SJ8M514Wireless 5 LCD Monitor

1 USER MANUAL Dual Mode ( Wi-Fi + PWiFi) Baby Monitor Model No. : WM544514H 2 WARNING STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cords within 3 feet of crib or playpen. Never use extension cords with AC Adapters. Only use the AC Adapters provided. • Some adult assembly or installation required. • This product contains small parts that may cause choking. Keep small parts away from children. • This product is NOT intended to replace proper supervision of children. You MUST check your child’s activity regularly, as this product will not alert parents to silent activities of a child. • Before using this product, read and follow all instructions contained in this booklet, and read and follow all instructions and warnings on the product. • NEVER use the transmitter or monitor near water, including near a bathtub, sink, laundry tub, wet basement, etc. • This product is intended for indoor use only. • This product is not intended for use as a medical monitor and its use should not replace adult supervision. • The transmitter detects normal sound levels within a range of 2 to 3 meters (6 to 10 feet) from a child. If the child moves outside of this range, if may not be able to detect sounds from him or her. • It is essential that you check the operating range and condition of the transmitter monitor on initial installation and on a regular basis after that. • Check reception regularly. Test monitor before use and after changing camera location. • Do not take apart the product by yourself. • To prevent overheating, keep the product and AC power adapters away from any direct sunlight and heat sources such as radiators, heat registers, cooking devices (e.g., stoves and ovens) and other appliances that produce heat (e.g., amplifiers, televisions and stereos). • Ensure that the product is well ventilated during use. Avoid contact with pillows and furniture that may block ventilation. • Use only the AC adapters provided with the product, as other adapters may damage the product. Plug the adapters only into standard household current (100~240 volts AC). Place the AC adapters avoiding pinch points otherwise you can damage the adapters. • When an AC adapter is plugged into a power source, DO NOT touch the exposed end of the AC adapter’s cord. • Do not use extension cords with the AC power adapters to avoid entanglement. • Images and sounds are transmitted by the product over public airwaves and transmissions may be picked up by other units. (Although the transmission distance is 100m or longer, it may vary depending on whether there are obstacles between the camera and the monitor.) • Caution if you use the system to watch a young child, do not place the camera where the child can reach. • When using the system with only battery power and the charge is low, then the picture and or sound may be affected. If this occurs then please connect the AC power adapter. The transmission range of the wireless signal may weaken if heavy obstructions such as a concrete, brick, or metal walls are between the camera and monitor, or if there are several Wi-Fi routers and devices in your environment. To avoid interference with RF signal, keep your cell phone at least 3ft away from the Camera and 3 Monitor. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Features:  2.4 GHz PWiFi + WiFi dual mode technology  System expandable up to 2 cameras, single or split display  Multiple (6) languages selection  Camera with night vision and sound trigger  Lullaby and temperature display  2-way audio, monitor or smart phone can talk back to camera  5’’ capacitive touchscreen monitor  Remote pan & tilt, digital zoom  Free iOS & Android APP. What's Included Product Overview Wireless Camera 4 1. Pair Button: a. Establishes a new connection between the camera and monitor during the pairing process, b. Push and hold to reset camera when adding camera to App 2. IR Sensor & LEDs: Infrared LEDs provide viewing in NO/LOW Light conditions. 3. Image sensor/Lens 4. Microphone: Detects & transmits the sounds from camera to monitor. 5. Temperature Sensor: The measured ambient temperature is displayed on the monitor. 6. Speaker: Enables the ability to talk from monitor/phone to camera and play lullabies. 7. 1/4” nut for goose neck bracket 8. Antenna: Sends & receives signals to or from the monitor. 9. DC 5V Power Input: Input for the power adapter, 5V 1A, type C connector 10. Wall Mounting Screw Holes Wireless Monitor 1. Antenna: Sends & receives signals to or from the Camera. 2. Sound Bar: Indicates the level of sound detected by the Camera. 3. DC 5V Power Input: Input for the Power Adapter 5V 1A. (type C connector) 4. Screen: 5” capacitive touchscreen panel. 5. Microphone: Detects & transmits the sound from monitor to camera. 6. Power On/Off button: a. Press and hold to switch the monitor on/off. b. Short press will change monitor to power save mode (Audio always on) c. In power save mode, when VOX on, higher sound will activate the monitor. 7. Kick Stand: Enables the table stand for the monitor. 8. Battery: Rechargeable lithium polymer battery for portable use. Getting Started Installing the Monitor & Camera 5 1. Fully charge the monitor via power adapter. Camera must be plugged in at all time. 2. Place the camera in the preferred position. You can place it on the table/cabinet, or mount it on a wall or ceiling through screw hole at the bottom of the camera. 3. Press and hold the power button for about 4-5 second to turn on the monitor. 4. Plug in power to camera, camera night will be on, after about 40 seconds, light will be off and you will hear an audible sound, means camera initialize finished (camera powered on). Pairing the Monitor & Camera： The unit come with camera and monitor paired for your convenience. If you have additional camera, pair your camera as follow: 1. Power on wireless monitor and wireless camera. 2. Touch …

