SI5HCR102Wireless Audio Receiver

U-MEDIA Communications, Inc. AudioMate Wireless Digital Media System HCR-102: Wireless Audio Receiver & BRC-220: Bidirectional Remote Control VERSION 0.1 WAP-5000 DO NOT COPY 13-1 U-MEDIA Communications, Inc. 1. INTRODUCTION........................................................................................................................ 3 2. GETTING TO KNOW THE MEDIA SYSTEM............................................................................ 3 2.1. CHECKING PACKAGE CONTENT................................................................................................. 3 2.2. GETTING STARTE D.................................................................................................................... 4 2.3. IDENTIFYING COMPONENTS....................................................................................................... 5 2.3.1. LCD SCREEN LAYOUT........................................................................................................... 7 2.3.2. STATUS ICON INDICATION: ...................................................................................................... 7 2.3.3. MENU INDICATION: ................................................................................................................. 8 2.3.4. SOFT KEYS INDICATION: ......................................................................................................... 9 2.3.5. MENU TREE OF LCD DISPLAY................................................................................................. 9 APPENDIX...................................................................................................................................... 10 WAP-5000 DO NOT COPY 13-2 U-MEDIA Communications, Inc. 1. Introduction BRC-220, a Bidirectional Remote Control is designed to work with HCR-102 audio receiver to provide long range interactive remote control function. In cooperating with standard based Bluetooth class 1 technology, BRC-220 can support more than 100M operating distance at clean open area (depending on environment configuration). The BRC-220 uses SPP profile to communicate with HCR-102 over Bluetooth. HiFi or Home Theater System BRC-220 Bidirectional Remote Control HCR-102 Wireless Audio Receiver RCA Composite or SPDIF Interfaces 2. Getting to Know the Media System 2.1. Checking Package Content 1. BRC-220 3. BRC Charging Stand 5. 5V/2A HCR Power Adapter 6. CD 2. HCR-102 4. 5V/1A BRC Power Adapter (mini USB connector) 7. QIG WAP-5000 DO NOT COPY 13-3 U-MEDIA Communications, Inc. 2.2. Getting Started Connecting the BRC and HCR for First Use 1 Connect the power adapter to HCR and power on HCR 2 Connect the power adapter (with miniUSB connector) to charge BRC and power on BRC. (You should charge your new BRC when you remove it from the package) Pairing the BRC and HCR for First Use 3 Pairing Main Menu will pop up on the screen after you turn on BRC. Select Pairing and press Enter, BRC will spend 60 seconds to search HCR nearby and list MAC addresses found. Select the MAC en will show up. Address you want to pair with and Press Enter. 4 After Pairing process finish successfully, Main Scre Configuring Internet Connection 5 Go to SettingsÆNETWORK, choose the Network Interface you want to enable 5.1 Network Interface: LAN or WLAN. (If you choose LAN, 5.2 & 5.4 will be grey out) 5sers to complete wireless settings 5.3 IP Settings: choose Auto / DHCP or Manual / Static IP .2 Wireless LAN Setting Wizard: Scan surrounding access points and guide u WAP-5000 DO NOT COPY 13-4 U-MEDIA Communications, Inc. 5.4 Advanced Wireless Settings Date / Time Settings 6 Ge 6.1 NTP: Network time synchronization and time zone selection. 6urrent date setting when NTP is off 6.3 TIME: Current time setting when NTP is off L ISTENING TO INTERNET RADIO STATION / MUSIC o to SettingsÆNTP / DATE / TIME to adjust date and tim .2 DATE: C Internet Radio Station Go to Internet RadioÆvTuner and select stations you want to play. Click Central Key to start / stop play. Music on USB Storage Go to USB StorageÆDisk and select tracks playback. Click Central Key to start / pause / stop play. The ing message will show up to ask you to parse all media files. If you choose Yes, System will start ScanningÆParsingÆCategorizing for all Media files on the USB Disk based on Album, Genre and Artist Category. 2.3. Identifying Components BRC-220 first time when you try to play USB Music, a warn Ye s WAP-5000 DO NOT COPY 13-5 U-MEDIA Communications, Inc. WAP-5000 DO NOT COPY 13-6 Power Volume Soft Keys Navigators s Description Key Power 1. short pressing (1s): resume BRC if BRC is under standby mode 2. short pressing (1s): toggle mute state if BRC is powered on 3. Long pressing (3s): turn off BRC, SMR will go into stand-by mode Volume + / - Volume up / down (allow repeat key) Soyft Ke s Defined by each screen. UP Arrow Key Scrolling up (allow repeat key) DOWN Arrow Scrolling down (allow repeat key) Key LEFT Arrow 1. Go to last page 2. Rewind (USB disk) (allow repeat key) Key RIGHT Arrow 2. Forward (USB disk) (allo 1. Go to next page w repeat key) Key 3. OK/Accept/Enter 4. Play Navigators 1. Play Central Key 2. Pause/Resume (short push: 1sec) 3. top (long push 2 sec) 4. OK/Accept/Enter S HCR-102 U-MEDIA Communications, Inc. WAP-5000 DO NOT COPY 13-7 2.3.1. LCD Screen Layout 2.3.2. Status Icon Indication: Icon (20x20) Description Sleep Status Indicate Sleep Function is activated. When only 10 seconds left before system go to sleep, this icon will change to a count Power Switch S/PDIF optical out Phone Jack Audio Ethernet Power Line in RCA out USB disk Reset USB Disk WLAN Signal Strength Internet Status Date / Time Play status Shuffle Repeat curr ent track / Repeat all tracks Battery status Sleep Mode Left Middle Right Soft keys Status Icons Menu Area U-MEDIA Communications, Inc. down clock to tell user after 10 seconds some action will happen Indicate WLAN signal strength is “Poor”, RED color Indicate WLAN signal strength is “Low”,…

