SRQ-K95LMobile Broadband Internet Device with WCDMA, LTE, Bluetooth and WiFi

1 Quick Start Guide 2 LEGAL INFORMATION Copyright © 2021 ZT E CORPORATION. All rights reserved. No part of this publication may be quoted, reproduced, translat ed or used in any form or by any means, electronic or mechanical, inc luding photocopying and microfilm, without the prior written permissio n of ZTE Corporation. Notice ZTE Corporation reserves the right to make modifications on pri nt errors or update specifications in this guide without prior notice. We offer self-service for our smart terminal device users. Plea se visit the ZTE official website (at www.ztedevices.com ) for more information on user manual, self-service and supported product models. Informa tion on the website takes precedence. Disclaimer ZTE Corporation expressly disclaims any liability for faults an d damages caused by unauthorized modifications of the software. Images and screenshots used in this guide may differ from the a ctual product. Content in this guide may differ from the actual produ ct or software. Trademarks ZTE and the ZTE logos are trademarks of ZTE Corporation. Android™ is a trademark of Google LLC. The Bluetooth ® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by ZTE Corporation is under license. microSDXC logo is a trademark of SD-3C, LLC. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together, DTS:X, the DTS:X logo, and DTS:X Ultra are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved. Other trademarks and trade names are the property of their resp ective owners. Version No. : R1.0 Edition Time : June 15, 2021 3 Getting to Know Your Tablet Li g ht senso r Indicator light Touch screen Front camera Power key Volume key Microphone Speake r Flash USB Type-C j ac k nano-SIM/ microSDXC card tray Bac k camera Speake r 4 Setting Up Your Tablet Before exploring all the great features of your tablet, set it up by installing the nano-SIM card and an optional microSDXC card (so ld separately). WARNING! To avoid damage to the device, do not use any other kind of SIM cards, or any non-standard nano-SI M card cut from a SIM card. Y ou can get a standard nano-SIM car d from your service provider. 1. Insert the tip of the tray eje ct tool into the hole on the c ard tray. CAUTION: Never replace the included tray e ject tool with sharp objects. Ensure that the tray eject tool is perpendicular to the hole. Otherwise, the phone may be damaged. 2. Pull out the card tray and place a nano-SIM card and a micro SDXC card (optional) into the card slots, as shown. Note the notch a nd the shape of the cards and the card slots. Carefully slide the tray back into place. NOTE: Both the nano-SIM card and the microSDXC card can be installed or removed while the device is turned on. You need to unmount the microSDXC card before removing it. See the User Manual for details. 5 Charging the Battery Your new tablet’s battery should have enough power for the devi ce to turn on and find a signal. Y ou should fully charge the batte ry as soon as possible. WARNING! Use only ZTE-approved chargers and USB cables. The use of unapproved accessories could dam age your device or cause the battery to explode. WARNING! Do not remove the back cover. The battery is not removable. Removal may cause fire or explosion. 1. Connect the adapter to the charging jack. 2. Connect the charger to a standard AC power outlet. 3. Disconnect the charger when th e battery is fully charged. NOTE: If the battery is extremely low, you may be unable to power on the tablet even when it is being c harged. In this case, try again a fter charging for at least 20 minutes . Contact customer service if y ou still cannot power on the tablet after prolonged charging. Powering On/Off  Press and hold the Power key to turn on your tablet.  To turn it off, press and hold the Power key to open the options menu and touch > . NOTE: If the device freezes or takes too long to respond, try pressin g and holding the Power key for about 10 seconds to restart the device. 6 Waking Up Your Tablet Your tablet automatically goes into sleep mode when it is not i n use for some time. The display is turned off to save power and the keys are locked to prevent accidental operations. You can wake up your tablet by turning on the display and unloc king the keys. 1. Press the Power key to turn the screen on. 2. Swipe up on the screen. NOTE: If you have set an unlock pattern, a PIN or a password for your tablet, you’ll need to draw the pattern, or enter the PIN/passw ord to unlock the screen. Product Safety Information Don’t use at gas stations. Don’t make or receive phone calls while driving. Never text while driving. Your tablet may produce a bright or flashing light. Don’t dispose of your tablet in fire. Small parts may cause choking. Avoid contact with anything magnetic. Your tablet can produce a loud sound. To prevent possible hearing damage, do not listen at high volume levels for long periods. Avoid extreme temperatures. Keep away from pacemakers and other electronic medical devices. Avoid contact with liquids. Keep your tablet dry. 7 Turn off when asked to in hospitals and medical facilities. Do not attempt to disassemble your tablet. Turn off when told to on aircraft and at airports. Don’t rely on your tablet as a primary device for emergency communications. Turn off when near explosive materials or liquids. Only use approved accessories. FCC RF Exposure Information (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States and Industry Canada of Canada. The exposure standard for wireless devices employing a unit of measurement is known as the Spec ific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg and 1.6 W/kg by I…

