RTX-CM9628G2.4G wireless Laser mouse

Installing the Batteries Wireless Keyboard and mouse use two AAA alkaline batteries, Installing Batteries in the Mouse Step1.Open the battery compartment. Step2. Insert the batteries as shown inside the battery compartment. Step3. Replace the cover. Install the batteries in the ke yboard Step1. Remove the battery compartment cover on the bottom of the keyboard by squeezing the cover in from the tab to release it. Step2. Insert the batteries as shown inside the battery compartment. Step3. Replace the cover. Connecting the Nano Receiver Step1. Switch on your computer and connect the nano receiver to a free USB port. Step2. Windows detects the USB receiver and installs it for use with the operating syetem Step3 Smart-Link technology means that the mouse can be used immediately. DPI Switching Simu ltaaneously press and hold the left and right mouse buttons for 5 seconds in order to switch the sensitivity between 800 and 1600dpi The higher the DPI number, the more precise the scanning is and the quic ker the cursor will move in response to the same mouse movement. Power Saving Mode The mouse automatically switches to power-sa vingmode when it is not moved for 13 minutes Press the left or right to reactivate the mouse. Storing the Nano Rece iver If neessary,the receiver can also be conveniently stored in the storage slot on the bottom of mouse. Functionality Problems If the mouse or keyboard do not function as expected,ensure that you have carefulky checked the follo wing 1.The batteries are new and bave been inserted correctly 2.The receiver is correctly connected to the computer 3.The receiver and the devices are with in their communication range(max.8m,depending on local cond ito ns) Hotkeys on the keyboard The keyboard have 5 hotkeys located on the top of the keyboard and 3D scroll whee l. Mu ltimed ia h otkeys Play/Pause Th is mu lt imed ia hotkey are pro grammab le. Mu tevlume upvolume down This volume control keys are by volume scroll controller www stop Charge theBatteryinMouseorKeyboard. Your mouse and keyboard use Two AAA size Ni-MH rechargeable Battery. Before you use the mouse or keyboard, you need to place the mouse or keyboard on the stand to charge the Battery for 10 hours. This is very important to battery life. Please make sure the charge indicator is light ON when you charge the mouse. When you feel your wireless mouse or keyboard is not working smoothly, that means that the batteries need to be recharged. Please put the mouse or keyboard on the stand for charging. Normally it will take 8 hours to get the Battery fully charged. Place the mouse one the stand and make sure the charging indicator is light ON. CAUTION: Some computer will turn off the power of USB port when entering sleep mode. In this case, the battery inside the mouse or keyboard can not be charged. So you are requested to keep your computer always ON when you charge the mouse or keyboard Wa r ning 1:Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment 2:This equipment has been tested and found to comply with the limits for a Class B digital device, purs uant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harm ful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or m ore of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Model: CM9628 CK101G Instruction Manual RF Keyboard & Optical Mouse CAUTION: To use this device properly, please read the user’s guide before installation. Receriver 3')SGI)DFWRU\ ZZZILQHSULQWFQ This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, D Block, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Website: www.china.intertek-etlsemko.com 5 August, 2011 Comat Electronic (Shenzhen) Co., Ltd No.2 Lane 1, Xin'an 3rd 28 District Baoan Shenzhen, Guangdong, China Dear Xiaowen Zhang : Enclosed you will find your file copy of a Part 15 Certification (FCC ID: RTX- CM9628G). For your reference, TCB will normally take another 5 days for reviewing the report. Approval will then be granted when no query is sorted. Please contact me if you have any questions regarding the enclosed material. Sincerely, Shawn Xing Manager Enclosure • The test results reported in this test report shall refer only to the sample actually tested and shall not refer or be deemed to refer to bulk from which such a sample may be said to have been obtained. • This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results referenced from this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. • For Terms And Conditions of the services, it can be provided upon request. • The evaluation data of the report will be kept for 3 years from the date of issuance. TRF No.: FCC 15C_Txa FCC ID: RTX-CM9628G Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, D Block, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Website: www.china.intertek-etlsemko.com Comat Electronic (Shenzhen) Co., Ltd Application For Certification (FCC ID: RTX-CM9628G) 2.4G Wireless Laser Mouse Model: CM9628G 2.4GHz Transceiver We hereby certify that the sample of the above item is considered to comply with the requirements of FCC Part 15, Subpart C for Intentional Radiator, Mention 47 CFR [ 10-1-10] SZ11070227-2 Billy Li 5 August, 2011 INTERTEK TESTING SERVICES TRF No.: FCC 15C_TXa FCC ID: RTX-CM9628G i LIST OF EXHIBITS INTRODUCTION EXHIBIT 1: General Description EXHIBIT 2: System Test Configuration EXHIBIT 3: Emission Results EXHIBIT 4: Equipment Photographs EXHIBIT 5: Product Labelling EXHIBIT 6: Technical Specifications EXHIBIT 7: Instruction Manual EXHIBIT 8: Miscellaneous Information EXHIBIT 9: Confidentiality Request EXHIBIT 10: Test Equipment List INTERTEK TESTING SERVICES TRF No.: FCC 15C_TXa FCC ID: RTX-CM9628G ii MEASUREMENT/TECHNICAL REPORT Comat Electronic (Shenzhen) Co., Ltd - Model: CM9628G FCC ID: RTX-CM9628G 5 August, 2011 This report concerns (check one:) Original Grant X Class II Change Equipment Type: DXX - Part 15 Low Power Communication Device Transmitter Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart C for intentional radiator − the new 47 CFR [10-1-10 Edition] provision. Report prepared by: Shawn Xing Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, Block D, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Phone: (86 755) 8601 6288 Fax: (86 755) 8601 6751 INTERTEK TESTING SERVICES TRF No.: FCC 15C_TXa FCC ID: RTX-CM9628G iii Table of Contents 1.0 General Description ...............................................................................................2 1.1 Product Description................................................................................................2 1.2 Related Submittal(s) Grants...................................................................................2 1.3 Test Methodology...................................................................................................3 1.4 Test Facility ............................................................................................................3 2.0 System Test Configuration.....................................................................................5 2.1 Justification ............................................................................................................5 2.2 EUT Exercising Software .......................................................................................5 2.3 Special Accessories ...............................................................................................5 2.4 Equipment Modification..........................................................................................5 2.5 Measurement Uncertainty ......................................................................................5 2.6 Support Equipment List and Description................................................................6 3.0 Emission Results....................................................................................................8 3.1Radiated Test Results..................................................................... ...... 9 3.1.1 Field Strength Calculation ...................................................................................9 3.1.2 Radiated Emission Configuration Photograph ..................................................10 3.1.3 Radiated Emissions ............................................…

Text truncated - open the document above for the full version.