Text truncated - open the document above for the full version.

SPORTON International Inc. PAGE NUMBER : A1 OF A6 TEL : 886-2-2696-2468 ISSUED DATE : Dec. 12, 2006 FAX : 886-2-2696-2255 APPENDIX A. Photographs of EUT SPORTON International Inc. PAGE NUMBER : A2 OF A6 TEL : 886-2-2696-2468 ISSUED DATE : Dec. 12, 2006 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A3 OF A6 TEL : 886-2-2696-2468 ISSUED DATE : Dec. 12, 2006 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A4 OF A6 TEL : 886-2-2696-2468 ISSUED DATE : Dec. 12, 2006 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A5 OF A6 TEL : 886-2-2696-2468 ISSUED DATE : Dec. 12, 2006 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A6 OF A6 TEL : 886-2-2696-2468 ISSUED DATE : Dec. 12, 2006 FAX : 886-2-2696-2255

SPORTON International Inc. PAGE NUMBER : A1 OF A9 TEL : 886-2-2696-2468 ISSUED DATE : Dec. 12, 2006 FAX : 886-2-2696-2255 APPENDIX A. Photographs of EUT SPORTON International Inc. PAGE NUMBER : A2 OF A9 TEL : 886-2-2696-2468 ISSUED DATE : Dec. 12, 2006 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A3 OF A9 TEL : 886-2-2696-2468 ISSUED DATE : Dec. 12, 2006 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A4 OF A9 TEL : 886-2-2696-2468 ISSUED DATE : Dec. 12, 2006 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A5 OF A9 TEL : 886-2-2696-2468 ISSUED DATE : Dec. 12, 2006 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A6 OF A9 TEL : 886-2-2696-2468 ISSUED DATE : Dec. 12, 2006 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A7 OF A9 TEL : 886-2-2696-2468 ISSUED DATE : Dec. 12, 2006 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A8 OF A9 TEL : 886-2-2696-2468 ISSUED DATE : Dec. 12, 2006 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A9 OF A9 TEL : 886-2-2696-2468 ISSUED DATE : Dec. 12, 2006 FAX : 886-2-2696-2255

Report No.: FR6N1412 FCC ID: SI5HCR102 Page No. : 1 of 3 Appendix C. Maximum Permissible Exposure Report No.: FR6N1412 FCC ID: SI5HCR102 Page No. : 2 of 3 1. Maximum Permissible Exposure 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method E (V/m) ＝ d GP××30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Peak RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 377 30 d GP × ×× From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Report No.: FR6N1412 FCC ID: SI5HCR102 Page No. : 3 of 3 1.3. Calculated Result and Limit For Bluetooth Antenna Type : Printed Max Conducted Power for Bluetooth : 14.16dBm Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power ( mW ) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result -0.81 0.8299 14.1600 26.0615 0.004305 1 Complies For IEEE 802.11b/g Antenna Type : Dipole Max Conducted Power for IEEE 802.11b/g : 21.23dBm Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power ( mW ) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 3.985 2.5032 21.2300 132.7394 0.066138 1 Complies

