S7A-SP14Bluetooth Mic & Intercom

| Bluetooth Mic & Intercom Bluetooth ® Mic & Intercom SENA www.sena.com User’s Guide | Bluetooth Mic & Intercom © 1998-2014 Sena Technologies Inc. All rights reserved. Sena Technologies Inc. reserves the right to make any changes and improvements to its product without prior notice. Sena™ is a trademark of Sena Technologies Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH10R™, SMH5™, SMH5-FM™, SPH10™, EXPAND™, SPH10H™, SPH10H-FM™, SPH10S™, SR10™, SR10i™, SM10™, GoPro ® Pack™, Bluetooth Mic & Intercom™ are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena. GoPro® is a registered trademark of Woodman Labs of San Mateo, California. Sena Technologies, Inc. (“Sena”) is not affiliated with Woodman Labs. The Sena Bluetooth Pack for GoPro® is an after- market accessory specially designed and manufactured by Sena Technologies, Inc. for the GoPro® Hero3 allowing for Bluetooth capabilities. The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Sena is under license. Other trademarks and tradenames are those of their respective owners. | Bluetooth Mic & Intercom CONTENTS 1. INTRODUCTION 2. PACKAGE CONTENTS 3. GETTING STARTED 3.1 Installing the Bluetooth Mic & Intercom 3.1.1 Installing on the Armband 3.1.2 Installing on the Collar Clip 3.2 Connecting Your Headphones 3.3 Powering On/Off 3.4 Voice Prompt 3.5 Volume Adjustment 3.6 Using Internal/External Microphone 3.7 Function Priority 3.8 Charging 3.9 Low Battery Warning 3.10 Checking the Battery Level 3.10.1 LED Indicator 3.10.2 Voice Prompt Indicator 3.11 Fault Reset 4. BLUETOOTH MIC & INTERCOM CONFIGURATION SETTING 4.1 Mobile Phone Pairing 4.2 Multipoint Pairing 4.3 Phone Selective Pairing 4.4 Media Selective Pairing 4.5 Assigning Speed Dial 4.6 Enabling/Disabling Voice Prompts 4.7 Enabling/Disabling Sidetone 4.8 Auto Gain Control 4.9 Delete All Bluetooth Pairing Information 4.10 Reset to Factory Default Setting 4.11 Exit Voice Configuration Menu 5. PAIRING THE BLUETOOTH MIC & INTERCOM WITH BLUETOOTH DEVICES 5.1 Mobile Phone Pairing 5.2 Multipoint Pairing | Bluetooth Mic & Intercom 5.3 Bluetooth Stereo Device Pairing 5.4 Pairing with the Bluetooth Pack for GoPro® or PRISM 6. PAIRING WITH SELECTIVE PROFILE: HFP OR A2DP STEREO 6.1 Phone Selective Pairing: HFP for Phone Call Only 6.2 Media Selective Pairing: A2DP Stereo Music Only 7. STEREO MUSIC 8. MOBILE PHONE CALL MAKING AND ANSWERING 8.1 Mobile Phone Call Making and Answering 8.2 Speed Dialing 9. INTERCOM 9.1 Pairing with Other Bluetooth Mic & Intercom for Intercom Conversation 9.2 Pairing with Other Sena Headset Models for Intercom Conversation 9.3 Two-way Intercom 9.3.1 Start and End Two-way Intercom 9.3.2 Intercom and Mobile Phone Call 9.4 Three-way Conference Intercom 9.4.1 Start Three-way Intercom 9.4.2 End Three-way Intercom 9.4.3 Three-way Conference Phone Call with Intercom Participant 9.5 Four-way Conference Intercom 9.5.1 Start Four-way Intercom 