NOTICE_WS500_TLL 13/06/05 16:56 Page 140 1514 Channel button [CHANNEL] Use this button to select the channel of the remote sensor. Each time this button is pressed, window A.2in the main unit displays the channel number and the outdoor temperature measured by the corresponding remote sensor. Memory button [MIN/MAX] Use this button to display in windows A.2and A.3the minimum, maximum or current temperatures recorded by the main unit and the remote sensor. Alarm button [ALARM] Use this button to change the time display mode A.7and change the time and date settings (see section on setting the time and the date). . Mode button [MODE] Use this button to change the time display mode A.7and change the time and date settings (see section on setting the time and the date). and UP [up arrow] and DOWN [down arrow] buttons Use these buttons to increase or decrease the displayed value when changing a setting. Alarm button [ON/OFF] This b utton activates and deactivates the alarm. Weather forecasts Channel number Indoor temperature Outdoor temperature Radio control indicator Alarm indicator Time – date - alarm W e thank you for purchasing the Géonaute WS500 weather station. This device indicates the w eather conditions for the next 12-24 hours by measuring trends in atmospheric pressure. It also lets you see at a glance the indoor temperature, the outdoor temperature (measured by a wireless sensor) and the time and date. T hanks to the weather information provided by this station, you can anticipate changes in the w eather, and bring the right gear along to your outdoor sports activities. Read these instructions carefully before using this device and save them as long as you have the product. LIMITED WARRANTY DECA THLON guarantees the initial purchaser that this weather station is free from any defects related to the materials or manufacture for a period of two years from the date of purchase. Please keep your receipt as proof of purchase. • This guar antee does not cover damage resulting from misuse, from a failure to respect the precautions for use or from accidents; neither does this guarantee cover damage resulting from improper maintenance or from use of the item for commer- cial purposes. • This guarantee does not cover damage resulting from repairs carried out by parties not authorized by DECATHLON. • The guar antees contained here explicitly replace all other guarantees including the implicit guarantee of fair and trade quality and/or adaptation to use. DECATHLON cannot under any circumstances be held responsible for any damage, be it direct or indirect, general or specific, caused by or related to these directions for use or the products they describe. • During the guarantee period, the item will either be repaired free of charge by an authorized repair service or replaced free of charge (dependingon the distributor). • The guarantee does not cover batteries or cracked or broken casings where signs of a blow are evident. USE/PRECAUTIONS FOR USE Description ofnormal operating conditions :The weather station is designed to measure the indoor temperature (at the receiver) and outdoor temperature (at the wireless sensor). It displays a local weather forecast, calculated from barometric measurements, for the upcoming 12 to 24 hours. It gives the time in 2 time zones and features a daily alarm. Restrictions on use /Precautions for use • Handle the device with care;do not drop it or bang it. • Do not dismantle the device or the sensor. Doing so would nullify the Décathlon warranty and may damage the device. This point does not concern the procedure of changing the batteries, described under the heading "Changing the batteries". • Please read instructions carefully before use and operate the device under normal operating conditions. • The receiver is not watertight. It is designed for indoor use. Place it on a flat, stable surface or fasten it to the wall in a well-ventila- ted, clean room, away from direct sunlight. • The wireless sensor is resistant to splashes, but it should never be immersed in water or exposed to heavy rain. Avoid prolonged exposure to direct sunlight and wind. • Do not expose the receiver or the sensor to extreme temperatures. In wintertime, cold temperatures reduce the power and life- time of the sensor's batteries. This means that at cold temperatures (0°C), the sensor may stop transmitting a signal although it was transmitting atsummer temperatures (20°C). To solve the problem, bring the sensor closer or use rechargeable Ni-MH batteries, which are less sensitive to the cold, and change the batteries more often. • Like any device utilizing radio transmission, the receiver and the wireless sensor are sensitive to electromagnetic interference. Do not place them near electromagnetic sources (televisions, computers, cordless telephones, electrical equipment) which may impair their functioning. Recycling : The "crossed-out trash can" symbol means that this product, as well as the batteries it contains, are made of recy- clable materials. They should not be disposed of with municipal waste. When no longer needed, dispose of the batteries, as well as the electronic product, at a recycling collection loca- tion. Recycling electronic waste protects the environment and your health. GB A1 A2 A3 A5 B2 A4 A7 B4 B1 A6 B3 B7 C4 C2 C1 C3 A1 A2 A3 A5 A6 A7 A4 Battery compartment Reset button Stand Wall mount C1 C2 C3 C4 B1 B2 B3 B6 B5 B5B6 B4 B7 NOTICE_WS500_TLL 13/06/05 16:56 Page 14 1716 4 - Carefully reinser t the seal of the sensor, taking care not to damage it. Ne xt, close the sensor's battery cover with the 4 Phillips head screws. 5 - Position the sensor in an upright positionon the table, using the table stand provided. 6 - Optional:Installing additional sensors . T ake a second sensor and repeat steps 1 to 4 in the exact same order, choosing a free channel (CHANNEL)f or each additional sensor (Step 2). Fill in the information on the table in step 2 to identify each sensor and its cha…

Text truncated - open the document above for the full version.