Text truncated - open the document above for the full version.

ZTECorporation. ZTE Plaza, Keji Road South,Hi-Tech, Industrial Park, Nanshan District,Shenzhen, P.R.China Tel: +86-21-68895397 Authorization Letter FCC ID: SRQ‐K95L Date: July 14 2021 To whom it may concern: We, the undersigned, hereby authorize The State Radio_monitoring_centerTesting Center (SRTC) to act on our behalf, as our agent, in the following matters related to the FCC approval of our product: Product Name: Mobile Broadband Internet Device Product Model: K95L FCC ID: SRQ‐K95L Report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by The State Radio_monitoring_center TestingCenter (SRTC) within the scope of this authorization shall have the same effects as our own. This authorization shall expire 2 months from original date. If you have any question regarding the authorization, please don’t hesitate to contact with me. Thank you. Sincerely, Certification Manager: Gong Yu ZTECorporation. Address: ZTE Plaza, Keji Road South,Hi-Tech, Industrial Park, Nanshan District,Shenzhen, P.R.China Tel: +86-21-68895397

ZTE Corporation Address: ZTE Plaza, Keji Road South,Hi-Tech, Industrial Park, Nanshan District,Shenzhen, P.R.China Tel: +86-21-68895397 PHOENIX TESTLAB GmbH Date: 15 July 2021 Product Certification Königswinkel 10 D 32825 Blomberg Subject: Declaration Operating Channel Limitation Product Name: Mobile Broadband Internet Device Product Model: K95L FCC ID: SRQ-K95L To Whom it may concern, The operating channels in 802.11 b/g/n mode for the device marketed to the US/Canada are firmware limited to channel 1 ~ 11 (2412 ~ 2462 MHz). The end-user has no possibility to select any other operating channels. If you have any questions, please feel free to contact me. Thank you. Sincerely, Certification Manager : Gong Yu ZTE Corporation Address: ZTE Plaza, Keji Road South,Hi-Tech, Industrial Park, Nanshan District,Shenzhen, P.R.China Tel: +86-21-68895397

ZTECorporation. Address: ZTE Plaza, Keji Road South,Hi-Tech, Industrial Park, Nanshan District,Shenzhen, P.R.China Tel: +86-21-68895397 Request of Confidentiality Federal Communications Commission Authorization and Evaluation Division Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying of following product: Product Name: Mobile Broadband Internet Device Product Model: K95L FCC ID: SRQ-K95L The following information should be held confidential: All Schematics/block diagrams All Parts list for the above schematic diagram Tune-Up Procedure Operational description and technical overview of product The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. July 14, 2021 ZTECorporation. Address: ZTE Plaza, Keji Road South,Hi-Tech, Industrial Park, Nanshan District,Shenzhen, P.R.China Tel: +86-21-68895397