Text truncated - open the document above for the full version.

RDI Technology (Shenzhen) Co., Ltd Section 2.911(d)(5)(i) Certification – Equipment Type Company name: RDI Technology (Shenzhen) Co., Ltd Address: Building 1#, Yongyue Road 7#, Xingtang Industrial Park, East Baishixia, Fuyong, Baoan, Shenzhen, PRC Product Name: Wireless 5” LCD Monitor FCC ID: SJ8M514 Model(s): M514 2.911(d)(5)(i) Equipment Type We, [RDI Technology (Shenzhen) Co., Ltd ] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Yuan Mike Date: 2023-12-11 Title and Company name: General Manager NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

RDI Technology (Shenzhen) Co., Ltd Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: RDI Technology (Shenzhen) Co., Ltd Address: Building 1#, Yongyue Road 7#, Xingtang Industrial Park, East Baishixia, Fuyong, Baoan, Shenzhen, PRC Product Name: Wireless 5” LCD Monitor FCC ID: SJ8M514 Model(s): M514 2.911(d)(5)(ii) Applicant filing We, [RDI Technology (Shenzhen) Co., Ltd ] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Yuan Mike Date: 2023-12-11 Title and Company name: General Manager NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

RDI Technology (Shenzhen) Co., Ltd 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: RDI Technology (Shenzhen) Co., Ltd Address: Building 1#, Yongyue Road 7#, Xingtang Industrial Park, East Baishixia, Fuyong, Baoan, Shenzhen, PRC Product Name: Wireless 5” LCD Monitor FCC ID: SJ8M514 Model(s): M514 2.911(d)(7) USA Designated Agent for Service of Process We, [RDI Technology (Shenzhen) Co., Ltd ] (“the applicant”) designate [THREE STONES MEDIA LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: THREE STONES MEDIA LLC Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 FRN: 0033401761 Contact Name: Sijie Zhang Telephone No: +1 267 909 3692 Email: [email protected] Applicant Company name: RDI Technology (Shenzhen) Co., Ltd Address: Building 1#, Yongyue Road 7#, Xingtang Industrial Park, East Baishixia, Fuyong, Baoan, Shenzhen, PRC FRN: 0011573466 FCC Grantee Code: SJ8 Contact Name: Yuan Mike Telephone No: (86)755-27308306 Email: [email protected] Signature: Signature: Title: Manager RDI Technology (Shenzhen) Co., Ltd 2.911 (d)(7)USA Agent v1.2 Title: Date: 2023-12-11 Date: 2023-12-11 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threat s- to-the-communications-supply-chain-through-the

RDI Technology (Shenzhen) Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-12-11 Subject; Request for Long Term Confidentiality FCC ID: SJ8M514 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Yuan Mike Title: General Manager

Letter of Authorization Company: RDI Technology (Shenzhen) Co., Ltd Address: Building 1#, Yongyue Road 7#, Xingtang Industrial Park, East Baishixia, Fuyong, Baoan, Shenzhen, PRC Product Name: Wireless 5” LCD Monitor Model Number: M514 FCC Identifier: SJ8M514 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Yuan Mike Date: 2023-12-11 Title: General Manager

