SRQ-MF289FMF289F with GSM, LTE and WIFI

1 Gettting started MF28 Let’s with your d 89F go evice. 2 1. Prepare  Avalid nano-SIM card.  View the label on your device to get the default information. The following figure is for your reference only. 2. Inse Open the s ertthenano lot cover at the 3 o-SIM Card bottom of the d d evice and inserrtthenano-SIM ccard. 3. Pow Connect the on and con wer on You e power adapte nect to the Inter 4 ur Device er to your device rnet automatica e and then your ally device will be ppowered 4. Acc  Wi-Fi and c the In cess the In i:Get the defaul connect to the W nternet. 5 nternet lt WLAN SSID a Wi-Fi network wit and WLAN key( th your mobile d (password) on t device, and then the label n access 6  Network cable(RJ45):Connect with the computervia port WAN/LAN1 or LAN2 and access the Internet. 7 5. Change YourDevice Settings You can change the device settings by logging in to the 4G CPE web page. 1. View the label on your device to get thedefault Device Manager Website IP addressandWebsite Password. 2. Launch the Internet browser and enter theDevice Manager Website IP address in the address bar. 3. Input the Website Password and then click Login. 4. After the 4G CPE web page is opened, you can change the Wi-Fi SSID, password or other settings. Cable B Your device from your s 1. Connec network 2. Log in t 3. Change NOTE: Please dis c 4. Set the 5. Use yo Broadband e supports the c service provider ct the WAN/LAN k cable. to the 4G CPE w e the operation connect from the detailedparame ur clients to acc 8 d Mode cable broadban to access the In N1 port and the web page. mode to Cable e Internet first a etersgiven by yo cess the Interne nd mode and yo nternet. broadband serv Broadband Mo and then you can our service prov et. ou can use this vice network po ode. n change the m vider. s service ort with a mode. 9 Mesh Network Function Your device supports the mesh network function. You can use your device and other devices of the same model to form a larger range of Wi-Fi network in your house, and ensure seamless Wi-Fi roaming when you move. To set you 1. Log in 2. View t 3. Click 4. Set th click A 5. Add su 6. Enjoy NOTE: Please rem or other clie r mesh networ to the 4G CPE he current mes to switc h e Mesh Networ Apply. ub node device your mesh net w : member the Wi-F ents will use the 10 rk: web page. h network statu h on the mesh n rk Wi-Fi parame to the mesh ne work. Fi parameters y em to join in you s and then click etwork and then eters for your m etwork. you set. Your sm ur mesh network k. n click Wi-Fi se mesh network a mart phone, pad k. ettings. and then d, laptop Telepho Your devic function, yo To make a c 1. Pick up 2. Dial the 3. Wait for one Funct ce supports the ou need to inser call: p the handset. e telephone num r the call to be c 11 tion e telephone fu rt the nano-SIM mber. connected. unction. Before card and conne e using the te ect the telephon elephone ne. 12 WPS Function Your device supports the WPS function. You can use this function to connect a client to your device. 1. Press and hold the WPS button for about 5 seconds to activate the WPS function. 2. Enable the WPS function on your client. 3. Follow the system prompts on your client to establish the connection. Indicato or Lights 13 and Interffaces 14 1. POWER White on: Power is on and external power supply is working normally. Off: Power is off. 2. WIFI White on:  Wi-Fi works normally withon data transmission.  Mesh network works normally. White blinking(slowly):  Wi-Fi works normally with data transmission.  The mesh network function is enabled and the mesh network isn’t created.  The mesh network is created unsuccessfully. White blinking(fast):  WPS is activating.  The mesh network is being created. Off: Wi-Fi is off. 3. NETWORK Red on:The device is in error status.  The device isnot registered to the mobile network.  There is no nano-SIM card inserted.  There is no network service available. Green on: The device isregistered to the 2G/3Gmobile network. Green blinking: The device isconnected to the 2G/3Gmobile network and data is being transferred. Whiteon: The device isregistered to the 4GLTE network. White blinking: The device isconnected to the 4G LTE network and data is being transferred. 4. WPS key Press and hold for about 5 seconds to activate the WPS function. 5 External antenna Connect to external antennas. 15 port 6 PHONE port Connect to a telephone. 7. LAN ports WAN/LAN1 port: Connect to the WAN in the Cable Broadband Mode or connect to a PC. LAN2 port: Connect to a PC. 8. Power port Connect to the power adapter. 9. nano-SIMcard slotandreset hole Insert your nano-SIM card. Reset hole: Press and hold for about 3 seconds to restore your device to the factory settings. 16 Troubleshooting Internet Related Problems Symptoms Possible Problems / Solutions I cannot access the Internet at all. • Please check your configuration settings. • Please wait 1~ 2 minutes for the device to initialize. • Check your network indicators. The download or upload speed is very slow. The speed is dependent on signal strength. Check your signal strength and network type. I cannot visit the 4G CPE web page. • Enter the correct IP address. You can view the label on your device to get the default IP address. • Only use one network adapter in your PC. • Do not use any proxy server. I cannot establish the Wi-Fi connection between my device and the client. • Make sure the Wi-Fi function is active. • Refresh network list and select the correct SSID. • Check the IP address to make sure your client can obtain an IP address automatically in the Internet protocol (TCP/IP) properties. • Type the correct network key (Wi-Fi password) when you connect to the device. 17 Voice Related Problems Symptoms Possible Problems/ Solutions There is no dial tone. Please wait for 1~2 minutes after the device is turned on. Please checkthe NETWORK indicator. If you have no good RF reception, change the location of the device. There is a prompt / phone alert / a…