Ersteller: D. Brandhorst Revision: 00 Erstelldatum: 20.06.2011 Datum: 00.00.00 Seite 1 von 1 UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: SRQ-K95L (1) DFS Device -- Master, Client with Radar detection capability , Client without radar detection capability, N/A (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes ) Ad Hoc Mode capability Access point capability 2412 – 2462 MHz Yes, No Yes, No Yes, No Yes, No 2422 – 2452 MHz Yes, No Yes, No Yes, No Yes, No 5745 – 5825 MHz Yes, No Yes, No Yes, No Yes, No 5755 – 5795 MHz Yes, No Yes, No Yes, No Yes, No 5180 – 5240 MHz Yes, No Yes, No Yes, No Yes, No 5190 – 5230 MHz Yes, No Yes, No Yes, No Yes, No 5260 – 5320 MHz Yes, No Yes, No Yes, No Yes, No 5270 – 5310 MHz Yes, No Yes, No Yes, No Yes, No 5500 – 5700 MHz Yes, No Yes, No Yes, No Yes, No 5510 – 5670 MHz Yes, No Yes, No Yes, No Yes, No (3) Country code selection ability - Yes , No If no, pls explain how was implemented : use Microsoft network utility (4) Meet 15.202 requirement - Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply , (If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) Applicant: ZTE Corporation Address: ZTE Plaza, #55 Keji Road South, Hi-Tech, Industrial Park, Nanshan District,Guangdong Signature: July 14，2021 Name:Gong Yu Job Title: Certification Manager

External Photo FCC ID：SRQ-K95L IC Number：5200E-K95L 1 / 8 External Photo FCC ID：SRQ-K95L IC Number：5200E-K95L 2 / 8 Charger view(CHENYANG) External Photo FCC ID：SRQ-K95L IC Number：5200E-K95L 3 / 8 Charger view(CHENYANG) Charger view(CHENYANG) Charger view(CHENYANG) External Photo FCC ID：SRQ-K95L IC Number：5200E-K95L 4 / 8 Charger view(RUIJING) Charger view(RUIJING) Charger view(RUIJING)

External Photo FCC ID：SRQ-K95L IC Number：5200E-K95L 5 / 8 Charger view(RUIJING) USB cable view(King Power Electronics Co.,Ltd) External Photo FCC ID：SRQ-K95L IC Number：5200E-K95L 6 / 8 USB cable view(Luxshare‐ICT Co., Ltd) External Photo FCC ID：SRQ-K95L IC Number：5200E-K95L 7 / 8 Battery view(SCUD (FUJIAN) Electronics Co., Ltd.) External Photo FCC ID：SRQ-K95L IC Number：5200E-K95L 8 / 8 Battery view(SCUD (FUJIAN) Electronics Co., Ltd.)

Made in China Fabriqué en Chine FCC ID:SRQ-K95L IC:5200E-K95L SKU:NLZTEZPAD10 H/W:K95LHW1.0 S/N: XXXXXXXXXXXX IMEI:XXXXXXXXXXXXXXX MODEL:K95L Size : 40 * 25 mm CAN ICES-3(B)/NMB-3(B)

This device is only compatible with your service provider’s network. Cet appareil est uniquement compatible avec le réseau de votre fournisseur de services. FCC ID ：SRQ-K95L IC Number：5200E-K95L

Internal Photo FCC ID：SRQ-K95L IC Number：5200E-K95L 1 / 11 Internal Photo FCC ID：SRQ-K95L IC Number：5200E-K95L 2 / 11

Internal Photo FCC ID：SRQ-K95L IC Number：5200E-K95L 5 / 11 Internal Photo FCC ID：SRQ-K95L IC Number：5200E-K95L 6 / 11

Internal Photo FCC ID：SRQ-K95L IC Number：5200E-K95L 7 / 11 Internal Photo FCC ID：SRQ-K95L IC Number：5200E-K95L 8 / 11 Internal Photo FCC ID：SRQ-K95L IC Number：5200E-K95L 9 / 11 Internal Photo FCC ID：SRQ-K95L IC Number：5200E-K95L 10 / 11 Internal Photo FCC ID：SRQ-K95L IC Number：5200E-K95L 11 / 11

