RSZ-TJE618USB Modem

1 USB Modem E618 User Manual 2 Contents 1 Modem Introduction....................................................................3 1.1 Introduction............................................................................ 3 1.2 Warning and Notice..............................................................3 1.3 Applicability Scope............................................................... 5 1.4 System requirements .................................................................6 1.5 Functions................................................................................... 6 2 Installation ...................................................................................6 2.1 Installing Software................................................................ 6 2.2 Running Application Software.................................................... 7 2.3 Uninstalling Software ................................................................ 8 3 After-sales service guide and the Warranty Cards................8 3.1 Warranty description........................................................8 3.2 Cases do not included in Warranty Services..........................9 3.3 The Warranty Cards.........................................................9 3 1 Modem Introduction 1.1 Introduction Thank you for using TJ-E618 3G USB Modem. To guarantee the modem always in its best condition, please read this manual carefully and keep it for further use. The pictures, symbols and contents in this manual are just for your reference. They might not be completely identical with your modem. We operate a policy of continuous development. We reserve the right to update the technical specifications in this document at any time without prior notice. The TJ-E618 USB modem is a multi-mode 3G USB modem, working inEVDO/CDMA 2000/CDMA 1X networks. With USB interface connecting to a laptop or a desktop PC, it integrates the functionality of a modem and a mobile phone (SMS), and combines mobile communication with Internet perfectly. It supports data, and SMS services through the mobile phone network, enabling you to communicate anytime and anywhere. 1.2 Warning and Notice To the owner  Some electronic devices are susceptible to electromagnetic interference sent by modem if inadequately shielded, such as electronic system of vehicles. Please consult the manufacturer of the device before using the modem if necessary.  Operating of notebook PC and modem may interfere with medical devices like hearing aids and pacemakers. Please always keep them more than 20 centimeters away from such medical devices when they are turned on. Turn the modem off if necessary. Consult a physician or the manufacturer of the medical device before using the modem.  Be aware of the usage limitation when using a modem at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Therefore, turn off your modem if required. Don’t touch the inner antenna area if not necessary. Otherwise it will affect your modem’s performance.  Store the modem out of the reach of little children. The modem may cause injury if used as a toy. Modem  Please use original accessories or accessories that are authorized. Using any unauthorized accessories may affect your modem’s performance, and violate related national regulations about telecom terminals.  Avoid using the modem near metallic structure device or establishment that can emit electromagnet wave. Otherwise it may influence receiving signals.  The modem is non-waterproof type, please keep it dry and store in shady and cool place.  Don’t use the modem immediately after a sudden temperature change. In such case, it will produce dew inside and outside the modem, so don’t use it until it becomes dry. 4  Take the modem carefully. Don’t lose, bend or cause it struck. Otherwise it will lead to destruct damage.  No dismantling by non-professional and only qualified maintainer can undertake repair work. In Aircraft  Please power off the modem before the airplane takes off. In order to protect airplane’s communication system from interference, it is never allowed to use the modem when it is in flight. Using it before the plane taking off should get aircrew’s permission according to safety regulations. 1.3 Applicability Scope TJ-E618 3G USB Modem supports the present mainstream types of laptops and desktop PCs, such as HP, IBM, Toshiba, Lenovo, Dell, Founder, Apple, etc. 1.4 System requirements Operating System: Windows 2000/XP/Vista/7, Mac 10.8 and Linux Configuration: CPU Pentium III or above Hard disk 100M or above Memory 128M or above The performance of the modem may be influenced if configuration below recommended requirement. 1.5 Functions Functions: SMS, data service, Phone Book service, applied management, support microSD card etc. 5 2 Installation 2.1 Installing Software 1. Connect your modem to your PC. 2. After a few seconds, the system automatically pop-up a EVOD USB Modem folder, and start software installation automatically. Note: If your PC doesn’t support automatic installation, start the installation program by run the AutoRun.exe from the CD-ROM driver, and then follow the steps to install. 3. Choose the setup language(In option: Chinese, English). And you can select a different location by pressing icon, and then click the Next button. 4. The system shows the installation progress. Wait a minute and program installation is complete. Note: If you have problems with installation after the above operation, please contact the service provider for help. After the installation, select Start → Programs and there will be a EVDO USB Modem program group，which includes EVDO USB Modem and Uninstall. There will be a shortcut icon on the desktop. 2.2 Running Application Software 1. After the modem is correctly connected, the application software launches automatically. 2. Otherwise, click the “Start → Programs →EVDO USB Modem→EVDO USB Modem” …

