S7GIHB603BBLUETOOTH VERTICAL CD MICRO SYSTEM WITH PLL FM RADIO, REMOTE CONTROL AND AC/DC ADAPTOR

USER’S GUIDE V: 776-01 For the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com IHB603B Bluetooth CD Radio Home Music System IHB603-776-01-IB.indd 13/6/2013 2:03:55 PM 2 • WARNING: Lithium batteries, like all rechargeable batteries are recyclable and should be recycled or disposed of in normal household waste. Contact your local government for disposal or recycling practices in your area. They should never be incinerated since they might explode. • WARNING: Shock hazard - Do Not Open. • AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR Mains Plug or Direct plug-in adapter is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the Mains Plug or Direct plug-in adapter should be disconnected from the mains socket outlet completely. La fiche d’alimentation ou adaptateur de courant est utilisé comme dispositif de déconnexion et doit rester accessible pendant l’utilisation. Pour mettre l’appareil hors tension, la fiche ou adaptateur de courant doit être débranché de la prise de courant. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries. No mezcle baterías viejas y nuevas. No mezcle baterías alcalinas, estándar (carbono-zinc) o recargables (ni-cad, ni-mh, etc.). • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. • WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • AVERTISSEMENT: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité. • CAUTION: Use of any controls or adjustments or performance of procedures other than those herein specified may result in hazardous radiation exposure. • WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • WARNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining. • WARNING: Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause. • CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • PRÉCAUTION: Danger d’explosion si les piles sont remplacées de façon incorrect. Remplacer les piles seulement par le même type de pile ou l’équivalent. • WARNING: The battery, batteries, and battery pack shall not be exposed to excessive heat such as sunshine, fire, or the like. Warnings and Precautions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ATTENTION RISQUE D' ÉLECTROCUTION NE PAS OUVRIR CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This product utilizes a Class 1 laser to read Compact Discs. This laser Compact Disc Player is equipped with safety switches to avoid exposure when the CD door is open and the safety interlocks are defeated. Invisible laser radiation is present when the CD Player’s lid is open and the system’s interlock has failed or been defeated. It is very important that you avoid direct exposure to the laser beam at all times. Please do not attempt to defeat or bypass the safety switches. WARNING: The remote control supplied with this product contains a button-cell battery that could be accidentally ingested by children. Do not leave button- cell batteries accessible to children. If swallowed, promptly see doctor and call (202) 625-3333. IHB603-776-01-IB.indd 23/6/2013 2:03:56 PM Customer Support: 1-888-999-42153 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate…

Text truncated - open the document above for the full version.

MATCH IIC IS1684S Battly AUDIO_OUT STAUTS_INDEX VOL_CONTROL CONNETCONTROL RETSET CIRCUIT ISP PLAY/PAUSE & ANT PORT PORT PORT PORT PORT PORT

DONG GUAN WANG NIU DUN WELLCOM ELECTRONICS FACTORY Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd. Columbia, MD Attention: Reviewing Engineering Reference: FCC ID: S7GIHB603B Date: April 9, 2013 Description of USB port Dear Sir/Madam: We declare that there is no circuit that could communication with PC or laptop etc. The USB port Only contains power lines and voltage detecting lines. The port is only used for output DC 5V/2A. Sincerely, Signature: Hu Guozhi/General Manager DONG GUAN WANG NIU DUN WELLCOM ELECTRONICS FACTORY

Reference No.: WTD13S0201268E Page 86 of 95 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 19 Photographs - Constructional Details 19.1 EUT – External View Reference No.: WTD13S0201268E Page 87 of 95 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Reference No.: WTD13S0201268E Page 88 of 95 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

FCC Label Location for model: IHB603B The Label must not be a stick-on paper. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. FCC ID: S7GIHB603B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Label Sample for model: IHB603B FCC ID: S7GIHB603B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Reference No.: WTD13S0201268E Page 89 of 95 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 19.2 EUT – Internal View Reference No.: WTD13S0201268E Page 91 of 95 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Reference No.: WTD13S0201268E Page 92 of 95 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Reference No.: WTD13S0201268E Page 93 of 95 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Reference No.: WTD13S0201268E Page 94 of 95 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Reference No.: WTD13S0201268E Page 95 of 95 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 19.3 EUT-RF Module View Bluetooth module PCB printed ANT. =End of test report==

