SN5SOFTPADS1Foldable NFC Wireless Keyboard for Android smart phones

Battery warning! Risk of explosion or personal injury if batteries are replaced with incorrect type, mutilated, or exposed to con- ducting material, liquid, fire or heat (above 56 degree Celsius). Do not use or recharge damaged recharge- able batteries. Do not mix battery types. Dispose of spent or damaged batteries according to manufacturer instructions and local laws. Changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio fre- quency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer- ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Declaration of Conformity Supplier name: One2touch AS Supplier address: Tollbugaten 24, 0157 Oslo, Norway Declares that the product name and model: Softpad S1 Product operation: all Confirms to the following product specifications and regulation: EMC standard: EN 301489-3/1 Radio standard: NFC 13,56MHz: EN 302291 Safety standard: EN 60950-1 The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC directive 2004/108/EC, the R&TTE directive 1999/5/EC, and carries the CE-marking accordingly. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condi- tions: (1) This device may not cause harmful interference, and (2) this device must accept any inter- ference received, including interference that may cause undesired operation. DoC can be downloaded from www.one2touch.no The product and packaging will bear the following marks: Environmental information (Applicable in the European countries with separate collection systems). Disposal of waste batteries. This product may contain batteries. If so, this symbol on the batteries means that they shall not be disposed with other household waste. Instead they shall be handed over to the appropriate collection point for the recycling of batteries. The batteries do not contain Mercury, Cadmium or Lead above the levels defined by the battery directive 2006/66/EC. For your safety, please view the product manual how to remove the batteries from the product safety. Disposal of old electrical & electronic equipment. This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the appropriate collection point for the recycling of electrical and electronic equipment. The recycling of materials will help to conserve natural resources. By ensuring this product and its batteries are disposed of correctly, you will prevent potential negative consequences for the environment and human health, which otherwise be caused by inappropriate waste handling of them. For more detailed information about the recycling of these batteries or this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Information updated per: 2013-04-30 User guide 1 Enable NFC in your smartphone settings 2 Place your phone on the NFC tag, or search for “one2touch” on Google Play, to download the one2touch driver. 3 Place your phone on the NFC keyboard and follow the on-screen instructions* to enable the one2touch keyboard FOLDING: BATTERY CHANGE: STEP-BY-STEP 1. Pull out the battery drawer 2. Remove old batteries 3. Insert new CR2025 batteries 4. Re-insert battery drawer Old batteries Replacement batteries Only use (Lijia) CR2025 batteries STRAP: Smartphone setup *For step by step picture setup, visit www.one2touch.no DO NOT TWIST: For more information, visit www.one2touch.no Nothing happens when placing the phone on the keyboard Have you installed the one2touch driver? Use the NFC tag that came with the keyboard, or search for “one2touch” on Google Play to install the driver. Follow the on-screen instructions for first time setup when connecting the phone to the keyboard. Troubleshooting Does the phone have power? Are there batteries in the NFC Keyboard? Does the phone support NFC? Is NFC enabled in your phone? Is the phone within the antenna area? Connect your phone to a charger Open the battery drawer and make sure the batteries are inserted Check the documentation for your phone Check your wireless settings to enable NFC. (check phone documentation for instructions) Make sure the phone has sound on and the keylock is off, then move the phone around on the keyboard until you hear a beep. The phone connects to the keyboard (audible beep), but nothing happens when I press the keys.

'13th May 2013 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada KMH2 Attn: Director of Certification Authoritv to Act as Agent On our behalf, I appoint Nemko ÆS, Instituttveien 6, N-2007 Kjeller, Norway, to act as our agent in the preparation of this application for equipment certification. I cedify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission's regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for cedification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with, One2touch AS, C/o Televenture, Tollbugaten 24, 01 57 Oslo 20 13 of May Dated 13 this Signature Title: SCM Agency agreement expiration date: 7 May 2014 By: Arild Terland Printed On behalf of : Telephone: +47 98293370

#f'!tr?T#u#H COVER LETTER One2TOUCH has appointed NEMKO to test and approve our products for FCC approval. One2TOUCH develop and manufacture smart phone keyboards based on NFC wireless technology. Softpad products are designed to be the first wireless mobile phone keyboard which is based on the Near Field Communication (NFC) technology. Advantages compared to similar products based on other wireless technologies are; security, low power consumption and easy pairing. Whenever a NFC activated phone is placed within the range of the keyboard antenna, a negotiation is started. The phone induces a 13.56MH2 signal onto the keyboard antenna which provides a carrier for communication between phone and keyboard. Fredrikstad, 13'n May 2013 A*k'rrl -t Arild Terland SCM Fredrikstad one2TOUCH, C/o Televenture, Tollbugaten 24,01 57 Oslo, Norway Foretaksregisteret/Register of Business Enterprises: NO 994 4BS 776 MVA www.one2touch.no

