S7A-SP95WiFi Adapter

12 Sena WiFi Adapter for 50 Series Quick Start Guide 2.0.0 ENGLISH USB-C Connector USB Connector Factory Reset Button LED Indicators 2 Sena 50 Utility App • Download the Sena 50 Utility App to set up the WiFi Adapter to automatically upgrade your main unit. Android: Google Play Store > ‘Sena 50 Utility’ iOS: App Store > ‘Sena 50 Utility’ • Save time updating the firmware on the main unit with the Sena 50 Utility App and enjoy your adventure even more! Connection Setup 1. Open the Sena 50 Utility App. 2. Click the top left Menu button and select the “WiFi Adapter” menu. 3. Follow the instructions on the Sena 50 Utility App to connect the WiFi Adapter to a WiFi access point. Note: To change the WiFi access point, perform the Factory Reset then repeat the steps above. 3 Upgrading the Firmware of the Main Unit The firmware will be upgraded automatically while your main unit is charging. If you want to manually upgrade the firmware, change the setting on the Sena 50 Utility App. Note: Do not disconnect the WiFi Adapter while upgrading the firmware. The product may be damaged. LED Description Charging Status Firmware Upgrade Status WiFi Status 4 Charging Status Disconnected Charging (The main unit is powered off.) Fully charged Note: Charging ( The main unit is powered on.) To upgrade the firmware, power off the main unit . Firmware Upgrade Status Disconnected or no firmware upgrade available Upgrading firmware Firmware upgrade completed WiFi Status Disconnected from an WiFi access point Searching for WiFi access point Connected to an access point 5 Powering On Insert the USB Connector into a USB charger port that is connected to a power source. Note: 1. Any 3rd party USB charger (5 V/1 A) can be used with WiFi Adapter if the charger is approved by either the FCC, CE, IC or other locally approved. 2. Do not connect the WiFi Adapter to a USB port on your PC. Connecting to the Main Unit Insert the USB-C Connector into the main unit’s USB-C port. Note: If you leave the main unit on when connecting it, the charging LED on the WiFi Adapter will blink red slowly. 5 Sena Technologies, Inc. Customer Support: sena.com Factory Reset If you want to restore the WiFi Adapter to the factory default settings, you can easily reset the unit: 1. Gently insert a paperclip into the pinhole on the back of the unit and lightly press the Factory Reset Button. 2. The WiFi Adapter will automatically restart with the three LEDs on. Note: The WiFi Adapter will be restored to factory default settings which include the WiFi configuration setup, the firmware setup and the language setup. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. IC Caution: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class [B] digital apparatus complies with Canadian ICE-003. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. L'appareil a été évalué pour répondre aux exigences générales d'exposition RF. L'appareil peut être utilisé dans des conditions d'exposition fixes / mobiles. La distance de séparation minimale est de 20 cm.

S21022300405 Model: SP95 ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 S21022300405 Model: SP95 Photo 3 Photo 4 S21022300405 Model: SP95 Photo 5 Photo 6

Model: SP95 FCCID: S7A-SP95 IC: 8154A-SP95 KC: R-C-SNA-SP95 5V , 1.0A Sena Technologies Made in China XXX- XXXXXX SILK COLOR PROCESSING PANTONE 8403C

S21022300405 Model: SP95 Photo 7 Photo 8 WIFI Ant S21022300405 Model: SP95 Photo 9 Photo 10 S21022300405 Model: SP95 Photo 11

