SRQ-MF266LTE Wireless Router (GSM/WCDMA/LTE)

1 MF266B Quick Start Guide 2 Scan this QR code to download the Install Helper application. 3 1. Prepare Installation Tools Prepare the following tools:  Crosshead screwdriver  Tape measure  Marker pens  Cutter knife  Cable ties  Hammer drill Installation Precautions  Do not install the device with the interface side facing upwards.  Do not install the device horizontally.  Do not install the device tilted. WARNING! ZTE is not liable for any problem caused by device falling due to incorrect installation, such as property damage, personal injury or death. WARNING! The device must be installed downwards and vertically. It is not recommended to install the device in other directions (including but not limited to the above scenarios). ZTE is not liable for any 4 problem caused by the installation in other incorrect directions.  Do not install the device at a high position (lightning area).  The device must be placed in a well-ventilated environment for use. If possible, install the device in a place with less direct sunlight, for example, in the shade. The device must not be installed at the outlet of the exhaust pipe, or installed in a place where water passes through, for example, a rain shed.  The device shall be installed in the position of the site survey design drawings and within the protection range of 45° of the lightning rod. In high mountains and areas with heavy lightning (the number of thunderstorm days per year exceeds 180), ensure that the device is within the protection range of 30°of the lightning rod.  When the device is mounted on the wall, it should better be more than 1 m away from the grounding cable of the lightning rod and more than 20 cm away from the lightning protection zone.  When installing the device against a pole, do not install a lightning rod on the pole. It is recommended that an independent lightning rod be installed near the pole. If a lightning rod is installed on the pole, it is recommended that the lightning rod be led out and grounded directly.  The mounting pole must be firm, cannot be shaken and 5 must meet the wind-resistant requirements (not less than level-10 wind speed).  The mounting pole should be vertical, and the vertical error should be less than ±2°. 6 Requirements  Installation space requirements 7  Installation medium requirements: Metallic pole.  A valid nano-SIM card 8 2. Insert the nano-SIM Card 1. Use the crosshead screwdriver to loosen the two screws and then remove the front cover. 9 2. Insert the nano-SIM card. WARNING! To avoid damage to the device, do not use any other kind of SIM cards, or any non-standard nano-SIM card cut from a SIM card. You can get a standard nano-SIM card from your service provider. 10 3. Locate the Installation Position 1. Use a network cable to connect the POE to your device. 2. Connect the POE to the power socket. 3. Check the SIGNAL indicator on your device to find the position. NOTES :  Three lights show the signal strength. More lights on means better signals.  You also can use the Install Helper Application to help you confirm the signal strength. 4. Locate the position with the best signal strength to install your device. 5. Disconnect the POE and the network cable. 11 4. Install the Device  Install the Device Against a Pole 1. Loosen the clamps. 2. Pass the clamps through the mounting hole and fasten the two clamps to the pole. 12  Install the Device on a Wall 1. Mark the positions for drilling holes on the wall. The distance between two holes is 58mm. 13 2. Use a 6mm percussion drill to drill hole at the marked positions and install two expansion bolts. 3. Hang the MF266B on the expansion bolts. 14 5. Connect a Network Cable 1. Pass a network cable through the waterproof rubber ring, connect to the network port and then wind this cable as shown. 2. Put the cover back and tighten the screws. 15 6. Connect the POE Adapter 1. Connect the network cable which is from the ODU (MF266B) to the PWR LAN-OUT port on the POE adapter. 2. Use a network cable to connect the LAN-IN port on the POE adapter to the IDU. 16 7. Check the Installation Device Installation:  The MF266B is installed firmly.  The network cable is installed firmly.  The nano-SIM card is installed.  The network ports of the POE adapter are connected correctly. Cables:  Verify that all cables are connected properly, cable connectors are secure.  Cables should be laid in a clear and straight manner without crossing each other. There is no obvious curve or slant. Cables do not hang in the air or cross each other. 17 8. Start the Device and Access the Internet Connect the power plug of the POE adapter to the power socket. Your ODU (MF266B) will be powered on and connect to the Internet automatically. And then the IDU which is connected to the POE can access the Internet. 18 9. Change Your Device Settings You can change the device settings by logging in to the configuration web page. 1. View the label in the packing box to get the default Device Manager Website IP address and WebUI password. 2. Launch the Internet browser. Enter the Device Manager Website IP address in the Address bar. 3. Input the WebUI password and then click Login. 4. After the configuration web page is opened, you can change the password or other settings. NOTES:  Please keep this label for future use.  The default username is admin and the default password can be found on the device label.  If you forget the changed WebUI password, you need to restore your device to the factory settings. Please click Reset on the login web page, enter the reset password written on the label and then click Apply. 19 Indicator Lights POWER Blue on: Power is on and POE power supply is working normally. Off: Power is off or POE power supply is working abnormally. LAN Blue on: The LAN port is connected. Off: No network cable is connected. NETWORK Red: The device is turned on but not registered to the mobile network. Blue solid: The device is connected to the 4G L…

Text truncated - open the document above for the full version.

