SRQ-C330WCDMA Digital Mobile Phone Handset

Android Mobile Phone User Manual - 1 - Using your phone Thanks for choosing the C330, It’s a WCDMA Digital Mobile Phone, which will refer to as ‘phone’ from now on. Powered by Android TM , the phone supports 3G high- speed Internet access, which brings you brand new experiences. Don’t worry if the pictures we use to demonstrate your phone’s functions look a little different from what you see on the screen. It’s the functions that matter. - 2 - Before getting started Inserting and removing the SIM 1. Switch off your phone and disconnect any external power. 2. Remove the back cover and then the battery. 3. Hold your SIM on the cut corner, and slide it face down into the card holder. 4. Insert the battery. 5. Replace the back cover. Inserting a memory card 1. Remove the back cover. 2. Push tightly until the card is installed in the correct position and replace the back cover. - 3 - Using the battery Inserting the battery 1. Open the battery cover on the back of your phone. 2. Align the battery's contact points with those of the phone and gently press the battery down into place. 3. Replace the battery cover clicking it back into position. Removing the battery 1. Switch off your phone. 2. Open the battery cover. - 4 - 3. Lift the battery up and out of your phone. Charging the battery The battery is not fully charged when you unpack it for the first time. Please exhaust the capacity of the battery before you recharge it for the first time .To ensure the battery is always in its best condition, please charge the battery 8 hours for the first time and recharge it later at least 2 hours each time. 1. Connect the charger to the phone, and insert the charger to the standard power socket. 2. Please disconnect the charger from the power socket after the charging is completed. Tips:  To c harge t he bat tery, y ou c an al so c onnect t he phone to the PC through the USB cable.  During charging, t he p hone and c harger m ay normally become hot. - 5 - Headset jack Earpiece Power key Front camera Touch screen Menu key Home key Back key Camera Volume Speaker Microphone USB port Getting to know your phone - 6 - Descriptions of Keys Keys Functions Menu key Touch it to open a menu with items that affect the current screen or application. Home key Touch it to open the home screen. If you’re viewing the left or right extended home screen, Press it to open the central home screen. Back key Touch it to open the previous screen you were working in. If the onscreen keyboard is open, touch it to close the keyboard. Power key Press it to turn on/off the display. Long press it to open a menu with options for Airplane mode, for Silent mode, for Vibration mode, and for powering off and for rebooting the phone. Volume keys Adjust the volume. Long press it to quickly adjust the ring tone volume to maximum or minimum. - 7 - Onscreen icons Icons Descriptions Icons Descriptions Signal strength Full battery Charging Missed calls You have an unread message. Music playing New calendar reminder Airplane mode Connected to a PC Alarm clock on Vibration mode Silen t mode Wi-Fi function on Bluetooth function is on Power on/off Powering on Long press the Power key until the power-on animation appears. Powering off Long press the Power key to display the phone options and select Power off. - 8 - Basic Operation Screen control You can control your phone through a series of operations on the screen.  Touch: you can touch the items on the screen to select them, to open the applications, or using the keyboard to input characters.  Swipe or slide: Quickly move your finger across the surface of the screen, without pausing when you first touch (so you don't drag something instead).  Touch & hold: you can touch & hold some items to get the item’s available menu.  Drag: you can drag some items on the screen to realize some operations.  Switch between landscape mode and portrait mode: you can switch to the landscape mode by rotating your phone. The landscape mode is only valid under some interfaces, such as text input interface, message viewing interface, etc.  Pinch: In some apps (such as Maps, Browser, and Gallery), you can zoom in and out by placing two fingers on the screen at once and pinching them together (to zoom out) or spreading them apart (to zoom in). - 9 - Home screen Switch to a recently used application On the home screen, touch & hold the Home key, opens a list of thumbnail images of apps you've worked with recently. To open an app, touch it. To remove a thumbnail from the list, swipe it left or right. Manage notifications • Open notifications panel: When a new notification appears on the notification bar, you can drag the notification bar down from the top of the screen to open notifications panel. • Respond to a notification: Touch it. • Dismiss a notification: Swipe it sideways. • Close notifications panel: Drag the tab at the bottom of the notification panel to the top of the screen. Notification bar Drag the notification bar down from the top of the screen to open the notifications panel. Status bar Shows the signal strength, battery status, etc. Favorites tray - 10 - Favorites tray The app icons you keep in the favorites tray remain visible on every Home screen. Touch, hold, & slide to move one of the Favorites icons out of the tray. Then use the same technique to move another one into the same position. Display area The home screen can be extended to exceed the screen’s width in order to provide more space for newly added shortcuts, widgets, etc. On the home screen, slide your finger on the screen to extend to the left or right. Use folders You can combine several app icons in a folder. Drop one app icon over another on a Home screen, and the two icons will be combined. From any Home screen, you can - Open a folder: Touch it. The folder opens. - Rename a folder: Touch its name. - Move icons around your Home screens: Touch, hold, and drag . Delete icons on the home screen To remove an application or widget, pres…

