S7A-SP96SMH5-FM(SMH5)

| SMH5-FM(SMH5) 1 SMH5-FM(SMH5) SMH5-FM(SMH5) Bluetooth Headset & Intercom for Scooters and Motorcycles SENA www.senabluetooth.com Users Guide v1.0.0 | SMH5-FM(SMH5) 2 INTRODUCTION Thank you for choosing the SENA SMH5-FM(SMH5), Bluetooth Stereo Headset and Intercom for motorcycles. With the SMH5, you can call hands-free on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or other motorcycle riders. The SMH5-FM(SMH5) is compliant with the Bluetooth Specification v3.0 supporting the following profiles: Headset Profile, Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), and Audio Video Remote Control Profile (AVRCP). Please check with the manufacturers of other devices to determine their compatibility with this headset. Please read this user’s guide carefully before using the headset. Also check www.senabluetooth.com/support for the latest version of the user’s guide and additional information related to SENA Bluetooth products. The SMH5 features: ● Bluetooth hands-free for Bluetooth mobile phones ● Bluetooth stereo headset for Bluetooth audio devices such as MP3 players ● Bluetooth stereo headset for Bluetooth GPS navigations ● Smart Multi-Point Bluetooth: Connect two HFP devices simultaneously ● Multi-Pair Bluetooth Intercom for 4 persons ● Firmware Upgradeable Key Specifications: ● Bluetooth v5.0, Class1 ● Supporting profiles: Headset Profile, Hand-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), Audio Video Remote Control Profile (AVRCP) | SMH5-FM(SMH5) 3 PACKAGE CONTENTS Headset Main Unit Phone Button ● Making and Answering a mobile phone call ● Entering into Mobile Phone Pairing Mode ● Entering into Bluetooth Audio Device Pairing Mode (MP3, GPS navigation) ● Entering into Voice Activated Phone Answering Setting Mode Jog Dial ● Start and End an Intercom Conversation ● Volume adjustment by rotating ● Play and Pause Bluetooth MP3 player ● Track-forward and Track-back by rotating while pressing the button ● Entering into Intercom Pairing Mode ● Entering into Voice Activated Intercom Setting Mode ● Reject an incoming mobile phone call ● Call Transfer | SMH5-FM(SMH5) 4 Microphone Sponges Velcro Pads Hex Key (Allen Wrench) | SMH5-FM(SMH5) 5 POWERING ON/OFF AND CHARGING To power on and off the headset, you don’t need to press and hold any button for several seconds. Just short press the Jog Dial and the Phone Button simultaneously, and you will get quick on-and-off convenience. Powering On Press the Jog Dial and the Phone Button at the same time for about 1 second to power on. The blue LED turns on and you will hear ascending beeps. Powering Off Just short press the Jog Dial and the Phone Button simultaneously, you don’t need to press and hold for a few seconds. The red LED turns on for a while until it turns off completely and you will hear descending beeps. Charging The LED turns on red while charging, and turns to blue when the headset is fully charged. It takes about 2.5 hours to be completely charged. Low Battery Warning When the battery is low, the blinking blue LED in stand-by mode turns to red and you will hear mid-tone triple beeps. | SMH5-FM(SMH5) 6 PAIRING THE SMH5 WITH BLUETOOTH DEVICES Before using the SMH5-FM(SMH5) Bluetooth headset with any of Bluetooth devices for the first time, you need to do the pairing operation. It can be paired with Bluetooth mobile phones, Bluetooth audio devices such as MP3 or GPS, and with other SMH5-FM(SMH5) Bluetooth headsets. This pairing operation is only required once for each Bluetooth device, and the headset will remain paired with the devices and automatically connects to the paired devices again when they are within range. Mobile Phone Pairing 1. Turn on the headset and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps. 2. Search for Bluetooth devices on your mobile phone. The headset will be listed on your mobile phone as SMH5- FM(SMH5). (Some mobile phone may not ask for the PIN number.) 3. Enter 0000 for the PIN 4. The headset can be paired as Handsfree or Headset. Handsfree profile is normally recommended for most mobile phones. If it is paired as Headset, the buttons of the SMH5-FM(SMH5) may not work properly. Bluetooth MP3 Player Pairing 1. The procedure is the same with the procedure of “Mobile Phone Pairing” except the SMH5-FM(SMH5) must be paired as Stereo Headset. 2. If you use a Bluetooth mobile phone and a Bluetooth audio device at the same time, please make sure to pair as Handsfree or as Headset with the mobile phone and to pair as Stereo Headset with the Bluetooth audio device. Bluetooth GPS Navigation Pairing 1. You can listen to Bluetooth voice instructions from a Bluetooth GPS navigation. 2. The paring procedure is the same with the procedure of “Mobile Phone Pairing”, except the SMH5-FM(SMH5) could be paired as either Headset or Stereo Headset depending on the Bluetooth GPS navigation. 3. Please refer to the manual of the Bluetooth GPS navigation for details. | SMH5-FM(SMH5) 7 PAIRING WITH SELECTIVE PROFILE: A2DP STEREOOR HANDSFREE If you have a MP3 stereo music phone such as a Smartphone, sometimes you may need to selectively use the SMH5- FM(SMH5) for A2DP stereo music only or for mobile phone hands-free only. This instruction is for advanced users who want to pair the SMH5-FM(SMH5) to their Smartphones only with one selective profile: A2DP Stereo for music or HFP for phone call. If it is not the first time to do paring with the mobile phone, you have to clear the previous paring list on both devices; the mobile phone and SMH5-FM(SMH5). To clear pairing list on SMH5-FM(SMH5), please do factory reset described on the page 21. To clear pairing list on the mobile phone, please refer to the mobile phone manual. A2DP Stereo Music Only 1. Turn on the headset and press the Phone Button for 5 seconds unti…

