22 FCC ID: RRK-MSSS2571 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization) in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ----------------------------------- Kelly Tsai / Director Alpha Networks Inc. Tel: 886-3-563-6666 Fax: 886-3-563-5091 E-mail: [email protected]

Alpha Networks Inc. No. 8, Li-Hsin 7th Rd., Hsinchu Science Park, Hsinchu 300094, Taiwan Date: 2026-04-22 FCC ID: RRK-MSSS2571 A U T H O R I Z A T I O N L E T T E R To Whom It May Concern: Alpha Networks Inc. hereby authorizes Jenny Nien / Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Jenny Nien / Specialist of BV CPS Taoyuan on Alpha Networks Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Kelly Tsai / Director Alpha Networks Inc. Tel: 886-3-563-6666 Fax: 886-3-563-5091 E-mail: [email protected]

FCC ID: RRK-MSSS2571 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch July 10, 2026 Dear Application Examiner, Alpha Networks Inc., Z-Wave 800 module, FCC ID: RRK-MSSS2571 would like to have your authorization as a modular approval as below description: The requirements of § 15.212 Modular transmitters have been shown in the following statements. Item Modular requirement Y/N Comments 1 The radio elements of the modular transmitter must have their own shielding Y This modular has its own RF shielding. The radio portion of this module has been shielded, please see exhibition External Photo. 2 The modular transmitter must have buffered modulation/data inputs. Y The module’s transmitter chip utilizes buffered data inputs. 3 The modular transmitter must have its own power supply regulation. Y The module contains its own power supply regulator chip. 4 The modular transmitter must comply with the antenna and transmission system requirements of §§ 15.203, 15.204(b) and 15.204(c). Y The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5 Be tested in a stand-alone configuration, i.e., the antenna, AC or DC power and data input/output lines must be connected to the module but, the module must not be inside another case during testing. Y The EUT was tested in a stand-alone configuration via a USB extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. Y The module label is permanently affied to the EUT. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. 7 The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. Y The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8 Address compliance with the Commission`s RF exposure limits in Sections 1.1310 and 2.1093. Y The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Jenny Nien / Specialist Bureau Veritas Consumer Products Services (H.K.) Ltd., Hsinchu Branch