Text truncated - open the document above for the full version.

ZTE Corporation POWER OF ATTORNEY DATE: July 7, 2021 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 We, the undersigned, hereby authorize TA Technology (Shanghai) Co., Ltd. /Huang Ting on our behalf, to apply to FCC on our equipment for FCC ID: SRQ-MF289F. Any and all acts carried out by TA Technology (Shanghai) Co., Ltd. / Huang Ting on our behalf shall have the same effect as acts of our own. Sincerely, Print name: Yu Gong Company: ZTE Corporation.

ZTE Corporation Request for Confidentiality Date: _2021-7-7_ Subject: Confidentiality Request for: _____ FCC ID: SRQ-MF289F______ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ ______ ZTE Corporation _____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __180_ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TCB in the event information regarding the product or the product is made available to the public. TCB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: Yu Gong (Signature/Title 2 ) (Print name)

ZTE Corporation UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: SRQ-MF289F (1) DFS Device -- Master, Client with Radar detection capability , Client without radar detection capability, N/A (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 2412 – 2462 MHz Yes, No Yes, No Yes, No Yes, No 2422 – 2452 MHz Yes, No Yes, No Yes, No Yes, No 5745 – 5825 MHz Yes, No Yes, No Yes, No Yes, No 5755 – 5795 MHz Yes, No Yes, No Yes, No Yes, No 5180 – 5240 MHz Yes, No Yes, No Yes, No Yes, No 5190 – 5230 MHz Yes, No Yes, No Yes, No Yes, No 5260 – 5320 MHz Yes, No Yes, No Yes, No Yes, No 5270 – 5310 MHz Yes, No Yes, No Yes, No Yes, No 5500 – 5700 MHz Yes, No Yes, No Yes, No Yes, No 5510 – 5670 MHz Yes, No Yes, No Yes, No Yes, No (3) Country code selection ability - Yes , No If no, pls explain how was implemented : use network utility (4) Meet 15.202 requirement - Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply , (If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Printed Name：Gong Yu

EUTAppearanceReportNo.:R2102A0149 TATechnology(Shanghai)Co.,Ltd.Page1of4 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. EUTAppearance EUTAppearanceReportNo.:R2102A0149 TATechnology(Shanghai)Co.,Ltd.Page2of4 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. EUTAppearanceReportNo.:R2102A0149 TATechnology(Shanghai)Co.,Ltd.Page3of4 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. a:EUT EUTAppearanceReportNo.:R2102A0149 TATechnology(Shanghai)Co.,Ltd.Page4of4 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. bAdapter Picture1:ConstituentsofEUT

