SRQ-ZM5202WCDMA Wireless Data Terminal

Hardware Development Guide of Module Product All Rights reserved, No Spreading abroad without Permission of ZTEWelink I Hardware Development Guide of Module Product Product Model No:ZM5202 Document Version: 2.0 Release Date: 2013- 05-31 Hardware Development Guide of Module Product II All Rights reserved, No Spreading abroad without Permission of ZTEWelink Legal Information By accepting this certain document of Shenzhen ZTEWelink Technology CO., LTD. (hereinafter referred to as “ZTEWelink”) you agree to the following terms. If you do not agree to the following terms, please notice that you are not allowed to use this document. The copyright of this document belongs to Shenzhen ZTEWelink Technology CO., LTD. Any rights not expressly granted herein are reserved. This document contains the proprietary information of ZTEWelink. Any reproduction, transfer, distribution, use, or disclosure of this document or any picture, form, data or other information contained in this document, in any form by any means, without the prior written consent of ZTEWelink is prohibited. And are the registered trademarks of ZTE. is the registered trademark of ZTEWelink. ZTEWelink is the wholly owned subsidiary of ZTE and is authorized by the use of the registered trademark of ZTE. ZTE’s company product name, logo, and product names referenced herein are either trademarks or registered trademarks of ZTE. Other product and company names mentioned herein may the trademarks or registered trade names of their respective owners. Without the prior written consent of ZTEWelink or the third party owner thereof, anyone’s access to this document should not be construed as granting, by implication, estopped or otherwise, any license or right to use any marks appearing in this document. The design of this product complies with the requirements of environmental protection and personal security. This product shall be s tored, used or discarded in accordance with product manual, relevant contract or laws and regulations in the relevant country (countries). Information contained in this document is subject to continuous update and modify without further notice due to improvement and update of ZTEWelink’s products and technologies. At the same time, ZTEWelink reserves the right to revise and recover this manual at any time. If there are any unknown words in the user manual, please consult the company or agents, distributor in a timely manner. Hardware Development Guide of Module Product All Rights reserved, No Spreading abroad without Permission of ZTEWelink III Revision History Version Date Description 1.0 2010-04- 15 1 st version 2.0 2013-03- 20 1. Delete the part of 3.13 and 3.14 in former version 2. C hange Logo of the header, footer and front cover 3. Modify the legal information 2013-05- 13 4. Modify the Reference document list in chapter 1.3 5. Add the module dimensions of top plane and thickness 6. Modify the chapter 7.7 of Recommended Product Upgrading Plan 7. Modify the Standby current from 3.5mA to 5mA in Table 2-1 8. Modify the peak current from ≤470mA to ≤2A and modify the Working temperature from 70 to 75°C in Table 2-1 9. Modify the Pin 32- 35,64,65,67,68 and description in chapter 3.1.3 10. Modify chapter 3.8.3 to support of 8 wire UART 11. Modify the MODULE_WAKEUP_AP interface application 12. Modify the product test environment in Table 6-2 and 6-4 13. Modify the product test result in Table 6-6 14. Update the Figure 3-1 of PIN Configuration Diagram Modify the Figure 7-2 of Main and AGPS Antenna Welding Pad Interface 15. Modify the Figure 7-1 of Main Antenna RF Connector Interface 16. Modify Figure 2-1 of Product Illustration 2013-05- 31 17. Release as Version 2.0 Hardware Development Guide of Module Product IV All Rights reserved, No Spreading abroad without Permission of ZTEWelink TABLE OF CONTENTS 1 About This Document ..................................................................................... 1 1.1 Application Range ............................................................................................................ 1 1.2 Purpose ............................................................................................................................ 1 1.3 Supported & Reference Document List ........................................................................... 1 1.4 Abbreviations ................................................................................................................... 2 2 Product Overview ............................................................................................ 3 2.1 Mechanic Features .......................................................................................................... 3 2.2 Technical Parameters ...................................................................................................... 5 2.3 Function Overview ........................................................................................................... 8 2.3.1 Baseband Function .......................................................................................................... 8 2.3.2 Radio Frequency Function ............................................................................................... 8 3 Interfaces ....................................................................................................... 10 3.1 Definition of PINs ........................................................................................................... 10 3.1.1 Definition of PIN I/O Parameters .................................................................................... 10 3.1.2 PIN Configuration Diagram ............................................................................................ 10 3.1.3 PIN Description .............................................................................................................. 11 3.2 Working Condition .....................................................................................…

Text truncated - open the document above for the full version.

