SIG-ULB2000Beltpack Transmitter

User’s manual Version 1.0 August 2006 ULTRALINK ULB2000 2 ULTRALINK ULB2000 CAUTION:To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. WARNING:To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus should not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should be placed on the apparatus. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure—voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual. DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8) Only use attachments/accessories specified by the manufacturer. 9) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. IMPORTANT SAFETY INSTRUCTIONS 3 ULTRALINK ULB2000 TABLE OF CONTENTS 1. INTRODUCTION......................................................................................................... 3 1.1 Before you get started.......................................................................................................... 4 1.1.1 Shipment....................................................................................................................... 4 1.1.2 Registration.................................................................................................................. 4 1.1.3 Initial operation of the transmitter................................................................................. 4 1.1.4 Online registration........................................................................................................ 5 2. CONTROL ELEMENTS............................................................................................... 5 3. OPERATING THE TRANSMITTER............................................................................... 6 3.1 Turning the transmitter on..................................................................................................... 6 3.2 Channel setting...................................................................................................................... 6 3.3 Setting your own frequency.................................................................................................6 3.4 Preset ..................................................................................................................................... 7 3.5 Mic Gain ................................................................................................................................. 8 3.6 Auto Mute ............................................................................................................................... 9 3.7 Turning the transmitter off................................................................................................... 10 4. STATUS QUERY....................................................................................................... 10 4.1 Battery condition and transmission channel....................................................................... 10 4.2 Transmission frequency....................................................................................................... 11 4.3 Preset .................................................................................................................................... 11 4.4 Mic Gain ................................................................................................................................ 11 4.5 Auto Mute .............................................................................................................................. 11 5. ULB2000 LEVEL SETTING........................................................................................ 11 6. APPLICATION EXAMPLE......................................................................................... 12 7. INSTALLATION......................................................................................................... 12 7.1 Operating information .......................................................................................................... 12 7.1.1 Attach the transmitter ................................................................................................. 12 7.1.2 General information .................................................................................................... 12 7.2 Audio connections............................................................................................................... 13 8. SPECIFICATIONS..................................................................................................... 14 FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION............. 15 MICROPHONE QUICK START GUIDE........................................................................... 16 1. INTRODUCTION Thank you very much for expressing your confidence in us by purchasing the ULTRALINK ULB2000. This Transmitter, coupled to the receiver ULR2000 from BEHRINGER, comprises a modern, high- performance wireless transmission system. Due to its amazing set of features, you can use the ULB2000 in any situation that requires the highest quality in s…

Text truncated - open the document above for the full version.

CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 2006-08-09 TO WHOM IT MAY CONCERN . '" Pursuant to Paragraphs §0.457 and 0.459 of the Commission's Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Behringer International GmbH requests confidentiality for the following products: FCC ill Number Product Title/Model SIG-ULB2000 ULB2000 For the product stated above, we request that the following information be held confidential: 1. Circuit diagrams and PCBs submitted as Equipment Authorization Electronic Filing attachment: "schematics". 2. Block diagram submitted as Equipment Authorization Electronic Filing attachment: "blockdiagram". 3. Operational description submitted as Equipment Authorization Electronic Filing attachment: "operational description" The above exhibits contain Behringer International GmbH trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our mobile beltpack transmitter. This material is not customarilf available to the general public and we request that it be withheld from public inspection. If you have any q to contact me at the address shown below. Sincerely, (signed) Name: Fra Company: BE GmbH Address: Hanns- Martin-Schleyer-Str .36-38 Phone: +49 2154 / 9206-0 Email: F. [email protected] . ~. " I

CETECOM ICT Services GmbH Test report no.: 2-4412-01-03B/06 Issue Date:2006-09-20 Page 39 (54) 5 Photograps of Test Equipment Photograph no.: 1 CETECOM ICT Services GmbH Test report no.: 2-4412-01-03B/06 Issue Date:2006-09-20 Page 40 (54) Photograph no.: 2 CETECOM ICT Services GmbH Test report no.: 2-4412-01-03B/06 Issue Date:2006-09-20 Page 41 (54) Photograph no.: 3 CETECOM ICT Services GmbH Test report no.: 2-4412-01-03B/06 Issue Date:2006-09-20 Page 42 (54) Photograph no.: 4