IHB603B Circuit Descripiton 1,Power source: DC 5V from AC to DC adapter 2,FM radio: IC RDA5807 uses for channel selecting and signal amplifying, and receives command from MCU SC9671,then transfers the signal into L/R audio signal, sends the signal to IC7314 and IC HXJ9106 to amplify, output to speaker. 3,AUX signal: input to IC SC7314 and IC HXJ9106 to amplify, output to speaker. 4,CD disc: PDIC receives the signal and sends to IC SC9671 to RF amplify, process and D/A transfer, output to L/R ５,Bluetooth linking: This device uses wireless playing function. The RF module is F-3086 with Bluetooth V3.0+EDR.After paired with audio device such as iPod, mobile phone, The device receives audio signal from Bluetooth module F-3086 which employs 16MHz oscillator. The module process the wireless signal into digital signal and send to MCU which employs 32.768KHz and 12MHz oscillators. The MCU process the signal and send to IC SC7314 and IC HXJ9106 to amplify, output to speaker. This Bluetooth module is regulated to Bluetooth V3.0+EDR and set from 2402.00MHz to 2480.00MHz.The separation is 1.0MHz and there are 79 channels in total. The working procedures are: a. When power on, this device will loop scan the whole frequency until a connection command from the partner is received. b. This device transmits a response signal. c. The partner receives the response signal and recognizes it, then send a connection command to establish the connection. d. each frequency is used equally on the average by each transmitter that each new transmission event begins on the next channel in the hopping sequence after the final channel used in the previous transmission event. e. After the connection establish successfully, the data transmission is beginning. At the same time, the partner and this device will shift frequencies in synchronization per a same pseudo randomly ordered list of hopping frequencies, the hopping rate is 1600 times per second. This device conform to the criteria in FCC Public NoticeDA00-705. f. The bandwidth of the this device, which is set to a fixed width by the software, match the hopping channel bandwidth of their corresponding partner. This device is a true frequency hopping system and does not have the capability to be coordinated with other FHSS systems in an effort to avoid the simultaneous occupancy of individual hopping frequencies by multiple transmitters. There are 79 channels in total. The channels hopping from one channel to another channel during the pseudorandom selection process. The hopping interval is 12 millisecond. This system frequency hops between 79 channels. If it is determined that one of the 79 hopping channels is found to be noisy or poor due to other RF interference, then a new channel is selected from the 78 unused channels and the one noisy channel is released to the unused group. This repeats whenever a noisy or poor channel is detected. For example, for the hop pattern of 2414MHz,2434MHz,2444MHz,2434MHz,2451MHz,2441MHz,2454MHz,2434MHz,2427MHz, 2461MHz,2461MHz,2444MHz,2414MHz,2448MHz,2451MHz,2417MHz,2478MHz,2469MHz, 2473MHz,2403MHz,etc. The sequential hops can not follow any order, is completely random.