9.5.2 End Four-way Intercom 9.6 Intercom Failure 9.7 Intercom Reconnection 10. UNIVERSAL INTERCOM 10.1 Universal Intercom Pairing 10.2 Two-way Universal Intercom 10.3 Three-way Universal Intercom 10.4 Four-way Universal Intercom 10.4.1 Four-way Universal Intercom Case 1 10.4.2 Four-way Universal Intercom Case 2 11. MUSIC SHARING 12. FIRMWARE UPGRADE 13. SENA BLUETOOTH CONNECTION CASE STUDIES 14. OPERATION QUICK REFERENCE CERTIFICATION AND SAFETY APPROVALS FCC Compliance Statement | Bluetooth Mic & Intercom FCC RF Exposure Statement FCC Caution CE Declaration of Conformity Industry Canada Statement Bluetooth License WEEE (Waste Electrical and Electronic Equipment ) SAFETY INFORMATION Product Storage and Management Product Use Battery PRODUCT WARRANTY AND DISCLAIMER Limited Warranty Warranty Exclusions Reasons for Limited Liabilities Limitation of Liability Liabilities Disclaimer Warranty Service Free-of-charge Service Charged Service Return for Full Refund | Bluetooth Mic & Intercom 1. INTRODUCTION Thank you for choosing the Sena Bluetooth Mic & Intercom. The Sena Bluetooth Mic & Intercom is an ultra-slim, light weight microphone that allows users to make an intercom call. It may function as a microphone when paired with the Sena Bluetooth Action Camera or Sena Bluetooth Audio Pack for GoPro®. It also works as a headset and intercom through the use of a pair of stetero headphones with a built-in microphone that users may have. As a Bluetooth microphone and intercom, it allows for voice recording to accompany videos as well as communicate with other Bluetooth intercom. The Sena Bluetooth Mic & Intercom allows for up to a four-way conference and features voice prompts for ease of use. The Bluetooth Mic & Intercom is compliant with the Bluetooth 3.0 supporting the following profiles: Headset Profile, Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), and Audio Video Remote Control Profile (AVRCP). Please check with the manufacturers of other devices to determine their compatibility with the Bluetooth Mic. Please read this user’s guide carefully before using the Bluetooth Mic. Also check www.sena.com for the latest version of the user’s guide and additional information related to Sena Bluetooth products. The Bluetooth Mic & Intercom features: ● Bluetooth microphone for Bluetooth-ready camera ● Ultra HD Voice Recording™ using Sena Bluetooth products ● Bluetooth intercom up to 500 meters (540 yards)* ● Four-way conference intercom ● Advanced Noise Control™ ● Multipoint Bluetooth for dual mobile phone ● Bluetooth stereo headset for Bluetooth audio devices such as MP3 players ● Bluetooth music playback control by AVRCP ● Bluetooth handsfree for Bluetooth mobile phones ● Voice prompts ● Crystal clear and natural sound quality ● Ultra-slim and feather light ● Durable, sweat and water resistant for active condition ● Up to 6 hours talk time, 6 days stand-by time ● Firmware upgradeable | Bluetooth M…