Rev. 1/1/03 ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park, Nanshan District,Shenzhen, Guangdong, 518057, P.R.China Date: August 5, 2013 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: SRQ-ZM5202 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Schematics Block Diagram Parts List Operation Description Tune up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Contact Person: Min Zhang Company: ZTE CORPORATION TEL: +86-21-68897541 FAX: +86-21-68891070 E-mail: [email protected]

ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park, Nanshan District,Shenzhen, Guangdong, 518057, P.R.China Tel: +86-21-68897541 ; Fax: +86-21-68891070 Date: August 5, 2013 Power of Attorney To whom it may concern, Please be notified that I, Min Zhang, have designated Michael Lin in Sporton International Inc. as the persons being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Michael Lin in Sporton International Inc. and Gong Bolin in ZTE CORPORATION on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). This authorization is limited to the product of as following: FCC ID: SRQ-ZM5202 If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely yours, Contact Person: Min Zhang Company: ZTE CORPORATION TEL: +86-21-68897541 FAX: +86-21-68891070 E-mail: [email protected]

Applicant/Grantee ZTE CORPORATION/ZTE FCC ID: SRQ-ZM5202 Section 15.212 Modular Transmitters Request for Modular Approval Request for Limited Modular Approval Requirements EUT Conditions Comply (Y/N) Single Modular Approval Requirements 1 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The radio portion of this module has been shielded, please see exhibition external photos. Y 2 The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Buffered data inputs stage has been integrated in chip QSC6240 Y 3 The modular transmitter must have its own power supply regulation. The part number of the power regulator is QSC6240. Please see the schem.pdf Y 4 The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. The requirements of antenna connector and spurious emission have been fulfilled, please refer to the Test Report exhibition. Y 5 The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting Please refer to the Setup Photo exhibition for the stand-alone test configuration. Y equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i)). 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. (A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. (B) If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. The GSM/GPRS/EGPRS+WCDMA Module will be labeled with its own FCC ID, and the instruction on the labeling rule of the end product has been stated in the User Manual of this module. Please refer to the Label and User Manual exhibition. Y 7 The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. The required FCC rule has been fulfilled and all the instructions for maintaining compliance have been clearly stated in the User Manual. Y 8 The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Please refer exhibition RF Exposure for the compliance of MPE RF exposure rule. Y Min Zhang

1/1 ZTE CORPORATION Date: August 5, 2013 Federal Communications Commission Authorization and Evaluation Division RE : Certification Application FCC ID : SRQ-ZM5202 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days:  External Photos  Internal Photos  Test set-up photos  Users Manual The application contains technical information, which ZTE CORPORATION deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, Contact Person: Min Zhang Company: ZTE CORPORATION TEL: +86-21-68897541 FAX: +86-21-68891070 E-mail: [email protected]

Photographs of EUT Report No.: EP371503 Brand Name: ZTE; Model Name: ZM5202 SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 1 of 7 TEL : 86-755- 3320-2398 Report Issued Date : Aug. 06, 2013 FCC ID : SRQ-ZM5202 Report Version : Rev. 01 1. External Photograph of EUT Photographs of EUT Report No.: EP371503 Brand Name: ZTE; Model Name: ZM5202 SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 2 of 7 TEL : 86-755- 3320-2398 Report Issued Date : Aug. 06, 2013 FCC ID : SRQ-ZM5202 Report Version : Rev. 01 Photographs of EUT Report No.: EP371503 Brand Name: ZTE; Model Name: ZM5202 SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 3 of 7 TEL : 86-755- 3320-2398 Report Issued Date : Aug. 06, 2013 FCC ID : SRQ-ZM5202 Report Version : Rev. 01 Photographs of EUT Report No.: EP371503 Brand Name: ZTE; Model Name: ZM5202 SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 4 of 7 TEL : 86-755- 3320-2398 Report Issued Date : Aug. 06, 2013 FCC ID : SRQ-ZM5202 Report Version : Rev. 01

Photographs of EUT Report No.: EP371503 Brand Name: ZTE; Model Name: ZM5202 SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 5 of 7 TEL : 86-755- 3320-2398 Report Issued Date : Aug. 06, 2013 FCC ID : SRQ-ZM5202 Report Version : Rev. 01 2. Internal Photograph of EUT Photographs of EUT Report No.: EP371503 Brand Name: ZTE; Model Name: ZM5202 SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 6 of 7 TEL : 86-755- 3320-2398 Report Issued Date : Aug. 06, 2013 FCC ID : SRQ-ZM5202 Report Version : Rev. 01 Photographs of EUT Report No.: EP371503 Brand Name: ZTE; Model Name: ZM5202 SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 7 of 7 TEL : 86-755- 3320-2398 Report Issued Date : Aug. 06, 2013 FCC ID : SRQ-ZM5202 Report Version : Rev. 01

SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 1 of 9 TEL : 86-755-8637-9589 Report Issued Date : Aug. 06, 2013 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : SRQ-ZM5202 RF Exposure Evaluation Report Report No. : FA371503 RF Exposure Evaluation Report APPLICANT : ZTE CORPORATION EQUIPMENT : WCDMA Wireless Data Terminal BRAND NAME : ZTE MODEL NAME : ZM5202 FCC ID : SRQ-ZM5202 FILING TYPE : Certification STANDARD : 47 CFR Part 2.1091 We, SPORTON INTERNATIONAL (SHENZHEN) INC., would like to declare that the device has been evaluated in accordance with 47 CFR Part 2.1091, and pass the limit. Without written approval of SPORTON INTERNATIONAL (SHENZHEN) INC., the test report shall not be reproduced except in full. SPORTON INTERNATIONAL (SHENZHEN) INC. No. 101, Complex Building C, Guanlong Village, Xili Town, Nanshan District, Shenzhen, Guangdong, P.R.C. Approved by: Jones Tsai / Manager Reviewed by: Eric Huang / Deputy Manager SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 2 of 9 TEL : 86-755-8637-9589 Report Issued Date : Aug. 06, 2013 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : SRQ-ZM5202 RF Exposure Evaluation Report Report No. : FA371503 Table of Contents 1. ADMINISTRATION DATA ........................................................................................................................... 4 1.1. Testing Laboratory ............................................................................................................................. 4 1.2. Applicant ............................................................................................................................................ 4 1.3. Manufacturer ...................................................................................................................................... 4 2. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 5 3. MAXIMUM RF AVERAGE OUTPUT POWER AMONG PRODUCTION UNITS ........................................ 6 4. CONDUCTED RF OUTPUT POWER (UNIT: DBM) .................................................................................... 7 5. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 8 6. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 9 SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 3 of 9 TEL : 86-755-8637-9589 Report Issued Date : Aug. 06, 2013 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : SRQ-ZM5202 RF Exposure Evaluation Report Report No. : FA371503 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA371503 Rev. 01 Initial issue of report Aug. 06, 2013 SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 4 of 9 TEL : 86-755-8637-9589 Report Issued Date : Aug. 06, 2013 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : SRQ-ZM5202 RF Exposure Evaluation Report Report No. : FA371503 1. Administration Data 1.1. Testing Laboratory Test Site SPORTON INTERNATIONAL (SHENZHEN) INC. Test Site Location No. 101, Complex Building C, Guanlong Village, Xili Town, Nanshan District, Shenzhen, Guangdong, P.R.C. TEL: +86-755-8637-9589 FAX: +86-755-8637-9595 1.2. Applicant Company Name ZTE CORPORATION Address ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, P.R.China 1.3. Manufacturer Company Name ZTE CORPORATION Address ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, P.R.China SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 5 of 9 TEL : 86-755-8637-9589 Report Issued Date : Aug. 06, 2013 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : SRQ-ZM5202 RF Exposure Evaluation Report Report No. : FA371503 2. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type WCDMA Wireless Data Terminal Brand Name ZTE Model Name ZM5202 FCC ID SRQ-ZM5202 Wireless Technology and Frequency Range GPRS850: 824.2 MHz ~ 848.8 MHz GPRS1900: 1850.2 MHz ~ 1909.8 MHz WCDMA Band V: 826.4 MHz ~ 846.6 MHz WCDMA Band II: 1852.4 MHz ~ 1907.6 MHz Mode ‧GPRS/EGPRS ‧UMTS Rel 99 Antenna Type Fixed External Antenna HW Version ZM5202-2.0.0 SW Version BD_ZM5202V1.0.0B04 EUT Stage Identical Prototype Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 6 of 9 TEL : 86-755-8637-9589 Report Issued Date : Aug. 06, 2013 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : SRQ-ZM5202 RF Exposure Evaluation Report Report No. : FA371503 3. Maximum RF average output power among production units Maximum Target Burst Average Power for Production Unit Mode / Band GSM 850 GSM 1900 GSM/GPRS 35 32 EDGE 30 29 Maximum Target Power for Production Unit Mode / Band WCDMA Band V WCDMA Band II RMC 12.2K 25 25 SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 7 of 9 TEL : 86-755-8637-9589 Report Issued Date : Aug. 06, 2013 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : SRQ-ZM5202 RF Exposure Evaluation Report Report No. : FA371503 4. Conducted RF Output Power (Unit: dBm) <GSM Conducted Power> Band: GSM850 Burst Average Power (dBm) Frame-Average Power (dBm) Channel 128 189 251 128 189 251 Frequency (MHz) 824.2 836.4 848.8 824.2 836.4 848.8 GPRS (GMSK, 1 Tx slot) – CS1 31.06 30.95 30.93 22.06 21.95 21.93 GPRS (GMSK, 2 Tx slots) – CS1 29.49 29.39 29.38 23.49 23.39 23.38 EDGE (8PSK, 1 Tx slot) – MCS5 25.58 25.49 25.43 16.58 16.49 16.43 EDGE (8PSK, 2 Tx slots) – MCS5 23.57 23.47 23.46 17.57 17.47 17.46 EDGE (8PSK, 3 Tx slots) – MCS5 21.70 21.59 21.61 17.44 17.33 17.35 EDGE (8PSK, 4 Tx slots) – MCS5 25.08 25.00 24.97 22.08 22.00 21.97 Remark: The frame-averaged power is linearly scaled the maximum burst averaged power over 8 time slots. The calculated method are shown as below: Frame-averaged power = Maximum burs…

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 1 of 98 TEL : 86-755- 3320-2398 Report Issued Date : Aug. 06, 2013 FCC ID : SRQ-ZM5202 Report Version : Rev. 01 FCC RF Test Report Report No. : FG371503 FCC RF Test Report APPLICANT : ZTE CORPORATION EQUIPMENT : WCDMA Wireless Data Terminal BRAND NAME : ZTE MODEL NAME : ZM5202 FCC ID : SRQ-ZM5202 STANDARD : FCC 47 CFR Part 2, 22(H), 24(E) CLASSIFICATION : PCS Licensed Transmitter (PCB) The product was received on Jul. 15, 2013 and completely tested on Jul. 25, 2013. We, SPORTON INTERNATIONAL (SHENZHEN) INC., would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI / TIA / EIA-603-C-2004 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL (SHENZHEN) INC., the test report shall not be reproduced except in full. Reviewed by: Joseph Lin / Supervisor Approved by: Jones Tsai / Manager SPORTON INTERNATIONAL (SHENZHEN) INC. No. 3 Building, the third floor of south, Shahe River west, Fengzeyuan warehouse, Nanshan District, Shenzhen, Guangdong, P.R.C. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 2 of 98 TEL : 86-755- 3320-2398 Report Issued Date : Aug. 06, 2013 FCC ID : SRQ-ZM5202 Report Version : Rev. 01 FCC RF Test Report Report No. : FG371503 TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Manufacturer ..................................................................................................................................... 5 1.3 Feature of Equipment Under Test ..................................................................................................... 5 1.4 Product Specification of Equipment Under Test ............................................................................... 6 1.5 Modification of EUT ........................................................................................................................... 6 1.6 Maximum ERP/EIRP Power, Frequency Tolerance, and Emission Designator ............................... 6 1.7 Testing Site ....................................................................................................................................... 7 1.8 Applied Standards ............................................................................................................................. 7 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 8 2.1 Test Mode.......................................................................................................................................... 8 2.2 Connection Diagram of Test System .............................................................................................. 10 2.3 Support Unit used in test configuration and system ........................................................................ 10 2.4 Measurement Results Explanation Example .................................................................................. 10 3 TEST RESULT ........................................................................................................................................... 11 3.1 Conducted Output Power Measurement ......................................................................................... 11 3.2 Peak-to-Average Ratio .................................................................................................................... 13 3.3 Effective Radiated Power and Effective Isotropic Radiated Power Measurement ......................... 21 3.4 99% Occupied Bandwidth and 26dB Bandwidth Measurement...................................................... 27 3.5 Band Edge Measurement ................................................................................................................ 47 3.6 Conducted Spurious Emission Measurement ................................................................................. 60 3.7 Field Strength of Spurious Radiation Measurement ....................................................................... 76 3.8 Frequency Stability Measurement ................................................................................................... 90 4 LIST OF MEASURING EQUIPMENT ........................................................................................................ 97 5 UNCERTAINTY OF EVALUATION ........................................................................................................... 98 APPENDIX A. SETUP PHOTOGRAPHS SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 3 of 98 TEL : 86-755- 3320-2398 Report Issued Date : Aug. 06, 2013 FCC ID : SRQ-ZM5202 Report Version : Rev. 01 FCC RF Test Report Report No. : FG371503 REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FG371503 Rev. 01 Initial issue of report Aug. 06, 2013 SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 4 of 98 TEL : 86-755- 3320-2398 Report Issued Date : Aug. 06, 2013 FCC ID : SRQ-ZM5202 Report Version : Rev. 01 FCC RF Test Report Report No. : FG371503 SUMMARY OF TEST RESULT Report Section FCC Rule Description Limit Result Remark 3.1 §2.1046 Conducted Output Power N/A PASS - 3.2 §24.232(d) Peak-to-Average Ratio < 13 dB PASS - 3.3 §22.913(a)(2) Effective Radiated Power < 7 Watts PASS - 3.3 §24.232(c) Equivalent Isotropic Radia…

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : A1 of A1 TEL : 86-755- 3320-2398 Report Issued Date : Aug. 06, 2013 FCC ID : SRQ-ZM5202 Report Version : Rev. 01 FCC RF Test Report Report No. : FG371503 Appendix A. Setup Photographs <Radiated Emission> LF HF