RY5AJ-65CBLUETOOTH SPEAKER

Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ●Reorient or relocate the receiving antenna. ●Increase the separation between the equipment and receiver. ●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ●Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this device not expressly approved by Shenzhen Hejiaxing Electronics Co.,Ltd may void the FCC authorization to operate this device. Note: The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

Shenzhen Hejiaxing Electronics Co., Ltd Floor 2, Build 1, Dongzhijia Industry Park, Lezhujiao Village, Xixiang Town, Baoan District, Guangdong Provice, Shenzhen City, China TEL: 86-755-29785582 FAX: 86-755-29504268 Rev 11/20/07 Confidentiality Letter Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: RY5AJ-65C. Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram Block Diagram.pdf Schematics Schematics.pdf Operation Description Operation Description.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Gong Qing Wei /Manager

Shenzhen Hejiaxing Electronics Co., Ltd Floor 2, Build 1, Dongzhijia Industry Park, Lezhujiao Village, Xixiang Town, Baoan District, Guangdong Provice, Shenzhen City, China TEL: 86-755-29785582 FAX: 86-755-29504268 AGENCY AUTHORIZATION LETTER FCC ID: RY5AJ-65C Date: May 05, 2014 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: We, the undersigned, hereby authorize Shenzhen CTL Testing Technology Co., Ltd.(MR. Tracy Qi) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Shenzhen CTL Testing Technology Co., Ltd. (MR. Tracy Qi) on our behalf shall have the same effect as acts of our own. This authorization expires on May 0 4, 2015. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Shenzhen Hejiaxing Electronics Co.,Ltd are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Gong Qing Wei /Manager

Shenzhen Hejiaxing Electronics Co.,Ltd Floor 2, Build 1, Dongzhijia Industry Park, Lezhujiao Village, Xixiang Town, Baoan District, Guangdong Provice, Shenzhen City, China TEL: 86-755-29785582 FAX: 86-755-29504268 USB Port Statement FCC ID: RY5AJ-65C Date: May 05, 2014 To whom it may concern: We, the undersigned, state that the device's (Model: AJ-65C) USB port only used for charge, no any data transfer to PC. Sincerely, Gong Qing Wei/General Manager

FCC ID Label Information 1. Label location: 2. FCC ID Label: Shenzhen Hejiaxing Electronics Co., Ltd Bluetooth Speaker Model: AJ-65C FCC ID: RY5AJ-65C This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Shenzhen CTL Testing Technology Co., Ltd. Tel: +86-755-89486194 Fax: +86-755-26636041 FCC PART 15 SUBPART C TEST REPORT FCC Part 15.249 Report Reference No......................: CTL1404140712-WF Compiled by ( position+printed name+signature)..: File administrators Jacky Chen Name of the organization performing the tests ( position+printed name+signature)..: Test Engineer Tracy Qi Approved by ( position+printed name+signature)..: Manager Tracy Qi Date of issue.....................................: Sept. 29, 2014 Test Firm..........................................: Shenzhen CTL Testing Technology Co., Ltd. Address.............................................: Floor 1-A, Baisha Technology Park, No. 3011, Shahexi Road, Nanshan, Shenzhen 518055 China. Applicant’s name............................: Shenzhen Hejiaxing Electronics Co.,Ltd Address.............................................: Floor 2, Build 1, Dongzhijia Industry Park, Lezhujiao Village, Xixiang Town, Baoan District, Guangdong Provice, Shenzhen City, China Test specification: Standard ...........................................: FCC Part 15.249: Operation within the bands 920-928 MHz, 2400- 2483.5 MHz, 5725-5850 MHz and 24.0 - 24.25 GHz. TRF Originator ..................................: Shenzhen CTL Testing Technology Co., Ltd. Master TRF.......................................: Dated 2011-01 Shenzhen CTL Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .................... : Bluetooth Speaker Trade Mark .......................................: N/A Models/Type reference.....................: AJ-65C Modulation .......................................: FHSS Work Frequency...........................: 2402 MHz~2480 MHz Antenna Type..............................: internal FCC ID .............................................: RY5AJ-65C Result................................................: Positive V1.0 Page 2 of 33 Report No.: CTL1404140712-WF T E S T R E P O R T Test Report No. : CTL1404140712-WF Sept. 29, 2014 ______________________________________________________________________________________________ Date of issue Equipment under Test : Bluetooth Speaker Model /Type : AJ-65C Applicant : Shenzhen Hejiaxing Electronics Co.,Ltd Address : Floor 2, Build 1, Dongzhijia Industry Park, Lezhujiao Village, Xixiang Town, Baoan District, Guangdong Provice, Shenzhen City, China Manufacturer Shenzhen Hejiaxing Electronics Co.,Ltd Address Floor 2, Build 1, Dongzhijia Industry Park, Lezhujiao Village, Xixiang Town, Baoan District, Guangdong Provice, Shenzhen City, China Test Result according to the standards on page 4: Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. V1.0 Page 3 of 33 Report No.: CTL1404140712-WF Contents 1 . TEST STANDARDS.......................................................................4 2 . SUMMARY...................................................................................5 2.1. General Remarks .........................................................................................................................................5 2.2. Equipment Under Test ................................................................................................................................5 2.3. Short description of the Equipment under Test (EUT) ............................................................................5 2.4. EUT operation mode ...................................................................................................................................6 2.5. EUT configuration .......................................................................................................................................6 2.6. Related Submittal(s) / Grant (s)..................................................................................................................6 2.7. Modifications ...............................................................................................................................................6 3 . TEST ENVIRONMENT ....................................................................7 3.1. Address of the test laboratory ...................................................................................................................7 3.2. Test Facility ..................................................................................................................................................7 3.3. Environmental conditions ..........................................................................................................................7 3.4. Configuration of Tested System ................................................................................................................7 3.5. Statement of the measurement uncertainty .............................................................................................8 3.6. Equipments Used during the Test .............................................................................................................9 4 . TEST CONDITIONS AND RESULTS ..................................................9 4.1. Conducted Emissions Test ......................................................................................................................10 4.2. Radiated Emission Test ............................................................................................................................13 4.3. Band Edge Measurement.........................…

Text truncated - open the document above for the full version.