Alpha Networks Inc. Non-Disclosure Agreement This Non-Disclosure Agreement (hereinafter called "Agreement") is made as of , 20__ (“Effective Date”) by and between Alpha Networks Inc. ("Alpha"), a company duly organized and existing under the laws of Taiwan (R.O.C.), and having its principal place of business at No.8, Li-Hsin 7th Rd., Hsinchu Science Park, Hsinchu 300094, Taiwan (R.O.C.), and ("The Company"), a company duly organized and existing under the laws of , having its principal place of business at , and signed by their duly authorized representatives. Whereas , the Parties desire to explore a certain business possibilities in the area of (" Purpose "), production or foundry of products, assistance or transfer of technology, or other business relationship, and in furtherance thereof, it is understood and agreed that each party will provide certain proprietary business and trade information to the other party which all parties consider confidential, may be provided or disclosed to the other party. Now, therefore , in consideration of these promises, both parties agreed as follows : Article 1 : Confidential Information 1.1 "Confidential Information" shall mean any information, technical data or know-how that might reasonably be considered proprietary, sensitive or private, including but not limited to, that which relates to the business, services, or Products of the parties on recorded, including ： (a) Technical information, know-how, data, techniques, and discoveries, inventions, ideas and unpublished patent applications, proprietary information, formula, analyses, laboratory reports, financial information, studies, or other information relating to the parties, whether or not contained in samples, documents, sketches, photographs, drawings, lists, and the like; (b) Data and other information in connection with the marketing of the Products of the parties including cost information, business policies, revenues and markets, distributors and customers, and similar items of information whether or not contained in documents or other tangible materials; and The Confidential Information embodied in tangible material shall be labeled as “Confidential” or bear a similar legend. The Confidential Information disclosed 2026 Ver. orally or visually shall be identified as “Confidential” at time of disclosure and confirmed as such in writing within thirty (30) days upon the disclosure. 1.2 Confidential Information does not include information that: (a) is in one party's possession before the time of disclosure by the other party; (b) has become public known after its disclosure from one party to the other party, without fault of the receiving party; (c) is received from a third party without similar restriction and without breach of this Agreement; (d) is independently developed by the receiving party; (e) is disclosed pursuant to legal obligation beyond the control of the disclosing and receiving parties; (f) is disclosed without restriction by the disclosing party to a third party; Article 2 : Treatment in Confidence Both parties agree not to use the Confidential Information for their own use for any purpose except to evaluate whether they desire to enter a business relationship with the other party or as necessary to carry out the terms of such business relationship and shall be consent by each other in writing. Both parties further agree that they will not disclose Confidential Information to any other persons/parties, including their distributors or agents, other than the party's employees who are directly involved in the business relationship or the decision whether or not pursue it, and unto them only a need-to-know basis. Both parties agree they shall take reasonable security measures and use cares to preserve and protect the secrecy of, and to avoid disclosure or use of, Confidential Information. Both parties agree to promptly advise the other party in writing of any misappropriation of misuse by any person of such Confidential Information that may come to its attention. Article 3 : Ownership; Return of Documents Nothing contained in this Agreement shall be construed as granting or conferring rights by license or otherwise in any Confidential Information disclosed. The Confidential Information shall be deemed the property of the disclosing party and, on termination or expiration of this Agreement for any reason, or on request by any of the parties on a adequate reason hereto, any equipment, documentation or other Confidential Information of any party, which has been furnished to the other party shall be promptly returned by the receiving party to the disclosing party, accompanied by all copies of such documentation made by the party which received such documentation. The return of such materials shall not affect the remaining obligations of receiving party under this Agreement. Article 4 : Rights to Assert Nothing herein contained shall be deemed to limit or restrict the rights of both parties to assert claims for patent or copyright infringement against the other party. Article 5 : Arbitration and Governing Law 5.1 Arbitration Any controversy or claim arising out of or relating to this Agreement, or the breach thereof, which has not been resolved within the thirty (30) days period after any party give a notice to the other party, shall be finally settled under the Rules of Conciliation and Arbitration of the International Chamber of Commerce 1990 by one or more arbitrators appointed in accordance with the said Rules, at whose decision shall be accepted as final by all parties, and judgment upon the award rendered by the Arbitrator(s) may be entered any court having jurisdiction thereof. The place of arbitration shall be Taipei, Taiwan (R.O.C.). The process of arbitration shall be executed in Chinese language. The fees for arbitration and/or any other charges, if any, shall be borne by the losing party unless otherwise awarded by the court. The parties agree that service of any notices …

Text truncated - open the document above for the full version.

LABEL & LABEL LOCATION Brand: Alpha Networks Model: MSSS-2571 Front view of the module Notice: The FCC ID and IC ID will be permanently marked on the module shielding. The shielding is not intended to be removed and cannot be separated without damaging the module. FCC ID: RRK-MSSS2571 IC: 4833A-MSSS2571

