RYAK2000100Kolombo K-2000

OWNER`S MANUAL Preliminary 2 The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. PRODUCTS RANGE K-1000 K-2000 Kolombo Technologies Ltd Model No.: K-2000 IC: 4985A-K2000100 IC: 4214A-9XTREAM FCC ID: RYAK2000100 FCC IC: OUR9XTREAM * This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Made in Canada Preliminary 3 Introduction __________________________________________________________________4 About this owner`s manual ______________________________________________________5 K-1000 operational functions ____________________________________________________5 Disarming the system ______________________________________________________________ 5 Rearming the system_______________________________________________________________ 5 Engaging valet mode** _____________________________________________________________ 5 Disengaging valet mode ____________________________________________________________ 5 Key chain’s battery ________________________________________________________________ 6 K-2000 operational functions (car module) _________________________________________6 Disarming the system ______________________________________________________________ 6 Rearming the system_______________________________________________________________ 6 Engaging valet mode** _____________________________________________________________ 6 Disengaging valet mode ____________________________________________________________ 7 Key chain’s battery ________________________________________________________________ 7 K-2000 operational functions (modem module) ______________________________________7 General informations ___________________________________________________________7 Key chain ________________________________________________________________________ 7 Maintenance _____________________________________________________________________ 7 Installing the system in a new car ____________________________________________________ 7 Concept of secured area ____________________________________________________________ 8 Information to user ____________________________________________________________8 Warranty _____________________________________________________________________9 Preliminary 4 Introduction Kolombo Technologies Ltd is proud to present a new way to prevent the robbery of your car. The unique design of the K series allows the security system to be installed anywhere in your car. This system is absolutely undetectable and its keys cannot be copied. Kolombo’s security system is interactive and you are always aware of the status of your security system thanks to the audible interface. Even though, there is no visible evidence of the presence of a Kolombo system in your car, you will always be notified audibly by its presence. According to the level of protection requested, Kolombo offers a selection of product starting with the K-1000 version. This system will forbid any ignition of your car that is attempted without the presence of a valid encrypted key. The disabling of the vehicle is done by shutting down up to three electrical circuits. The electrical circuits will only be reactivated with a valid encrypted key. If a higher protection level is required, the K-2000 system is then, the solution. In addition to what the K-1000 is capable, the K-2000 offers transparent key holder identification and an R.F. communication link with your home or office module that buzzes if an alert is detected. This creates a made safe zone at your main residence or your place of work. In other words, you are warned within seconds that your car has been started illegally. Preliminary 5 About this owner`s manual This manual reports all operating steps of the K series systems and validates all the warranty coverage for every component. K-1000 operational functions Disarming the system Any start attempt of a car in any other way then the one explained herein will fail. Once you are ready to start your car, press the button on your keychain. The K-1000 will reply to you with a beep telling that a valid encrypted code has been received. If no beep has been heard, press the button on your keychain again until you hear the confirmation. After a valid identification, you have 15 seconds to start your engine. Rearming the system The return to an armed state of the system is always made automatically. The K-1000 confirms the rearming by producing two short buzzes. The rearming will happen in these situations: • If the allowed 15 seconds to start your engine expires. • 30 seconds after you turned off your engine. Engaging valet mode** To put the system into the valet mode, the K-1000 has to receive three valid encrypted codes within 15 seconds. In other words, you have to activate your keychain to hear three confirmation’s beeps from the K-1000 within 15 seconds. The K-1000 confirms the state of valet mode by producing three short buzzes. Disengaging valet mode The next time you start your car with a valid encrypted code, the system will return in normal mode. The K-1000 will confirm the return to normal mode by producing three short buzzes. ** Caution: When in valet mode, your car can be started without a keychain. Preliminary 6 Keychain’s battery When your keychain’s battery is near the end, the K-1000 produces a warning sound every three minutes while the car is running to warn you that you have to change your battery. You will have at least 7 days to change your battery. To change the battery, remove the back of the keychain’s enclosure. You will see the battery in its support. Use a small screwdriver to pop out the battery and replace it. The battery type is CR2032. K-2000 operational functions (car module) Disarming the system Any start attempt of a …

Text truncated - open the document above for the full version.