Text truncated - open the document above for the full version.

ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park, Nanshan District, Shenzhen, Guangdong, P.R.China Tel: +86 -755-86360379 ; Fax: +86 -755-86360298 Date: NOV. 4, 2014 Power of Attorney To whom it may concern, Please be notified that I, Zhang Min, have designated Ivy.Zhu in Shenzhen Morlab Communications Technology Co., Ltd. and David Gong in ZTE CORPORATION as the persons being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Ivy Zhu in Shenzhen Morlab Communications Technology Co., Ltd., and David Gong in ZTE CORPORATION on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). This authorization is limited to the product of as following: FCC ID: SRQ-C330 If you ha ve a ny acknowledgement a nd response, pl ease s end i t t o Shenzhen Mo rlab Communications Technology Co., Ltd. directly. Should you have an y questions or comments regarding this matter, please have my best attention. Sincerely yours, Contact Person: Min Zhang Company: ZTE CORPORATION TEL: +86 -21-68897541 FAX: +86 -21-68891070 E- mail: [email protected]

ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park, Nanshan District, Shenzhen, Guangdong, P.R.China Tel: +86-755-86360379 ; Fax: +86-755-86360298 2014/11/ 12 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: SRQ-C330 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Schematics Block Diagram Parts List Operation Description Tune Up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Yours Sincerely, Zha ng Min ZTE product approval manager

External Photos 1. EUT front view 2. EUT rear view 3. EUT left side view 4. EUT right side view 5. EUT top view 6. EUT bottom view 7. Accessories

FCC label and label location 1. Label 2. Label location

Internal Photos 1. EUT uncover view 2. Mainboard front view 3. Mainboard rear view 4. GSM/WCDMA chip view 5. CPU chip view 6. BT/WIFI chip view 7. GSM/WCDMA antenna view 8. BT/WIFI antenna view 9. GPS antenna view

MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. ChinaHttp://www.morlab.com E-mail: [email protected] Page 2 0f 160 SZ14100117S01 DIRECTORY TEST REPORT DECLARATION ······················································································· 4 1.TECHNICAL INFORMATION ························································································· 5 1.1 IDENTIFICATION OF APPLICANT ······················································································· 5 1.2 IDENTIFICATION OF MANUFACTURER ················································································ 5 1.3 EQUIPMENT UNDER TEST (EUT) ····················································································· 5 1.3.1 PHOTOGRAPHS OF THE EUT ······················································································· 6 1.3.2 IDENTIFICATION OF ALL USED EUT ················································································· 6 1.4 APPLIED REFERENCE DOCUMENTS ·················································································· 6 1.5 DEVICE CATEGORY AND SAR LIMITS ··············································································· 6 2. SPECIFIC ABSORPTION RATE (SAR) ··········································································· 7 2.1 INTRODUCTION ··········································································································· 7 2.2 SAR DEFINITION ········································································································ 7 3. SAR MEASUREMENT SETUP ······················································································ 8 3.1 THE MEASUREMENT SYSTEM ························································································· 8 3.2 PROBE ····················································································································· 8 3.3 PROBE CALIBRATION PROCESS ····················································································· 10 3.3.1 DOSIMETRIC ASSESSMENT PROCEDURE ········································································ 10 3.3.2 FREE SPACE ASSESSMENT PROCEDURE ········································································ 10 3.3.3 TEMPERATURE ASSESSMENT PROCEDURE ····································································· 10 3.4 PHANTOM ················································································································ 11 3.5 DEVICE HOLDER ········································································································ 11 4. TISSUE SIMULATING LIQUIDS ··················································································· 12 5. UNCERTAINTY ASSESSMENT ···················································································· 14 5.1 UNCERTAINTY EVALUATION FOR EUT SAR TEST ······················································· 14 5.2 UNCERTAINTY FOR SYSTEM PERFORMANCE CHECK ················································ 15 MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. ChinaHttp://www.morlab.com E-mail: [email protected] Page 3 0f 160 SZ14100117S01 6. SAR MEASUREMENT EVALUATION ············································································ 17 6.1 SYSTEM SETUP ········································································································· 17 6.2 VALIDATION RESULTS ································································································· 18 7. OPERATIONAL CONDITIONS DURING TEST ································································ 19 7.1 INFORMATION ON THE TESTING ······················································································ 19 7.2 BODY-WORN CONFIGURATIONS ····················································································· 20 7.3 MEASUREMENT PROCEDURE ························································································· 20 7.4 DESCRIPTION OF INTERPOLATION/EXTRAPOLATION SCHEME ·················································· 21 8. HOTSPOT MODE EVALUATION PROCEDURE ······························································ 22 9. MEASUREMENT OF CONDUCTED OUTPUT POWER ···················································· 23 10. TEST RESULTS LIST ······························································································· 27 11. REPEATED SAR MEASUREMENT ············································································· 32 12. MULTIPLE TRANSMITTERS EVALUATION ································································· 33 ANNEX A GRAPH TEST RESULTS ················································································· 36 ANNEX B GENERAL INFORMATION ············································································· 159 Change History Issue Date Reason for change 1.0 2014-11-11 First edition MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. ChinaHttp://www.morlab.com E-mail: [email protected] Page 5 0f 160 SZ14100117S01 1.TECHNICAL INFORMATION Note: the Following data is based on the information by the applicant. 1.1 Identification of Applicant Company Name: ZTE Corporation Address: ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park, Nanshan District, Shenzhen, Guangdong, P.R.China 1.2 Identification of Manufacturer Company Name: ZTE Corporation Address: ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park, Nanshan District, Shenzhen, Guangdong, P.R.China 1.3 Equipment Under Test (EUT) Model Name: ZTE Blade C330 Trade…

Text truncated - open the document above for the full version.