Text truncated - open the document above for the full version.

Shenzhen Tianjian Telecom Technology Co., Ltd 22J Room, D Building Huaqiang Square, Huaqiang Road, Shenzhen, Guangdong, China DATE :2013-2-4 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Hans.Hu of Global United Technology Services Co., Ltd. 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District Shenzhen Guangdong to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Shenzhen Tianjian Telecom Technology Co., Ltd and 22J Room, D Building Huaqiang Square, Huaqiang Road, Shenzhen, Guangdong, China Dated this / Day of 2/4/2013 / Agency agreement expiration date: 2/4/2014 By: Minkang Fu Signature Printed Title: Manager On behalf of : Shenzhen Tianjian Telecom Technology Co., Ltd Telephone: 86-137 2556 2203

Differences Declaration To whom concern, We company Shenzhen Tianjian Telecom Technology Co., Ltd hereby declares: The product model(s) E301, E302, E602, E603, E608, E613, E616, E617, W801, W802, W803, W805, W806, W807, W808, W916, W917, W918, W928, WM72, WM31 are identical in the same PCB layout, interior structure and electrical circuits with the model E618 which tested in Global United Technology Services Co., Ltd., the only differences are the model name and appearance color for commercial purpose. Authorized signature: Position: Senior Buyer Date: 2013-2-24

Date: 24/02/2013 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: RSZ-TJE618 To Whom It May Concern: We, Shenzhen Tianjian Telecom Technology Co., Ltd, are applying FCC DOC for product USB modem which model no. is E618, E301, E302, E602, E603, E608, E613, E616, E617, W801, W802, W803, W805, W806, W807, W808, W916, W917, W918, W928, WM72, WM31. the FCC DOC is doing at proper FCC authorized and recognized lab, and FCC DOC will be issued soon. If you have any question or concerns, pls. contact us. Sincerely, Client’s signature Client’s name / title Minkang Fu / Senior Buyer Contact information / address TEL: 86-137 2556 2203 Address: 22J Room, D Building Huaqiang Square, Huaqiang Road, Shenzhen, Guangdong, China

Shenzhen Tianjian Telecom Technology Co., Ltd 22J Room, D Building Huaqiang Square, Huaqiang Road, Shenzhen, Guangdong, China 2013-2-4 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID:RSZ-TJE618 Product Name: USB Modem Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: • Schematics • Block diagram • Operational Description • Tune up procedure • Part list These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 2/4/2013 By: Minkang Fu Signature Printed Title: Manager On behalf of : Shenzhen Tianjian Telecom Technology Co., Ltd Telephone: 86-137 2556 2203

Report No.: GTSE13010005401 Global United Technology Services Co., Ltd. Project No.: GTSE130100054RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 46 of 48 10 EUT Constructional Details Report No.: GTSE13010005401 Global United Technology Services Co., Ltd. Project No.: GTSE130100054RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 47 of 48

Length=15mm*20mm USB Modem Model: TJ-E618 FCC ID: RSZ-TJE618 TIANJIAN Telecom Made in China

Label Location

Report No.: GTSE13010005401 Global United Technology Services Co., Ltd. Project No.: GTSE130100054RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 48 of 48 -----End-----