FCC ID: S7A-SP95 Maximum Permissible Exposure (MPE) According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) MPE Calculation Method E (V/m) ＝ d GP**30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Average RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 *377 **30 D GP From the EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Measurement Result 2.4G WIFI: Operation Frequency: WIFI 802.11b/g/n HT20: 2412-2462MHz, Power density limited: 1mW/ cm 2 Antenna Type: PCB Antenna WIFI antenna gain: 1.5dBi; R=20cm mW=10^(dBm/10) antenna gain Numeric=10^(dBi/10)= 10^(1.5/10)=1.41 Conclusion: For the max result : 0.01770≤ 1.0 for Max Power Density, No RF exposure evaluation is required. Signature: Date: 2021-03-12 NAME AND TITLE (Please print or type): alex li/Manager COMPANY (Please print or type): Shenzhen NTEK Testing Technology Co., Ltd./ 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China. conducted power Tune-up power Antenna Evaluation result at 20cm Power density Limits Gain (dBm)(mW)Numeric 2412 12.29 13±11425.118861.410.007051 2437 13.66 13±11425.118861.410.007051 2462 16.68 16±11750.118721.410.014061 2412 12.87 13±11319.952621.410.005601 2437 13.85 13±11319.952621.410.005601 2462 17.15 17±11863.095731.410.017701 2412 12.31 13±11319.952621.410.005601 2437 13.34 13±11319.952621.410.005601 2462 16.66 16±11750.118721.410.014061 Channel Freq. (MHz) modulation (dBm) 802.11b Power density(mW/cm2 ) (mW/cm2) (dBm) 802.11g 802.11n H20 Ma x tune-up power

Report No.: S21022300405001 Version.1.3 Page 1 of 71 FCC RADIO TEST REPORT FCC ID: S7A-SP95 Product: WiFi Adapter Trade Mark: SENA Model No.: SP95 Family Model: N/A Report No.: S21022300405001 Issue Date: 05 Mar. 2021 Prepared for SENA TECHNOLOGIES.Inc 19, Heolleung-ro 569-gil, Gangnam-gu,Seoul,South Korea Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China Tel: 400-800-6106,0755-2320 0050 / 2320 0090 Website: http://www.ntek.org.cn Report No.: S21022300405001 Version.1.3 Page 2 of 71 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 10 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 12 7 TEST REQUIREMENTS .................................................................................................................................... 14 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 14 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 17 7.3 6DB BANDWIDTH ....................................................................................................................................... 26 7.4 DUTY CYCLE ............................................................................................................................................... 27 7.5 MAXIMUM OUTPUT POWER .................................................................................................................... 29 7.6 POWER SPECTRAL DENSITY ................................................................................................................... 30 7.7 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 31 7.8 SPURIOUS RF CONDUCTED EMISSIONS ................................................................................................ 32 7.9 ANTENNA APPLICATION .......................................................................................................................... 33 8 TEST RESULT ..................................................................................................................................................... 34 8.1 DUTY CYCLE ............................................................................................................................................... 34 8.2 MAXIMUM CONDUCTED OUTPUT POWER ........................................................................................... 39 8.3 OCCUPIED CHANNEL BANDWIDTH ....................................................................................................... 40 8.4 MAXIMUM POWER SPECTRAL DENSITY LEVEL ................................................................................. 50 8.5 BAND EDGE ................................................................................................................................................. 55 8.6 CONDUCTED RF SPURIOUS EMISSION .................................................................................................. 62 Report No.: S21022300405001 Version.1.3 Page 3 of 71 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : SENA TECHNOLOGIES.Inc Address ....................................... : 19, Heolleung-ro 569-gil, Gangnam-gu,Seoul,South Korea Manufacturer's Name .................. : Sena Technologies, Inc. Address ....................................... : Floor 4G/4F, Science&Technology building, Maozhoushan industry park, BaoAn District, ShenZhen City, GuangDong province, China Product description Product name .............................. : WiFi Adapter Model and/or type reference ..... : SP95 Family Model ............................... : N/A Measurement Procedure Used: APPLICABLE STANDARDS APPLICABLE STANDARD/ TEST PROCEDURE TEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Complied This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This repo…

Text truncated - open the document above for the full version.

FCC ID: S7A-SP95 Radiated Measurement Photos FCC ID: S7A-SP95 Conducted Measurement Photos