SRQ-Z963VLLTE/CDMA Dual-Mode Digital Mobile Phone

1 Z963VL User Manual 2 About This Manual Thank you for choosing this ZTE mobile device. In order to keep your device in its best condition, please read this manual and keep it for future reference. Copyright Copyright © 2016 ZTE CORPORATION All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. Notice ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice. This manual has been designed with the utmost care to ensure the accuracy of its content. However, all statements, information and recommendations contained therein do not constitute a warranty of any kind, either expressed or implied. Please refer to For Your Safety to be sure to use your phone properly and safely. We offer self-service for our smart terminal device users. Please visit the ZTE official website (at www.zteusa.com) for more information on self-service and supported product models. Information on the website takes precedence. 3 Disclaimer ZTE Corporation expressly disclaims any liability for faults and damages caused by unauthorized modifications of the software. Images and screenshots used in this manual may differ from the actual product. Content in this manual may differ from the actual product or software. Trademarks ZTE and the ZTE logos are trademarks of ZTE Corporation. Google and Android are trademarks of Google, Inc. LTE is a trademark of ETSI. The Bluetooth ® trademark and logos are owned by the Bluetooth SIG, Inc. and any use of such trademarks by ZTE Corporation is under license. microSDXC Logo is a trademark of SD-3C, LLC. Qualcomm ® Snapdragon™ processors are products of Qualcomm Technologies, Inc. Qualcomm and Snapdragon are trademarks of Qualcomm Incorporated, registered in the United States and other countries. Used with permission. 4 Version No.: R1.0 Edition Time: December 7, 2015 Manual No. : 5 Contents Getting Started ....................................................... 12 Knowing the Keys ............................................................ 14 Installing the nano-SIM Card/microSD Card ..................... 15 Charging the Battery ........................................................ 16 Extending the Battery Life ................................................ 18 Powering On/Off .............................................................. 18 Setting Up for the First Time ............................................. 18 Locking/Unlocking the Screen and Keys ........................... 19 Using the Touch Screen ................................................... 20 Getting to Know the Home Screen ................................... 24 Personalizing ......................................................... 27 Changing the System Language ...................................... 27 Setting the Date and Time ................................................ 27 Changing Ringtone and Notification Sound ...................... 28 Turning On/Off System Sounds ........................................ 28 Adjusting Volume ............................................................. 28 Switching to Silent Mode .................................................. 29 Applying New Wallpapers ................................................. 30 Changing Screen Brightness ............................................ 30 Setting the Theme ............................................................ 31 Setting the Home Screen Transition Effect ....................... 31 Protecting Your Phone With Screen Locks ........................ 31 Protecting Your Phone With Encryption ............................ 32 6 Protecting Your Phone With Screen Pinning ..................... 34 Knowing the Basics ............................................... 36 Monitoring the Phone Status ............................................ 36 Managing Notifications ..................................................... 36 Managing Shortcuts and Widgets ..................................... 40 Organizing With Folders .................................................. 41 Rearranging the Primary Shortcuts .................................. 42 Entering Text ................................................................... 42 Editing Text ...................................................................... 47 Opening and Switching Apps ........................................... 48 Uninstalling or Disabling an App ....................................... 48 Connecting to Networks and Devices .................. 50 Connecting to Mobile Networks ........................................ 50 Connecting to Wi-Fi ® ....................................................... 51 Connecting to Bluetooth ® Devices .................................... 55 Connecting to Your Computer via USB ............................. 57 Connecting to Virtual Private Networks ............................ 60 Phone Calls ............................................................ 62 Placing and Ending Calls ................................................. 62 Answering or Rejecting Calls ........................................... 63 Working With the Call History ........................................... 64 Calling Your Contacts ....................................................... 66 Checking Voicemail ......................................................... 66 Using Options During a Call ............................................. 67 7 Managing Multi-party Calls ............................................... 68 Adjusting Your Call Settings ............................................. 70 Contacts ................................................................. 77 Checking Contact Details ................................................. 77 Adding a New Contact ......................................…

Text truncated - open the document above for the full version.

RF_160, Issue 03 Declaration of Authorization We Name: <ZTE Corporation> Address: ZTE Plaza, Keji Road South, Shenzhen, China City: Shenzhen Country: China Declare that: Name Representative of agent: Michael Lin (1) Agent Company name: SPORTON INTERNATIONAL (KUNSHAN) INC Address: No. 3-2, PingXiang Road, Kunshan, Jiangsu Province, P.R.C. City: Kunshan Country China is authorized to apply for Certification of the following product(s): Product description: LTE/CDMA Dual-Mode Digital Mobile Phone Model Name: Z963VL Trademark: ZTE on our behalf. Date: December 17, 2015 City: China Name: Min Zhang (2) Function: Certification Manager Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 16-Jul-10 RF_501, Issue 6 Page 1 of 1 Company Name: ZTE Corporation Address : ZTE Plaza, Keji Road South, Shenzhen, China City: Shenzhen Country: China To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: SRQ-Z963VL Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: The applicant deems to be trade secrets and proprietary. Planned Release Date STC: 180 Days (notes 2, 3, 4, 5) Date: December 17, 2015 Name and signature of applicant: Min Zhang Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 1 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL 1. External Photograph of EUT Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 2 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 3 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 4 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 5 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 6 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 7 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL List of Accessory: Specification of Accessory AC Adapter Brand Name ZTE Model Name STC-A515A-Z Battery Brand Name ZTE Model Name Li3934T44P8h876744 USB Cable Signal Line Type 1.01m, shielded cable without core Remark: For accessories equipped with this EUT, please refer to the following photos. 2. Photograph of Accessory Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 8 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 9 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL AC Adapter Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 10 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Battery Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 11 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL

P895A17电池盖 （打样用丝印图） 丝印PT 冷灰9C Model:Z963VL GPZEZ963VCB FCC ID:SRQ- Made in ChinaZ963VL

Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 12 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL 3. Internal Photograph of EUT WWAN Diversity Antenna <Rx> WWAN Main Antenna <Tx/Rx> WLAN & Bluetooth Antenna <Tx/Rx> GPS & Glonass Antenna <Rx> Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 13 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 14 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 15 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 16 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 17 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 18 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 19 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 20 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 21 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 22 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 23 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 24 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 25 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 26 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 27 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 28 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 29 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 30 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 31 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 32 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Name: ZTE; Model Name: Z963VL SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 33 of 37 TEL : 86-0512-5790-0158 Report Issued Date : Dec. 18, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : SRQ-Z963VL Photographs of EUT Report No.: EP5N0901 Brand Na…

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL (KUNSHAN) INC. TEL : 86-0512-5790-0158 / FAX : 86-0512-5790-0958 Issued Date : Dec. 18, 2015 FCC ID : SRQ-Z963VL Page C1 of C1 Form version. : 151208 FCC SAR Test Report Report No. : FA5N0901 Appendix C. DASY Calibration Certificate The DASY calibration certificates are shown as follows. Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland Accredited by the Swiss Accreditation Service (SAS) The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration cerlificates crienr Sporton-CN (Auden) S Schweizerischer Kalibrierdienst ,. Service suisse d'6talonnage r' Servizio svizzero di taratura S Swiss Calibration Service Accreditation tlo.: SCS 0108 Calibration procedure(s) QA CAL-05.v9 Calibration procedure for dipole validation kits above 700 MHz This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (Sl). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3).C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards Power meler EPM-442A Power sensor HP 8481A Power sensor HP 8481A Reference 20 dB Attenuator Type-N mismatch combination Reference Probe ES3DV3 DAE4 Secondary Standards ln house check: Oct-16 ln house check: Oct-'|5 Signature Name lsrae Elnaouq Katja Pokovic Function Laboratory Technician Technieal Manager This calibration certificate shall not be reproduced except in full without written approval of the laboratory Page 1 of 8 Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland Schweizerischer Kalibrierdienst Service suisse d'6talonnage Servizio svizzero di taratura Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL ConvF N/A Accreditation tlo.: SCS 0108 tissue simulating liquid sensitivity in TSL / NORM x,y,z not applicable or not measured calibration is Performed According to the Following standards: a) IEEE Std 1528-2013, .IEEE Recommended Practice for Determining the Peak Spatial- Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2O1g b) IEC 62209-1, "Procedure to measure the Specific Absorption Rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation : d) DASY4/S System Handbook Methods Applied and lnterpretation of Parameters: . Measurement Conditions; Further details are available from the Validation Report at the end of the certificate. All figures stated in the cerlificate are valid at the frequency indicated. o Antenna Parameters with ISL; The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. . Feed Point lmpedance and Return Loss; These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. o Electrical Delay: One-way delay between the SMA connector and the antenna feed point. No uncertainty required. o SAR measured: SAR measured at the stated antenna input power. . SAR normalized'SAR as measured, normalized to an input power of 1 W at the antenna connector. . SAR for nominal TSL parameters; The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95o/". Page 2 of 8 Measurement Conditions Head TSL parameters Body TSL parameters SAR result with Body TSL ration, as far as not Extrapolation Advanced Extrapolation Phantom Modular FIat Phantom Distance Dipole Center - TSL with Spacer Zoom Scan Resolution dx, dy, dz = 5 mm Frequency and calculations were Temperature Permittivity Conductivity Nomina! Head TSL parameters Measured Head TSL parameters Head TSL temperature change during test SAR averaged over 1 cm3 11 g) of Head TSL SAR measured 250 mW input power SAR for nominal Head TSL parameters normalized to 1W 8.12 Wkg t17.O"h(k=2) SAR averaged over 10 cm3 (10 g) of Head TSL condition SAR measured 250 mW input power SAR for nominal Head TSL parameters normalized to 1W 5.30 Wkg t 16.5 o/o(k=2) and calculations were Temperature Conductivity Nominal Body TSL parameters Measured Body TSL parameters Body TSL temperature change during test SAR averaged over t cm3 11 g) of BodyTSL SAR measured 250 mW input power SAR for nominal Body TSL parameters normalized to 1W 8.57 Wkg +17.O"/"(k=2) SAR averaged over 10 cm3 (10 g) of Body TSLcondition SAR measured 250 mW input power SAR for nominal Body TSL parameters normalized to 1W Page 3 of 8 Appendix (Additional assessments outside the scope of scs olog) Antenna Parameters with Head TSL lmpedance, transformed to feed point 53.0e)-2.5jO Return Loss Antenna Parameters with Body TSL lmpedance, transformed to feed point 48.7O-3.2j() Return Loss General Antenna Parameters and Design Electrical Delay (one direction) After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding l…

Text truncated - open the document above for the full version.