Internal photo

MPE TEST REPORT Applicant ZTE Corporation FCC ID SRQ-MF289F Product MF289F Model MF289F Report No. R2102A0149-M1 Issue Date July 7, 2021 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC 47 CFR Part 1 1.1310. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Prepared by: Yurui Zhao Approved by: Guangchang Fan TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 MPE Test Report Report No.: R2102A0149-M1 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 2 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory ............................................................................................................................... 3 1.1 Notes of the Test Report ......................................................................................................... 3 1.2 Testing Location ...................................................................................................................... 3 1.3 Laboratory Environment .......................................................................................................... 3 2 Description of Equipment under Test .............................................................................................. 5 3 Maximum conducted output power (measured) and antenna Gain ................................................ 6 4 Test Result ..................................................................................................................................... 8 ANNEX A： The EUT Appearance ......................................................................... 错误！未定义书签。 A.1 EUT Appearance ........................................................................................... 错误！未定义书签。 MPE Test Report Report No.: R2102A0149-M1 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 3 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1 Test Laboratory 1.1 Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd.The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2. Test facility FCC (Designation number: CN1179, Test Firm Registration Number: 446626) TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform measurements. 1.3 Testing Location Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China City: Shanghai Post code: 201201 Country: P. R. China Contact: Fan Guangchang Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: [email protected] 1.4 Laboratory Environment Temperature Min. = 18C, Max. = 25 C MPE Test Report Report No.: R2102A0149-M1 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 4 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Relative humidity Min. = 30%, Max. = 70% Ground system resistance < 0.5  Ambient noise is checked and found very low and in compliance with requirement of standards. Reflection of surrounding objects is minimized and in compliance with requirement of standards. MPE Test Report Report No.: R2102A0149-M1 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 5 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 2 Description of Equipment under Test Client Information Applicant ZTE Corporation Applicant address ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park, Nanshan District, Shenzhen, Guangdong, 518057, P.R.China Manufacturer ZTE Corporation Manufacturer address ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park, Nanshan District, Shenzhen, Guangdong, 518057, P.R.China General Technologies Model MF289F IMEI 864781050000249 Hardware Version mb5B Software Version VDF_DE_MF289FV1.0.0B01 Note: 1. The EUT is sent from the applicant to TA and the information of the EUT is declared by the applicant. 2. All indications of Pass/Fail in this report are opinions expressed by TA Technology (Shanghai) Co., Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. MPE Test Report Report No.: R2102A0149-M1 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 6 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 3 Maximum conducted output power (measured) and antenna Gain The numeric gain (G) of the antenna with a gain specified in dB is determined by Numeric gain (G)=10^(antenna gain/10) Band Burst Turn up Power(dBm) Division Factors (dB) Time-Averaged Tune up Power (dBm) GSM850 GSM 34.00 -9.03 24.97 GPRS/EGPRS (GMSK) 1 Tx Slot 34.00 -9.03 24.97 2 Tx Slots 34.00 -6.02 27.98 EGPRS (8PSK) 1 Tx Slot 28.00 -9.03 18.97 2 Tx Slots 28.00 -6.02 21.98 3 Tx Slots 28.00 -4.26 23.74 4 Tx Slots 28.00 -3.01 24.99 GSM1900 GSM 31.00 -9.03 21.97 GPRS/EGPRS (GMSK) 1 Tx Slot 31.00 -9.03 21.97 2 Tx Slots 31.00 -6.02 24.98 EGPRS (8PSK) 1 Tx Slot 27.00 -9.03 17.97 2 Tx Slots 27.00 -6.02 20.98 3 Tx Slots 27.00 -4.26 22.74 4 Tx Slots 27.00 -3.01 23.99 Note: Division …

Text truncated - open the document above for the full version.