E E P R O M 2 4 C 3 2 ABCD 5 4 3 2 1 DCBA 1 2 3 4 5 1 A 0 2 A 1 3 A 2 4 G N D 5 S D A 6 S C L 7 W P 8 V C C U 2 A C E 2 4 C 3 2 C 1 1 1 u / 1 0 V C 1 8 1 0 u / 1 0 V C 4 1 u / 1 0 V C 1 0 1 0 u / 1 0 V C 1 9 0 . 1 u / 1 6 V C 5 0 . 7 5 p / 5 0 V R 2 N P - 0 4 0 2 C 7 1 8 p / 5 0 V 1 2 R 6 1 R L 1 2 . 2 n H 41 32 X 1 X 4 P - 1 6 M H Z 12 R 1 0 C 3 1 p / 5 0 V 12 R 5 1 K 12 R 8 1 K 1 2 F B 1 0 R C 1 7 1 u / 1 0 V L 3 L 2 2 u H C 1 5 1 0 u / 1 0 V I S 1 6 8 4 S - 2 0 2 1 V D D A O 2 A O H P M 3 V S S A O 4 A O H P L 5 V D D A 6 V S S A 7 V C O M 8 A I R 9 A I L 1 0 N C 1 2 V D D _ I O 1 3 R S T _ N 1 4 P 1 _ 2 15 P1_3 18 CODEC_VO 19 3V1_IN 20 ADAP_IN 21 BAT_IN 23 SAR_VDD 24 SYS_PWR 25 BK_VDD 26 BK_LX 4 2 X O _ N 4 1 X O _ P 4 0 V D D _ I O 3 8 H C I _ R X D 3 7 H C I _ T X D 16 1V8 3 6 P 0 _ 5 3 4 P 0 _ 2 3 2 P 2 _ 4 3 1 L E D 2 3 0 L E D 1 2 9 M F B 28 BK_OUT 56 AOHPR 55 1V8 54 EAN 52 VDD_IO 50 P0_0 49 P2_0 48 P3_0 47 P0_3 46 P0_1 45 RTX 43 VCC_RF 53 P3_5 3 5 P 2 _ 7 17 3V1_O 57 GND 1 1 N C 22 SK1 3 9 P 1 _ 6 44 RX_CLS1 51 P0_4 3 3 P 2 _ 2 27 BK_GND U 1 I S 1 6 8 4 S - 2 0 2 T P 1 R F - T P 1 C 8 1 8 p / 5 0 V C 1 4 0 . 1 u / 1 6 V C 2 2 p / 5 0 V C 1 2 1 u / 6 . 3 V C 6 1 u / 6 . 3 V 1 2 R 7 1 R C 1 6 1 0 u / 1 0 V C 1 3 1 u / 6 . 3 V 1 A N T 1 A N T - M P 8 C 1 1 . 8 p / 5 0 V 1 2 R 9 4 K 7 V D D _ I O V D D _ I O SYS_PWR 1V8 BAT_IN A D A P _ I N BK_OUT 1 V 8 B K _ O U T SYS_PWR CODEC_VO V D D _ I O V D D _ I O VDD_IO C O D E C _ V O C O D E C _ V I N 1 V 8 1V8 A O H P M L E D 1 P 1 2 H C I _ R X D P03 R S T _ N P 1 6 S P K L P 0 2 SK1 H C I _ T X D A I L A I R L E D 2 M F B P01 P04 EAN P35 P 2 4 P30 P 2 2 P 0 5 SPKR P00 P 2 7 P20 P 1 3P 1 2 P13 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn SC9673+PLL NUMBER CHECKED: SHEET: DRAW FILE TITLE COMPANY FINISHED APPROVED: DRAW: MODEL ON SIZE: A4 REV: 0 DATE:DATE:DATE: FILE 2012-10-17 1 OF 3 CD+5V SC9673+PLL YANG KEY RADIO REQUENCY R273 1K 10K22K33K Europe UL Japan Russia Radio Freauency 3V BATT DOOR SW IN GND WELLCOM ELECTRONICS COMPANY LIMITED option OUT LD+ LD- 1 CSN 2 DO 3 W 4 VSS 5 DI 6 CLK 7 HOLD 8 VCC U203 EN25F80 123456 CN202 R206 10K R207 10K R208 10K R212 4K7 R213 4K7 R211 4K7 R210 4K7 R205 10K R217 1K R216 1K 1 NC 2 VSSMIX6(X2) 3 PE3 4 LINEOUT_R 5 DAC_VSS 6 DAC_VDD 7 LINEOUT_L 8 VIMD 9 AVSS(X2) 10 KEY0 11 KEY1 12 KEY2 13 KEY3 14 AVDD(X2) 15 AVDD_MTR 16 FMIN 17 AMIN 18 AVSS_MTR 19 AVSS_DC(X2) 20 LX 21 AVDD_DC(X2) 22 VOUTFB 23 DN- 24 DP+ 25 VPP 26 12MXI 27 12MXO 28 VSS_MIX1_1 29 RESET 30 POWERON 31 PD7 32 PD6 33 PD5 34 VDD1 35 VDD332_1 36 VSS_MIX2-1 37 PB0 38 PB1 39 PB2 40 PB3 41 PB4 42 PB5 43 PB6 44 PB7 45 PC0 46 PC1 47 PC2 48 PC3 49 PC4 50 PC5 51 VDD33_3 52 PD0 53 PD1 54 PD2 55 PD3 56 PD4 57 CMNFIG[0] 58 CONFIG[2] 59 VDD5 60 VSS_MIX5 61 PORTF[4] 62 PORTF[3] 63 PORTF[2] 64 AVSDD 65 AV3DDAV3DD2 66 AN_F 67 AN_E 68 AN_D 69 AN_C 70 AN_B 71 AN_A 72 AN_V1650 73 AN_V210 74 AN_MD 75 AN_LDO 76 AN_RFO 77 AN_RFI 78 AN_BKINN 79 AN_BKINP 80 AN_CC 81 AN_REX 82 AN_FE 83 AN_TE 84 AN_CE 85 AN_PI 86 