Text truncated - open the document above for the full version.

Sena Technologies, Inc. 210 Yangjae-dong Seocho-gu Seoul 137-130 orea Tel. +82-2-573-7772 Fax +82-2-573-7710 July 25, 2014 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 LETTER OF AUTHORIZATION To whom it may concern: We, the undersigned, hereby authorize LTA Co., Ltd., to act on our behalf in all manners relating to application for equipment authorization for FCC ID: S7A-SP14. including signing of all documents relating to these matters. Any and all acts carried out by LTA Co., Ltd., on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Sena Technologies, Inc. LTA Co.,LTD. (Contact Person) Contact name: Jae-Ho Lee Position: Manager Phone:(82)31-323-6008 E-mail: [email protected] SeungHyun, Kim / Associate Research Engineer Sena Technologies, Inc.

Sena Technologies, Inc. 210 Yangjae-dong Seocho-gu Seoul 137-130, Korea Tel. +82-2-573-7772 Fax +82-2-573-7710 July 25, 2014 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 In re : Sena Technologies, Inc. FCC ID : S7A-SP14 Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, Sena Technologies, Inc.. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give Sena Technologies, Inc.. temporary confidentiality of commercially sensitive information prior to product release. The requested Confidential and Temporary Confidential exhibits are listed as follows: Exhibit Type File Name CONFIDENTIAL Schematics CONF APPENDIX S7A-SP14 SCH DIA.pdf Parts list CONF APPENDIX S7A-SP14 PL.pdf Block diagram CONF APPENDIX S7A-SP14 BLK DIA.pdf Operational description CONF APPENDIX S7A-SP14 OpDes.pdf SHORT-TERM CONFIDENTIAL External Photos SHORT-TERM CONF S7A-SP14 EXT Photo.pdf Internal Photos SHORT-TERM CONF S7A-SP14 INT Photo.pdf Test-Setup Photos SHORT-TERM CONF S7A-SP14 Test Photo.pdf User’s Manual SHORT-TERM CONF S7A-SP14 Manual.pdf The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. SeungHyun, Kim / Associate Research Engineer Sena Technologies, Inc.

Sena Technologies, Inc. 210 Yangjae-dong Seocho-gu Seoul 137-130, Korea Tel. +82-2-573-7772 Fax +82-2-573-7710 July 25, 2014 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 In re : Sena Technologies, Inc. FCC Application for FCC ID: S7A-SP14 To Whom It May Concern: We, the undersigned, hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite filing. Regards, SeungHyun, Kim / Associate Research Engineer Sena Technologies, Inc.

FCC ID: S7A-SP14 IC: 8154A-SP14 Copyright ○ c 2014, LTA Co., Ltd. Page 1 of 3 Upper Lower FCC ID: S7A-SP14 IC: 8154A-SP14 Copyright ○ c 2014, LTA Co., Ltd. Page 2 of 3 Front Rear FCC ID: S7A-SP14 IC: 8154A-SP14 Copyright ○ c 2014, LTA Co., Ltd. Page 3 of 3 ANTENNA- M/N: SENA_009

FCC ID: S7A-SP14 IC : 8154A-SP14 Copyright Ⓒ 2014, LTA Co., Ltd. SAMPLE LABEL & LOCATION Model : BT10 FCC ID : S7A-SP14 IC : 8154A-SP14 CE : CE1177 KC : MSIP – CRM – SNA – SP14 Made in Korea Sena Technologies

FCC ID: S7A-SP14 IC: 8154A-SP14 Copyright ○ c 2014, LTA Co., Ltd. Page 1 of 2 Main Board – Front Main Board – Rear FCC ID: S7A-SP14 IC: 8154A-SP14 Copyright ○ c 2014, LTA Co., Ltd. Page 2 of 2 RF Module Total internal

FCC ID:S7A-SP14 ATTACHMENT IC : 8154A-SP14 * Standalone SAR test exclusion considerations - Min. transmitting frequency = 2441 MHz - Min. test separation distance = 5 mm -Max. Power with tune-up tolerance = 8.04 dBm = 6.37 mW (Measured power 7.54 dBm ± 0.5dB) Step 1) SAR Test exclusion thresholds for 100MHz to 6GHz at test separation distance ≤ 50 mm = Used [(max.power of channel, including tune-up torelance, mW)/(min. test separation distance, mm)] * [√f(GHz)] = [ 6.37/ 5 ] * [ √ 2.441 ] = 1.990 ≤ 3, for 1g SAR Thus, SAR for this device is not required. Step 2) SAR Test exclusion thresholds for 100MHz to 1500MHz at test separation distance > 50 mm = N/A [Threshold at 50mm in step 1) + (test separation distance - 50 mm) * (√f(MHz)/150] mW Step 3) SAR Test exclusion thresholds for 1500MHz to 6GHz at test separation distance > 50 mm = N/A [Threshold at 50mm in step 1) + (test separation distance - 50 mm) * 10] mW

