SLL-WM100WOMATE

Womate User Guide Overview •Womate is 3G wireless router, support maximum 7.2Mbps 3G data service; •Womate App available at App Store for free installation, no need to jailbreak; •When iPod Touch/iPad installed Womate App, iPod Touch/iPad have voice call and SMS capability; •When iPhone installed Womate App, iPhone becomes dual SIM dual Standby phone; •Womate App update aligning with iOS, support latest iPhone/iPod Touch/iPad devices. Womate Features For more information Visit http://www.womate3g.com for more information about the product manual, troubleshooting, and other related references. The company reserves the right to make changes to the product manual without notice. To view or download the latest version, go to http://www.womate3g.com . 1 Womate Device Quick Start Power On/Off •Power on or power off the Womate device. •To power on the Womate device, press and hold the power button for 3 seconds. •To power off the Womate device, press and hold the power button for 3 seconds. WIFI On/Off •Turn on or turn off WIFI of the Womate device. •To turn on WIFI, press and hold the WIFI button for 3 seconds. •To turn off WIFI, press and hold the WIFI button for 3 seconds. System Resetting Hole •When powered on, use a paperclip or similar tools to press and hold the resetting hole to reset Womate settings Introduction 2 Womate Device Quick Start 1 Power Status Light •No color and light indicates "Standby" status. •Stable red light indicates "Battery Charging" status. •Flashing red light indicates "Low Power" status. 2 WIFI Status Light •White light flashing every 3 seconds indicates "Standby" status. •White light flashing at the data transmission speed indicates "WIFI Data Transmitting" status. •No light indicates that WIFI is turned off. 3 3G Signal Status Light •White light flashing every 3 seconds indicates "Standby" status. 4 Missed Calls Status Light •Flashing white light indicates that there are missed calls or messages. Power On/Off Status Light •The four status lights flash from left to right when the Womate device is powered on. •The four status lights flash from right to left when the Womate device is powered off. Installing SIM Card Open the rear cover of the Womate device from the upper right corner and insert the SIM card into the SIM card slot. Charging Womate Battery •Use the power adapter. •Use the USB cable to connect the Womate device to a computer. 3 Introduction Womate App Quick Start •Download and install from Apple App Store. App Download and Installation 1 4 Q: I encounter a failure in Womate app installation, or after a successful installation, I encounter an error exit when opening the Womate app? A: Regarding the compatibility of different iOS versions, make sure that you are installing the latest version of Womate app. If not, delete the Womate app and download and install the latest version according to the method of ‘App Download and Installation 2’. Q&A Womate App Quick Start •Download and install Womate app from the Womate official website http://www.womate3g.com. (1)Download and install i-funbox either from the Womate official website or from http://www.i-funbox.com. (2)Start i-funbox and connect it to your iOS device. Click the icon and select Womate.ipa to install Womate app. Q&A Q: Why does i-funbox prompt that the iOS device cannot be found? A: i-funbox must invoke part of iTunes' dynamic library. The pop-up message indicates that iTunes is not installed. You need to download and install iTunes first, and then restart i-funbox to install Wmoate.ipa. 5 App Download and Installation 2 Connecting App to Device •On the iOS device, click Settings. •Click WLAN. •Turn on WLAN. •From the Choose a Network list, select WOMATE-xxxxxx (xxxxxx are 6 random letters), which is the WIFI hot point of the Womate device. •In the pop-up window, enter the password for the Womate device's WIFI hot point. Then the Womate app can be successfully connected to the Womate device. •The default password for the Womate device's WIFI hot point is womate3g. 6 Connection Setting Q: What if the password for the Womate device's WIFI hot point is not correct? A: An "incorrect password" error may occur due to the compatibility of the iOS version and the Womate device's WIFI hot point. Entering the password for twice can solve this problem. Q: What if I cannot successfully connect Womate app to Womate device? A: Take the following actions if this problem occurs: •Double press the Home key to locate the Womate app among the running applications. •Press and hold the Womate app to close it, and press the Home key again to return to the standby interface of your iOS device. •Restart the Womate app. •If the previous steps do not work, restart your iOS device. Q&A Connecting App to Device 7 •Select the Keypad tab to enter the keypad interface. •Enter the phone number and click Call to dial out. •You can create a new contact for the input phone number and store it in the All Contacts list. Keypad Using Womate App 8 Check status •Select the Status tab to check the status of Womate app features. •The following status are available on the Status tab: Switch OnOff, Battery, Signal, Network, WIFI, Mobile Data, Ring Tone, Message Tone, and Version. Changing WIFI SSID setting •On the Status tab, click WIFI. •In the pop-up window, enter the new WIFI SSID, the new password and the confirmed password. Mobile Data •Enable or disable the mobile data business through 3G in the Womate app. Note: By default, Mobile Data is enabled. Status Using Womate App 9 •Select the All Contacts tab to check the contacts in your iOS device system. •You can make changes to the contact information on the All Contacts tab. •You can dial out using the All Contacts list. •You can send messages using the All Contacts list. All Contacts Note: The All Contacts list in the Womate app will be automatically synchronized with the Contacts list in your iOS device system. When you install the Womate app for the first time and you have a large…