ZTECorporation ZTEPlaza,#55KejiRoadSouth,Hi-Tech,IndustrialPark,NanshanDistrict,Guangdong RequestofConfidentiality FederalCommunicationsCommissionAuthorizationandEvaluationDivision PursuanttoSections0.457and0.459oftheCommission’sRules,theApplicant herebyrequestsconfidentialtreatmentofinformationaccompanyingoffollowing product: ProductName:LTEWirelessRouter ProductModel:MF266，MF266B FCCID:SRQ-MF266 Thefollowinginformationshouldbeheldconfidential: AllSchematics/blockdiagrams AllPartslistfortheaboveschematicdiagram Tune-UpProcedure Operationaldescriptionandtechnicaloverviewofproduct SoftwareOperationalDescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesemattersmightbeharmfultothe applicantandprovideunjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoRule0.457,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethe dateoftheGrantforthisapplication. CertificationManager:GongYu 2021/4/23 ZTECorporation Address:ZTEPlaza,#55KejiRoadSouth,Hi-Tech,IndustrialPark,Nanshan District,Guangdong Tel:+86-21-68895397 Fax:+86-21-50801070

ZTECorporation ZTEPlaza,#55KejiRoadSouth,Hi-Tech,IndustrialPark,Nanshan District,Guangdong AuthorizationLetter Date:April23,2021 Towhomitmayconcern: We,theundersigned,herebyauthorizeTheStateRadio_monitoring_center TestingCenter(SRTC)toactonourbehalf,asouragent,inthefollowing mattersrelatedtotheFCCapproval,ICcertificationapprovalofourproduct: ProductName:LTEWirelessRouter ProductModel:MF266，MF266B FCCID:SRQ-MF266 Reportsubmittal,relatedcorrespondence,thesigningofalldocumentsrelating tothesematters,andanyotherlawfulactivitynecessarytoobtainsuch certification.AnyactcarriedoutbyTheStateRadio_monitoring_centerTesting Center(SRTC)withinthescopeofthisauthorizationshallhavethesame effectsasourown. Thisauthorizationshallexpire2monthsfromoriginaldate.Ifyouhaveany questionregardingtheauthorization,pleasedon’thesitatetocontactwithme. Thankyou. CertificationManager:GongYu ZTECorporation ZTEPlaza,#55KejiRoadSouth,Hi-Tech,IndustrialPark,Nanshan District,Guangdong Tel:+86-21-68895397 Fax:+86-21-50801070

External Photo 1 / 6 FCC ID : SRQ‐MF266 External Photo 2 / 6 FCC ID : SRQ‐MF266 External Photo 3 / 6 FCC ID : SRQ‐MF266 External Photo 4 / 6 FCC ID : SRQ‐MF266 POE‐A4803‐Zmade by Shanghai Biaojun Electronic Technology Co,.LTD External Photo 5 / 6 FCC ID : SRQ‐MF266 POE‐A4803‐Zmade by Shanghai Biaojun Electronic Technology Co,.LTD POE‐A4803‐Zmade by Shanghai Biaojun Electronic Technology Co,.LTD External Photo 6 / 6 FCC ID : SRQ‐MF266 POE‐A4803‐Zmade by Shanghai Biaojun Electronic Technology Co,.LTD

SRQ ‐ MF266 Label and Location SRQ ‐ MF266 Label and Location

Internal Photo 1 / 11 FCC ID : SRQ‐MF266 Internal Photo 2 / 11 FCC ID : SRQ‐MF266 Internal Photo 3 / 11 FCC ID : SRQ‐MF266 Internal Photo 4 / 11 FCC ID : SRQ‐MF266 IC Detail 1 IC Detail 2 Internal Photo 5 / 11 FCC ID : SRQ‐MF266 IC Detail 3 IC Detail 4 Internal Photo 6 / 11 FCC ID : SRQ‐MF266 IC Detail 5 IC Detail 6 Internal Photo 7 / 11 FCC ID : SRQ‐MF266 IC Detail 7 IC Detail 8 Internal Photo 8 / 11 FCC ID : SRQ‐MF266 IC Detail 9 IC Detail 10 Internal Photo 9 / 11 FCC ID : SRQ‐MF266 IC Detail 11 IC Detail 12 Internal Photo 10 / 11 FCC ID : SRQ‐MF266 Antenna Location Internal Photo 11 / 11 FCC ID : SRQ‐MF266