CETECOM ICT Services GmbH Test report no.: 2-4412-01-03B/06 Issue Date:2006-09-20 Page 43 (54) Photograph no.: 5 CETECOM ICT Services GmbH Test report no.: 2-4412-01-03B/06 Issue Date:2006-09-20 Page 44 (54) Photograph no.: 6 CETECOM ICT Services GmbH Test report no.: 2-4412-01-03B/06 Issue Date:2006-09-20 Page 45 (54) Photograph no.: 7 CETECOM ICT Services GmbH Test report no.: 2-4412-01-03B/06 Issue Date:2006-09-20 Page 46 (54) Photograph no.: 8

CETECOM ICT Services GmbH Radio Satellite Communication Untertürkheimer Straße 6-10 . D-66117 Saarbrücken Telephon: +49 (0)681 598-0 Telefax: -9075 RSC14 issued test report consists of 54 Pages Page 1 (54) Recognized by the Federal Communications Commission FCC–Identification Number: 90462 TCB ID: DE 0001 Anechoic chamber registration no.: 3463 (IC) Accredited by the German Accreditation Council DAR–Registration Number DAT–P–176/94-D1 Independent ETSI compliance test house ETSI Accredited Bluetooth ® Test Facility (BQTF) Test Report No.: 2-4412-01-03B/04 FCC Part 74.861 / CANADA RSS-123 ULB2000 / ULR2000 FCC ID : SIG-ULB2000 TX: IC ID: 5337A-ULB2000 RX: IC ID: 5337A-ULR2000 The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Cetecom ICT is under license CETECOM ICT Services GmbH Test report no.: 2-4412-01-03B/06 Issue Date:2006-09-20 Page 2 (54) Table of Contents 1 General Information 3 1.1 Notes 3 1.2 Testing Laboratory 4 1.3 Details of Applicant 4 1.4 Application Details 4 1.5 Test Item 5 1.6 Test Specifications: 5 2 Technical Test 6 2.1 Summary of Test Results 6 2.2 Test Results 7 2.2.1 OUTPUT POWER (radiated) FCC Rule Part 74.861 (e)(1)(ii) 7 2.2.2 AFC FREQ ERROR vs. VOLTAGE FCC Rule Part 74.861 9 2.2.3 AFC FREQ ERROR vs. TEMPERATURE 10 2.2.4 CHARACTERISTICS OF THE AUDIO MODULATION CIRCUITRY 12 2.2.5 OCCUPIED BANDWIDTH FCC Rule Part 74.861(e)(3). (5)/ Sec. 2.1049 13 2.2.6 EMISSION MASK FCC 74 861(e)(6) 17 2.2.7 RADIATED EMISSIONS FCC Rule Part 74 subpart H 20 2.2.8 RADIATED EMISSIONS Receiver FCC Rule Part 15.209 26 2.2.9 Conducted emissions § 15.107/207 30 2.2.10 CONDUCTED SPURIOUS EMISSIONS FCC Rule Part 74 subpart H 31 3 TEST EQUIPMENT AND ANCILLARIES USED FOR TESTS 34 4 Photographs of Test Setup 36 5 Photograps of Test Equipment 39 CETECOM ICT Services GmbH Test report no.: 2-4412-01-03B/06 Issue Date:2006-09-20 Page 3 (54) 1 General Information 1.1 Notes The test results of this test report relate exclusively to the test item specified in 1.5. The CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the CETECOM ICT Services GmbH. Test Laboratory Manager: 2006-09-28 RSC8414 H. Ames Date Section Name Signature Technical Responsibility for Area of Testing: 2006-09-28 RSC8412 D. Hausknecht Date Section Name Signature CETECOM ICT Services GmbH Test report no.: 2-4412-01-03B/06 Issue Date:2006-09-20 Page 4 (54) 1.2 Testing Laboratory CETECOM ICT Services GmbH Untertürkheimer Straße 6 - 10 66117 Saarbrücken Germany Telephone : + 49 681 598 - 0 Telefax + 49 681 598 - 9075 E-mail : [email protected] Internet : www.cetecom-ict.de Accredited testing laboratory The Test laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025. DAR-registration