Text truncated - open the document above for the full version.

Report No: CCIS13040011301 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130400113RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 58 of 68 8 EUT Constructional Details Report No: CCIS13040011301 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130400113RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 59 of 68 Report No: CCIS13040011301 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130400113RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 60 of 68 Report No: CCIS13040011301 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130400113RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 61 of 68

Label Location FCC ID: SLL-WM100 FCC ID: SLL-WM100

Report No: CCIS13040011301 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130400113RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 62 of 68 Report No: CCIS13040011301 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130400113RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 63 of 68 Report No: CCIS13040011301 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130400113RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 64 of 68 Report No: CCIS13040011301 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130400113RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 65 of 68 Report No: CCIS13040011301 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130400113RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 66 of 68 Report No: CCIS13040011301 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130400113RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 67 of 68 Report No: CCIS13040011301 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130400113RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 68 of 68 ------End of report------

GCCT No.130507-R1 Page 1 of 110 FCC SAR TEST REPORT No. 130507-R1 for Shenzhen Womate Technology Co., Ltd. WOMATE Model Name: WM100 FCC ID: SLL-WM100 Issued Date: 2013-05-24 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of GCCT. Test Laboratory: GCCT, Guangdong Telecommunications Terminal Products Quality Supervision and Testing Center Technology Road, High-tech Zone, He Yuan City, Guang Dong Province, PR China 517001 Tel:+86(0)762-3607139, Fax:+86(0)762-3603336 Email: [email protected]. www.ncct.org.cn GCCT No.130507-R1 Page 2 of 110 TABLE OF CONTENTS 1. General Information ............................................................................ 4 1.1 Testing Laboratory ...................................................................... 4 1.2 Application Information ............................................................... 4 1.3 Manufacturer Information............................................................ 4 1.4 EUT Information.......................................................................... 5 2. EUT Operational Conditions During Test............................................ 6 2.1 General Description of Test Procedures..................................... 6 2.2 GSM Test Configuration ............................................................. 6 2.3 WCDMA Test Configuration........................................................ 6 2.4 WiFi Test Configuration .............................................................. 7 3. SAR Measurements System Configuration......................................... 8 3.1 Measurement System Diagram .................................................. 8 3.2 System Components................................................................... 9 3.3 Equivalent Tissues.................................................................... 12 4. Evaluation Procedures...................................................................... 13 4.1 Data Evaluation......................................................................... 13 4.2 SAR Evaluation Procedures ..................................................... 14 4.3 Spatial Peak SAR Evaluation.................................................... 15 5. Test Laboratory Environment............................................................ 17 6. Conducted Output Power Measurement........................................... 18 7. SAR Measurement Results............................................................... 20 7.1 Liquid Measurement Results .................................................... 20 7.2 System Performance Check ..................................................... 21 7.3 Measurement Results ............................................................... 23 8. Measurement Uncertainty ................................................................. 28 9. EUT Photo and Test Positions .......................................................... 29 10. Equipment List & Calibration Status ................................................. 32 11. Attachments ...................................................................................... 33 ANNEXE 1 System Performance Check Plots ....................................... 34 ANNEXE 2 SAR Test Plots .................................................................... 37 ANNEXE 3 Probe calibration report ....................................................... 68 ANNEXE 4 Dipole calibration report....................................................... 80 ANNEXE 5 DAE calibration report ....................................................... 105 GCCT No.130507-R1 Page 3 of 110 GENERAL SUMMARY Product Name WOMATE Model Name WM100 Applicant Shenzhen Womate Technology Co., Ltd. Manufacturer Shenzhen Womate Technology Co., Ltd. Test laboratory GCCT, Guangdong Telecommunications Terminal Products Quality Supervision and Testing Center Reference Standards OET Bulletin 65 (Edition 97-01) and Supplement C (Edition 01-01): Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits IEEE Std C95.1, 1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz IEEE 1528-2003: Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques FCC KDB 447498 D01 v05: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies FCC KDB 865664 D01 v01: SAR Measurement Requirements for 100 MHz to 6 GHz FCC KDB 248227 D01 v01r02: SAR measurement Procedures for 802.11a/b/g Transmitters IEC 62209-1: 2006: Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures, Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz) IEC 62209-2: 2010: Human exposure to radio frequency fields from handheld and body-mounted wireless communication devices - Human models, instrumentation, and procedures, Part 2: Procedure to determine the specific absorption rate (SAR) for mobile wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) Test Conclusion This portable wireless equipment has been measured in all cases requested by the relevant standards. Test results in Chapter 7 of this test report are below limits specified in the relevant standards. General Judgment: Pass Date of issue:2013.05.24 Comment: The test results in this report apply only to the tested sample of the stated device/equipment. Approved by: Reviewed by: Tested by: Deputy Manager Deputy Manager Test Engineer FCC KDB 941225 D07 UMPC Mini Tablet Devices v01: S AR Evaluation Proced…