No.:SRTC2021-9004(F)-21061503(H) FCC ID: SRQ-K95L The State Radio_monitoring_center Testing Center (SRTC) Page number: 1 of 39 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 ANNEX A – TEST PLOTS System check 750MHz Communication System: UID 0, CW (0) Frequency: 750 MHz; Duty cycle:1:1 Medium parameters used: f = 750 MHz; σ = 0.86 S/m; ε r = 41.47; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration:  Probe: EX3DV4 - SN3708; ConvF(9.75, 9.75, 9.75); Calibrated: 2020/10/30  Sensor-Surface: 1.4mm (Mechanical Surface Detection),  Electronics: DAE4 Sn720; Calibrated: 9/30/2020  Phantom: Twin-SAM 1559; Type: QD 000 P40 CD; Serial: 1559  Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) System Performance Check at Frequencies 750MHz/d=15mm, Pin=250 mW, dist=3.0mm (ES-Probe)/Area Scan (8x15x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.16 W/kg System Performance Check at Frequencies 750MHz/d=15mm, Pin=250 mW, dist=3.0mm (ES-Probe)/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 41.00 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 3.23 W/kg SAR(1 g) = 2.11 W/kg; SAR(10 g) = 1.40 W/kg Maximum value of SAR (measured) = 2.48 W/kg SRTC performed system check by using 250mw at antenna port No.:SRTC2021-9004(F)-21061503(H) FCC ID: SRQ-K95L The State Radio_monitoring_center Testing Center (SRTC) Page number: 2 of 39 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 System check 835MHz Communication System: UID 0, CW (0); Frequency: 835 MHz Duty cycle:1:1 Medium parameters used (interpolated): f = 835 MHz; σ = 0.89 S/m; ε r = 41.42; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN3708; ConvF(9.39, 9.39, 9.39); Calibrated: 2020/10/30  Sensor-Surface: 1.4mm (Mechanical Surface Detection),  Electronics: DAE4 Sn720; Calibrated: 9/30/2020  Phantom: Twin-SAM 1559; Type: QD 000 P40 CD; Serial: 1559  Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Configuration 835/835/Area Scan (8x15x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.72 W/kg Configuration 835/835/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 51.67 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 3.56 W/kg SAR(1 g) = 2.33 W/kg; SAR(10 g) = 1.61 W/kg Maximum value of SAR (measured) = 2.76 W/kg SRTC performed system check by using 250mw at antenna port No.:SRTC2021-9004(F)-21061503(H) FCC ID: SRQ-K95L The State Radio_monitoring_center Testing Center (SRTC) Page number: 3 of 39 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 System check 1800MHz Communication System: UID 0, CW (0); Frequency: 1800 MHz; Duty cycle:1:1 Medium parameters used: f = 1800 MHz; σ = 1.35 S/m; ε r = 39.83; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN3708; ConvF(8.27, 8.27, 8.27); Calibrated: 2020/10/30  Sensor-Surface: 1.4mm (Mechanical Surface Detection),  Electronics: DAE4 Sn720; Calibrated: 9/30/2020  Phantom: Twin-SAM 1559; Type: QD 000 P40 CD; Serial: 1559  Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Configuration 1800/1800/Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 8.31 W/kg Configuration 1800/1800/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 76.76 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 17.5 W/kg SAR(1 g) = 9.9 W/kg; SAR(10 g) = 4.95 W/kg Maximum value of SAR (measured) = 12.1 W/kg SRTC performed system check by using 250mw at antenna port No.:SRTC2021-9004(F)-21061503(H) FCC ID: SRQ-K95L The State Radio_monitoring_center Testing Center (SRTC) Page number: 4 of 39 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 System check 2000MHz Communication System: UID 0, CW (0); Frequency: 2000 MHz; Duty cycle:1:1 Medium parameters used: f = 2000 MHz; σ = 1.35 S/m; ε r = 39.82; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN3708; ConvF(7.94, 7.94, 7.94); Calibrated: 2020/10/30  Sensor-Surface: 1.4mm (Mechanical Surface Detection),  Electronics: DAE4 Sn720; Calibrated: 9/30/2020  Phantom: Twin-SAM 1559; Type: QD 000 P40 CD; Serial: 1559  Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Configuration 2000/2000/Area Scan (7x10x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 8.40 W/kg Configuration 2000/2000/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 76.22 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 18.7 W/kg SAR(1 g) = 10.55 W/kg; SAR(10 g) = 4.99 W/kg Maximum value of SAR (measured) = 12.9 W/kg SRTC performed system check by using 250mw at antenna port No.:SRTC2021-9004(F)-21061503(H) FCC ID: SRQ-K95L The State Radio_monitoring_center Testing Center (SRTC) Page number: 5 of 39 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 System check 2450MHz Communication System: UID 0, CW (0); Frequency: 2450 MHz; Duty cycle:1:1 Medium parameters used: f = 2450 MHz; σ = 1.75 S/m; ε r = 38.94; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN3708; ConvF(7.48, 7.48, 7.48); Calibrated: 2020/10/30  Sensor-Surface: 1.4mm (Mechanical Surface Detection),  Electronics: DAE4 Sn720; Calibrated: 9/30/2020  Phantom: Twin-SAM 1559; Type: QD 000 P40 CD; Serial: 1559  Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) System Performance Check at Frequencies 2450 MHz/2450/Area Scan (8x11x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 21.2 W/kg System Performance Check at Frequencies 2450 MHz/2450/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 108.3 V/m; Power Drift = 0.18 dB Peak SAR (extrapolated) = 28.2 W/kg SAR(1 g) = 13.59 W/kg; SAR(10 g) = 6.34 W/kg Maximum value of SAR (measured) = 22.…

