SKDMOJO3730Remote Control Switch

Remotely control ware operation instruction: This product major from remotely control receiver and the handle of remote control two partial groups become . remotely control receiver and motor and connection; and receive the power source of 6 V, pass through the handle of remote control boil , close for motor spin with stop remotely control . this product longest remote control is away from is 100 metres. Modifications not authorized by the manufacturer may void users authority to operate this device NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.

code circuit tone circuit radio circuit ANT

PHOTOGRAPH OF THE PRODUCT FRONT VIEW OF THE PRODUCT REAR VIEW OF THE PRODUCT

LABEL LOCATION BOTTOM VIEW OF THE DEVICE WITH FCC ID LABEL ` FCC ID Label

PHOTOGRAPH OF THE PRODUCT INNER CIRCUIT TOP VIEW INNER CIRCUIT BOTTOM VIEW

FCC ID: SKDMOJO3730 Circuit Description The 315MHz crystal oscillator drives the base of LCD the final/buffer amplifier. The modulation provided by IC. The output of N4 has the matching network consisting of L5 and C22 that limit the harmonic content and effect the proper coupling of the antenna to the output stage. Antenna, Ground and Power Source There is no external antenna. There is no external ground connection. The ground is only that of the printed circuit board. Electric current is supplied by a 12 Volt (“23A” size battery x 1) primary battery

香 港 標 準 及 檢 定 ㆗ 心 Hong Kong Standards and Testing Centre Date : 2004-10-08 TEST REPORT Page 1 of 20 No. : HM152229 This report shall not be reproduced unless with prior written approval from the Hong Kong Standards and Testing Centre. 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). Applicant: Quanzhou Hongyu Electrical Equipment & Plastic Company Limited. Wanhong Road, Zhongyang Village, Heshi Town, Luojiang District, Quanzhou Description of Samples: Model name: Remote Control Switch Model no.: MJ-001 Brand name: MOJO FCC ID: SKDMOJO3730 Date Samples Received: 2004-08-09 Date Tested: 2004-09-23 Investigation Requested: FCC Part 15 Subpart C Conclusions: The submitted product was deemed to have COMPLIED with the requirements of Federal Communications Commission [FCC] Rules and Regulations Part 15. The tests were performed in accordance with the standards described above and on Section 2.2 in this Test Report. Remarks: ---- K C Lee, EMC for Chief Executive 香 港 標 準 及 檢 定 ㆗ 心 Hong Kong Standards and Testing Centre Date : 2004-10-08 TEST REPORT Page 2 of 20 No. : HM152229 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). CONTENT: Cover Page 1 of 20 Content Page 2-3 of 20 1.0 General Details 1.1 Test Laboratory Page 4 of 20 1.2 Applicant Details Page 4 of 20 Applicant HKSTC Code Number for Applicant Manufacturer 1.3 Equipment Under Test [EUT] Page 5 of 20 Description of EUT operation 1.4 Date of Order Page 5 of 20 1.5 Submitted Samples Page 5 of 20 1.6 Test Duration Page 5 of 20 1.7 Country of Origin Page 5 of 20 1.8 Additional Information of EUT Page 6 of 20 2.0 Technical Details 2.1 Investigations Requested Page 7 of 20 2.2 Test Standards and Results Summary Page 7 of 20 3.0 Test Results 3.1 Emission Page 8-12 of 20 3.2 Bandwidth Measurement Page 13-14 of 20 香 港 標 準 及 檢 定 ㆗ 心 Hong Kong Standards and Testing Centre Date : 2004-10-08 TEST REPORT Page 3 of 20 No. : HM152229 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). Appendix A List of Measurement Equipment Page 15 of 20 Appendix B Duty Cycle Correction During 100 msec Page 16-17 of 20 Appendix C Periodic Operation Page 18 of 20 Appendix D Photographs Page 19-20 of 20 香 港 標 準 及 檢 定 ㆗ 心 Hong Kong Standards and Testing Centre Date : 2004-10-08 TEST REPORT Page 4 of 20 No. : HM152229 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). 1.0 General Details 1.1 Test Laboratory The Hong Kong Standards and Testing Centre Ltd. EMC Laboratory 10 Dai Wang Street, Taipo Industrial Estate New Territories, Hong Kong Telephone: 852 2666 1888 Fax: 852 2664 4353 1.2 Applicant Details Applicant Quanzhou Hongyu Electrical Equipment & Plastic Company Limited. Wanhong Road, Zhongyang Village, Heshi Town, Luojiang District, Quanzhou HKSTC Code Number for Applicant STS002 Manufacturer Quanzhou Hongyu Electrical Equipment & Plastic Company Limited. Wanhong Road, Zhongyang Village, Heshi Town, Luojiang District, Quanzhou 香 港 標 準 及 檢 定 ㆗ 心 Hong Kong Standards and Testing Centre Date : 2004-10-08 TEST REPORT Page 5 of 20 No. : HM152229 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). 1.3 Equipment Under Test [EUT] Description of Sample Product: Remote Control Switch Manufacturer: Quanzhou Hongyu Electrical Equipment & Plastic Company Limited. Brand Name: MOJO Model Number: MJ-001 Input Voltage: 12Vd.c. (“23A” size battery x 1) 1.3.1 Description of EUT Operation The Equipment Under Test (EUT) is a Quanzhou Hongyu Electrical Equipment & Plastic Company Limited., Remote Control Switch. The transmitter is a 2 button transmitter. The EUT continues to transmit while button is being pressed, Modulation by IC. and type is pulse modulation. 1.4 Date of Order 2004-08-09 1.5 Submitted Sample(s): 1 Sample per model 1.6 Test Duration 2004-09-23 1.7 Country of Origin China 香 港 標 準 及 檢 定 ㆗ 心 Hong Kong Standards and Testing Centre Date : 2004-10-08 TEST REPORT Page 6 of 20 No. : HM152229 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of STC: www.hkstc.org (the section “Application and Quotation”). 1.8 Additional Information of EUT Submitted Not Available User Manual Part List Circuit Diagram Printed Circuit Board [PCB] Layout Block diagram FCC ID Label 香 港 標 準 及 檢 定 ㆗ 心 Hong Kong Standards and Testing Centre Date : 2004-10-08 TEST REPORT Page 7 of 20 No. : HM152229 香港新界大埔工業村大宏街10號 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong…

Text truncated - open the document above for the full version.

TEST SET UP PHOTOGRAPH OF THE PRODUCT MEASUREMENT OF RADIATED EMISSION TEST SET UP