3 March 2005 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Nemko Canada Inc., 303 River Road, Ottawa, Ontario, Canada to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Kolombo Technologies Ltd, 255 rue Fortin Suite 80, Vanier, Québec, Canada. Dated this 3 Day of March 20 05 Agency agreement expiration date: 3 March 2006 By: Frédéric Pichette Signature Printed Title: Director R&D On behalf of : Kolombo Technologies Ltd Telephone: (418) 686-3837

03 rd March 2005 Attn: Reviewing Engineer Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 RE: Confidentiality request for Kolombo K-2000, FCC ID: RYAK2000100 To whom it may concern: This letter serves as an official request for confidentiality under FCC Rule Section 0.459. We have requested that the schematic diagrams, operational diagrams, block diagrams, parts list and PCB layouts required to be submitted with this application be withheld from public review. This unit is part of a patent pending security system for car and all documents are company proprietary information that could never get into the possession of our competition. The company is also in a process to become public with external investors. Please contact me if there is any information you may need. Sincerely, 03 rd March 2005 Frederic Pichette Director of R&D

Kolombo Technologies Ltd Model No.: K-2000 IC: 4985A-K2000100 Contains IC: 4214A-9XSTREAM FCC ID: RYAK2000100 Contains FCC ID: OUR9XSTREAM * This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Made in Canada