Ref. No.: LR500111407D Copyright ○ c 2014, LTA Co., Ltd. Page 1 of 42 243 Jubug-Ri,Yangji-Myeon, Yongin-Si, Gyeonggi-Do, Korea 449-822 Tel: +82-31-323-6008 Fax: +82-31-323-6010 http://www.ltalab.com Dates of Tests : July 03 ~ July 25, 2014 Test Report S/N: LR500111407D Test Site : LTA CO., LTD. CERTIFICATION OF COMPLIANCE FCC ID IC APPLICANT Equipment Class : Part 15 Spread Spectrum Transmitter (DSS) Manufacturing Description : Bluetooth Mic & Intercom Manufacturer : Sena Technologies, Inc. Model name : BT10 Test Device Serial No.: : Identical prototype Rule Part(s) : FCC Part 15.247 Subpart C; ANSI C-63.4-2009 Frequency Range : 2402 ~ 2480MHz RF power : Max 7.54 dBm – Conducted Data of issue : July 28, 2014 This test report is issued under the authority of: The test was supervised by: Jae-Ho Lee, Manager Joon-Young Jeon, Test Engineer This test result only responds to the tested sample. It is not allowed to copy this report even partly without the allowance of the test laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. NVLAP LAB Code.: 200723-0 S7A-SP14 8154A-SP14 Sena Technologies, Inc. Ref. No.: LR500111407D Copyright ○ c 2014, LTA Co., Ltd. Page 2 of 42 TABLE OF CONTENTS 1. GENERAL INFORMATION ---------------------------------------------------------------------------- 2. INFORMATION ABOUT TEST ITEM --------------------------------------------------------------- 3. TEST REPORT --------------------------------------------------------------------------------------------- 3.1 SUMMARY OF TESTS ------------------------------------------------------------------------------ 3.2 FREQUENCY HOPPING SYSTEM REQUIREMENTS-------------------------------------------- 3.3 TECHNICAL CHARACTERISTICS TEST ------------------------------------------------------- 3.3.1 CARRIER FREQUENCY SEPARATION ---------------------------------------------------- 3.3.2 NUMBER OF HOPPING FREQUENCIES -------------------------------------------------- 3.3.3 20 dB BANDWIDTH ---------------------------------------------------------------------------- 3.3.4 TIME OF OCCUPANCY (Dwell Time) ------------------------------------------------------- 3.3.5 TRANSMITTER OUTPUT POWER ---------------------------------------------------------- 3.3.6 BAND EDGE ------------------------------------------------------------------------------------- 3.3.7 CONDUCTED SPURIOUS EMISSIONS ----------------------------------------------------- 3.3.8 RADIATED SPURIOUS EMISSIONS ------------------------------------------------------- 3.3.9 AC CONDUCTED EMISSIONS --------------------------------------------------------------- APPENDIX APPENDIX TEST EQUIPMENT USED FOR TESTS -------------------------------------------- 3 4 5 5 6 8 8 10 12 19 24 28 31 34 38 41 Ref. No.: LR500111407D Copyright ○ c 2014, LTA Co., Ltd. Page 3 of 42 1. General information 1-1 Test Performed Company name : LTA Co., Ltd. Address : 243, Jubug-ri,Yangji-Myeon,Youngin-Si, Kyunggi-Do, Korea. 449-822 Web site : http://www.ltalab.com E-mail : [email protected] Telephone : +82-31-323-6008 Facsimile : +82-31-323-6010 Quality control in the testing laboratory is implemented as per ISO/IEC 17025 which is the “General requirements for the competents of calibration and testing laboratory”. 