Schnrd & Partner Errgineering AG Zer:ghausstrasse 43, 8004 Zurrch, Switzerlanci Phone +41 442459100. Fax +41 442459719 [email protected], http :rwvrw. speag.conr USAGE OF THE DAE 4 The DAE unit is a delicate, high precision instrument and requires careful treatment by the user. There are no serviceable parts inside the DAE. Special attention shall be given to the following points: Battery Exchange: The battery cover of the DAE4 unit is closed using a screw, over tightening the 6crew may cause the threads inside the DAE to wear out. Shipping of the DAE: Before shipping the DAE to SPEAG for calibration, remove the batteries and pack the DAE in an antistatic bag. This antistatic bag shall then be packed into a larger box or container which protects the DAE from impacts during transportation, The package shall be marked to indicate that a fragile instrument is inside. E-Stop Failures Touch detection may be malfunctioning due to broken magnets in the E-stop. Rough handling of the E-stop may lead to damage of these magnets. Touch and collision errors are often caused by dust and dirt accumulated in the E-stop. To prevent E-stop failure, the customer shall always mount the probe to the DAE carefully and keep the DAE unit in a non-dusty environment if not used for measurements. Repair: Minor repairs are performed at no extra cost during the annual calibration. However, SPEAG reserves the right to charge for any repair especially if rough unprofessional handling caused the defect. DASY Configuration Files: Since the exact values of the DAE input resistances,. as measured during the calibration procedure of a DAE unit, are not used by the DASY software, a nominal value of 200 MOhm is given in the corresponding configuration file. lmportant Note: Never attempt to grease or oil the E-stop assembly. Cleaning and readjusting of the E- stop assembly is allowed by certified SPEAG personnel only and is part of the annual cal i bration procedure. lmportant Note: To prevent damage of the DAE probe connector pins, use great care when installing the probe to the DAE. Carefully connect the probe with the connector notch oriented in the mating position. Avoid any rotational movement of the probe body versus the DAE while turning the locking nut of the connector. The same care shall be used when disconnecting the probe from the DAE. Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland Accredited by the Swiss Accreditation Service (SAS) The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates crient Sporton GN (Auden) Catibration procedure(s) QA CAL-06.v29 calibration procedure for the data acquisition electronics (DAE) This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (Sl). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory tacility: environment temperature (22 l=3)"C and humidity < 7OZ. Calibration Equipment used (M&TE critical for calibration) Primarv Standards lro+ Cal Date (Certificate No.) 06-Jan-15 (in house check) 06-Jan-15 (in house check) ln house check: Jan-16 ln house check: Jan-16 Name Dominique Steffen Fin Bomholt Function Technician Deputy Technical Manager Signature This calibration certificate shall not be reproduced except in full without written approval of the laboratory. lssued: May 21,2015 Page 1 of 5 Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland Accredited by the Swiss Accreditation Service (SAS) The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary DAE data acquisition electronics Connector angle information used in DASY system to align probe sensor X to the robot coordinate system. Methods Applied and lnterpretation of Parameters . DC Vottage Measurement: Calibration Factor assessed for use in DASY system by comparison with a calibrated instrument traceable to national standards. The figure given corresponds to the full scale range of the voltmeter in the respective range. . Connector angle: The angle of the connector is assessed measuring the angle mechanically by a tool inserted. Uncertainty is not required. o The following parameters as documented in the Appendix contain technical information as a result from the performance test and require no uncertainty. . DC Vottage Measurement Linearity: Verification of the Linearity at +10% and -1O"/" ol the nominal calibration voltage. lnfluence of offset voltage is included in this measurement. . Common mode sensitivity: lnfluence of a positive or negative common mode voltage on the differential measurement. . Channel separation; lnfluence of a voltage on the neighbor channels not subject to an input voltage. . AD Converter Values with inputs shorted: Values on the internal AD convefter corresponding to zero input voltage . lnput Offset Measuremenf Output voltage and statistical results over a large number of zero voltage measurements. . lnput Offset Current: Typical value for information; Maximum channel input offset current, not considering the input resistance. . lnput resistance; Typical value for information: DAE input resistance at the connector, during internal auto-zeroing and during measurement. . Low Battery Alarm Vottage: Typical value for information. Below this voltage, a'battery alarm signal is generated. c Power consumption:Typical value for information. Supply currents in v…

Text truncated - open the document above for the full version.