SNI91014R27MHZRemote Control Car Series

User Manual Remote control car series 91014 、 SKU:11863301 Use instruction 1) Turn the power switch of car-body to “ON” position; 2) When the user control the control stick, the LED light will be turn on; When the light is turning dimmer, the batteries are to be replaced; 3) Operate the handle of the controller, the car can move Forward and Backward clockwise. After play, turn the power switches of car-body to “OFF” position. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment such modifications could void the user authority to operate the equipment. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Distributed by: DOLGENCORP, LLC 100 Mission Ridge Goodlettsville, TN 37072-2170 Tel:6158554000 Fax:6158554530

Block Diagram ANT 27.145MHz Modulator and amplifier Oscillator 27.145 MHz Encoder TX-2 Control keys Power 3.0VDC AA batteries *2

INTERTEK TESTING SERVICE Report No.: 13030731HKG-001 FCC ID: SNI91014R27MHZ Equipment Photographs Model : 91014 (External)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Size:40mmx18mm FCC ID:SNI91014R27MHZ

INTERTEK TESTING SERVICE Report No.:13030731HKG-001 FCC ID: SNI91014R27MHZ Equipment Photographs Model : 91014 (Internal) INTERTEK TESTING SERVICE Report No.:13030731HKG-001 FCC ID: SNI91014R27MHZ Equipment Photographs Model : 91014 (Internal) INTERTEK TESTING SERVICE Report No.:13030731HKG-001 FCC ID: SNI91014R27MHZ Equipment Photographs Model : 91014 (Internal) INTERTEK TESTING SERVICE Report No.:13030731HKG-001 FCC ID: SNI91014R27MHZ Equipment Photographs Model : 91014 (Internal)

Model: 91014(Transmitter portion) Technical Description of Transmitter The Equipment Under Test (EUT) is a transmitter of a RC Car system, which is operating at 27.145MHz as dictated by a crystal. The EUT is powered by 2 x 1.5V AA size batteries. The EUT has a pair of control keys and a red LED indicator. After switching ON the EUT and its corresponding receiver (i.e. car), activating the control key on the EUT can control the receiver moving forward, backward, left and right. The circuit of the transmitter comprises of, 1. An Encoding circuit Consisting: SW1,SW2,SW3,SW4TX-2B 2. A RF Oscillator (27.145MHz) Consisting: 27.145MHz 3. A Filter Network Consisting: L1,L3,L2,C4 4. A RF Modulator and Amplifier Consisting: Q1, Q2 5. A Power Supply Consisting: 2 x AA size batteries The transmitter uses an external, integral and telescope-type. Antenna Type: External, Integral antenna Antenna Gain: 0dBi Nominal rated field strength: 77.0dBμV/m at 3m Maximum allowed field strength of production tolerance: +/- 3dB

Analysis Report Report No.: 13030731HKG-001 The Equipment Under Test (EUT) is a transmitter of a RC Car system, which is operating at 27.145MHz as dictated by a crystal. The EUT is powered by 2 x 1.5V AA size batteries. The EUT has a pair of control keys and a red LED indicator. After switching ON the EUT and its corresponding receiver (i.e. car), activating the control key on the EUT can control the receiver moving forward, backward, left and right. Antenna Type: External, Integral antenna Antenna Gain: 0dBi Nominal rated field strength: 77.0dBμV/m at 3m Maximum allowed field strength of production tolerance: +/- 3dB According to the KDB 447498: Based on the Maximum allowed field strength of production tolerance was 80.0 dBμV/m at 3m in frequency 27.145MHz, thus; The EIRP = [(FS*D) ^2*1000 / 30] = 0.03mW Conducted power = Radiated Power (EIRP) – Antenna Gain So; Conducted Power =0.03mW. The SAR Exclusion Threshold Level for 27.145MHz when the minimum test separation distance is < 50mm: = [474 * (1 + log100/f(MHz))]/2 = 371.2mW Since the above conducted output power is well below the SAR Exclusion threshold level, so the EUT is considered to comply with SAR requirement without testing.