Text truncated - open the document above for the full version.

Certificate Number: 5055.02 TEST REPORT FOR SAR TESTING Report No.: SRTC2021-9004(F)-21061503(H) Product Name: Mobile Broadband Internet Device Product Model: K95L Applicant: ZTE Corporation Manufacturer: ZTE Corporation Specification: Part 2.1093 IEEE Std 1528 KDB Procedures FCC ID: SRQ-K95L The State Radio_monitoring_center Testing Center (SRTC) 15th Building, No.30 Shixing Street, Shijingshan District, Beijing, P.R. China Tel: 86-10-57996183 Fax: 86-10-57996388 No.: SRTC2021-9004(F)-21061503(H) FCC ID: SRQ-K95L The State Radio_monitoring_center Testing Center (SRTC) Page number: 1 of 163 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 Contents 1. GENERAL INFORMATION .................................................................................................................... 2 1.1 NOTES OF THE TEST REPORT ................................................................................................................... 2 1.2 INFORMATION ABOUT THE TESTING LABORATORY ...................................................................................... 2 1.3 APPLICANT’S DETAILS ............................................................................................................................. 2 1.4 MANUFACTURER’S DETAILS ..................................................................................................................... 3 1.5 TEST ENVIRONMENT ............................................................................................................................... 3 2. DESCRIPTION OF THE DEVICE UNDER TEST ................................................................................... 4 2.1 FINAL EQUIPMENT BUILD STATUS ............................................................................................................ 4 2.2 SUPPORT EQUIPMENT ............................................................................................................................. 5 3. REFERENCE SPECIFICATION ............................................................................................................. 6 4. TEST CONDITIONS ............................................................................................................................... 7 4.1 PICTURE TO DEMONSTRATE THE REQUIRED LIQUID DEPTH ......................................................................... 7 4.2 TEST SIGNAL, FREQUENCIES AND OUTPUT POWER .................................................................................. 7 4.3 SAR MEASUREMENT SET-UP .................................................................................................................. 8 4.4 PHANTOMS ............................................................................................................................................. 8 4.5 TISSUE SIMULANTS ................................................................................................................................. 9 4.6 DESCRIPTION OF THE TEST PROCEDURE ...................................................................................... 9 5 RESULT SUMMARY ............................................................................................................................. 12 6 TEST RESULT ...................................................................................................................................... 13 6.1 CONDUCTED POWER AND TUNE-UP TOLERANCE .................................................................................... 13 6.2 STANDALONE SAR TEST EXCLUSION CONSIDERATIONS ......................................................................... 98 6.3 RF EXPOSURE CONDITIONS ................................................................................................................. 100 6.4 SYSTEM CHECKING............................................................................................................................. 102 6.5 SAR TEST RESULT ......................................................................................................................... 103 6.6 SAR MEASUREMENT VARIABILITY ....................................................................................................... 155 6.7 SIMULTANEOUS TRANSMISSION SAR ANALYSIS ................................................................................... 156 7 MEASUREMENT UNCERTAINTY ...................................................................................................... 158 8 TEST EQUIPMENTS .......................................................................................................................... 160 ANNEX A – TEST PLOTS ...................................................................................................................... 163 No.: SRTC2021-9004(F)-21061503(H) FCC ID: SRQ-K95L The State Radio_monitoring_center Testing Center (SRTC) Page number: 2 of 163 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 1. GENERAL INFORMATION 1.1 Notes of the test report The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written permission of The State Radio_monitoring_center Testing Center (SRTC). The test results relate only to individual items of the samples which have been tested. The certification and accreditation identifiers used in this report shall not be applicable to the tested or calibrated samples thereof. The manufacturer shall not mark the tested samples or items (or a separate part of the item) with the identifiers of certification and accreditation to mislead relevant parties about the tested samples or items. 1.2 Information about the testing laboratory Company: The State Radio_monitoring_center Testing Center (SRTC) Address: 15th Building, No.30 Shixing Street, Shijingshan District, Beijing P.R. China City: Beijing Country or Region: P.R. China Contacted person: Liu Jia Tel: +86 10 57996183 Fax: +86 10 57996388 Email: [email protected] 1.3 Applicant’s detai…