Certificate Number: 5055.02 MPE REPORT Report No.: SRTC2021-9004(F)-21030306(I) Product Name: LTE Wireless Router Product Model: MF266, MF266B Applicant: ZTE CORPORATION Manufacturer: ZTE CORPORATION Specification: FCC Part §2.1091, §2.1093, §1.1307(b), §1.1310 (2020) FCC ID: SRQ-MF266 The State Radio_monitoring_center Testing Center (SRTC) 15th Building, No.30 Shixing Street, Shijingshan District, Beijing, P.R.China Tel: 86-10-57996183 Fax: 86-10-57996388 No.: SRTC2021-9004(F)-21030306(I) FCC ID: SRQ-MF266 The State Radio_monitoring_center Testing Center (SRTC) Page number: 1 of 8 Tel: 86-10-5799 6183 Fax: 86-10-57996388 V3.0.0 CONTENTS 1 GENERAL INFORMATION .....................................................................................................................................2 1.1 NOTES OF THE TEST REPORT .................................................................................................................................... 2 1.2 INFORMATION ABOUT THE TESTING LABORATORY ..................................................................................................... 2 1.3 APPLICANT’S DETAILS ................................................................................................................................................ 2 1.4 MANUFACTURER’S DETAILS ....................................................................................................................................... 2 2 DESCRIPTION OF THE DEVICE UNDER TEST ..................................................................................................3 2.1 FINAL EQUIPMENT BUILD STATUS ............................................................................................................................. 3 3 REFERENCE SPECIFICATION .............................................................................................................................4 4 RESULT SUMMARY ...............................................................................................................................................5 5 TEST RESULTS.......................................................................................................................................................6 5.1 AVERAGE POWER OUTPUT TEST RESULT ................................................................................................................ 6 5.2 CALCULATION RESULT ............................................................................................................................................... 7 No.: SRTC2021-9004(F)-21030306(I) FCC ID: SRQ-MF266 The State Radio_monitoring_center Testing Center (SRTC) Page number: 2 of 8 Tel: 86-10-5799 6183 Fax: 86-10-57996388 V3.0.0 1 GENERAL INFORMATION 1.1 Notes of the test report The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written permission of The State Radio_monitoring_center Testing Center (SRTC). The test results relate only to individual items of the samples which have been tested.The certification and accreditation identifiers used in this report shall not be applicable to the tested or calibrated samples thereof. The manufacturer shall not mark the tested samples or items (or a separate part of the item) with the identifiers of certification and accreditation to mislead relevant parties about the tested samples or items. 1.2 Information about the testing laboratory Company: The State Radio_monitoring_center Testing Center (SRTC) Address: 15th Building, No.30 Shixing Street, Shijingshan District, P.R.China City: Beijing Country or Region: P.R.China Contacted person: Liu Jia Tel: +86 10 57996183 Fax: +86 10 57996388 Email: [email protected] 1.3 Applicant’s details Company: ZTE CORPORATION Address: ZTE Plaza, #55 Keji Road South, Hi-Tech, Industrial Park, Nanshan District,Guangdong City: Shenzhen Country or Region: China Contacted person: Gong Yu Tel: +86-21-68895397 Fax: --- Email: [email protected] 1.4 Manufacturer’s details Company: ZTE CORPORATION Address: ZTE Plaza, #55 Keji Road South, Hi-Tech, Industrial Park, Nanshan District,Guangdong City: Shenzhen Country or Region: China Contacted person: Gong Yu Tel: +86-21-68895397 Fax: --- Email: [email protected] No.: SRTC2021-9004(F)-21030306(I) FCC ID: SRQ-MF266 The State Radio_monitoring_center Testing Center (SRTC) Page number: 3 of 8 Tel: 86-10-5799 6183 Fax: 86-10-57996388 V3.0.0 2 DESCRIPTION OF THE DEVICE UNDER TEST 2.1 Final Equipment Build Status Frequency Bands GSMS850/1900 WCDMA Band II/IV/V LTE Band 2/4/5/7/38/41 Mode GSM: GPRS(GMSK),EDGE(GMSK/8PSK) WCDMA: RMC 12.2Kbps/HSDPA/HSUPA/DC-HSDPA/HSPA+ LTE: QPSK/16QAM/64QAM Power Supply Charger Hardware Version PCBMF266B-1.0 Software Version BD_CLAPEODUMF266BV1.0.0B01 IMEI 866227050009630 No.: SRTC2021-9004(F)-21030306(I) FCC ID: SRQ-MF266 The State Radio_monitoring_center Testing Center (SRTC) Page number: 4 of 8 Tel: 86-10-5799 6183 Fax: 86-10-57996388 V3.0.0 3 REFERENCE SPECIFICATION Specification Version Title 2.1091 2020 Radio frequency radiation exposure evaluation: mobile devices. 2.1093 2020 Radio frequency radiation exposure evaluation: portable devices. 1.1307(b) 2020 Actions that may have a significant environmental effect, for which Environmental Assessments (EAs) must be prepared. 1.1310 2020 Radio frequency radiation exposure limits. KDB447498 October 23, 2015 RF exposure procedures and equipment authorization policies for mobile and portable devices No.: SRTC2021-9004(F)-21030306(I) FCC ID: SRQ-MF266 The State Radio_monitoring_center Testing Center (SRTC) Page number: 5 of 8 Tel: 86-10-5799 6183 Fax: 86-10-57996388 V3.0.0 4 RESULT SUMMARY No. Test case FCC reference 1 MPE Calculation FCC Part §2.1091, FCC Part §2.1093, FCC Part §1.1307(b) FCC Part §1.1310 KDB 447498 This Test Report Is Issued by: Mr. Peng Zhen Checked by: Mr. Li Bin Tested by: Mr. Tong Daocheng Issued date: 20210427 No.: SRTC2021-9004(F)-21030306(I) FCC…