- The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com TEST REPORT Report No.: 13030731HKG-001 Guangdong Shifeng Toys Industrial Co., Ltd. Application For Certification (Original Grant) (FCC ID: SNI91014R27MHZ) Transmitter Prepared and Checked by: Approved by: Signed on File Lee Shui Tim, Tim Assistant Engineer Chan Chi Hung, Terry Assistant Supervisor Date: April 23, 2013 INTERTEK TESTING SERVICES Report No.: 13030731HKG-001 FCC ID: SNI91014R27MHZ i GENERAL INFORMATION Guangdong Shifeng Toys Industrial Co., Ltd. BRAND NAME: N/A, MODEL: 91014 FCC ID: SNI91014R27MHZ Grantee: Guangdong Shifeng Toys Industrial Co., Ltd. Grantee Address: Chenghua Industrial Zone, Wenguan Road, Chenghai District, Shantou City, Guangdong Province, China. Contact Person: Jack Zhou Tel: 86 754-85898699 Fax: 86 754-85897699 e-mail: N/A Manufacturer: N/A Manufacturer Address: N/A Brand Name: N/A Model: 91014 Additional Model: SKU: 11863301 Type of EUT: Transmitter Description of EUT: Remote Control Car Series Serial Number: N/A FCC ID: SNI91014R27MHZ Date of Sample Submitted: March 18, 2013 Date of Test: March 18, 2013 to March 23, 2013 Report No.: 13030731HKG-001 Report Date: April 23, 2013 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% INTERTEK TESTING SERVICES Report No.: 13030731HKG-001 FCC ID: SNI91014R27MHZ ii SUMMARY OF TEST RESULT Guangdong Shifeng Toys Industrial Co., Ltd. BRAND NAME: N/A, MODEL: 91014 FCC ID: SNI91014R27MHZ TEST SPECIFICATION REFERENCE RESULTS Transmitter Field Strength 15.227 Pass The equipment under test is found to be complying with the following standards: FCC Part 15, October 1, 2011 Edition Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is considered sufficient to comply with the pervisions of this section. 2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. INTERTEK TESTING SERVICES Report No.: 13030731HKG-001 FCC ID: SNI91014R27MHZ iii Table of Contents 1.0 General Description....................................................................................... 1 1.1 Product Description .......................................................................................... 1 1.2 Related Submittal(s) Grants.............................................................................. 1 1.3 Test Methodology............................................................................................. 1 1.4 Test Facility ...................................................................................................... 1 2.0 System Test Configuration ............................................................................ 2 2.1 Justification ...................................................................................................... 2 2.2 EUT Exercising Software.................................................................................. 2 2.3 Special Accessories ......................................................................................... 2 2.4 Equipment Modification .................................................................................... 2 2.5 Measurement Uncertainty................................................................................. 3 2.6 Support Equipment List and Description ........................................................... 3 3.0 Emission Results ........................................................................................... 4 3.1 Field Strength Calculation................................................................................. 4 3.2 Radiated Emission Configuration Photograph................................................... 5 3.3 Radiated Emission Data ................................................................................... 5 4.0 Equipment Photographs ................................................................................ 7 5.0 Product Labelling........................................................................................... 7 6.0 Technical Specifications ................................................................................ 7 7.0 Instruction Manual ......................................................................................... 7 8.0 Miscellaneous Information............................................................................ 7 8.1 Measured Bandwidth........................................................................................ 8 8.2 Discussion of Pulse Desensitization........................…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICE Report No: 13030731HKG-001 FCC ID: SNI91014R27MHZ Configuration Photographs Worst-Case Radiated Emissions (Front View) Model : 91014 INTERTEK TESTING SERVICE Report No: 13030731HKG-001 FCC ID: SNI91014R27MHZ Configuration Photographs Worst-Case Radiated Emissions (Back View) Model : 91014