Text truncated - open the document above for the full version.

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCIS13040011301 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1. Cover Page FCC REPORT Applicant: Shenzhen Womate Technology Co., Ltd. Address of Applicant: Room 304, 3F, Tower B, Huayuan Digital Building, No.1079 Nanhai Road, Nanshan District, Shenzhen, China Equipment Under Test (EUT) Product Name: WOMATE Model No.: WM100 FCC ID: SLL-WM100 Applicable standards: FCC CFR Title 47 Part 2: 2011 FCC CFR Title 47 Part22 Subpart H: 2011 FCC CFR Title 47 Part24 Subpart E: 2011 Date of sample receipt: 24 Apr., 2013 Date of Test: 25 Apr., to 16 May 2013 Date of report issued: 17 May 2013 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No: CCIS13040011301 2. Version Version No. Date Description 00 17 May 2013 Original Prepared By: Date: 17 May 2013 Report Clerk Check By: Date: 17 May 2013 Project Engineer Report No: CCIS13040011301 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130400113RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 68 3. Contents Page 1. COVER PAGE .............................................................................................................................................................. 1 2. VERSION ....................................................................................................................................................................... 2 3. CONTENTS ................................................................................................................................................................... 3 4. TEST SUMMARY ......................................................................................................................................................... 4 5. GENERAL INFORMATION ........................................................................................................................................ 5 5.1 CLIENT INFORMATION ............................................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................................... 5 5.3 TEST MODES .......................................................................................................................................................... 8 5.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................................................ 8 5.5 LABORATORY FACILITY.......................................................................................................................................... 8 5.6 LABORATORY LOCATION ....................................................................................................................................... 8 5.7 TEST INSTRUMENTS LIST ....................................................................................................................................... 9 6. SYSTEM TEST CONFIGURATION AND MEASUREMENT DATA .................................................................. 10 6.1 EUT CONFIGURATION ......................................................................................................................................... 10 6.2 EUT EXERCISE .................................................................................................................................................... 10 6.3 CONFIGURATION OF TESTED SYSTEM ................................................................................................................ 10 6.4 DESCRIPTION OF TEST MODES ........................................................................................................................... 10 6.5 CONDUCTED OUTPUT POWER ............................................................................................................................ 11 6.6 OCCUPY BANDWIDTH .......................................................................................................................................... 15 6.7 MODULATION CHARACTERISTIC .......................................................................................................................... 27 6.8 OUT OF BAND EMISSION AT ANTENNA TERMINALS .............................................................................................. 27 6.9 ERP, EIRP MEASUREMENT ............................................................................................................................... 41 6.10 FIELD STRENGTH OF SPURIOUS RADIATION MEASUREMENT ............................................................................... 44 6.11 FREQUENCY STABILITY V.S. TEMPERATURE MEAS…

Text truncated - open the document above for the full version.

Report No: CCIS13040011301 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130400113RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 57 of 68 7 Test Setup Photo Radiated Spurious Emission