Prepared by: Peng Tao Approved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 RF TEST REPORT Applicant ZTE Corporation FCC ID SRQ-MF289F Product MF289F Model MF289F Report No. R2102A0149-R4 Issue Date July 7, 2021 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC CFR47 Part 15C (2020). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. RF Test Report Report No.: R2102A0149-R4 TA Technology (Shanghai) Co., Ltd. TA-MB-04-005R Page 2 of 76 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENT 1. Test Laboratory ............................................................................................................................ 4 1.1. Notes of the test report ......................................................................................................... 4 1.2. Test facility ........................................................................................................................... 4 1.3. Testing Location ................................................................................................................... 4 2. General Description of Equipment under Test .............................................................................. 5 2.1. Applicant and Manufacturer Information ............................................................................... 5 2.2. General information .............................................................................................................. 5 3. Applied Standards ........................................................................................................................ 6 4. Test Configuration ........................................................................................................................ 7 5. Test Case Results ........................................................................................................................ 9 5.1. Maximum output power ........................................................................................................ 9 5.2. 99% Bandwidth and 6dB Bandwidth .................................................................................. 13 5.3. Band Edge ......................................................................................................................... 19 5.4. Power Spectral Density ...................................................................................................... 22 5.5. Spurious RF Conducted Emissions ............................... ..................................................... 35 5.6. Unwanted Emission ........................................................................................................... 39 5.7. Conducted Emission .......................................................................................................... 71 6. Main Test Instruments ................................................................................................................ 74 ANNEX A: The EUT Appearance ...................................................................................................... 75 ANNEX B: Test Setup Photos ........................................................................................................... 76 RF Test Report Report No.: R2102A0149-R4 TA Technology (Shanghai) Co., Ltd. TA-MB-04-005R Page 3 of 76 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Summary of measurement results Number Test Case Clause in FCC rules Verdict 1 Maximum output power 15.247(b)(3) PASS 2 6 dB bandwidth 15.247(a)(2) PASS 3 Power spectral density 15.247(e) PASS 4 Band Edge 15.247(d) PASS 5 Spurious RF Conducted Emissions 15.247(d) PASS 6 Unwanted Emissions 15.247(d),15.205,15.209 PASS 7 Conducted Emissions 15.207 PASS Date of Testing: June 9, 2021 ~ July 5, 2021 Date of Sample Received: February 22, 2021 Note: All indications of Pass/Fail in this report are opinions expressed by TA Technology (Shanghai) Co., Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. RF Test Report Report No.: R2102A0149-R4 TA Technology (Shanghai) Co., Ltd. TA-MB-04-005R Page 4 of 76 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1. Test Laboratory 1.1. Notes of the test report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2. Test facility FCC (Designation number: CN1179, Test Firm Registration Number: 446626) TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform measurements. A2LA (Certificate Number: 3857.01) TA Technology (Shanghai) Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform measurement. 1.3. Testing Location Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong City: Shanghai Post code: 201201 Country: P. R. China Contact: Xu Kai Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: [email protected] RF Test Report Repo…

Text truncated - open the document above for the full version.

TA Techno This report sh ANNEX A.1 Test FCC RF Test S ology (Shang hall not be repr X A: Part t Setup Setup ghai) Co., Lt roduced except 15C Test td. tin full, without t Setup 3 1 TA-MB- t the written ap 30MHz-1GH GHz-18GH -04-005R pproval of TA Te z z Re echnology (Shan eport No.: R210 Pa nghai) Co., Ltd. 02A0149 age 1 of 2 TA Techno This report sh FCC RF Test S ology (Shang hall not be repr Setup ghai) Co., Lt roduced except Pict Pictu td. tin full, without 18G ture 1 Radia ure 2 Condu TA-MB- t the written ap GHz - 26.5G ated Emiss ucted Emiss -04-005R pproval of TA Te GHz ion Test S e sion Test S Re echnology (Shan etup Setup eport No.: R210 Pa nghai) Co., Ltd. 02A0149 age 2 of 2