1-2 Accredited agencies LTA Co., Ltd. is approved to perform EMC testing by the following agencies: Agency Country Accreditation No. Validity Reference NVLAP U.S.A 200723-0 2014-09-30 ECT accredited Lab. RRA KOREA KR0049 2015-03-06 EMC accredited Lab. FCC U.S.A 610755 2017-04-21 FCC filing FCC U.S.A 649054 2015-04-17 FCC CAB VCCI JAPAN R2133(10 m), C2307 2017-06-21 VCCI registration VCCI JAPAN T-2009 2016-12-23 VCCI registration VCCI JAPAN G-563 2015-05-28 VCCI registration IC CANADA 5799A-1 2015-06-21 IC filing KOLAS KOREA NO.551 2017-01-08 KOLAS accredited Lab. Ref. No.: LR500111407D Copyright ○ c 2014, LTA Co., Ltd. Page 4 of 42 2. Information about test item 2-1 Client & Manufacturer Company name : Sena Technologies, Inc. Address Telephone / Facsimile : : 210 Yangjae-dong Seocho-gu Seoul 137-130 Korea Tel : +82-2-573-7772 / Fax : +82-2-573-7710 2-2 Equipment Under Test (EUT) Trade name : SENA Model name : BT10 Serial number : Identical prototype Date of receipt : July 01, 2014 EUT condition : Pre-production, not damaged Antenna type : Chip antenna (M/N:SENA_009) Max Gain 0.5 dBi Frequency Range : 2402 ~ 2480MHz RF output power : Max. 7.54 dBm – Conducted Number of channels : 79 Duty cycle : 80.79 % Channel spacing : 1MHz Channel Access Protocol : Frequency Hopping Spread Spectrum (FHSS) Type of Modulation : Basic Mode(GFSK), EDR Mode(Pi/4 DQPSK, 8DPSK) Power Source : DC 3.7V by battery Firmware Version : V1.0.0 2-3 Tested frequency Bluetooth LOW MID HIGH Frequency (MHz) 2402 2441 2480 2-4 Ancillary Equipment Equipment Model No. Serial No. Manufacturer - - - - Ref. No.: LR500111407D Copyright ○ c 2014, LTA Co., Ltd. Page 5 of 42 3. Test Report 3.1 Summary of tests FCC Part Section(s) Parameter Limit Test Condition Status (note 1) 15.247(a) Carrier Frequency Separation ≥ 2/3 of 20dB BW Conducted C 15.247(a) Number of Hopping Frequencies ≥ 15 channels C 15.247(a) 20 dB Bandwidth 99% Bandwidth − C 15.247(a) Dwell Time ≤ 0.4 seconds C 15.247(b) Transmitter Output Power ≤ 1W for 1Mbps ≤ 125mW for 2,3Mbps C 15.247(d) Conducted Spurious emission > 20 dBc C 15.247(d) Band Edge > 20 dBc C 15.249 / 15.209 Field Strength of Harmonics < 54 dBuV (at 3m) Radiated C 15.109 Field Strength − C 15.207 /15.107 AC Conducted Emissions EN 55022 Line Conducted C 15.203 Antenna requirement − − C Note 1: C=Complies NC=Not Complies NT=Not Tested NA=Not Applicable Note 2: The data in this test report are traceable to the national or international standards. Note 1: Antenna Requirement  The Sena Technologies, Inc. , FCC ID: S7A-SP14 unit complies with the requirement of §15.203. The antenna type is chip antenna. Not…

Text truncated - open the document above for the full version.

FCC ID: S7A-SP14 IC: 8154A-SP14 Copyright ○ c 2014, LTA Co., Ltd. Page 1 of 4 Radiate Emission (9kHz ~ 30MHz) FCC ID: S7A-SP14 IC: 8154A-SP14 Copyright ○ c 2014, LTA Co., Ltd. Page 2 of 4 Radiate Emission (30MHz ~ 1GHz) FCC ID: S7A-SP14 IC: 8154A-SP14 Copyright ○ c 2014, LTA Co., Ltd. Page 3 of 4 Radiate Emission (Above 1GHz) FCC ID: S7A-SP14 IC: 8154A-SP14 Copyright ○ c 2014, LTA Co., Ltd. Page 4 of 4 Conducted Emission