External Photos

Test Setup FCC ID : SB9THN128-01 External Photo - Front External Photo - Rear

ID Label/Location Info

COLOR : - FNT, REAR & BATT. DOOR CABINET INJECTED COLOR BLACK - S.S COLOR IN PMS 877C SILVER IDTTechnology Limited APPROVAL MKTR: KALIE WOL : 0503090 A/W (PDD)TEXT (ENG)TRANS A/W(CU)TEXT(PMGR) A/W(SUP) DATE DATE DATE DATE DATE DATE MODEL: THN128 CU : DECATHLON TITLE: COLOR SPECIFICATION PREPARED BY: JEAN / WINNIE DATE: 14 SEP, 05 FILE : THN128.AI F/O: P/N.: LENS COLOR IN PMS COOL GRAY 10C S.S COLOR IN PMS877C SILVER MODEL NO. THN128

Operational Description

Block C, 9/F, Kaiser Estate, Phase 1, 41 Man Yue Street, Hunghom, Kowloon, Hong Kong. Tel (852) 2764 7873 Fax (852) 2765 6620 Email: [email protected] Web Site: http://www.idthk.com 3 Thermo Sensor IDT model no. THN128 Technical Description Introduction This unit is a simple thermo sensor. It can transmit data through RF carrier in frequency of 433.92MHz. It is designed for outdoor usage and it is powered by 2 piece ‘AAA’ size battery cells. Main MCU (U1) MCU is a simple thermo detector. MCU transmit data by 433.92MHz RF transmitter Circuit. This MCU detect battery by low battery inspect circuit. RF transmitter Circuit (Q2, X1) It is 433.92MHz AM transmit modulate. RF transistor oscillates in frequency of SAW resonator, which is 433.92MHz. Low Battery Inspect Circuit This is MCU detects low battery signal with this Circuit. Reset Circuit It uses reset the unit. Function option for operation mode It uses to select functional option at the production. Customer cannot see the short pads.

Test Report

• The test results reported in this test report shall refer only to the sample actually tested and shall not refer or be deemed to refer to bulk from which such a sample may be said to have been obtained. • This report shall not be reproduced except in full without prior authorization from Intertek Testing Services Hong Kong Limited. • For Terms And Conditions of the services, it can be provided upon request. • The evaluation data of the report will be kept for 3 years from the date of issuance. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2371 0521 Website: www.hk.intertek-etlsemko.com Decathlon Promiles - Health & Discovery Dept - Application For Certification (FCC ID: SB9THN128-01) Transmitter 05127321 DL/ Sandy Lee September 30, 2005 INTERTEK TESTING SERVICES FCC ID: SB9THN128-01 i LIST OF EXHIBITS INTRODUCTION EXHIBIT 1: General Description EXHIBIT 2: System Test Configuration EXHIBIT 3: Emission Results EXHIBIT 4: Equipment Photographs EXHIBIT 5: Product Labelling EXHIBIT 6: Technical Specifications EXHIBIT 7: Instruction Manual EXHIBIT 8: Miscellaneous Information INTERTEK TESTING SERVICES FCC ID: SB9THN128-01 ii MEASUREMENT/TECHNICAL REPORT Decathlon Promiles - Health & Discovery Dept - MODEL: Geonaute THN128 FCC ID: SB9THN128-01 September 30, 2005 This report concerns (check one:) Original Grant X Class II Change Equipment Type: Low Power Transmitter (example: computer, printer, modem, etc.) Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart C for intentional radiator - the new 47 CFR [10-01-04 Edition] provision. Report prepared by: Derek Leung Intertek Testing Services 2/F., Garment Center, 576, Castle Peak Road, Kowloon, Hong Kong. Phone: 852-2173-8539 Fax: 852-2371-0521 INTERTEK TESTING SERVICES FCC ID: SB9THN128-01 iii Table of Contents 1.0 General Description..............................................................................................2 1.1 Product Description ..............................................................................................2 1.2 Related Submittal(s) Grants .................................................................................2 1.3 Test Methodology.................................................................................................3 1.4 Test Facility ..........................................................................................................3 2.0 System Test Configuration ...................................................................................5 2.1 Justification ..........................................................................................................5 2.2 EUT Exercising Software .....................................................................................5 2.3 Special Accessories .............................................................................................5 2.4 Equipment Modification ........................................................................................6 2.5 Measurement Uncertainty ....................................................................................6 2.6 Support Equipment List and Description ..............................................................6 3.0 Emission Results ..................................................................................................8 3.1 Field Strength Calculation ....................................................................................9 3.2 Radiated Emission Configuration Photograph ....................................................11 3.3 Radiated Emission Data.....................................................................................12 4.0 Equipment Photographs .....................................................................................15 5.0 Product Labelling ................................................................................................17 6.0 Technical Specifications ....................................................................................19 7.0 Instruction Manual ..............................................................................................21 8.0 Miscellaneous Information .................................................................................23 8.1 Measured Bandwidth .........................................................................................24 8.2 Discussion of Pulse Desensitization ...................................................................25 8.3 Calculation of Average Factor ............................................................................26 8.4 Emissions Test Procedures................................................................................27 INTERTEK TESTING SERVICES FCC ID: SB9THN128-01 iv List of attached file Exhibit type File Description filename Test Report Test Report report.pdf Operation Description Technical Description descri.pdf Test Setup Photo Radiated Emission radiated photos.doc Test Report Bandwidth Plot bw.pdf External Photo External Photo external photos.doc Internal Photo Internal Photo internal photos.doc Block Diagram Block Diagram block.pdf Schematics Circuit Diagram circuit.pdf ID Label/Location Label Artwork and Location label.pdf User Manual User Manual manual.pdf Test Report Timing Diagram timing.pdf INTERTEK TESTING SERVICES FCC ID: SB9THN128-01 1 EXHIBIT 1 GENERAL DESCRIPTION INTERTEK TESTING SERVICES FCC ID: SB9THN128-01 2 1.0 General Description 1.1 Product Description The Equipment Under Test (EUT) is a Transmitter operating at 433.92MHz. The EUT is powered by 3V d.c. (2 x 1.5V “AAA” battery). It transmits temperature signal to the corresponding receiver…

Text truncated - open the document above for the full version.

Test Setup Photos

Test Setup FCC ID : SB9THN128-01 Radiated Photo - Front Radiated Photo - Rear