SRQ-MF863USB Modem

1 A002ZT USB Modem Quick Start Guide 2 Getting to Know Your Modem Your modem supports data services through the mobile phone network, enabling you to communicate anytime and anywhere. The following figure is only for your reference. The actual product may be different. 3 1. Rotatable USB connector 2. Indicator light Red blinking • There is no nano-SIM card inserted or the nano-SIM card is damaged. • The PIN or PUK is enabled. Red on • The device is just powered on. • The device is searching for available networks. • There is no network service available. Green on The device is connected to the 2G/3G mobile network and data is being transferred. Green blinking The device is registered to the 2G/3G mobile network. Blue on The device is connected to the LTE network and data is being transferred. Blue blinking The device is registered to the LTE network. 3. nano-SIM card slot cover 4 Installing the nano-SIM Card 1. Open the nano-SIM card slot cover. NOTE: Do not remove the cover rudely, because it is connected with the device. 2. Install a nano-SIM card to the nano-SIM card slot. WARNING! To avoid damage to the device, do not use any other kind of SIM cards, or any non-standard nano-SIM card cut from a SIM card. You can get a standard nano-SIM card from your service provider. 3. Close the nano-SIM card slot cover. 5 Connecting the Modem to Your PC Rotate the USB connector and insert the modem into your computer’s USB port securely. The operating system automatically detects and identifies your modem and installs the software automatically. NOTE: If the system does not launch installation automatically, you can double-click the modem installation icon in My Computer > ZTEMODEM to install the software. 6 Logging in to the Device Manager Website 1. Launch the Internet browser and enter http://192.168.0.1 in the address bar or click on your desktop. 2. Click Login and enter the password to log in to the Device Manager Website. NOTE: View the label on the device to get the default password. 7 Accessing the Internet After a client device is successfully connected to your device, you can access the Internet in Auto or Manual mode. The default mode is Manual. Mode Operation Auto Your device is automatically connected to the Internet. To set Auto mode: 1. Log in to the Device Manager Website. 2. Select Settings > Mobile Network > Network Settings > Connection Mode > Auto, and then click Save Changes. Manual 1. Log in to the Device Manager Website. 2. Select Home, and click Connect to connect to the Internet. NOTE: To change the current connection setting, please disconnect from the Internet first. 8 Getting More Help You can get help by:  Sending an email to [email protected]  Visiting www.ztedevices.com 9 LEGAL INFORMATION Copyright © 2020 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No.: R1.0 10 Warning and Notice Using Your Modem  If inadequately shielded, some electronic devices may be affected by the electromagnetic interference caused by the modem, such as the electronic system of vehicles. Consult the manufacturers of such devices before using the modem if necessary.  Operating the modem may interfere with medical instruments such as hearing aids and pacemakers. Always keep the modem more than 20 centimeters away from such medical instruments when your modem is turned on. Turn the modem off if necessary. Consult a physician or the manufacturers of medical instruments before using the modem if necessary.  Be aware of the usage limitation when using the modem at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Turn off the modem if necessary.  Do not use electronic transmission devices in aircrafts, at petrol stations or in hospitals. Observe and obey all warning signs, and turn off the modem in these conditions.  Do not touch the inner antenna area unless it is 11 necessary. Otherwise the performance of the modern may be affected.  Keep the modem out of the reach of little children. The modem may cause an injury if used as a toy.  When the modem is operating, do not touch the metallic parts. Failing to do so may cause burns.  Use original accessories or accessories that are authorized. Using any unauthorized accessories may affect the performance of the modem and violate the related national regulations about telecom terminals.  Avoid using the modem near or inside metallic structures or establishments that can emit electromagnetic waves, because signal reception may be affected.  The modem is not waterproof. Keep the modem dry and store it in a shady and cool place.  Do not use the modem immediately after a sudden temperature change. In such case dew may be generated inside and outside the modem, so do not use it until it becomes dry.  Handle the modem carefully. Do not drop, bend or strike it. Otherwise the modem may be damaged.  Only qualified personnel can dismantle and repair the modem.  An operating temperature between -10 °C and 12 +60 °C and a humidity between 5% and 95% are recommended. Limited Warranty  This warranty does not apply to defects or errors in the product caused by: i. Reasonable abrasion. ii. End users’ failure to follow ZTE’s installation, operation or maintenance instructions or procedures. iii. End users’ mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the product. iv. Modifications or repairs not provided by ZTE or a ZTE-certified individual. v. Power failures, surges, fire, flood, accidents, and actions of third parties or other events outside …

Text truncated - open the document above for the full version.