Text truncated - open the document above for the full version.

Certificate Number: 5055.02 TEST REPORT FOR GSM TESTING Report No.: SRTC2021-9004(F)-21030306(A) Product Name: LTE Wireless Router Product Model: MF266, MF266B Applicant: ZTE CORPORATION Manufacturer: ZTE CORPORATION Specification: FCC Part 24E, Part 22H, Part 2 (2020) FCC ID: SRQ-MF266 The State Radio_monitoring_center Testing Center (SRTC) 15th Building, No.30 Shixing Street, Shijingshan District, Beijing, P.R.China Tel: 86-10-57996183 Fax: 86-10-57996388 No.: SRTC2021-9004(F)-21030306(A) FCC ID: SRQ-MF266 The State Radio_monitoring_center Testing Center (SRTC) Page number: 1 of 55 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 CONTENTS 1. GENERAL INFORMATION ................................................................................................................................ 2 1.1 Notes of the test report .............................................................................................................................. 2 1.2 Information about the testing laboratory ................................................................................................. 2 1.3 Applicant’s details ....................................................................................................................................... 2 1.4 Manufacturer’s details ................................................................................................................................ 2 1.5 Test Environment ....................................................................................................................................... 3 2 DESCRIPTION OF THE DEVICE UNDER TEST ............................................................................................ 4 2.1 Final Equipment Build Status .................................................................................................................... 4 2.2 Support Equipment .................................................................................................................................... 4 2.3 Summary table. ........................................................................................................................................... 4 3 REFERENCE SPECIFICATION ......................................................................................................................... 5 4 KEY TO NOTES AND RESULT CODES .......................................................................................................... 5 5 RESULT SUMMARY ............................................................................................................................................ 6 6 TEST RESULT ....................................................................................................................................................... 7 6.1 RF Power Output ........................................................................................................................................ 7 6.2 Effective Radiated Power and Effective Isotropic Radiated Power .................................................... 8 6.3 Occupied Bandwidth .................................................................................................................................. 9 6.4 Emission Bandwidth- ............................................................................................................................... 10 6.5 Spurious Emissions at antenna terminal ............................................................................................... 11 6.6 Band Edges Compliance ......................................................................................................................... 12 6.7 Frequency Stability ................................................................................................................................... 13 6.8 Radiated Spurious Emissions ................................................................................................................. 14 6.9 Peak-Average Ratio ................................................................................................................................. 16 7 MEASUREMENT UNCERTAINTIES ............................................................................................................... 17 8 TEST EQUIPMENTS .......................................................................................................................................... 18 APPENDIX A – TEST DATA OF CONDUCTED EMISSION ........................................................................... 19 APPENDIX B – TEST DATA OF RADIATED EMISSION ................................................................................ 19 No.: SRTC2021-9004(F)-21030306(A) FCC ID: SRQ-MF266 The State Radio_monitoring_center Testing Center (SRTC) Page number: 2 of 55 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 1. GENERAL INFORMATION 1.1 Notes of the test report The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written permission of The State Radio_monitoring_center Testing Center (SRTC).The test results relate only to individual items of the samples which have been tested. The certification and accreditation identifiers used in this report shall not be applicable to the tested or calibrated samples thereof. The manufacturer shall not mark the tested samples or items (or a separate part of the item) with the identifiers of certification and accreditation to mislead relevant parties about the tested samples or items. 1.2 Information about the testing laboratory Company: The State Radio_monitoring_center Testing Center (SRTC) Address: 15th Building, No.30 Shixing Street, Shijingshan District, P.R.China City: Beijing Country or Region: P.R.China Contacted person: Liu Jia Tel: +86 10 57996183 Fax: +86 10 57996388 Email: [email protected] 1.3 Applicant’s details Company: ZTE CORPORATION Address: ZTE Plaza, #55 Keji Road S…