SHENZHEN SUNWAY COMMUNICATION CO.,LTD Report NO.: TS20130218001 Page 1 / 87 FCC SAR EVALUATION REPORT For Shenzhen Tianjian Telecom Technology Co., Ltd 22J Room, D Building Huaqiang Square, Huaqiang Road, Shenzhen, Guangdong, China Product Name: USB Modem Model No. : E618, E301, E302, E602, E603, E608, E613, E616, E617, E618, W801, W802, W803, W805, W806, W807, W808, W916, W917, W918, W928, WM72, WM31 FCC ID: RSZ-TJE618 Date of Receipt: 1 st Feb. 2013 Date of Test: 1 st -24 th Feb. 2013 Issued Date: 28 th Feb.2013 Report No.:TS20130218001 Report Version: V1.0 Issue By Shenzhen Sunway Communication CO.,LTD Testing Center Building 9, Changxing High-tech Industrial Park, Wan’an Road, Shajing Town, Bao’an District, Shenzhen 518104, P.R.China Note: The test results relate only to the samples tested. This report shall not be reproduced in full, without the written approval of SUNWAY Testing Center. SHENZHEN SUNWAY COMMUNICATION CO.,LTD Report NO.: TS20130218001 Page 2 / 87 SAR Evaluation compliance Product Name: USB Modem Model Name: E618, E301, E302, E602, E603, E608, E613, E616, E617, E618, W801, W802, W803, W805, W806, W807, W808, W916, W917, W918, W928, WM72, WM31 Applicant: Shenzhen Tianjian Telecom Technology Co., Ltd Address: 22J Room, D Building Huaqiang Square, Huaqiang Road, Shenzhen, Guangdong, China Manufacturer: Shenzhen Tianjian Telecom Technology Co., Ltd Address: 22J Room, D Building Huaqiang Square, Huaqiang Road, Shenzhen, Guangdong, China Applicable Standard: FCC Oet65 Supplement C June 2001 IEEE Std. 1528-2003,47CFR§2.1093 Test Guidance KDB 447498 D01 General RF Exposure Guidance v05 KDB 447498 D02 SAR Procedures for Dongle Xmtr v02 KDB 941225 D01 SAR test for 3G devices v02 KDB 865664 D01 SAR measurement 100 MHz to 6 GHz v01 Test Result: Max. SAR Measurement (1g) Body: 1.134 mW/kg Performed Date: 1 st Feb. 2013 Test Engineer: Andy Wu Reviewed By Sky Song Performed Location: Shenzhen Sunway Communication CO.,LTD Testing Center Address:Building 9, Changxing High-tech Industrial Park, Wan’an Road, Shajing Town, Bao’an District, Shenzhen 518104, P.R.China Tel: +86-755- 81773388 Fax: +86-755- 81773335 SHENZHEN SUNWAY COMMUNICATION CO.,LTD Report NO.: TS20130218001 Page 3 / 87 TABLE OF CONTENS 1. General Information: .......................................................................................................... 4 1.1 EUT Description: ............................................................................................................. 4 1.2 Test Environment: ...........................................................................................................5 2. SAR Measurement System: ............................................................................................... 6 2.1 Dasy4 System Description: ............................................................................................. 6 3. System Components:......................................................................................................... 7 4. Tissue Simulating Liquid ................................................................................................... 9 4.1 The composition of the tissue simulating liquid: .............................................................. 9 4.2 Tissue Calibration Result:................................................................................................ 9 4.3 Tissue Dielectric Parameters for Head and Body Phantoms:........................................ 10 5. SAR System Validation .................................................................................................... 11 5.1 Validation System:.........................................................................................................11 5.2 Validation Dipoles:.........................................................................................................11 5.3 Validation Result: ..........................................................................................................12 6. SAR Evaluation Procedures: ........................................................................................... 13 7. SAR Exposure Limits ....................................................................................................... 14 8. Measurement Uncertainty:............................................................................................... 15 9. Conducted Power Measurement: .................................................................................... 17 10. Test photos and results: ................................................................................................ 19 10.1 DUT photos: ................................................................................................................19 10.2 Setup photos: ..............................................................................................................22 10.3 SAR result summary:................................................................................................... 25 10.4 Scale SAR result: ........................................................................................................ 26 11. Equipment List:............................................................................................................... 27 Appendix A. System validation plots:................................................................................. 28 Appendix B. SAR Test plots: ............................................................................................... 30 Appendix C. Probe Calibration Data: .................................................................................. 54 Appendix D. DAE Calibration Data:..................................................................................... 65 Appendix E. Dipole Calibration Data: ................................................................................. 71 SHENZHEN SUNWAY COMMUNICATION CO.,LTD Report NO.: TS20130218001 Page 4 / 87 1.…