Report No.: MFBAOZ-WTW-P26010501 Page No. 1 / 9 Report Format Version: 7.1.0 Reference No.: BAOZ-WTW-P26010501 RF EXPOSURE REPORT CERTIFICATE OF CONFORMITY FCC Rule Part: FCC Part 2 (Section 2.1091) Report No.: MFBAOZ-WTW-P26010501 FCC ID: RRK-MSSS2571 Product: Z-Wave 800 module Brand: ALPHA Model No.: MSSS-2571 Received Date: 2026/1/23 Test Date: 2026/3/3 Issued Date: 2026/5/29 Applicant: Alpha Networks Inc. Address: No. 8, Li-Hsin 7th Rd., Hsinchu Science Park, Hsinchu 300094, Taiwan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 Approved by: , Date: 2026/5/29 May Chen / Manager This test report consists of 9 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Claire Kuan / Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: MFBAOZ-WTW-P26010501 Page No. 2 / 9 Report Format Version: 7.1.0 Reference No.: BAOZ-WTW-P26010501 Table of Contents Release Control Record ....................................................................................................................................................... 3 1 Certificate .................................................................................................................................................................... 4 2 Applicable RF Exposure Limit .................................................................................................................................. 5 3 Test Results ................................................................................................................................................................ 7 4 Conclusion .................................................................................................................................................................. 8 5 Information of the Testing Laboratories .................................................................................................................. 9 Report No.: MFBAOZ-WTW-P26010501 Page No. 3 / 9 Report Format Version: 7.1.0 Reference No.: BAOZ-WTW-P26010501 Release Control Record Issue No. Description Date Issued MFBAOZ-WTW-P26010501 Original release. 2026/5/29 Report No.: MFBAOZ-WTW-P26010501 Page No. 4 / 9 Report Format Version: 7.1.0 Reference No.: BAOZ-WTW-P26010501 1 Certificate Product: Z-Wave 800 module Brand: ALPHA Test Model: MSSS-2571 Sample Status: production module Applicant: Alpha Networks Inc. Test Date: 2026/3/3 FCC Rule Part: FCC Part 2 (Section 2.1091) Standard: KDB 447498 D04 Interim General RF Exposure Guidance v01 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Report No.: MFBAOZ-WTW-P26010501 Page No. 5 / 9 Report Format Version: 7.1.0 Reference No.: BAOZ-WTW-P26010501 2 Applicable RF Exposure Limit § 1.1310 Radiofrequency radiation exposure limits. (a) Specific absorption rate (SAR) shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in § 1.1307(b) of this part within the frequency range of 100 kHz to 6 GHz (inclusive). (b) The SAR limits for occupational/controlled exposure are 0.4 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 8 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit for occupational/controlled exposure is 20 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume…

Text truncated - open the document above for the full version.

Antenna Check Sheet Date: 2026/01/08 1 MSSS-2571 Antenna Check Sheet © 2018 by Alpha Networks Corporation All Right Reserved Antenna Check Sheet Date: 2026/01/08 2 Revision History: Version Date Change Description 1.0 2026/01/22 New Release 2.0 2026/05/20 Add Test information, Test method, Test software. 3.0 2026/06/04 Correct Antenna Type Antenna Check Sheet Date: 2026/01/08 3 Contents Antenna Specification........................................................... 4 Test Information................................................................. 4 Test Method..................................................................... 4 Test Software..................................................................... 5 Test Procedure..................................................................... 5 Test Result........................................................................ 6 Return Loss................................................................. 6 2D Radiation Patterns....................................................... 6 Antenna Gain Table....................................................... 7 Antenna Vendor Information................................................ 7 Antenna Check Sheet Date: 2026/01/08 4 Antenna Specification Test information: Test Condition Test Engineer Test Date Radiated Eric 2025.12.30. Band(MHz) Test Frequency(MHz) 2400-2500 2400/2450/2500 862.5~926.3 862.5/890/900/926.3 Testing Location Address: No. 113, Sec. 1, Jiafeng 11th Rd., Zhubei City, Hsinchu County 302049, Taiwan (R.O.C.) Instrument Manufacturer Model NO. Cali.Due Date Calibrated Until ENA Network Analyzer Keysight E5071C 2025/10/18 2026/10/17 Test Chamber ETS-Lindgren AMS-8923 2025/10/18 2026/10/17 Test Method: 23 measuring probe antennas are fixed on a circular ring at equal angular intervals, while the device under test (DUT) is placed on a horizontal turntable at the center of the ring. During testing, the turntable rotates along the azimuth axis. For each azimuth-elevation angle combination (θ, φ), the RF switch matrix sequentially connects each of the 23 probes (or conducts parallel measurements). A vector network analyzer (VNA) measures and records the S21 data (complex numbers, including magnitude and phase) corresponding to each probe. Therefore, for each sampling point on the spherical surface, 23 sets of near-field data from 23 probes at different fixed spatial positions are obtained. Ant Antenna Brand Antenna. model Antenna type Antenna Gain (dBi) Frequency Range (MHz) Connector type Cable length (cm) Cable Loss Remark A1-ZWave HONGBO module- ZWave PIFA 2.9 862.5~926.3 I-pex 5 0 antenna gain with cable loss A2-BT HONGBO module-BT PIFA 3.5 2400~2500 I-pex 5 0 antenna gain with cable loss Antenna Check Sheet Date: 2026/01/08 5 Depending on the size and frequency of the device under test (DUT), set appropriate sampling intervals for θ and φ to meet the near-field sampling density requirements. Integrate and process the sampled near-field data to perform far-field calculation, and then consolidate the far-field values for each θ and φ angle. This allows for a comprehensive characterization of the DUT's far-field radiation performance. Test Software: NPAC Spherical Measurement,AMS-8923-142-G Test Procedure: Place the device under test (DUT) at the center of a laser-aligned ring and secure it on a low-dielectric-constant foam turntable. Connect the RF cables from the vector network analyzer (VNA) into the anechoic chamber. Then, run the EM-Pro. Spherical Near-Field Antenna Measurement System to record the electric field amplitude and phase corresponding to each θ and φ angle, thereby completing the three-dimensional sampling that encloses the entire DUT. Antenna Check Sheet Date: 2026/01/08 6 Test Result: Return Loss Ant 1 : Z-Wave Antenna Ant 2 : BT Antenna 2D Radiation Patterns: Ant 1 : Z-Wave Antenna Antenna Check Sheet Date: 2026/01/08 7 Ant 2: BT Antenna Antenna Gain Table: Frequency(MHz) Ant 1(dBi) 862.5 1.5 890 2.7 910 2.9 926.3 2.2 Frequency(MHz) Ant 2(dBi) 2400 3.5 2450 2.9 2500 2.2 Antenna Vendor information: Antenna Vendor : Hongbo wireless communication technology co., ltd. Test date: 2025/12/29 Test Engineer: Eric Address of test site: No. 113, Sec. 1, Jiafeng 11th Rd., Zhubei City, Hsinchu County 302049, Taiwan (R.O.C.)