ZTE Corporation Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2020/6/11 Subject; Request for Confidentiality FCC ID: SRQ-MF863 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Bom List Tune up procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Yu Gong Title: Certification Manager

ZTE Corporation. Letter of Authorization Company: ZTE Corporation Address: ZTE Plaza, Keji Road South, Shenzhen, China Product Name: USB Modem Model Number: A002ZT , MF863 FCC Identifier: SRQ- MF863 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Yu Gong Date: 2020/6/11 Title: Certification Manager Signature of applicant:

External Photo

Internal Photo Main ANT LTE Sub ANT

Report No.: SET2020-05117 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page 1 of 19 EMC TEST REPORT Report No.: SET2020-05117 Product Name: USB Modem FCC ID: SRQ- MF863 Model No. : A002ZT,MF863 Applicant: ZTE Corporation Address: ZTE Plaza, Keji Road South, Shenzhen, China Received Date: 2020.05.06 Dates of Testing: 06/05/2020 —21/05/2020 Issued by: CCIC Southern Testing Co., Ltd. Lab Location: Electronic Testing Building, No. 43 Shahe Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China. Tel: 86 755 26627338 Fax: 86 755 26627238 This test report consists of 19 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CCIC-SET. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CCIC-SET within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. Report No.: SET2020-05117 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page 2 of 19 Te s t R e p o r t Product Name .................... USB Modem Model No. ......................... A002ZT,MF863 Trade name ZTE Applicant ............................ ZTE Corporation Applicant Address ............. ZTE Plaza, Keji Road South, Shenzhen, China Manufacturer ..................... ZTE Corporation Manufacturer Address ...... ZTE Plaza, Keji Road South, Shenzhen, China Test Standards ................... 47 CFR Part 15 Subpart B Test Result ......................... PASS Tested by .......................... Yun Lei Fang Test Engineer 2020.05.21 Reviewed by ...................... Chris You Senior Engineer 2020.05.21 Approved by ...................... 2020.05.21 Shuangwen Zhang, Manager Report No.: SET2020-05117 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page 3 of 19 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................... 4 1.1 EUT Description ......................................................................................................................... 4 1.2 Test Standards and Results ........................................................................................................ 5 1.3 Facilities and Accreditations ...................................................................................................... 6 1.3.1 Facilities .................................................................................................................................... 6 1.3.2 Test Environment Conditions .................................................................................................... 6 1.3.3 Measurement Uncertainty ......................................................................................................... 6 2. TEST CONDITIONS SETTING............................................................................................... 7 2.1 Test Mode .................................................................................................................................... 7 2.2 Test Setup and Equipments List ................................................................................................ 8 2.2.1 Conducted Emission.................................................................................................................. 8 2.2.2 Radiated Emission ..................................................................................................................... 8 3. 47 CFR PART 15B REQUIREMENTS .................................................................................. 11 3.1 Conducted Emission ................................................................................................................. 11 3.1.1 Requirement ............................................................................................................................ 11 3.1.2 Test Description ...................................................................................................................... 11 3.1.3 Test Result ............................................................................................................................... 11 3.2 Radiated Emission .................................................................................................................... 13 3.2.1 Requirement ............................................................................................................................ 13 3.2.2 Test Description ...................................................................................................................... 14 3.2.3 Test Result ............................................................................................................................... 15 Change History Issue Date Reason for change 1.0 2020.05.21 First edition Report No.: SET2020-05117 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page 4 of 19 1. GENERAL INFORMATION 1.1 EUT Description EUT Name .......................... .: USB Modem Trade Name.....................: ZTE Brand Name.....................: ZTE Hardware Version............ : md8B Software Version .................. : BD_A002ZTV0.0.0B03 Note1:The EUT is a USB Modem; Note 2:For a more detailed description, please refer to Specification or User’s Manual supplied by the applicant and/or manufacturer. Report No.: SET2020-05117 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page 5 of 19 1.2 Test Standards and Results The objective of the report is to perform testing according to 47 CFR Part 15 Subpart B: No. Identity Document Title 1 47 CFR Part 15 Subpart B 2018 Radio Frequency Devices Test detailed items/section required by FCC rules and results are as below: No. Section Description Result 1 15.107 Conducted Emission PASS 2 15.109 Radiated Emission PASS NO…

Text truncated - open the document above for the full version.

15B Setup photo