Text truncated - open the document above for the full version.

Certificate Number: 5055.02 TEST REPORT FOR WCDMA TESTING Report No.: SRTC2021-9004(F)-21030306(B) Product Name: LTE Wireless Router Product Model: MF266, MF266B Applicant: ZTE CORPORATION Manufacturer: ZTE CORPORATION Specification: FCC Part 24E, Part 22H, Part 2, Part 27 (2020) FCC ID: SRQ-MF266 The State Radio_monitoring_center Testing Center (SRTC) 15th Building, No.30 Shixing Street, Shijingshan District, Beijing, P.R.China Tel: 86-10-57996183 Fax: 86-10-57996388 No.: SRTC2021-9004(F)-21030306(B) FCC ID: SRQ-MF266 The State Radio_monitoring_center Testing Center (SRTC) Page number: 1 of 111 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 CONTENTS 1. GENERAL INFORMATION ................................................................................................................................ 2 1.1 Notes of the test report .............................................................................................................................. 2 1.2 Information about the testing laboratory ................................................................................................. 2 1.3 Applicant’s details ....................................................................................................................................... 2 1.4 Manufacturer’s details ................................................................................................................................ 2 1.5 Test Environment ....................................................................................................................................... 3 2 DESCRIPTION OF THE DEVICE UNDER TEST ............................................................................................ 4 2.1Final Equipment Build Status ..................................................................................................................... 4 2.2 Support Equipment .................................................................................................................................... 4 2.3 Summary table. ........................................................................................................................................... 4 3 REFERENCE SPECIFICATION ......................................................................................................................... 5 4 KEY TO NOTES AND RESULT CODES .......................................................................................................... 5 5 RESULT SUMMARY ............................................................................................................................................ 6 6 TEST RESULT ....................................................................................................................................................... 7 6.1 RF Power Output ................................................................................................................................ 7 6.2 Effective Radiated Power and Effective Isotropic Radiated Power ............................................ 8 6.3 Occupied Bandwidth .......................................................................................................................... 9 6.4 Emission Bandwidth ......................................................................................................................... 10 6.5 Spurious Emissions at antenna terminal ....................................................................................... 11 6.6 Band Edges Compliance ................................................................................................................. 12 6.7 Frequency Stability ........................................................................................................................... 13 6.8 Radiated Spurious Emissions ......................................................................................................... 14 6.9 Peak-Average Ratio ......................................................................................................................... 16 7 MEASUREMENT UNCERTAINTIES ............................................................................................................... 17 8 TEST EQUIPMENTS .......................................................................................................................................... 18 APPENDIX A – TEST DATA OF CONDUCTED EMISSION ........................................................................... 19 APPENDIX B – TEST DATA OF RADIATED EMISSION .............................................................................. 106 No.: SRTC2021-9004(F)-21030306(B) FCC ID: SRQ-MF266 The State Radio_monitoring_center Testing Center (SRTC) Page number: 2 of 111 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 1. GENERAL INFORMATION 1.1 Notes of the test report The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written permission of The State Radio_monitoring_center Testing Center (SRTC).The test results relate only to individual items of the samples which have been tested. The certification and accreditation identifiers used in this report shall not be applicable to the tested or calibrated samples thereof. The manufacturer shall not mark the tested samples or items (or a separate part of the item) with the identifiers of certification and accreditation to mislead relevant parties about the tested samples or items. 1.2 Information about the testing laboratory Company: The State Radio_monitoring_center Testing Center (SRTC) Address: 15th Building, No.30 Shixing Street, Shijingshan District, P.R.China City: Beijing Country or Region: P.R.China Contacted person: Liu Jia Tel: +86 10 57996183 Fax: +86 10 57996388 Email: [email protected] 1.3 Applicant’s details Company: ZTE CORPORATION Address: ZTE Plaza, #55 Keji Road South, Hi-Tech, Industrial Park, Nanshan District,Guangdong …