Text truncated - open the document above for the full version.

SENA TECHNOLOGIES.Inc Apr 27, 2021 Applicant: SENA TECHNOLOGIES.Inc FCC ID: S7A-SP96 / IC: 8154A-SP96 To. Whom it may concern: We, Sena Technologies,Inc. declare that when equipped, the distance between antenna and one’s head surface is 60mm. Seunghyun Kim, Research Engineer

SENA TECHNOLOGIES.Inc 19, Heolleung-ro 569-gil, Gangnam-gu, Seoul, South Korea Apr 27, 2021 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Letter of Authorization We, the undersigned, hereby authorize Kenneth Kim of NCT Co.,Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: S7A-SP96 / IC : 8154A-SP96 including signing of all documents relating to these matters. Any and all acts carried out by Kenneth Kim of NCT Co.,Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from SENA TECHNOLOGIES.Inc “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Seunghyun KIM / Research Engineer

SENA TECHNOLOGIES.Inc 19, Heolleung-ro 569-gil, Gangnam-gu, Seoul, South Korea Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: S7A-SP96 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram Schematics Operational Description Part List [SP96-A] BLK [SP96-A] SCH [SP96-A] OpDes [SP96-A] Part Lis t The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); Exhibit Type File Name External Photos Internal Photos Test Setup Photos Manual [SP96-A] EXT Photo [SP96-A] INT Photo [SP96-A] Test Setup Photo [SP96-A] Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. Sincerely, Seunghyun KIM / Research Engineer

SENA TECHNOLOGIES.Inc April 27, 2021 Applicant: SENA TECHNOLOGIES.Inc FCC ID: S7A-SP96 / IC: 8154A-SP96 To. Whom it may concern: We, Sena Technologies,Inc. declare that the two products differ in size depending on the FM function. Please refer to the table as below. Model name Difference Basic model SP96-A FM equipped Family model SP96 FM unequipped Seunghyun Kim, Research Engineer

Basic Model (SP96-A) USB Port 1 (Charging port) USB Port 2 (Speaker and Mic port) Additional Model (SP96) USB Port 1 (Charging port) USB Port 2 (Speaker and Mic port)

Label & Location Basic model Family model Label

Basic Model (SP96-A) Internal BT Module BT Antenna Additional Model (SP96) Internal BT Module BT Antenna