Model:M514 External Model:M514 Model:M514 Model:M514

「 ↑｜...s5 LCD... 「 FCC 标贴 33 守 F L 哩 · · C\I Wireless 5 ” LCD Monitor Model No.: M514 Power Requirement: 5V = 1A Lithium Requirement: 3.7V= 2800mAh O pe用ting F『equency: 2.4GHz L ithium p。lymerRecha咱eable batte『Y Must be disposed proper1y. FCC ID: SJ8M514 Made in C hina THIS DEV/，αCOMPLIES 阳刑PART150F刑EFCC RυLES. OPERATION ISSU，田EσTOTHEFOLLO阳＇NG 7WO CONDITIONS: (l }THIS DEVICE MAY NOTαUSE HARMFUL INTERFERENCiι AND( 2） 刑βD EVICE Mυ!ST ACCEPT ANY INTERFERENCE刑《TMAY CAUSE UNDESIRED OPERATION. PRIVACY OF COMMUN／（到百ONS MA Y NOT BE ENSURED WHEN USING THIS D EVICE. CE 标贴 33 〈《 》更 ．．．． Model No.: M514 Power Requirement: 5V = 1A Lithium Requi陪ment:3. 7V = 2800mAh Operating Frequency: 2.4GHz Lithium Polyme『Recha『geablebatte『Y Must be disposed property. Made in China

Label Location

Model:M514 Internal Model:M514 Model:M514

TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 1 of 7 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RFExposureReport For ApplicantName:RDITechnology(Shenzhen)Co.,Ltd Address: Building1#,YongyueRoad7#,XingtangIndustrialPark,East Baishixia,Fuyong,Baoan,Shenzhen,PRC EUTName:Wireless5”LCDMonitor BrandName:RDI ModelNumber:M514 IssuedBy CompanyName:BTFTestingLab(Shenzhen)Co.,Ltd. Address: F101,201and301,Building1,Block2,TantouIndustrialPark, TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, China ReportNumber:BTF231008R00302 TestStandards:47CFRPart2SubpartJSection2.1091 FCCID:SJ8M514 TestConclusion:Pass TestDate:2023-10-09to2023-11-09 DateofIssue:2023-11-10 PreparedBy: AriaZhang/ProjectEngineer Date:2023-11-10 ApprovedBy: Ryan.CJ/EMCManager Date:2023-11-10 Note:Allthetestresultsinthisreportonlyrelatedtothetestingsamples.Whichcanbeduplicatedcompletelyforthelegalusewithapprovalof applicant;itshallnotbereproducedexceptinfullwithoutthewrittenapprovalofBTFTestingLab(Shenzhen)Co.,Ltd.,Alltheobjectionsshouldbe raisedwithinthirtydaysfromthedateofissue.Tovalidatethereport,youcancontactus. TestReportNumber:BTF231008R00302 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 2 of 7 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RevisionHistory VersionIssueDateRevisionsContent R_V02023-11-10Original Note:Oncetherevisionhasbeenmade,thenpreviousversionsreportsareinvalid. TestReportNumber:BTF231008R00302 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 3 of 7 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China TableofContents 1.Introduction.............................................................................................................................................................................................4 1.1IdentificationofTestingLaboratory..................................................................................................................................4 1.2IdentificationoftheResponsibleTestingLocation......................................................................................................4 1.3LaboratoryCondition............................................................................................................................................................4 1.4Announcement........................................................................................................................................................................4 2.ProductInformation...............................................................................................................................................................................5 2.1ApplicationInformation........................................................................................................................................................5 2.2ManufacturerInformation.....................................................................................................................................................5 2.3FactoryInformation...............................................................................................................................................................5 2.4GeneralDescriptionofEquipmentunderTest(EUT)...................................................................................................5 3.REQUIREMENT....................................................................................................................................................................................6 3.1AssessmentResult................................................................................................................................................................6 TestReportNumber:BTF231008R00302 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 4 of 7 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China 1.Introduction 1.1IdentificationofTestingLaboratory CompanyName:BTFTestingLab(Shenzhen)Co.,Ltd. Address: F101,201and301,Building1,Block2,TantouIndustrialPark,Tantou Community,SonggangStreet,Bao'anDistrict,Shenzhen,China PhoneNumber:+86-0755-23146130 FaxNumber:+86-0755-23146130 1.2IdentificationoftheResponsibleTestingLocation TestLocation:BTFTestingLab(Shenzhen)Co.,Ltd. Address: F101,201and301,Building1,Block2,TantouIndustrialPark,Tantou Community,SonggangStreet,Bao'anDistrict,Shenzhen,China Description: Allmeasurementfacilitiesusedtocollectthemeasurementdataarelocated atF101,201and301,Building1,Block2,TantouIndustrialPark,Tantou Community,SonggangStreet,Bao'anDistrict,Shenzhen,China FCCRegistrationNumber:518915 DesignationNumber:CN1330 1.3LaboratoryCondition AmbientTemperature:20°Cto25°C AmbientRelativeHumidity:45%to55% AmbientPressure:100kPato102kPa 1.4Announcement (1)Thetestreportreferencetothereporttemplateversionv0. (2)Thetestreportisinvalidifnotmarkedwiththesignaturesofthepersonsresponsibleforpreparing, reviewingandapprovingthetestreport. (3)Thetestreportisinvalidifthereisanyevidenceand/orfalsification. (4)ThisdocumentmaynotbealteredorrevisedinanywayunlessdonesobyBTFandallrevisionsareduly notedintherevisionssection. (5)Contentofthetestreport,inpartorinfull,cannotbeusedforpublicityand/orpromotionalpurposeswithout priorwrittenapprovalfromthelaboratory. (6)Thelaboratoryisonlyresponsibleforthedatareleasedbythelaboratory,exceptforthepartprovidedbythe applicant. TestReportNumber:BTF231008R00302 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 5 of 7 BTFTestin…