13th May 2013 Equipment Autorisation, Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC lD: SNSSOFTPADSI Product Name: one2touch, Softpad Sl Request for Confidentialitv Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality - for example ...) . Schematics . Block diagram . OperationalDescription . Bill of Material . Technicaldescription These materials contain trade secrets and proprietary information and customarily released to the public. The public disclosure of this information harmful to the company and provide unjustified benefits to our competitors. are not might be Dated this 13th Day of May 20 13 Arild Terland Printed Title: SCM On behalf of : One2touch AS Telephone: +4798293370

EXTERNAL PHOTOS Project no.: 236125 FCC ID: SN5SOFTPADS1 Page 1 of 1 EXTERNAL PHOTOS – Softpad S1 Front view, Softpad S1 Rear view, Softpad S1

A DETAIL A SCALE 5 : 1 CONFIDENTIAL Notice on Reduction of Harmful Substances (RoHS) To conform with EU directive 2002/95/EC, the following materials and their compounds shall not be used in the product(s) specified herein: Lead, Mercury, Cadmium, Hexavalent, Chromium, Polybromobiphenyls (PBBs), Polybromodiphenylethers (PBDEs), Tributyltinoxide (TBTO), Polychlorobiphenyls (PCBs), Polychlornaphtalens, Asbestos, Azo pigments and dyes, Ozone depleting substances, Polyvinylchloride (PVC). UNLESS OTHERWISE STATED DIMENSIONAL TOLERANCES ACCORDING TO: DRAWN BY:DATE: DATE: DATE: DATE: ENGINEERING: MATERIAL:PRODUCTION: APPROVED: PART NAME: SIZE:PART NO:DWG. NO: EKER DESIGN 3D / DWG. NAME:SHEET:SCALE: © EKER DESIGN AS Torsnesvn. 210B 1634 Gml. Fredrikstad, Norway Tlf. +47 69948900, Fax. +47 69948999 All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. REV.: A3 KHB 1:2 03-Des-12 -- - - - - KHB - - 265-511-33-B REV AFFECTED GEOMDWG DESCRIPTION CHECK`D BYDRAWN BYDATE O2T Softpad S1 Bottom artwork - Laser engraved SN O2T Softpad S1 bottom.sldprt 1/1 AYYReleased drawingKHBKHB19-12-12 BYYUpdated graphics, renamedEMBEMB17-Apr-13 44,5 2,0 17,5 Font: Roman Font style: Regular Size: 8 points Laser engraved Font: Myriad Pro Font style: Regular Size: 8 points Printed PANTONE Cool Gray 5C SN:AB0123456789 Made in China For batteries see user-instructions MODEL: Softpad S1 FCC ID: SN5SOFTPADS1 Text 1:1 SN:AB0123456789 Made in China For batteries see user-instructions Model: Softpad S1 FCC ID AAASOFTPADS1 Model: Softpad S1 FCC ID AAASOFTPADS1 SN:AB0123456789 Made in China For batteries see user -instructions SN:AB0123456789 Softpad S1 Made in China For batteries see user-instructions

Tune-Up procedure There is no possibility to tune the output power for any one2touch products. Fredrikstad, 13th May 2013 #NS2TilUCH I#{JI-S å rrff tu{Ø/ Arild Terland SCM Fredrikstad one2TOUCH, C/o Televenture, Tollbugaten 24, 0157 Oslo, Nonivay Foretaksregisteret/Register of Business Enterprises: No 994 4gs 776 MvA www.one2touch.no