Master: PT15209 Date: December 12, 2001 Test Report: 4W08005.4 Issue 2 Applicant: Kolombo Technologies Ltd 255 Fotin Suite 80 Vanier, Québec G1M 3M2 Equipment Under Test: K-2000 (EUT) 128.5KHz Low PowerTransmitter In Accordance With: FCC Part 15, Subpart C, 15.209 FCC I.D. : RYAK2ØØØ1ØØ Tested By: Nemko Canada Inc. 303 River Road, R.R. 5 Ottawa, Ontario K1V 1H2 Authorized By: Sim Jagpal, Resource Manager Date: 23 March 2005 Total Number of Pages: 10 Nemko Canada Inc. FCC PART 15, SUBPART C, 15.209 PROJECT NO.: 4W08005.4 Issue 2 EQUIPMENT: K-2000 Page 2 of 10 Table Of Contents Section 1. Summary Of Test Results ..................................................................................3 Section 2. General Equipment Specification......................................................................5 Section 3. Radiated Emissions .............................................................................................6 Section 4. Block Diagrams ...................................................................................................9 Section 5. Test Equipment List .........................................................................................10 Nemko Canada Inc. FCC PART 15, SUBPART C, 15.209 PROJECT NO.: 4W08005.4 Issue 2 EQUIPMENT: K-2000 Page 3 of 10 Section 1. Summary Of Test Results General All measurements are traceable to national standards. These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with FCC Part 15, Subpart C for low power devices. All tests were conducted using measurement procedure ANSI C63.4-1992. Radiated Emissions were made on an open area test site. A description of the test facility in on file with the FCC. THIS TEST REPORT RELATES ONLY TO THE ITEM(S) TESTED. THE FOLLOWING DEVIATIONS FROM, ADDITIONS TO, OR EXCLUSIONS FROM THE TEST SPECIFICATIONS HAVE BEEN MADE. See “ Summary of Test Data”. TESTED BY: Daxesh Thakker, Wireless Test Engineer DATE: _March 30, 2004 Nemko Canada Inc. authorizes the above named company to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. This report applies only to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation Nemko Canada Inc. FCC PART 15, SUBPART C, 15.209 PROJECT NO.: 4W08005.4 Issue 2 EQUIPMENT: K-2000 Page 4 of 10 Summary Of Test Data Name Of Test Para. No. Result Powerline Conducted Emissions 15.207 N/A Radiated Emissions 15.209 Complies Footnotes For N/A’s: • This device is powered by a 12 Vdc battery. Test Conditions: Indoor Temperature: 24 °C Humidity: 23 % Outdoor Temperature: 16 °C Humidity: 36 % Nemko Canada Inc. FCC PART 15, SUBPART C, 15.209 PROJECT NO.: 4W08005.4 Issue 2 EQUIPMENT: K-2000 Page 5 of 10 Section 2. General Equipment Specification Manufacturer: M2S Electronics 2855 rue De Celles Québec, Québec G2C 1K7 Canada Model No.: K-2000 Serial No.: None Date Received In Laboratory: 19 March 2004 Nemko Identification No.: #2, #3 Frequency: 128.5 kHz Fixed Modulation: Pulsed signal, no modulation and no data Emission Designator: P0N Nemko Canada Inc. FCC PART 15, SUBPART C, 15.209 PROJECT NO.: 4W08005.4 Issue 2 EQUIPMENT: K-2000 Page 6 of 10 Section 3. Radiated Emissions Para. No.: 15.209 Test Performed By: Daxesh Thakker Date of Test: 29 March 2004 Minimum Standard: Fundamental (MHz) Field Strength (μV/m) Field Strength (dBμV) 0.009 - 0.490 2400/F(kHz) @ 300m — 0.490 - 1.705 24000/F(kHz) @ 30m — 1.705 - 30 30 @ 30m — 30 - 88 100 40.0 88 - 216 150 43.5 216 - 960 200 46.0 Above 960 500 54.0 Test Results: Complies. Measurement Data: See attached table. Nemko Canada Inc. FCC PART 15, SUBPART C, 15.209 PROJECT NO.: 4W08005.4 Issue 2 EQUIPMENT: K-2000 Page 7 of 10 Test Data - Radiated Emissions Frequency of Emission (MHz) Received Signal (dBuV/m@3m) Extrapolated Signal (dBuV/m@300m ) Limit (dBuV/m@300m ) Margin (dB) 0.1285 68.5 -11.5 25.42 36.92 0.257 51.2 -28.8 19.4 48.2 0.3855 40 -40 15.87 55.87 Frequency of Emission (MHz) Received Signal (dBuV/m@3m) Extrapolated Signal (dBuV/m@30m) Limit (dBuV/m@30m) Margin (dB) 0.514 33 -7 33.4 40.4 Notes: Field strength emissions were measured at 3 m due to the very low power of the device. All emissions measured were extrapolated using 40 dB/decade extrapolation factor. All harmonic and spurious emissions were searched up to the 10 th harmonic. The EUT was tested on all three orthogonal axes and the worst case data presented here. The loop antenna was rotated 0 to 360 degrees to search highest emissions. Measurement equipment setup was 200Hz peak detector for measurements below 30MHz. The EUT was tested with new fresh battery. Nemko Canada Inc. FCC PART 15, SUBPART C, 15.209 PROJECT NO.: 4W08005.4 Issue 2 EQUIPMENT: K-2000 Page 8 of 10 Radiated Emissions- Photographs Nemko Canada Inc. FCC PART 15, SUBPART C, 15.209 PROJECT NO.: 4W08005.4 Issue 2 EQUIPMENT: K-2000 Page 9 of 10 Section 4. Block Diagrams Radiated Prescan SPECTRUM ANALYZER AND PLOTTER OR TEST RECEIVER COMPUTER ANTENNA EUT SHIELDED ROOM Test Site For Radiated Emissions Measurement distance at 3m, fundamental and harmonics, due to the very low power of this device. EUT Distance As Per Measurement Data Variable 2 to 10m Active Loop Antenna 80cm 80cm Non-Conducting Turntable Nemko Canada Inc. FCC PART 15, SUBPART C, 15.209 PROJECT NO.: 4W08005.4 Issue 2 EQUIPMENT: K-2000 Page 10 of 10 Section 5. Test Equipment List CAL CYCLE EQUIPMENT MANUFACTURER MODE…

Text truncated - open the document above for the full version.

Nemko Canada Inc. FCC PART 15, SUBPART C, 15.209 PROJECT NO.: 4W08005.4 EQUIPMENT: K-2000 Page 8 of 10 Radiated Emissions- Photographs