Text truncated - open the document above for the full version.

No.: SRTC2021-9004(F)-21030306(B) FCC ID: SRQ-MF266 The State Radio_monitoring_center Testing Center (SRTC) Page number: 64 of 111 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 HSUPA Mode: Channel 1412 30MHz~1GHz(dBm) Note: The signal beyond the limit is the signal transmitted by EUT. Channel 1412 1GHz~20GHz(dBm) No.: SRTC2021-9004(F)-21030306(B) FCC ID: SRQ-MF266 The State Radio_monitoring_center Testing Center (SRTC) Page number: 65 of 111 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 5. Band Edges Compliance WCDMA band IV REL99 Mode: Channel 1312 Channel 1513 No.: SRTC2021-9004(F)-21030306(B) FCC ID: SRQ-MF266 The State Radio_monitoring_center Testing Center (SRTC) Page number: 66 of 111 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 HSDPA Mode: Channel 1312 Channel 1513 No.: SRTC2021-9004(F)-21030306(B) FCC ID: SRQ-MF266 The State Radio_monitoring_center Testing Center (SRTC) Page number: 67 of 111 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 HSUPA Mode: Channel 1312 Channel 1513 No.: SRTC2021-9004(F)-21030306(B) FCC ID: SRQ-MF266 The State Radio_monitoring_center Testing Center (SRTC) Page number: 68 of 111 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 6. Frequency Stability WCDMA band IV REL99 Mode: Temperature(°C) Test Result (ppm)@NV Channel 1312 Channel 1412 Channel 1513 -40 0.001 -0.012 0.010 -30 -0.001 -0.011 0.008 -20 -0.014 -0.001 0.005 -10 0.000 -0.003 0.001 0 0.000 0.000 0.000 +10 0.005 -0.005 -0.014 +20 -0.003 0.006 -0.014 +30 -0.007 0.001 -0.009 +40 -0.002 -0.006 0.009 +50 0.009 0.001 -0.010 +55 -0.001 -0.001 0.008 Voltage Test Result (ppm)@NT Channel 1312 Channel 1412 Channel 1513 LV 0.010 -0.004 0.010 HV 0.008 -0.003 -0.006 HSDPA Mode: Temperature(°C) Test Result (ppm)@NV Channel 1312 Channel 1412 Channel 1513 -40 0.015 0.014 -0.010 -30 -0.011 -0.003 -0.014 -20 0.001 0.000 -0.003 -10 -0.014 -0.004 0.011 0 0.005 0.005 0.006 +10 -0.005 0.004 -0.001 +20 0.000 0.000 0.000 +30 -0.008 -0.006 0.001 +40 -0.006 0.005 0.011 +50 0.013 0.004 0.002 +55 -0.003 0.009 -0.004 Voltage Test Result (ppm)@NT Channel 1312 Channel 1412 Channel 1513 LV 0.006 0.008 -0.011 HV -0.013 0.006 -0.012 No.: SRTC2021-9004(F)-21030306(B) FCC ID: SRQ-MF266 The State Radio_monitoring_center Testing Center (SRTC) Page number: 69 of 111 Tel: 86-10-57996183 Fax: 86-10-57996388 V3.0.0 HSUPA Mode: Temperature(°C) Test Result (ppm)@NV Channel 1312 Channel 1412 Channel 1513 -40 0.001 -0.003 0.011 -30 0.006 0.014 0.000 -20 -0.006 -0.009 0.012 -10 -0.001 -0.004 -0.013 0 0.001 0.002 -0.004 +10 -0.006 0.010 0.011 +20 0.000 0.000 0.000 +30 -0.001 0.009 0.007 +40 -0.009 0.007 0.004 +50 -0.002 0.002 -0.006 +55 0.001 0.000 -0.014 Voltag…

Text truncated - open the document above for the full version.