Report No.: FR6N1412 FCC ID: SI5HCR102 Page No. : 1 of 16 Appendix D. Co-location Report No.: FR6N1412 FCC ID: SI5HCR102 Page No. : 2 of 16 1. Radiated Emissions Measurement 1.1.1. Limit 20dBc in any 100 kHz bandwidth outside the operating frequency band. In case the emission fall within the restricted band specified on 15.205(a), then the 15.209(a) limit in the table below has to be followed. Frequencies (MHz) Field Strength (micorvolts/meter) Measurement Distance (meters) 0.009~0.490 2400/F(KHz) 300 0.490~1.705 24000/F(KHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 1.1.2. Measuring Instruments and Setting Please refer to section 5 of equipments list in this report. The following table is the setting of spectrum analyzer and receiver. Spectrum Parameter Setting Attenuation Auto Start Frequency 1000 MHz Stop Frequency 10th carrier harmonic RB / VB (Emission in restricted band) 1MHz / 1MHz for Peak, 1 MHz / 10Hz for Average RB / VB (Emission in non-restricted band) 1000KHz / 1000KHz for peak Receiver Parameter Setting Attenuation Auto Start ~ Stop Frequency 9kHz~150kHz / RB 200Hz for QP Start ~ Stop Frequency 150kHz~30MHz / RB 9kHz for QP Start ~ Stop Frequency 30MHz~1000MHz / RB 120kHz for QP Report No.: FR6N1412 FCC ID: SI5HCR102 Page No. : 3 of 16 1.1.3. Test Procedures 1. Configure the EUT according to ANSI C63.4. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 4. For each suspected emissions, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 5. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth under Maximum Hold Mode. 6. For emissions above 1GHz, use 1MHz VBW and RBW for peak reading. Then 1MHz RBW and 10Hz VBW for average reading in spectrum analyzer. 7. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 8. If the emissions level of the EUT in peak mode was 3 dB lower than the average limit specified, then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions which do not have 3 dB margin will be repeated one by one using the quasi-peak method for below 1GHz. 9. For testing above 1GHz, the emissions level of the EUT in peak mode was lower than average limit (that means the emissions level in peak mode also complies with the limit in average mode), then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions will be measured in average mode again and reported. 10. In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the recorded data should be QP measured by receiver. High – Low scan is not required in this case. Report No.: FR6N1412 FCC ID: SI5HCR102 Page No. : 4 of 16 1.1.4. Test Setup Layout For radiated emissions below 30MHz For radiated emissions above 30MHz Above 10 GHz shall be extrapolated to the specified distance using an extrapolation factor of 20 dB/decade form 3m to 1.5m. Distance extrapolation factor = 20 log (specific distance [3m] / test distance [1.5m]) (dB); Limit line = specific limits (dBuV) + distance extrapolation factor [6 dB]. 1.1.5. Test Deviation There is no deviation with the original standard. 1.1.6. EUT Operation during Test The EUT was programmed to be in continuously transmitting mode. 3 or 1.5m Report No.: FR6N1412 FCC ID: SI5HCR102 Page No. : 5 of 16 1.1.7. Results of Radiated Emissions (9kHz~30MHz) Temperature 25°C Humidity 63% Test Engineer Jordan Hsiao Configurations 802.11g CH 6 + Bluetooth Channel 39 Freq. Level Over Limit Limit Line Remark (MHz) (dBuV) (dB) (dBuV) - - - - See Note Note: The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. Distance extrapolation factor = 40 log (specific distance / test distance) (dB); Limit line = specific limits (dBuV) + distance extrapolation factor. Report No.: FR6N1412 FCC ID: SI5HCR102 Page No. : 6 of 16 1.1.8. Results of Radiated Emissions (30MHz~1GHz) Temperature 25°C Humidity 63% Test Engineer Jordan Hsiao Configurations 802.11g CH 6 + Bluetooth Channel 39 Vertical Report No.: FR6N1412 FCC ID: SI5HCR102 Page No. : 7 of 16 Horizontal Note: The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. Emission level (dBuV/m) = 20 log Emission level (uV/m). Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor = Level. Report No.: FR6N1412 FCC ID: SI5HCR102 Page No. : 8 of 16 1.1.9. Results for Radiated Emissions (1GHz~10 th Harmonic) Temperature 25°C Humidity 63% Test Engineer Jordan Hsiao Configurations 802.11b CH 6 + Bluetooth Channel 0 Vertical Report No.: FR6N1412 FCC ID: SI5HCR102 Page No. : 9 of 16 Horizontal Report No.: FR6N1412 FCC ID: SI5HCR102 Page No. : 10 of 16 Temperature 25°C Humidity 63% Test Engine…

Text truncated - open the document above for the full version.

SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Kwei-Shan Hsiang, TaoYuan Hsien, Taiwan, R.O.C. Ph: 886-3-327-3456 / FAX: 886-3-327-0973 / www.sporton.com.tw Report Format Version: RF-15.247-2006-06-16-e FCC RADIO TEST REPORT Applicant’s company U-MEDIA Communications, Inc. Applicant Address 9F, No. 1, Jin-Shan 7th St., Hsinchu 300, Taiwan, R.O.C. FCC ID SI5HCR102 Manufacturer’s company U-MEDIA Communications, Inc. Manufacturer Address 9F, No. 1, Jin-Shan 7th St., Hsinchu 300, Taiwan, R.O.C. Product Name Wireless Audio Receiver Brand Name U-MEDiA Model Name HCR-102 Test Rule 47 CFR FCC Part 15 Subpart C § 15.247 Test Freq. Range 2400 ~ 2483.5MHz Received Date Nov. 8, 2006 Final Test Date Dec. 3, 2006 Submission Type Original Equipment Statement Test result included is only for the Bluetooth part of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.4-2003 and 47 CFR FCC Part 15 Subpart C. The test equipment used to perform the test is calibrated and traceable to NML/ROC. Report No.: FR6N1412AA Report Format Version: RF-15.247-2006-2-17-d Page No. : i of ii FCC ID: SI5HCR102 Issued Date : Dec. 12, 2006 Table of Contents 1. CERTIFICATE OF COMPLIANCE ......................................................................................................................... 1 2. SUMMARY OF THE TEST RESULT .......................................................................................................................... 2 3. GENERAL INFORMATION .................................................................................................................................. 3 3.1. Product Details....................................................................................................................................................................................3 3.2. Accessories .........................................................................................................................................................................................3 3.3. Table for Filed Antenna.......................................................................................................................................................................3 3.4. Table for Carrier Frequencies .............................................................................................................................................................3 3.5. Table for Test Modes ...........................................................................................................................................................................4 3.6. Table for Testing Locations..................................................................................................................................................................4 3.7. Table for Supporting Units ...................................................................................................................................................................5 3.8. Table for Parameters of Test Software Setting .....................................................................................................................................5 3.9. Test Configurations .............................................................................................................................................................................6 4. TEST RESULT ..................................................................................................................................................... 8 4.1. AC Power Line Conducted Emissions Measurement...........................................................................................................................8 4.2. Maximum Peak Output Power Measurement ...................................................................................................................................12 4.3. Hopping Channel Separation Measurement ...................................................................................................................................14 4.4. Number of Hopping Frequency Measurement.................................................................................................................................19 4.5. Dwell Time Measurement..................................................................................................................................................................21 4.6. Radiated Emissions Measurement ....................................................................................................................................................28 4.7. Band Edge Emissions Measurement .................................................................................................................................................40 4.8. Antenna Requirements .....................................................................................................................................................................44 5. LIST OF MEASURING EQUIPMENTS ................................................................................................................... 45 6. TEST LOCATION.............................................................................................................................................. 47 APPENDIX A. PHOTOGRAPHS OF EUT.........................................................................................................A1 ~ A14 APPENDIX B. TEST PHOTOS.......................................................................................................................... B1 ~ B5 APPENDIX C. MAXIMUM PERMISSIBLE EXPOSURE................…

Text truncated - open the document above for the full version.

Report No.: FR6N1412AA FCC ID: SI5HCR102 Page No. : 1 of 5 Appendix B. Test Photos Report No.: FR6N1412AA FCC ID: SI5HCR102 Page No. : 2 of 5 1. Photographs of Conducted Emissions Test Configuration FRONT VIEW REAR VIEW Report No.: FR6N1412AA FCC ID: SI5HCR102 Page No. : 3 of 5 2. Photographs of Radiated Emissions Test Configuration FRONT VIEW REAR VIEW Report No.: FR6N1412AA FCC ID: SI5HCR102 Page No. : 4 of 5 FRONT VIEW REAR VIEW Report No.: FR6N1412AA FCC ID: SI5HCR102 Page No. : 5 of 5 FRONT VIEW REAR VIEW