KDB 447498 - Appendix B Model Name : FCC ID : (mm)(dBm)(dB)(dBm)(mW) 240215.2916.2942.56197.13PASS 244215.1716.1741.40196.19PASS 248014.3615.3634.36195.56PASS 24026.877.876.12197.13PASS 24427.398.396.90196.19PASS 24806.637.635.79195.56PASS 24027.838.837.64197.13PASS 24427.338.336.81196.19PASS 24806.777.775.98195.56PASS 24025.296.294.26197.13PASS 24424.705.703.72196.19PASS 24803.544.542.84195.56PASS 2450 3600 MPE Calculation KDB 447498 - 4.3.1 b) b) For 100 MHz to 6 GHz and test separation distances > 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following (also illustrated in Appendix B): 1) {[Power allowed at numeric threshold for 50 mm in step a)] + [(test separation distance – 50 mm)ꞏ(f(MHz)/150)]} mW, for 100 MHz to 1500 MHz 2) {[Power allowed at numeric threshold for 50 mm in step a)] + [(test separation distance – 50 mm)ꞏ10]} mW, for > 1500 MHz and ≤ 6 GHz SP96-A Distance (mm) 60 209 196 179 Frequency (MHz) 1900 Separation distance : 60.0 mmS7A-SP96 SAR Test exclusion thresholds for 100MHz to 6GHz at test separation distance ≥ 50 mm Limit Result GFSK 60.00± 1.00 101.0993 101.0783 100.9017 Modulation Frequency (MHz) Min. Test separation distance Measured Maximum Average power Tune-up tolerance Max. Power with tune-up tolerance π/4DQPSK 60.00± 1.00 100.1582 100.1798 100.1521 8DPSK 60.00± 1.00 100.1973 100.1773 100.1571 BT LE 60.00± 1.00 100.1099 100.0968 100.0747