REPORT No.: SZ14100117W01 MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. ChinaHttp://www.morlab.com E-mail: [email protected] Page 2 0f 156 TABLE OF CONTENTS 1. GENERAL INFORMATION ...................................................................................................................... 4 1.1 EUT DESCRIPTION .................................................................................................................................... 4 1.2 TEST STANDARDS AND RESULTS .............................................................................................................. 6 1.3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 7 2. 47 CFR PART 2, PART 22H & 24E REQUIREMENTS .......................................................................... 8 2.1 CONDUCTED RF OUTPUT POWER ............................................................................................................. 8 2.2 PEAK TO AVERAGE RADIO ....................................................................................................................... 20 2.3 99% OCCUPIED BANDWIDTH ................................................................................................................... 26 2.4 FREQUENCY STABILITY ............................................................................................................................ 49 2.5 CONDUCTED OUT OF BAND EMISSIONS ................................................................................................... 56 2.6 BAND EDGE ............................................................................................................................................. 94 2.7 TRANSMITTER RADIATED POWER (EIRP/ERP) ..................................................................................... 107 2.8 RADIATED OUT OF BAND EMISSIONS ..................................................................................................... 118 Change History Issue Date Reason for change 1.0 Nov 11, 2014 First edition REPORT No.: SZ14100117W01 MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. ChinaHttp://www.morlab.com E-mail: [email protected] Page 4 0f 156 1. GENERAL INFORMATION 1.1 EUT Description Frequency Range ................ : GSM 850MHz: Tx: 824.20 - 848.80MHz (at intervals of 200kHz); Rx: 869.20 - 893.80MHz (at intervals of 200kHz) GSM 1900MHz: Tx: 1850.20 - 1909.80MHz (at intervals of 200kHz); Rx: 1930.20 - 1989.80MHz (at intervals of 200kHz) WCDMA 850MHz Tx: 826.4 - 846.6MHz (at intervals of 200kHz); Rx: 871.4 - 891.6MHz (at intervals of 200kHz) WCDMA 1900MHz Tx: 1852.4 - 1907.6MHz (at intervals of 200kHz); Rx: 1932.4 - 1987.6MHz (at intervals of 200kHz) Modulation Type ................... : GSM,GPRS Mode with GMSK Modulation EDGE Mode with 8PSK Modulation WCDMA Mode with QPSK Modulation HSDPA Mode with QPSK Modulation HSUPA Mode with QPSK Modulation HSPA+ Mode with QPSK Modulation Multislot Class ...................... : GPRS: Multislot Class 12,EGPRS: Multislot Class 12 Antenna Type ....................... : PIFA Antenna Emission Designators .......... : GSM 850:253KGXW,GSM 1900:250KGXW EGPRS850:250KG7W, EGPRS1900:249KG7W, WCDMA 850:4M18F9W ,WCDMA1900:4M17F9W Note 1: The transmitter (Tx) frequency arrangement of the Cellular 850MHz band used by the EUT can be represented with the formula F(n)=824.2+0.2*(n-128), 128<=n<=251; the lowest, middle, highest channel numbers (ARFCHs) used and tested in this report are separately 128 (824.2MHz), 190 (836.6MHz) and 251 (848.8MHz). Note 2: The transmitter (Tx) frequency arrangement of the PCS 1900MHz band used by the EUT can be represented with the formula F(n)=1850.2+0.2*(n-512), 512<=n<=810; the lowest, middle and highest channel numbers (ARFCHs) used and tested in this report are separately 512 (1850.2MHz), 661 (1880.0MHz) and 810 (1909.8MHz). Note 3: The transmitter (Tx) frequency arrangement of the WCDMA 850MHz band used by the EUT can be represented with the formula F(n)=826.4+0.2*(n-4132), 4132<=n<=4233; the lowest, middle and highest channel numbers (ARFCHs) used and tested in this report are separately 4132 (826.4MHz), 4175(835MHz) and 4233 (846.6MHz). Note 4: The transmitter (Tx) frequency arrangement of the WCDMA 1900MHz band used by the EUT can REPORT No.: SZ14100117W01 MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. ChinaHttp://www.morlab.com E-mail: [email protected] Page 5 0f 156 be represented with the formula F(n)=1852.4+0.2*(n-9262), 9262<=n<=9538; the lowest, middle and highest channel numbers (ARFCHs) used and tested in this report are separately 9262 (1852.4MHz), 9400 (1880MHz) and 9538 (1907.6MHz). Note 5: For a more detailed description, please refer to Specification or User’s Manual supplied by the applicant and/or manufacturer. REPORT No.: SZ14100117W01 MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. ChinaHttp://www.morlab.com E-mail: [email protected] Page 6 0f 156 1.2 Test Standards and Results The objective of the report is to perform testing according to 47 CFR Part 2, Part 22 and Part 24 for the EUT FCC ID Certification: No. Identity Document Title 1 47 CFR Part 2 (10-1-13 Edition) Frequency Allocations and Radio Treaty Matters; General Rules and Regulations 2 47 CFR Part 22 (10-1-13 Edition) Public Mobile Services 3 47 CFR Part 24 (10-1-13 Edition) Personal Communications Services Test detailed items/section required by FCC rules and results…

Text truncated - open the document above for the full version.