Text truncated - open the document above for the full version.

Totalor partialreproductionof this documentwithoutpermissionof the Laboratoryis not allowed. Page1 of 86 BTF TestingLab (Shenzhen)Co., Ltd. F101,201 and 301, Building1, Block2, TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RF Te st Report For ApplicantName :RDI Technology(Shenzhen)Co., Ltd Address: Building1#, YongyueRoad7#, XingtangIndustrialPark,East Baishixia,Fuyong,Baoan,Shenzhen,PRC EUT Name:Wireless5” LCD Monitor Brand Name:RDI ModelNumber:M514 IssuedBy CompanyName :BTF TestingLab (Shenzhen)Co., Ltd. Address: F101,201 and 301, Building1, Block2, TantouIndustrialPark, TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, China ReportNumber:BTF231008R00301 Test Standards:47 CFRPart 15.247 Test Conclusion:Pass FCC ID :SJ8M514 Test Date :2023-10-09to 2023-11-09 Date of Issue:2023-11-10 PreparedBy: Aria Zhang/ ProjectEngineer Date:2023-11-10 ApprovedBy: Ryan.CJ/ EMCMana ger Date:2023-11-10 Note: All the test resultsin this reportonly relatedto the testingsamples.Whichcan be duplicatedcompletelyfor the legal use with approvalof applicant;it shall not be reproducedexceptin full withoutthe writtenapprovalof BTF TestingLab (Shenzhen)Co., Ltd., All the objectionsshouldbe raisedwithin thirty days from the date of issue.To validatethe report,you can contactus. Test ReportNumber:BTF231008R00301 Totalor partialreproductionof this documentwithoutpermissionof the Laboratoryis not allowed. Page2 of 86 BTF TestingLab (Shenzhen)Co., Ltd. F101,201 and 301, Building1, Block2, TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RevisionHistory VersionIssueDateRevisionsContent R_V02023-11-10Original Note: Once the revisionhas been made,then previousversionsreportsare invalid. Test ReportNumber:BTF231008R00301 Totalor partialreproductionof this documentwithoutpermissionof the Laboratoryis not allowed. Page3 of 86 BTF TestingLab (Shenzhen)Co., Ltd. F101,201 and 301, Building1, Block2, TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China Table of Contents 1 INTRODUCTION..........................................................................................................................................5 1.1 Identificationof TestingLaboratory...............................................................................................5 1.2 Identificationof the ResponsibleTestingLocation......................................................................5 1.3 Announcement.................................................................................................................................5 2 PRODUCTINFORMATION.........................................................................................................................6 2.1 ApplicationInformation...................................................................................................................6 2.2 ManufacturerInformation................................................................................................................6 2.3 FactoryInformation.........................................................................................................................6 2.4 GeneralDescriptionof EquipmentunderTest (EUT) ...................................................................6 2.5 TechnicalInformation......................................................................................................................6 3 SUMMARYOF TEST RESULTS.................................................................................................................7 3.1 Test Standards..................................................................................................................................7 3.2 Uncertaintyof Test ...........................................................................................................................7 3.3 Summaryof Test Result..................................................................................................................7 4 TEST CONFIGURATION.............................................................................................................................8 4.1 Test EquipmentList .........................................................................................................................8 4.2 Test AuxiliaryEquipment..............................................................................................................10 4.3 Test Modes......................................................................................................................................10 5 EVALUATIONRESULTS(EVALUATION).................................................................................................11 5.1 Antennarequirement.....................................................................................................................11 5.1.1Conclusion:...........................................................................................................................11 6 RADIOSPECTRUMMATTERTEST RESULTS(RF) ...............................................................................12 6.1 ConductedEmissionat AC powerline ........................................................................................12 6.1.1E.U.T.Operation:..................................................................................................................12 6.1.2Test SetupDiagram:.............................................................................................................12 6.1.3Test Data:.............................................................................................................................13 6.2 OccupiedBandwidth.....................................................................................................................15 6.2.1E.U.T.Operation:..................................................................................................................15 6.2.2Test SetupDiag…