AN_DA02_TR 87 AN_DA03_FOC 88 AN_DA04_SL 89 AN_DA05_SPO 90 AVSS_MIX1_2 91 AVDD_FLASHADC 92 SFCLK 93 SF_CSN 94 SF_D0 95 SF_DI 96 SF_PE1 97 PE0 98 SVOTESTEN 99 SVODEBUGEN 100 SD_CSN 101 VSS_MIX4(X2) 102 SD_CLK 103 VDD 104 SD0 105 SDI 106 VDD335_1 107 VSS_MIX3_1 108 VDD335_2 109 VSS_MIX3_3 110 VDD33_6 111 PORTA[0] 112 PORTA[1] 113 PORTA[2] 114 PORTA[3] 115 PORTA[4] 116 PORTA[5] 117 PORTA[6] 118 PORTA[7] 119 PORTF[0] 120 PORTF[1] 121 PORTC[6] 122 PORTC[7] 123 VDD4 124 DEBUGTEST 125 CONIFG[1] 126 OSC32KIN 127 OSC32KOT 128 RTC_VDD3(X) U201 SC9671 C209104P C213 470P C212 470P C211 470P C214 104P C217 104P C216 104P R203 0R R204 2K R201 10R R202 10R R214 0R R215 1K R209 20K R225 10K R224 2K R272 2.2K R223 22K R222 3.3K C218 104P R221 1K R220 1K C208 18P C206 104P C205 104P C207 102P C202104P EC201 100UF EC202 100UF C203104P EC203 100UF C248 104P L202 2.2uH C204 104P EC204 100UF C245 104P C244 104P C243104P EC207 100UF EC220 10UF R256 1K R255 10K R257 10K C241 104P Q205 S9014 Q201 S8550 Q202 S8550 D201 IN4148 C240 104P C239 104P C238 22P C237 22P R253 100K R254 330R C236 104P X201 12MHZ C234 104P L203 3.3uH C232 104P C231 104P C230 104P R247 10K R246 1K C229 104P EC217 47UF C228102P C227 102P EC216 4.7UF EC215 4.7UF R265 4.7K R238 NC R239 NC X202 32.768KHz C223 104P C224 20P C225 20P C219 104P C220 104P C221 104P C222 104P C246100P R240 0R R242 12K Q203 S8550 R241 20K R270 2.2K EC209 220UF C250 104P EC214 10UF R243 2R2 13 2 4 L201 EC223 470UF/16 C253 104P L7 OR L206 2.2uH C201104P C233 104P C249NC C215 104P EC208 100UF EC213 47UF EC205 100UF EC206 470UF 12345678910111213141516 CN208 FFC16P L9 OR 321 CN205 R275 4K7 R276 4K7 R277 47K R278 47K J1 JMP 1 VINFC 2 TRB_1 3 REGO3 4 VINSL 5 REGO1 6 FWD 7 REV 8 VCC1 9 VOTR- 10 VOTR+ 11 VOSL+ 12 VOSL- 13 VOFC- 14 VOFC+ 28 MUTE 27 BIAS 26 VINTK 25 TRB_3 24 NC 23 VINLD 22 GND 21 VCTL 20 NC 19 VCC2 18 VOLD- 17 VOLD+ 16 VOTK- 15 VOTK+ 29 GND 30 GND U202 SA1466 R261 1K R262 1K R263 1K R264 1K R271 10K R273 1K 1 ADJ 2 VOUT 3 VIN 4 VOUT U204 ME6211-3.3V 3214 CN201 C260 104P EC261 470UF/16 C262 104P R244 33R 1 ADJ 2 VOUT 3 VIN 4 VOUT U1 ME6211-1.5V C252104P EC222 470UF/16 L207 1K L208 1K L209 1K L210 1K L213 100M/600R EC224 10UF/10 L211 100M/600 L212 100M/600 ZD201 3V9 R288 100 12 CN204 C247 104P EC225 220U ESD1 R295 4K7 R296 4K7 C251100P C254100P 1 CEO 2 CE1 3 CE2 4 GND 5 SDA 6 SCL 7 WC 8 VDD U205 24C02 C255 104P R298 100R R299 100R R267 10K R266 10K R245 2R2 R280 100R R281 100R R284 1K 123456 CN209 R283 1K 321 CN207 R218 1K R219 1K 1 2345 CN203 R285 1K R286 1K Q604 S8550 R6291K R630 56Ω LED601 BACK_LIGHT R631 4K7 1 2 3 D202 BAT54C R287 1K SFAGND SFAGND VDD3V3 SF_CSN SFAGND SFAGND SP-SL_SW AGND DAC_VDD VDD3V3 CLK12MI VDD3V3 PD1 GND FEDA VC2_ VCOM1 PD MOTO-MOTO+AN_CC AN_REX SF_DISF_DO SF_CLK SF12 SFAGND DMOSLO FOCO TRO VDD1.5V VDD3V3 RESET PD0 CB REMO_IR GND GND GND GND SP+ AGND MGND MGND MGND MGND MGND MGND MGND SFAGND MGND MGND GND VDD1.5V VCC3 VCC3 MGND GND FOC-RAD-RAD+FOC+PDVRLDSFAGNDFCBADERF3V3VCOM SFAGND CD+5V GND MGND SL+…