Text truncated - open the document above for the full version.

No.: SRTC2021-9004(F)-21061503(G) FCC ID: SRQ-K95L The State Radio_monitoring_center Testing Center (SRTC) Page number: 1 of 12 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 APPENDIX A – TEST DATA OF CONDUCTED EMISSION In order to find the worst case condition, Pre-tests are needed at the presence of different data rate. Data rate below means worst-case rate of each test item. Worst-case data rates are shown as following table. Test Mode Data Rate 802.11a 6Mbps 802.11n HT20 MCS0 802.11n HT40 MCS0 802.11ac VHT20 MCS0 802.11ac VHT40 MCS0 802.11ac VHT80 MCS0 We chose the Worst-modes are shown as following table: Test Mode Note 802.11a --- 802.11n HT20 Cover 802.11ac VHT20 802.11n HT40 Cover 802.11ac VHT40 802.11ac VHT80 --- Directional gain Band Ant Gain (dBi) Power Limit (dBm) PSD Limit 5.2&5.3&5.6GHz 1.1 24.0 11.0(dBm/MHz) 5.8GHz 1.1 30.0 30.0(dBm/500kHz) Duty Cycle Test Mode Frequency (MHz) Duty Cycle (%) Correction Factor(dB) 802.11a 5180 97.87% 0.09 802. 11n HT20 5180 97.74% 0.10 802. 11n HT40 5190 95.22% 0.21 802. 11ac VHT20 5180 97.64% 0.10 802. 11ac VHT40 5190 95.41% 0.20 802. 11ac VHT80 5210 90.40% 0.44 No.: SRTC2021-9004(F)-21061503(G) FCC ID: SRQ-K95L The State Radio_monitoring_center Testing Center (SRTC) Page number: 2 of 12 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 Output Power UNII-1 Mode Freq (MHz) Chain Conducted average power output(dBm) 802.11a 5180 Chain0 17.37 5220 Chain0 17.16 5240 Chain0 17.27 802.11n20M 5180 Chain0 16.11 5240 Chain0 16.18 802.11n40M 5190 Chain0 16.91 5230 Chain0 16.75 802.11ac20M 5180 Chain0 14.35 5220 Chain0 14.17 5240 Chain0 14.08 802.11ac40M 5190 Chain0 15.13 5230 Chain0 14.96 802.11ac80M 5210 Chain0 14.61 No.: SRTC2021-9004(F)-21061503(G) FCC ID: SRQ-K95L The State Radio_monitoring_center Testing Center (SRTC) Page number: 3 of 12 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 Emission Bandwidth Offset 11.5dB = Attenuator 10dB+ Temporary antenna connector loss 0.5dB+ Cable loss 1dB Test Mode:802.11a Carrier frequency (MHz) Chain 26dB Bandwidth (MHz) 5180 Chain0 22.21 5220 Chain0 24.77 5240 Chain0 24.86 Test Mode:802.11a Chain0 Test Mode:802.11a Chain0 Test Mode:802.11a Chain0 No.: SRTC2021-9004(F)-21061503(G) FCC ID: SRQ-K95L The State Radio_monitoring_center Testing Center (SRTC) Page number: 4 of 12 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 Test Mode:802. 