Text truncated - open the document above for the full version.

    ᢯䇔Җ      ᇒᡧ˖ᆹᑍ⡡˄␡ൣ˅、ᢰᴹ䲀ޜਨ    㿴Ṭ  di Length13    calibration  audit  make   shiqnghua   liangzhuning  dengjie  鐈(五) ㍴ 䜔䙈 抑北㔕 DESCRIPTION 产品： 2.4G Copper tube antenna 1. Electrical Properties : 1.1 Frequency Range............ 1.2 Impedance .................. 1.3 VSWR ..................... ... 1.4 Return Loss.................. 1.5 Radiation ..................... 1.6 Gain(peak)................... 2.0 dBi 1.7 Cable Loss.................. ...1.0dB Max. 1.8 Polarization............... ...LinearˈVertical 1.9 Admitted Power............ 1.10 Cable........................ Coaxial Cable 2. Physical Properties : 2.3 Tube...............Brass,Ni Piated 2.4 Operating Temp. ......... ...-10к ~ +60к 2.5 Storage Temp. ............ ...-10к ~ +70к 2.6 Color ........................ .Black ʳ 1W 2.4GHz ~ 2.5GHz 50 Nominal 1.92 : 1 Max. -10 dB Max. RF Antenna Assembly Specification Omni-directional 1. 2400 MHz 1.1 Horizontal Frequency(MHZ): 2400 Antenna Polarity: Horizontal Maximum Value(dBi): 2.00 Average Gain(dBi) : -2.48 1.2 Vertical Frequency(MHZ): 2400 Antenna Polarity: Vertical Maximum Value(dBi): -4.41 Average Gain(dBi) : -8.0 2. 2440 MHz 2.1 Horizontal Frequency(MHZ): 2440 Antenna Polarity: Horizontal Maximum Value(dBi): 1.99 Average Gain(dBi) : -2.54 2.2 Vertical Frequency(MHZ): 2440 Antenna Polarity: Vertical Maximum Value(dBi)- 4.29 Average Gain(dBi) : -8.81 Frequency(MHZ): 2480 Antenna Polarity: Horizontal Maximum Value(dBi): 1.45 Average Gain(dBi) : -3.35 3. 2480 MHz 3.1 Horizontal Frequency(MHZ): 2480 Antenna Polarity:Vertical Maximum Value(dBi): -4.95 Average Gain(dBi) : -9.06 Frequency(MHZ): 240 Antenna Polarity: Vertical Maximum Value(dBi): -4.91 Average Gain(dBi) :-9.03 3.2 Vertical

Model:M514 Conducted Emission at AC power line Band edge emissions (Radiated) Emissions in frequency bands (above 1GHz) Model:M514 Emissions in frequency bands (below 1GHz)