Test Repot No.: NW2104-F001 211-71, Geumgok-ro, Hwaseong-si, Gyeonggi-do, Korea 18511 www.nct.re.kr TEL: +82-31-323-6070 FAX: +82-31-323-6071 Page 2 of 65 Table of contents 1. General Information -------------------------------------------------------------------------------- 2. Information’s about Test Item ------------------------------------------------------------------- 3. Test Report -------------------------------------------------------------------------------------------- 3.1 Test Summary ------------------------------------------------------------------------------------- 3.2 Test Report Version ----------------------------------------------------------------------------- 3.3 Transmitter Requirements 3.3.1 Antenna Requirement --------------------------------------------------------------------- 3.3.2 20 ㏈ Bandwidth & Occupied Bandwidth (99%) ----------------------------------- 3.3.3 Number of Hopping Frequencies ------------------------------------------------------- 3.3.4 Time of Occupancy (Dwell Time) ------------------------------------------------------- 3.3.5 Carrier Frequencies Separation -------------------------------------------------------- 3.3.6 Peak Output Power ------------------------------------------------------------------------ 3.3.7 TX Radiated Spurious Emission and Conducted Spurious Emission --------- 3.3.8 Conducted Emission ----------------------------------------------------------------------- APPENDIX APPENDIX I TEST SETUP ---------------------------------------------------------------------- APPENDIX II TEST EQUIPMENT USED FOR TESTS ---------------------------------- 3 3 5 5 6 7 8 15 18 20 24 31 58 61 63 Test Repot No.: NW2104-F001 211-71, Geumgok-ro, Hwaseong-si, Gyeonggi-do, Korea 18511 www.nct.re.kr TEL: +82-31-323-6070 FAX: +82-31-323-6071 Page 3 of 65 1. General Information’s 1.1 Test Performed Laboratory : NCT Co., Ltd. Address : 211-71, Geumgok-ro, Hwaseong-si, Gyeonggi-do, 18511, Korea Telephone : +82-31-323-6070 Facsimile : +82-31-323-6071 FCC Designation No. : KR0166 FCC Registration No. : 409631 IC Site Registration No. : 25897 2. Information’s about Test Item 2.1 Applicant Information Company name : SENA TECHNOLOGIES.Inc Address : 19, Heolleung-ro 569-gil, Gangnam-gu, Seoul, Korea Telephone / Facsimile : +82-2-571-8283 / +82-2-573-7710 2.2 Equipment Under Test (EUT) description Test item particulars : SMH5-FM(SMH5) Model and/or type reference : SP96-A Additional model name : SP96 Serial number : Prototype Antenna type and gain : PCB Pattern Antenna(M/N: SMH5) with Max gain: 0.69 ㏈i Date (s) of performance of tests: : 2021-04-01 ~ 2021-04-08 Date of receipt of test item : 2021-02-09 EUT condition : Pre-production, not damaged Number of channel : 79 EUT Power Source : DC 3.7 V Type of Modulation : BDR Mode(GFSK), EDR Mode(Pi/4 DQPSK, 8DPSK) Firmware version : 1.0 Hardware version : 1.0 Test software name(version) : Qualcomm BlueSuite_BlueTest3(3.3.5) Test Repot No.: NW2104-F001 211-71, Geumgok-ro, Hwaseong-si, Gyeonggi-do, Korea 18511 www.nct.re.kr TEL: +82-31-323-6070 FAX: +82-31-323-6071 Page 4 of 65 2.3 Tested Frequency Test Mode Test frequency (㎒) Low frequency Middle frequency High frequency GFSK 2 402 2 441 2 480 Pi/4 DQPSK 2 402 2 441 2 480 8DPSK 2 402 2 441 2 480 2.4 Used Test Software Setting Value Test Mode Setting Item Atn Mag Exp GFSK 8 5 2 Pi/4 DQPSK 9 5 3 8DPSK 9 5 3 2.5 Worst-Case BDR GFSK(DH5) EDR 8DPSK(3-DH5) Note: The power measurement has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates. Test Repot No.: NW2104-F001 211-71, Geumgok-ro, Hwaseong-si, Gyeonggi-do, Korea 18511 www.nct.re.kr TEL: +82-31-323-6070 FAX: +82-31-323-6071 Page 5 of 65 3. Test Report 3.1 Test Summary Applied FCC Rule IC Rule Test Items Test Condition Result 15.203 - Antenna Requirement Conducted C 15.247(a) - 20 ㏈ Bandwidth C - RSS GEN (6.7) Occupied Bandwidth (99%) C 15.247(a) RSS-247 (5.1) Number of Hopping Frequencies C 15.247(a) RSS-247 (5.1) Time of Occupancy (Dwell Time) C 15.247(a) RSS-247 (5.1) Carrier Frequencies Separation C 15.247(b) RSS-247 (5.4) Peak Output Power C 15.247(d) RSS-247 (5.5) Conducted Spurious Emission C 15.247(d) 15.205 & 15.209 RSS-247 (5.5) RSS-GEN (8.9 & 8.10) Radiated Spurious Emission Radiated C 15.207 RSS-GEN (8.8) Conducted Emissions AC Line Conducted C Note 1: C=Complies NC=Not Complies NT=Not Tested NA=Not Applicable The sample was tested according to the following specification: ANSI C63.10:2013. Compliance was determined by specification limits of the applicable standard according to customer requirements. Test Repot No.: NW2104-F001 211-71, Geumgok-ro, Hwaseong-si, Gyeonggi-do, Korea 18511 www.nct.re.kr TEL: +82-31-323-6070 FAX: +82-31-323-6071 Page 6 of 65 3.2 Test Report Version Test Report No. Date Description NW2104-F001 2021-04-21 Initial issue Test Repot No.: NW2104-F001 211-71, Geumgok-ro, Hwaseong-si, Gyeonggi-do, Korea 18511 www.nct.re.kr TEL: +82-31-323-6070 FAX: +82-31-323-6071 Page 7 of 65 3.3 Transmitter Requirements 3.3.1 Antenna Requirement According to §15.203 An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. According to §15.247(b)(4) e conducted output power limit specified in paragraph (b) of this section is based on the use of antennas with directional gains that do not exceed 6 ㏈i. Except as shown in paragraph (c) of this section, if transmitting antennas of directional gain greater than 6 ㏈i are used, the conducted output power from the intentional radiator shall be re…

Text truncated - open the document above for the full version.

Below 30 MHz Below 1 GHz Above 1 GHz Conducted Emission