Text truncated - open the document above for the full version.

Reference No.: WTD13S0201268E Page 1 of 95 FCC TEST REPORT Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn FCC ID : S7GIHB603B Applicant : DONG GUAN WANG NIU DUN WELLCOM ELECTRONICS FACTORY Address : Xia Wu Lane, WangLian Hamlet, WangNiuDun Town, DongGuan City, GuangDong Province, China Manufacturer : DONG GUAN WELLCOM ELECTRONICS COMPANY LIMITED Address : NANYU INDUSTRIAL PARK,NANCHANG ROAD,WANGNIUDUN TOWN,DONGGUAN CITY,CHINA Equipment Under Test (EUT) : Product Name : BLUETOOTH VERTICAL CD MICRO SYSTEM WITH PLL FM RADIO, REMOTE CONTROL AND AC/DC ADAPTOR Model No. : IHB603B Standards : FCC CFR47 Part 15 Section 15.247:2010 Date of Test : February 28~March 18, 2013 Date of Issue : March 27, 2013 Test Result : PASS Remark: * The sample described above has been tested to be in compliance with the requirements of ANSI C63.4:2003. The test results have been reviewed and comply with the rules listed above and found to meet their essential requirements. The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Services (Shenzhen) Co., Ltd. Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China Testing location: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China Tel: +86-755-83551033 Fax: +86-755-83552400 Compiled by: Approved by: Zero Zhou / Project Engineer Philo Zhong / Manager Reference No.: WTD13S0201268E Page 2 of 95 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 2 Test Summary Test Items Test Requirement Result Spurious Radiated Emissions 15.205(a) 15.209 15.247(d) PASS Band edge Emissions 15.247(d) PASS Spurious RF Conducted Emissions from out of band 15.247(d) PASS Duty Cycle 15.35 PASS Conducted Emissions 15.207 PASS 20dB Bandwidth 15.215c 15.247(a)(1) PASS Maximum Peak Output Power 15.247(b)(1) PASS Frequency Separation 15.247(a)(1) PASS Number of Hopping Frequency 15.247(a)(1)(iii) PASS Dwell time 15.247(a)(1)(iii) PASS Maximum Permissible Exposure (Exposure of Humans to RF Fields) 1.1307(b)(1) PASS Reference No.: WTD13S0201268E Page 3 of 95 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 3 Contents Page 1 COVER PAGE ................................................................................................................................................ 1 2 TEST SUMMARY .......................................................................................................................................................... 2 3 CONTENTS .................................................................................................................................................................... 3 4 GENERAL INFORMATION ......................................................................................................................................... 5 4.1 GENERAL DESCRIPTION OF E.U.T. .................................................................................................................... 5 4.2 DETAILS OF E.U.T. ............................................................................................................................................. 5 4.3 TEST FACILITY .................................................................................................................................................... 5 4.4 TEST LOCATION .................................................................................................................................................. 5 5 EQUIPMENT USED DURING TEST .......................................................................................................................... 6 5.1 EQUIPMENTS LIST ............................................................................................................................................... 6 5.2 MEASUREMENT UNCERTAINTY ........................................................................................................................... 6 5.3 TEST EQUIPMENT CALIBRATION ......................................................................................................................... 6 6 CONDUCTED EMISSION ............................................................................................................................................ 7 6.1 E.U.T. OPERATION ............................................................................................................................................. 7 6.2 EUT SETUP ........................................................................................................................................................ 7 6.3 CONDUCTED EMISSION TEST RESULT ............................................................................................................... 8 7 RADIATED EMISSIONS ............................................................................................................................................ 12 7.1 EUT OPERATION : ............................................................................................................................................ 12 7.2 TEST SETUP ...................................................................................................................................................... 13 7.3 SPECTRUM ANALYZER SETUP .......................................................................................................................... 14 7.4 TEST PROCEDURE ............................................................................................................................................ 15 7.5 CORRECTED AMPLITUDE & MARGIN CALCULATION......................................................................................... …

Text truncated - open the document above for the full version.

Reference No.: WTD13S0201268E Page 84 of 95 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 18 Photographs – Test Setup 18.1 Conducted Emissions Setup of the worst mode: CD Playing (CD Drive: QINYYS ) 18.2 Radiated Emissions Below 30MHz Reference No.: WTD13S0201268E Page 85 of 95 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Setup of the worst mode: AUX in with USB charging (CD Drive: QINYYS ) Above 1GHz