SN6LD4210Part 18 Consumer Device

LatteDuzio 2 3 FCC NOTICE:FCC NOTICE: LatteDuzio LimitedLatteDuzio Limited 4 5 "75°" for heated milk "65°" for heated milk Snowflake for cold milk 6 7 Pres s ＂ ＂ ＂ 65° ＂ symbol for heated milk. or 75° Press snowflake symbol for cold milk. The frother takes approximately 180 seconds to prepare heated milk in ＂65°＂ model, need for 200 seconds to prepare heated milk in＂75°＂model, and for 90 seconds to prepare cold milk in snowflake model. The froth work will stop automatically. 8 a) A short power-supply cord (or detachable power-supply cord) is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. b) Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use. c) If a long detachable power-supply cord or extension cord is used: 1) The marked electrical rating of the detachable power- supply cord or extension cord should be at least as great as the electrical rating of the appliance; 2) If the appliance is of the grounded type, the extension cord should be a groundingtype 3-wire cord; and 3) The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over. 9 LatteDuzio Limited LatteDuzio LatteDuzio LatteDuzio LatteDuzio LatteDuzio LatteDuzio 10 11

Global On International Ltd. Unit A5,17/F, Superluck Industrial Centre Phase 2.57 Sha Tsui Road, Tsuen Wan, Hong Kong DATE :2013-03-27 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint ATC Lab Co., Ltd ( Guangdong, China) (Name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Global On International Ltd. Unit A5,17/F, Superluck Industrial Centre Phase 2.57 Sha Tsui Road, Tsuen Wan, Hong Kong ( applicant name and address) Dated this / Day of 03/27/2013 / Agency agreement expiration date: 03/27/2014 B y: Sarah Chan Signature Printed Title: General Manager On behalf of : Global On International Ltd. Telephone: +852 35905532

Global On International Ltd. Unit A5,17/F, Superluck Industrial Centre Phase 2.57 Sha Tsui Road, Tsuen Wan, Hong Kong Request for Confidentiality: MUST BE ON COMPANY LETTERHEAD AND SIGNED BY OFFICIAL OF APPLICANT COMPANY DATE 2013-03-27 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: SN6LD4210 Product Name: Induction Frother Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, we hereby request that the following documents be held confidential: • Schematics • Block diagram • Part list • Operational description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this / Day of 03/27/2013 / By: Sarah Chan Signature Printed Title: General Manager On behalf of : Global On International Ltd. Telephone: +852 35905532

Th e are ,LD All T e models e as below D4260,LD the mode The To: ATC s of our co w:LD410 D4258,LD el s are s Signatu e Diffe Lab Co., ompany’s 0,LD4150 D4268. same, jus App re of ap p rence , Ltd (Gu s LD41 0,LD4160 st have di licant: G plicant: S Date: 2 e Introd uangdong 108 0,LD4158 fferent ap Global On Sarah Ch 2013-03-2 ductio g, China 8,LD4168 ppearanc n Internat han 27 on ) 8, LD4250 ce. ional Ltd 0 .

External Photos of EUT Sample

Label of LD4108 Label Location for LD4108 Ratin g label Bk bd g B ac k b oar d

Internal Photos of EUT Sample

ATC Lab Co., Ltd (Guangdong, China) 205#, Yingfeng Building, Ronggu Rd, Ronggui,Shunde,Foshan,Guandong,China. Tel:+86 757-28375537 Fax: +86 757-28375535 FCC ID: SN6LD4210 Report No.: FCC130318002 Page: 1 of 13 Authorized Signature: Louis Lu Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of ATC Technology Approvals or testing done by ATC Technology Approvals in connection with, distribution or use of the product described in this report must be approved by ATC Technology Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. FCC REPORT Application No.: FCC130301002 Applicant: Global On International Ltd. Address of Applicant: Unit A5,17/F, Superluck Industrial Centre Phase 2.57 Sha Tsui Road, Tsuen Wan, Hong Kong FCC ID: SN6LD4210 Equipment Under Test (EUT): EUT Name: Induction Frother Item No.: LD4100,LD4150,LD4160,LD4108,LD4158,LD4168,LD4250,LD4260,LD4258, LD4268 Serial No.: Not supplied by client Standards: FCC Part 18:2009 Date of Receipt: 01 March,2013 Date of Test: 04 March,2013 to 11 March,2013 Date of Issue: 18 March,2013 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. ATC Lab Co., Ltd (Guangdong, China) Report No.: FCC130318002 Page: 2 of 13 FCC ID: SN6LD4210 Test Summary Test Test Requirement Test Method Standard Paragraph Result Conducted Emission FCC PART 18:2009 FCC MP-5:1986 Section 18.307(a) PASS Radiated Emission FCC PAR 18:2009 FCC MP-5:1986 Section 18.305(b) PASS The model LD4108 was chosen to be tested in the report. ATC Lab Co., Ltd (Guangdong, China) Report No.: FCC130318002 Page: 3 of 13 FCC ID: SN6LD4210 1 Contents Page 1 TEST SUMMARY .................................................................................................................................................... 2 2 CONTENTS .............................................................................................................................................................. 3 3 GENERAL INFORMATION ................................................................................................................................... 4 3.1 CLIENT INFORMATION ....................................................................................................................................... 4 3.2 GENERAL DESCRIPTION OF E.U.T. .................................................................................................................. 4 3.3 TEST LOCATION ................................................................................................................................................ 4 3.4 TEST SUPPORTING SYSTEM DETAILS .............................................................................................................. 4 3.5 TEST FACILITY ................................................................................................................................................... 5 3.6 MEASUREMENT UNCERTAINTY ......................................................................................................................... 5 3.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER .................................................................................. 5 4 EQUIPMENT USED DURING TEST .................................................................................................................... 6 5 TEST RESULTS ...................................................................................................................................................... 7 5.1 CONDUCTED EMISSIONS ................................................................................................................................... 7 5.1.1 Test Setup .................................................................................................................................................. 8 5.1.2 Test Procesure ........................................................................................................................................... 8 5.1.3 Measurement Data .................................................................................................................................... 8 5.2 RADIATED EMISSIONS ..................................................................................................................................... 10 5.2.1 Test Setup ................................................................................................................................................ 11 5.2.2 Test Prosesure ......................................................................................................................................... 12 5.2.3 Measurement Data .................................................................................................................................. 12 ATC Lab Co., Ltd (Guangdong, China) Report No.: FCC130318002 Page: 4 of 13 FCC ID: SN6LD4210 2 General Information 2.1 Client Information Applicant: Global On International Ltd. Address of Applicant: Unit A5,17/F, Superluck Industrial Centre Phase 2.57 Sha Tsui Road, Tsuen Wan, Hong Kong Manufacturer ETERNAL (GUANGDONG) ELECTRIC HOLDING LTD Address of Manufacturer B5 South Longzhou Road,Longjiang Committee,Longjiang Town,Shunde District,Foshan,Guangdong P.R.China 2.2 General Description of E.U.T. Equipment Under Test: Induction Frother Trade Name: LATTE DUZIO Model Number: LD4100,LD4150,LD4160,LD4108,LD4158,LD4168,LD4250,LD4260 ,LD4258,LD4268 Power Supply: AC 120V,60Hz Date of Test: 04-1…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOGRAPHS 1. Conducted Emission Test Setup 2. Radiated Emission Test Setup