Nemko AS, Gaustadalléen 30, P.O.Box 73 Blindern, NO-0314 Oslo Norway T +47 22 96 03 30 F +47 22 96 05 50 Enterprise number NO974404532 Visiting address: Nemko Kjeller, Instituttveien 6, P.O.Box 96, NO-2027 Kjeller Norway T +47 64 84 57 00 F +47 64 84 57 05 Test report no. : 236125-4 Item tested : One2touch Softpad S1 Type of equipment : NFC/RFID Cell Phone Keyboard 13.56 MHz FCC ID : SN5SOFTPADS1 Client : One2touch AS FCC Part 15.225 Low Power Transmitter 13.110 - 14.010 MHz Band RSS-210, Issue 8 Low-Power Licence-exempt Radiocommunications devices 13.110 - 14.010 MHz Band 22 May 2013 Authorized by : .............................................. Frode Sveinsen Technical Verificator TEST REPORT FCC part 15.225 Project no.: 236125-4 FCC ID: SN5SOFTPADS1 Nemko AS, NO-2027 Kjeller Page 2 (18) CONTENTS 1 GENERAL INFORMATION ...................................................................................................... 3 1.1 Testhouse info .......................................................................................................................... 3 1.2 Client information ...................................................................................................................... 3 1.3 Manufacturer (if other than client) ............................................................................................. 3 2 TEST INFORMATION ............................................................................................................... 4 2.1 Test item ................................................................................................................................... 4 2.2 Test environment ...................................................................................................................... 5 2.3 Test period ................................................................................................................................ 5 3 TEST REPORT SUMMARY ..................................................................................................... 6 3.1 General ..................................................................................................................................... 6 3.2 Test summary ........................................................................................................................... 7 3.3 Description of modification for modification filing ...................................................................... 7 3.4 Comments ................................................................................................................................ 7 3.5 Family list rationale ................................................................................................................... 7 4 TEST RESULTS ....................................................................................................................... 8 4.1 Occupied Bandwidth ................................................................................................................. 8 4.2 Peak power output .................................................................................................................. 10 4.3 Spurious emissions (radiated) ................................................................................................ 12 4.4 Transmitter Frequency Stability .............................................................................................. 15 5 LIST OF TEST EQUIPMENT .................................................................................................. 16 6 BLOCK DIAGRAM ................................................................................................................. 17 6.1 System set up for radiated measurements ............................................................................. 17 6.2 Test site radiated emission ..................................................................................................... 18 TEST REPORT FCC part 15.225 Project no.: 236125-4 FCC ID: SN5SOFTPADS1 Nemko AS, NO-2027 Kjeller Page 3 (18) 1 GENERAL INFORMATION 1.1 Testhouse info Name : Nemko AS Address : Nemko Kjeller Instituttveien 6, Box 96 NO-2027 Kjeller, NORWAY Telephone : +47 64 84 57 00 Fax : +47 64 84 57 05 Email: [email protected] FCC test firm : 994405 IC OATS : 2040D-1 Total Number of Pages: 18 1.2 Client information Name : One2touch AS Address : Tollbugaten 24,0157 Oslo, Norway Telephone : 98293370 Contact: Name : Arild Terland E-mail : [email protected] 1.3 Manufacturer (if other than client) -“- TEST REPORT FCC part 15.225 Project no.: 236125-4 FCC ID: SN5SOFTPADS1 Nemko AS, NO-2027 Kjeller Page 4 (18) 2 TEST INFORMATION 2.1 Test item Name : One2touch Model/version : Softpad S1 FCC ID: SN5SOFTPADS1 IC ID: - Serial number : - Hardware identity and/or version: - Software identity and/or version : - Operating frequency: 13.56MHz Assigned frequency band : 13.553 – 13.567MHz Tuneable Bands : None Number of Channels : One Operating Modes : TX & RX Type of Modulation : FSK User Frequency Adjustment : None Rated Output Power : NA (Keyboard is slave device) Type of Power Supply : Primary Batteries Antenna Connector : Integral loop antenna Antenna Diversity Supported : N/A Description of Tested Device(s) One2touch softpad S1 is NFC wireless keyboard for mobile phones with NFC facility. It operates in 13.56MHz frequency band. TEST REPORT FCC part 15.225 Project no.: 236125-4 FCC ID: SN5SOFTPADS1 Nemko AS, NO-2027 Kjeller Page 5 (18) 2.2 Test environment 2.2.1 Normal test condition Temperature: 20 – 21 °C Relative humidity: 29 – 43 % Normal test voltage: 3.0 V DC (2x CR2025 Lithium batteries connected in parallel) The values are the limit registered during the test period. 2.3 Test period Item received date: 2013-04-24 Test period : from 2013-04-24 to 2013-04-29 TEST REPORT FCC part 15.225 Project no.: 236125-4 FCC ID: SN5SOFTPADS1 Nemko AS, NO-2027 Kjeller Page 6 (18) 3 TEST REPORT SUMMARY 3.1 General Manufacturer: One2tou…

Text truncated - open the document above for the full version.

Photos of Test Set-up Project no.:236125 FCC ID:SN5SOFTPADS1 Page1of2 PHOTOS OF TEST SET-UP–Softpad S1 XY plane-Radiated Emissions Radiated emissions-< 30MHz, 10meter Photos of Test Set-up Project no.:236125 FCC ID:SN5SOFTPADS1 Page2of2 RadiatedEmissions30-1000MHz, 3 meter