11n HT20 Carrier frequency (MHz) Chain 26dB Bandwidth (MHz) 5180 Chain0 23.50 5240 Chain0 24.16 Test Mode:802. 11n HT20 Chain0 Test Mode:802. 11n HT20 Chain0 No.: SRTC2021-9004(F)-21061503(G) FCC ID: SRQ-K95L The State Radio_monitoring_center Testing Center (SRTC) Page number: 5 of 12 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 Test Mode:802. 11n HT40 Carrier frequency (MHz) Chain 26dB Bandwidth (MHz) 5190 Chain0 40.88 5230 Chain0 40.10 Test Mode:802. 11n HT40 Chain0 Test Mode:802. 11n HT40 Chain0 Test Mode:802. 11ac VHT80 Carrier frequency (MHz) Chain 26dB Bandwidth (MHz) 5210 Chain0 80.89 Test Mode:802. 11ac VHT80 Chain0 No.: SRTC2021-9004(F)-21061503(G) FCC ID: SRQ-K95L The State Radio_monitoring_center Testing Center (SRTC) Page number: 6 of 12 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 Occupied Bandwidth Offset 11.5dB = Attenuator 10dB+ Temporary antenna connector loss 0.5dB+ Cable loss 1dB Test Mode:802.11a Carrier frequency (MHz) Chain Occupied Bandwidth (MHz) 5180 Chain0 17.068 5220 Chain0 17.122 5240 Chain0 16.988 Test Mode:802.11a Chain0 Test Mode:802.11a Chain0 Test Mode:802.11a Chain0 No.: SRTC2021-9004(F)-21061503(G) FCC ID: SRQ-K95L The State Radio_monitoring_center Testing Center (SRTC) Page number: 7 of 12 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 Test Mode:802. 11n HT20 Carrier frequency (MHz) Chain Occupied Bandwidth (MHz) 5180 Chain0 18.144 5240 Chain0 18.090 Test Mode:802. 11n HT20 Chain0 Test Mode:802. 11n HT20 Chain0 No.: SRTC2021-9004(F)-21061503(G) FCC ID: SRQ-K95L The State Radio_monitoring_center Testing Center (SRTC) Page number: 8 of 12 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 Test Mode:802. 11n HT40 Carrier frequency (MHz) Chain Occupied Bandwidth (MHz) 5190 Chain0 36.415 5230 Chain0 36.485 Test Mode:802. 11n HT40 Chain0 Test Mode:802. 11n HT40 Chain0 Test Mode:802. 11ac VHT80 Carrier frequency (MHz) Chain Occupied Bandwidth (MHz) 5210 Chain0 75.606 Test Mode:802. 11ac VHT80 Chain0 No.: SRTC2021-9004(F)-21061503(G) FCC ID: SRQ-K95L The State Radio_monitoring_center Testing Center (SRTC) Page …

Text truncated - open the document above for the full version.