SBZINNOS10014Compact Type Fluorescent Lamp with Self-Ballast

OPERATING INSTRUCTION FOR ENERGY SAVING LAMPS INSTRUCTION： ·USE ONLY ON 120 VOLTAGE 60HERTZ · TEMPERATURE RANGE: -8 °C ~40 °C · COMPLIES WITH PART 18 OF THE FCC RULES. ·USING INDOORS OR UNDER DYR CIRCUMSTANCES WILL HAVE BETTER EFFECT CAUTION: · NOT FOR USE IN TOTALLY ENCLOSED FIXTURES · RISK OF ELECTRIC SHOCK DO NOT USE WHERE DIRECTLY EXPOSED TO WATER ·THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXIT FIXTURES OR EMERGENCY EXIT LIGHTS · NOT FOR USE WITH DIMMERS 、 ELECTRONIC TIMER OF PHOTOCELL DEVICES · NEVER DISASSEMBLE OR MODIFY-ANY CHANGES COULD VOID THE USER ’ S AUTHORITY TO OPERATE THIS DEVICE ·PLEASE CUT OFF THE POWER DURING INSTALLATION OR CHANGING THE LAMP AND DO NOT TOUCH THE BULB AT THE SAME TIME · THIS PRODUCT MAY CAUSE INTERFERENCE TO RADIO EQUIPMENT AND SHOULD NOT BE INSTALLED NEAR MARITIME SAFETY COMMUNICATIONS EQUIPMENT OPERATING BETWEEN 0.45-30MHZ.

External Photos

ID Label Label FCC ID: SBZINNOS10014

ID Label/Location Label Location Information Specifications: Text is Black or white in color and is left justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Refer to the below arrow.

Internal Photos

i fX f;,J .(0) (0)-1 . :J'" -'-CD (o)-ICD . :J'"- -"CD CD . 0 C»O':;: ~'6' ~g~ 0;:1:Q. Q.a.-. CD_", -p)i Zo -. 0-':) p)o -, 3 cn ZO Z- o'Q 10 (/)Q. ~c: co I :- c ~ ~ r- 'i."~~, ,

Note: The test report is specially limited to the above company and the product model only. It may not be duplicated without prior written consent of Bay Area Compliance Laboratory Corporation. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the US Government. FCC PART 18 MEASUREMENT AND TEST REPORT For Inno light(Shanghai) Int.Co.,Ltd No.90 QingAn Road, QingPu Zhen Shanghai China FCC ID: SBZINNOS10014 July 19, 2004 This Report Concerns: Original Report Equipment Type: Compact type fluorescent lamp with self-ballast Test Engineer: Sam Lin Report Number RSH04062903 Test Date: July 15, 2004 Reviewed By: Chris Zheng Prepared By: Bay Area Compliance Lab Corp. ShenZhen Suite C, 41-D Electronics Science & Technology Building, No. 2070 Shennanzhong Rd ShenZhen, Guandong 518031, P.R. China Tel: 86-755- 83296449 Fax: 86-755- 83273756 Inno light(Shanghai) Int.Co.,Ltd FCC ID: SBZINNOS10014 Report # RSH04062903.doc Page 2 of 7 FCC Part 18 ID Report TABLE OF CONTENTS GENERAL INFORMATION.......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................................................3 OBJECTIVE...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S).............................................................................................................................3 TEST METHODOLOGY..................................................................................................................................................3 TEST FACILITY.............................................................................................................................................................3 SYSTEM TEST CONFIGURATION ..........................................................................................................................4 JUSTIFICATION.............................................................................................................................................................4 EQUIPMENT MODIFICATIONS.......................................................................................................................................4 CONFIGURATION OF TEST SYSTEM..............................................................................................................................4 TEST SETUP BLOCK DIAGRAM.....................................................................................................................................4 CONDUCTED EMISSION...........................................................................................................................................5 MEASUREMENT UNCERTAINTY....................................................................................................................................5 EUT SETUP..................................................................................................................................................................5 SPECTRUM ANALYZER SETUP......................................................................................................................................6 TEST EQUIPMENT LIST AND DETAILS...........................................................................................................................6 TEST PROCEDURE........................................................................................................................................................6 TEST DATA..................................................................................................................................................................6 PLOT(S) OF TEST DATA................................................................................................................................................7 Inno light(Shanghai) Int.Co.,Ltd FCC ID: SBZINNOS10014 Report # RSH04062903.doc Page 3 of 7 FCC Part 18 ID Report GENERAL INFORMATION Product Description for Equipment Under Test (EUT) The Inno light(Shanghai) Int.Co.,Ltd’s model INNO-S10-014L or the “EUT” as referred to in this report is a Compact type fluorescent lamp with self-ballast which measures approximately 12.0cm L x 5.0cm W x 5.0cm H, rated input voltage: AC 120 V/60Hz. * The test data gathered are from production sample, serial number: 040653, provided by the manufacturer. Objective The following test report is prepared on behalf of Inno light(Shanghai) Int.Co.,Ltd in accordance with Part 2, Subpart J, and Part 18, Subparts A, B, and C of the Federal Communication Commissions rules and regulations. The objective is to determine compliance with FCC rules. Related Submittal(s)/Grant(s) No Related Submittals. Test Methodology All measurements contained in this report were conducted with MP-5, FCC Methods of Measurements of Radio Noise Emissions from ISM Equipment, February 1986. All radiated and conducted emissions measurement was performed at Bay Area Compliance Laboratory Corp. The radiated testing was performed at an antenna-to-EUT distance of 3 Meters. Test Facility Test site at Bay Area Compliance Laboratory Corporation has been fully described in reports submitted to the Federal Communication Commission (FCC) and Voluntary Control Council for Interference (VCCI). The details of these reports has been found to be in compliance with the requirements of Section 2.948 of the FCC Rules on February 11 and December 10, 1997 and Article 8 of the VCCI regulations on December 25, 1997. The facility also complies with the radiated and AC line conducted test site criteria set forth in ANSI C63.4-2001 and FCC MP-5. The Federal Communications Commission and Voluntary Control Council for Interferen…

Text truncated - open the document above for the full version.

Test Setup Photos Conduction Emission -Front View Conduction Emission -Side View