REPORT No.: SZ14100117W01 MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. ChinaHttp://www.morlab.com E-mail: [email protected] Page 49 0f 156 2.4 Frequency Stability 2.4.1 Requirement According to FCC section 22.355 and FCC section 24.235, the frequency stability shall be sufficient to ensure that the fundamental emission stays within the authorized frequency block. According to FCC section 2.1055, the test conditions are: (a) The temperature is varied from -30°C to +50°C at intervals of not more than 10°C. (b) For hand carried battery powered equipment, the primary supply voltage is reduced to the battery operating end point which shall be specified by the manufacture. The supply voltage shall be measured at the input to the cable normally provided with the equipment, or at the power supply terminals if cables are not normally provided. 2.4.2 Test Description 1. Test Setup: The EUT, which is powered by the DC Power Supply directly, is located in the Temperature Chamber. The EUT is commanded by the System Simulator (SS) to operate at the maximum output power i.e. Power Control Level (PCL) = 5 and Power Class = 4. A call is established between the EUT and the SS via a Common Antenna. 2. Equipments List: Description Manufacturer Model Serial No. Cal. Date Cal. Due System Simulator Agilent E5515C GB431301312014.02.26 2015.02.25 DC Power Supply Good Will GPS-3030DD EF920938 2014.02.26 2015.02.25 Temperature Chamber YinHe Experimental Equip. HL4003T (n.a.) 2014.02.26 2015.02.25 2.4.3 Test Verdict The nominal, highest and lowest extreme voltages are separately 3.8VDC, 4.2VDC and 3.45VDC, which are specified by the applicant; the normal temperature here used is 25°C. The frequency deviation limit of EUT Common Antenna System Simulator DC Power Supply Temperature Chamber REPORT No.: SZ14100117W01 MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. ChinaHttp://www.morlab.com E-mail: [email protected] Page 50 0f 156 850MHz band is ±2.5ppm, and 1900MHz is ±1ppm. 1. GSM 850MHz Band Test Conditions Frequency Deviation Verdict Power (VDC) Temperature (°C) Channel = 128 (824.2MHz) Channel = 190 (836.6MHz) Channel = 251 (848.8MHz) Hz Limits Hz Limits Hz Limits 3.8 -30 -24.45 ±2060.5 22.12 ±2091.5 18.17 ±2122 PASS -20 27.11 12.43 -15.02 -10 -2.25 -17.4615.11 0 30.26 31.145.05 +10 21.79 -24.933.02 +20 -19.56 -17.1910.76 +30 34.36 19.36 -16.53 +40 41.63 19.64 -2.13 +55 36.28 23.27 -12.89 4.2 +25 -15.73 29.05 -7.55 3.45 +25 -17.65 37.13 7.78 2. GSM 1900MHz Band Test Conditions Frequency Deviation Verdict Power (VDC) Temperatur e (°C) Channel = 512 (1850.2MHz) Channel = 661 (1880.0MHz) Channel = 810 (1909.8MHz) Hz Limits Hz Limits Hz Limits 3.8 -30 16.11 ±1850.2 24.18 ±1880.0 33.15 ±1909.8 PASS -20 37.18 -21.48 -18.88 -10 -2.05 -13.76 -16.88 0 40.06 -18.38 19.32 +10 1.98 -21.61 25.31 +20 -19.76 15.52 30.26 +30 39.76 -0.78 -29.21 +40 46.56 35.37 19.33 +55 39.88 24.02 -19.37 4.2 +25 37.88 23.72 27.09 3.45 +25 -5.69 15.22 19.89 REPORT No.: SZ14100117W01 MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. ChinaHttp://www.morlab.com E-mail: [email protected] Page 51 0f 156 3. EDGE 850MHz Band Test Conditions Frequency Deviation Verdict Power (VDC) Temperature (°C) Channel = 128 (824.2MHz) Channel = 190 (836.6MHz) Channel = 251 (848.8MHz) Hz Limits Hz Limits Hz Limits 3.8 -30 -31.12 ±2060.5 26.19 ±2091.5 6.22 ±2122 PASS -20 36.98 13.73 -13.80 -10 -3.25 -18.35 11.16 0 43.06 38.10 5.05 +10 1.99 -22.06 3.02 +20 -19.86 -16.11 10.76 +30 39.56 17.76 -16.51 +40 47.62 15.54 -2.11 +55 39.98 3.57 -12.89 4.2 +25 -15.71 14.05 -7.83 3.45 +25 -15.01 7.93 6.88 4. EDGE 1900MHz Band Test Conditions Frequency Deviation Verdict Power (VDC) Temperatur e (°C) Channel = 512 (1850.2MHz) Channel = 661 (1880.0MHz) Channel = 810 (1909.8MHz) Hz Limits Hz Limits Hz Limits 3.8 -30 -11.87 ±1850.2 25.12 ±1880.0 1.57 ±1909.8 PASS -20 2.72 7.63 -13.76 -10 1.25 -25.78 -13.21 0 2.57 -1.36 13.23 +10 -10.78 -17.98 5.23 +20 -2.11 -21.61 37.16 +30 14.03 14.58 -26.88 +40 5.43 -0.78 19.34 +55 -2.46 39.07 -16.77 4.2 +25 19.02 4.08 26.59 3.45 +25 -7.19 14.1319.03 REPORT No.: SZ14100117W01 MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. ChinaHttp://www.morlab.com E-mail: [email protected] Page 52 0f 156 5. WCDMA 850MHz Band Test Conditions Frequency Deviation Verdict Power (VDC) Temperatur e (°C) Channel = 4123 (826.4MHz) Channel = 4175 (835MHz) Channel = 4233 (846.6MHz) Hz Limit Hz Limit Hz Limit 3.8 -30 18.11 ±2066 14.21 ±2087.5 -1.10 ±2116.5 PASS -20 -7.51 -0.62 -18.48 -10 -3.43 22.45 7.67 0 16.47 13.25 4.32 +10 30.18 1.31 -17.33 +20 32.07 -12.2211.90 +30 -7.98 30.62 6.63 +40 26.31 13.45 28.93 +55 12.10 -12.4219.76 4.2 +25 -6.17 32.12 23.89 3.45 +25 18.56 -17.80-18.12 6. WCDMA 1900MHz Band Test Conditions Frequency Deviation Verdict Power (VDC) Temperature (°C) Channel = 9262 (1852.4MHz) Channel = 9400 (1880.0MHz) Channel = 9538 (1907.6MHz) Hz Limits Hz Limits Hz Limits 3.8 -30 -4.12 ±1852.4 -11.67 ±1880.0 -1.29 ±1907.6 PASS -20 19.15 12.28 25.60 -10 5.35 -14.36 15.11 0 18.92 18.59 -3.17 +10 32.40 21.39 18.12 +20 13.55 38.27 -10.39 +30 2.31 2.37 17.47 +40 -12.52 -13.47 28.84 +55 -13.65 -5.81 -2.53 4.2 +25 24.23 14.68 21.05 3.45 +25 23.12 25.37 -25.11 REPORT No.: SZ14100117W01 MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. ChinaHttp://www.morlab.com E-mail: [email protected] Page 53 0f 156 7. HSDPA 850MHz Band Test Cond…