Report No.: RFBAOZ-WTW-P26010501 Page No. 1 / 47 Report Format Version: 7.2.0 Reference No.: BAOZ-WTW-P26010501 TEST REPORT CERTIFICATE OF CONFORMITY Standard: 47 CFR FCC Part 15, Subpart C (Section 15.247) Report No.: RFBAOZ-WTW-P26010501 FCC ID: RRK-MSSS2571 Product: Z-Wave 800 module Brand: ALPHA Model No.: MSSS-2571 Received Date: 2026/1/23 Test Date: 2026/2/13 ~ 2026/4/15 Issued Date: 2026/5/29 Applicant: Alpha Networks Inc. Address: No. 8, Li-Hsin 7th Rd., Hsinchu Science Park, Hsinchu 300094, Taiwan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 Approved by: , Date: 2026/5/29 May Chen / Manager This test report consists of 47 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Claire Kuan / Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBAOZ-WTW-P26010501 Page No. 2 / 47 Report Format Version: 7.2.0 Reference No.: BAOZ-WTW-P26010501 Table of Contents Release Control Record ....................................................................................................................................................... 4 1 Certificate .................................................................................................................................................................... 5 2 Summary of Test Results .......................................................................................................................................... 6 2.1 Measurement Uncertainty ........................................................................................................................................ 6 2.2 Supplementary Information ...................................................................................................................................... 6 3 General Information ................................................................................................................................................... 7 3.1 General Description .................................................................................................................................................. 7 3.2 Antenna Description of EUT ..................................................................................................................................... 8 3.3 Channel List .............................................................................................................................................................. 9 3.4 Test Mode Applicability and Tested Channel Detail ................................................................................................ 10 3.5 Duty Cycle of Test Signal ........................................................................................................................................ 11 3.6 Test Program Used and Operation Descriptions .................................................................................................... 12 3.7 Connection Diagram of EUT and Peripheral Devices ............................................................................................ 12 3.8 Configuration of Peripheral Devices and Cable Connections ................................................................................ 13 4 Test Instruments ...................................…

Text truncated - open the document above for the full version.