number : DAT-P-176/94-D1 Accredited Bluetooth ® Test Facility (BQTF) 1.3 Details of Applicant Name : Behringer Spezielle Studiotechnik GmbH Street : Hanns-Martin-Schleyer Strasse 36-38 City : D-47877 Willich Country : Germany Telephone : +49 2154 484 0353 Telefax : +49 2154 484 0370 Contact : Mr. Michael Weppler Telephone : +49 2154 484 0353 E-mail : [email protected] 1.4 Application Details Date of receipt of application : 2006-09-13 Date of receipt of test item : 2006-09-13 Date of test : 2006-09-13 to 2006-09-15 CETECOM ICT Services GmbH Test report no.: 2-4412-01-03B/06 Issue Date:2006-09-20 Page 5 (54) 1.5 Test Item Type of equipment : Low power auxiliary equipment Type designation : Transmitter: ULB2000 Receiver: ULR2000 Manufacturer : Behringer Spezielle Studiotechnik GmbH Street : Hanns-Martin-Schleyer Strasse 36-38 City : D-47877 Willich Country : Germany Serial number : - Additional information : Frequency : 794.1 – 805.9 MHz Type of modulation : 160KF3E (2x max.Audio Frequency + 2x max. FM Deviation) Number of channels : Preset 4*8 channels out of 320 Antenna : TX: external rod antenna RX: λ/4 monopole antennas Power supply : TX: 9V DC Battery RX: external 115V Ac power supply Output power : max 12.3 mW ERP Occupied bandwidth : 160 kHz (max. 200 kHz ) Transmitter spurious : 38nW (-44.2 dBm ) Receiver spurious . -.- DC Voltage and Current into final Amplifier : V ce = 9.0V I ce = 5.5mA Temperature range : -30°C - +50°C FCC ID : SIG-ULB2000 IC ID – TX : 5337A-ULB2000 IC ID – RX : 5337A-ULR2000 OATS No. : 3463 1.6 Test Specifications: FCC Part 74 Subpart H CANADA RSS-123 DECLARATION OF COMPLIANCE: I attest that the testing was performed or supervised by me; that the test measurements were made in accordance with the above-mentioned standard(s); and that the equipment identified in this application has been subjected to all the applicable test conditions specified in the departmental standards and all of the requirements of the standard have been met. Signature: ______________________________________________ Date: ___2006-09-20 Harro Ames ; Test management NAME AND TITLE (Please print or type): CETECOM ICT Services GmbH Test report no.: 2-4412-01-03B/06 Issue Date:2006-09-20 Page 6 (54) 2 Technical Test All radiated tests were done with a headset (Microphone) or a instrument cable. 2.1 Summary of Test Results TEST PROCEDURE All tests were done in accordance with the EIA/TIA 603. THE SUBSTITUTION METHOD ( TIA/EIA 603) WAS USED. This products fulfills also the requirements for CANADA RSS-123 No deviations from the technical specification(s) were ascertained in the course of the tests performed. Final verdict : PASS CETECOM ICT Services GmbH Test report no.: 2-4412-01-03B/06 Issue Date:2006-09-20 Page 7 (54) 2.2 Test Results 2.2.1 OUTPUT POWER (radiated) FCC Rule Part 74.861 (e)(1)(ii) Method of measurement: Measuring the EIRP of Spurious/Harmonic Em…

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Test report no.: 2-4412-01-03B/06 Issue Date:2006-09-20 Page 36 (54) 4 Photographs of Test Setup Radiated Emissions