Text truncated - open the document above for the full version.

MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. ChinaHttp://www.morlab.com E-mail: [email protected] Page 2 0f 6 SZ14100117S01 1. EUT Right Head Touch Cheek Position 2. EUT Right Head Tilt15 Position MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. ChinaHttp://www.morlab.com E-mail: [email protected] Page 3 0f 6 SZ14100117S01 3 EUT Left Head Touch Cheek Position 4 EUT Left Head Tilt15 Position MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. ChinaHttp://www.morlab.com E-mail: [email protected] Page 4 0f 6 SZ14100117S01 5 Back Side Position 6 Front Side Position 10mm 10mm MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. ChinaHttp://www.morlab.com E-mail: [email protected] Page 5 0f 6 SZ14100117S01 7. Edge A 8. Edge B 10mm 10mm MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. ChinaHttp://www.morlab.com E-mail: [email protected] Page 6 0f 6 SZ14100117S01 9. Edge C 10. Edge D 10mm 10mm MORLAB GROUP FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. ChinaHttp://www.morlab.com E-mail: [email protected] Page 7 0f 6 SZ14100117S01 Liquid Level Photo Head Liquid Liquid depth: 15.1cm Liquid Level Photo Body Liquid Liquid depth :15.5cm

Test Setup Photos 1. Conducted Spurious Emission 2. Radiated Spurious Emission