Text truncated - open the document above for the full version.

Global United Technology Services Co., Ltd. Report No.: GTSE13010005401 Authorized Signature: Robinson Lo Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the GTS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of GTS International Electrical Approvals or testing done by GTS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by GTS International Electrical Approvals in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover Page FCC REPORT Applicant: Shenzhen Tianjian Telecom Technology Co., Ltd Address of Applicant: 22J Room, D Building Huaqiang Square, Huaqiang Road, Shenzhen, Guangdong, China Equipment Under Test (EUT) Product Name: USB Modem Model No.: E618, E301, E302, E602, E603, E608, E613, E616, E617, W801, W802, W803, W805, W806, W807, W808, W916, W917, W918, W928, WM72, WM31 FCC ID: RSZ-TJE618 Applicable standards: FCC CFR Title 47 Part 2: 2012 FCC CFR Title 47 Part22 Subpart H: 2012 FCC CFR Title 47 Part24 Subpart E: 2012 Date of sample receipt: January 22, 2013 Date of Test: January 23-31, 2013 Date of report issued: February 04, 2013 Test Result : Pass * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTSE13010005401 Global United Technology Services Co., Ltd. Project No.: GTSE130100054RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 48 2 Version Version No. Date Description 00 February 04, 2013 Original Prepared By: Date: February 04, 2013 Project Engineer Check By: Date: February 04, 2013 Reviewer Report No.: GTSE13010005401 Global United Technology Services Co., Ltd. Project No.: GTSE130100054RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 48 3 Contents Page 1 COVER PAGE .......................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 CLIENT INFORMATION............................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF EUT ........................................................................................................... 5 5.3 RELATED SUBMITTAL(S) / GRANT (S) ..................................................................................................... 5 5.4 TEST METHODOLOGY............................................................................................................................ 5 5.5 TEST FACILITY...................................................................................................................................... 6 5.6 TEST LOCATION.................................................................................................................................... 6 6 TEST INSTRUMENTS LIST ..................................................................................................................... 7 7 SYSTEM TEST CONFIGURATION ......................................................................................................... 8 7.1 EUT CONFIGURATION........................................................................................................................... 8 7.2 EUT EXERCISE..................................................................................................................................... 8 7.3 CONFIGURATION OF TESTED SYSTEM.................................................................................................... 8 7.4 DESCRIPTION OF TEST MODES ..................................................................................................... 8 8 MEASUREMETN RESULUTS ............................................................................................................... 10 8.1 CONDUCTED OUTPUT POWER .................................................................................................... 10 8.2 EFFECTIVE RADIATED POWER AND EFFECTIVE ISOTROPIC RADIATED POWER........................................ 11 8.3 OCCUPIED BANDWIDTH AND 26DB BANDWIDTH.................................................................................... 13 8.4 BAND EDGE...............................................................................…

Text truncated - open the document above for the full version.

Report No.: GTSE13010005401 Global United Technology Services Co., Ltd. Project No.: GTSE130100054RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 44 of 48 9 Test Setup Photo Radiated Emission (below 1GHz) Radiated Emission (above 1GHz) Report No: GTSE11040020501 Global United Technology Services Co., Ltd. Project No.: GTSE110400205IT 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 45 of 48 Conducted Emission