S9I-AC100Radar Sensor

User Manual TRW AUTOCRUISE being a supplier for the automotive industry, this device is sold to the auto manufacturer and not to the general public. The device will be mounted behind the auto bumper. The following text is intended to be added in the final customer user manual. This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made to this equipment not expressly approved by TRW AUTOCRUISE may void the FCC authorization to operate this equipment. Radiofrequency radiation exposure Information: The radiated output power of the device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. Class B digital Device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 8 June 2012 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name S9I-AC100 AC100 For the product stated above, we request permanent confidentiality for exhibits which contain Operational Description, Block Diagram, Schematics, Parts Lists or Tune Up Information. The above exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name: Sylvain GERMAINE Company: TRW / AUTOCRUISE Address: Secteur de la Pointe du Diable ZAC Technopôle Iroise Avenue du Technopôle 29280 PLOUZANE - FRANCE Phone: +33 298 489 828 Fax: +33 298 495 655 Email: [email protected]

External Photos Figure 1: Rear view of the sensor, with the location for laser engrave information Figure 2: Front view of the sensor (transmitting side) Figure 3: Connector side view

LABEL INFORMATION CANADA IC: 5860A–AC100 USA FCC ID: S9I–AC100 LOCATION It will be laser engraved on the back side of the sensor, as on the picture below

Internal Photos Figure 1: RF Board, antenna side Figure 2: RF Board, circuit side Figure 3: PCB Board, side 1 Figure 4: PCB Board, side 2 Figure 5: Central casting, PCB Board side Figure 6: Central casting, RF Board side Figure 7: Housing internal views Figure 8: Internal view, central casting with Boards

2012-08-03 Page 1 of 37 TEST REPORT Test report no.: 1-4216/11-02-03-A Testing laboratory Applicant CETECOM ICT Services GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12076-01-01 Area of Testing: Radio/Satellite Communications AUTOCRUISE S.A.S Avenue du Technopole 29280 Plouzane / FRANCE Phone: +33 298 454 368 Fax: +33 298 495 655 Contact: Sylvain Germaine e-mail: [email protected] Phone: +33 298 489 828 Manufacturer AUTOCRUISE S.A.S Avenue du Technopole 29280 Plouzane / FRANCE Test standard/s FCC 47 CFR Part 15 Title 47 of the Code of Federal Regulations; Chapter I Part 15 - Radio Frequency Devices RSS - 210 Issue 8 Spectrum Management and Telecommunications - Radio Standards Specification Low-power Licence-exempt Radiocommunication Devices (All Frequency Bands): Category I Equipment For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: 24 GHz Automotive Radar Model name: AC100 FCC ID: S9I-AC100 IC: 5860A-AC100 Frequency: 24.075 - 24.175 GHz Antenna: integrated patch antenna Power Supply: 12.0 V DC via external power supply Temperature Range: -40 °C to +105 °C This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorised: Test performed: p.o. Tobias Wittenmeier Karsten Geraldy Meheza Walla Senior Testing Manager Expert Test report no.: 1-4216/11-02-03-A 2012-08-03 Page 2 of 37 1 Table of contents 1 Table of contents............................................................................................................................................2 2 General information .......................................................................................................................................3 2.1 Notes and disclaimer ..........................................................................................................................3 2.2 Application details...............................................................................................................................3 3 Test standard/s ...............................................................................................................................................3 4 Test environment............................................................................................................................................4 5 Test item ..........................................................................................................................................................4 6 Test laboratories sub-contracted .................................................................................................................4 7 Summary of measurement results ...............................................................................................................5 8 RF measurement testing ...............................................................................................................................6 8.1 Description of test setup ....................................................................................................................6 8.1.1 Radiated measurements.............................................................................................................6 8.1.2 Additional comments ..................................................................................................................7 8.2 RSP100 test report cover sheet / performance test data ................................................................8 9 Measurement results......................................................................................................................................9 9.1 Field strength of emissions (wanted signal) ....................................................................................9 9.2 Occupied bandwidth (99% bandwidth) ...........................................................................................13 9.3 Field strength of emissions (radiated spurious) ............................................................................16 10 Test equipment and ancillaries used for tests ...................................................................................27 11 Observations .........................................................................................................................................28 Annex A Photographs of the test setup ......................................................................................................29 Annex B External photographs of the EUT.................................................................................................30 Annex C Internal photographs of the EUT ..................................................................................................32 Annex D Document history ..........................................................................................................................36 Annex E Further information........................................................................................................................36 Annex F Accreditation Certificate ...............................................................................................................37 Test report no.: 1-4216/11-02-03-A 2012-08-03 Page 3 of 37 2 General information 2.1 Notes and disclaimer The test results of this test report relate exclusively to the test item specifie…

Text truncated - open the document above for the full version.

Test report no.: 1-4216/11-02-03-A 2012-08-03 Page 29 of 37 Annex A Photographs of the test setup Photo No. 1: Photo No. 2: