SRQ-ZTEA320201LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone

ZTE Blade A3 2020 Quick Start Guide The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: SRQ-ZTEA320201. The FCC ID also can be found on the device when you open Settings > System > About phone. For this device, the highest reported SAR value for usage against the head is 0.648 W/kg, and for usage near the body is 0.941W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 15 mm between the unit and the human body. Carry this device at least 15 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 15 mm between this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and using such body-worn accessory should be avoided. 12 LEGAL INFORMATION Copyright © 2020 ZTE CORPORATION. All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. Notice ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice. We offer self-service for our smart terminal device users. Please visit the ZTE official website (at www.ztedevices.com) for more information on self- service and supported product models. Information on the website takes precedence. Disclaimer ZTE Corporation expressly disclaims any liability for faults and damages caused by unauthorized modifications of the software. Images and screenshots used in this guide may differ from the actual product. Content in this guide may differ from the actual product or software. FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 1 13 Trademarks ZTE and the ZTE logos are trademarks of ZTE Corporation. Android™ is a trademark of Google LLC. The Bluetooth ® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by ZTE Corporation is under license. microSDXC Logo is a trademark of SD-3C, LLC. Other trademarks and trade names are those of their respective owners. Version No.: R1.0 Edition Time : December 26, 2019 Manual No.: CAUTION: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Distractions Driving Full attention must be given to driving at all times in order to reduce the risk of an accident. Using a phone while driving (even with a hands-free kit) can cause distraction and lead to an accident. You must comply with local laws and regulations restricting the use of wireless devices while driving. Operating Machinery Full attention must be given to operating the machinery in order to reduce the risk of an accident. Product Handling General Statement on Handling and Use You alone are responsible for how you use your phone and any consequences of its use. You must always switch off your phone wherever the use of a phone is prohibited. Use of your phone is subject to safety measures designed to protect users and their environment. • Always treat your phone and its accessories with care and keep them in a clean place. 2 14 Getting to Know Your Phone Front camera Indicator light Volume key Power key Headset jack Back cover Charging/ micro-USB jack Earpiece/ Speaker Touch screen Back camera Flash • Keep the screen and camera lens clean. An unclean screen or camera lens may slow down the phone's reaction to your operations or interfere with the image quality. • Clean your phone and its accessories with a soft material such as cleaning cloth for eyeglass lenses. Do not use alcohol or other corrosive substances for cleaning or allow them to get inside. • Do not expose your phone or its accessories to open flames or lit tobacco products. • Do not expose your phone or its accessories to liquid, moisture or high humidity. • Do not drop, throw or try to bend your phone or its accessories. • Do not use…

Text truncated - open the document above for the full version.

Agent Authorization Letter 2020-03-10 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize CCIC Southern Electronic Product Testing (Shenzhen) Co., Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name/title: Yu Gong/Certification Manager Company: ZTE Corporation Address: ZTE Plaza, Keji Road South, Shenzhen, China E-mail: [email protected] Tele: +86-21-68895397

ZTE Corporation Long Term Confidentiality Request Letter 2020-03-10 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR Product: LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone Model: ZTE Blade A3 2020 FCC ID: SRQ-ZTEA320201 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (list the items that are being requested for confidentiality here) required to be submitted with this application be permanently withheld from public review. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure SPECIFY REASON FOR REQUEST (i.e. the above documents are company proprietary information that could never get into the possession of your competition). Please contact me if there is any information you may need. Sincerely, Signature: Name/title: Yu Gong/Certification Manager Company: ZTE Corporation Address: ZTE Plaza, Keji Road South, Shenzhen, China E-mail: [email protected] Tele: +86-21-68895397

External Photo

Internal Photo LTE Sub ANT WWAN ANT BT/WIFI ANT GPS ANT

Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 1 / 21 Appendix A: SAR System performance Check Plots Measurement Liquid Frequency Test Date System Check Head 750 2020-02-19 System Check Body 750 2020-02-19 System Check Head 835 2020-02-20 System Check Body 835 2020-02-20 System Check Head 1800 2020-02-21 System Check Body 1800 2020-02-21 System Check Head 1900 2020-02-22 System Check Body 1900 2020-02-22 System Check Head 2450 2020-02-24 System Check Body 2450 2020-02-24 Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 2 / 21 System Performance Check (Head, 750MHz) Type: Phone measurement Area scan resolution: dx=8mm,dy=8mm Zoom scan resolution: dx=8mm, dy=8mm, dz=5mm Date of measurement: 02/19/2020 Measurement duration: 22 minutes 03 seconds A. Experimental conditions. Phantom File dx=8mm dy=8mm Phantom 5x5x7,dx=8mm dy=8mm dz=5mm Device Position Dipole Band 750MHz Channels Signal CW B. SAR Measurement Results Band SAR E-Field Probe SATIMO SN_41/18_EPG0330 Frequency (MHz) 750 Relative permittivity (real part) 41.88 Relative permittivity 22.56 Conductivity (S/m) 0.94 Power drift (%) -0.35 Ambient Temperature: 22.2°C Liquid Temperature: 22.6°C ConvF: 1.54 Crest factor: 1:1 SURFACE SAR VOLUME SAR Maximum location: X=0.00, Y=-11.00 SAR Peak: 0.14 W/kg SAR 10g (W/Kg) 0.055651 SAR 1g (W/Kg) 0.093661 Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 3 / 21 3D screen shot Hot spot position Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.1382 0.0985 0.0625 0.0381 0.0220 Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 4 / 21 System Performance Check (Body, 750MHz) Type: Phone measurement Area scan resolution: dx=8mm,dy=8mm Zoom scan resolution: dx=8mm, dy=8mm, dz=5mm Date of measurement: 02/19/2020 Measurement duration: 22 minutes 01 seconds A. Experimental conditions. Phantom File dx=8mm dy=8mm Phantom 5x5x7,dx=8mm dy=8mm dz=5mm Device Position Dipole Band 750MHz Channels Signal CW B. SAR Measurement Results Band SAR E-Field Probe SATIMO SN_41/18_EPG0330 Frequency (MHz) 750 Relative permittivity (real part) 55.61 Relative permittivity 23.04 Conductivity (S/m) 0.96 Power drift (%) -1.16 Ambient Temperature: 22.2°C Liquid Temperature: 22.6°C ConvF: 1.59 Crest factor: 1:1 SURFACE SAR VOLUME SAR Maximum location: X=0.00, Y=-5.00 SAR Peak: 0.14 W/kg SAR 10g (W/Kg) 0.055479 SAR 1g (W/Kg) 0.094951 Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 5 / 21 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.1417 0.1009 0.0636 0.0381 0.0213 3D screen shot Hot spot position Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 6 / 21 System Performance Check (Head, 835MHz) Type: Phone measurement Area scan resolution: dx=8mm,dy=8mm Zoom scan resolution: dx=8mm, dy=8mm, dz=5mm Date of measurement: 02/20/2020 Measurement duration: 22 minutes 09 seconds A. Experimental conditions. Phantom File dx=8mm dy=8mm Phantom 5x5x7,dx=8mm dy=8mm dz=5mm Device Position Dipole Band 835MHz Channels Signal CW B. SAR Measurement Results Band SAR E-Field Probe SATIMO SN_41/18_EPG0330 Frequency (MHz) 835 Relative permittivity (real part) 41.56 Relative permittivity 20.91 Conductivity (S/m) 0.97 Power drift (%) -1.93 Ambient Temperature: 22.2°C Liquid Temperature: 22.6°C ConvF: 1.60 Crest factor: 1:1 SURFACE SAR VOLUME SAR Maximum location: X=-9.00, Y=-5.00 SAR Peak: 0.15 W/kg SAR 10g (W/Kg) 0.056355 SAR 1g (W/Kg) 0.099016 Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 7 / 21 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.1502 0.1057 0.0652 0.0376 0.0196 3D screen shot Hot spot position Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 8 / 21 System Performance Check (Body, 835MHz) Type: Phone measurement Area scan resolution: dx=8mm,dy=8mm Zoom scan resolution: dx=8mm, dy=8mm, dz=5mm Date of measurement: 02/20/2020 Measurement duration: 22 minutes 02 seconds A. Experimental conditions. Phantom File dx=8mm dy=8mm Phantom 5x5x7,dx=8mm dy=8mm dz=5mm Device Position Dipole Band 835MHz Channels Signal CW B. SAR Measurement Results Band SAR E-Field Probe SATIMO SN_41/18_EPG0330 Frequency (MHz) 835 Relative permittivity (real part) 55.30 Relative permittivity 21.34 Conductivity (S/m) 0.99 Power drift (%) -2.69 Ambient Temperature: 22.2°C Liquid Temperature: 22.6°C ConvF: 1.64 Crest factor: 1:1 SURFACE SAR VOLUME SAR Maximum location: X=-1.00, Y=-5.00 SAR Peak: 0.15 W/kg SAR 10g (W/Kg) 0.071769 SAR 1g (W/Kg) 0.106869 Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 9 / 21 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.1483 0.1103 0.0767 0.0549 0.0409 3D screen shot Hot spot position Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 10 / 21 System Performance Check (Head, 1800MHz) Type: Validation measurement Area scan resolution: dx=8mm,dy=8mm Zoom scan resolution: dx=8mm, dy=8mm, dz=5mm Date of measurement: 02/21/2020 Measurement duration: 22 minutes 07 seconds A. Experimental conditions. Phantom File dx=8mm dy=8mm Phantom 5x5x7,dx=8mm dy=8mm dz=5mm Device Position Dipole Band 1800MHz Channels Signal CW B. SAR Measurement Results Band SAR E-Field Probe SATIMO SN_41/18_EPG0330 Frequency (MHz) 1800 Relative permittivity (real part) 40.42 Relative permittivity 13.80 Conductivity (S/m) 1.38 Power Drift (%) -1.95 Ambient Temperature: 22.1°C Liquid Temperature: 22.6°C ConvF: 1.74 Duty factor: 1:1 SURFACE SAR VOLUME SAR Maximum location: X=-8.00, Y=-5.00 SAR Peak: 0.61 W/kg SAR 10g (W/Kg) 0.204249 SAR 1g (W/Kg) 0.378897 Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 11 / 21 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.6144 0.4039 0.2349 0.1384 0.0854 3D screen shot Hot spot position Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 12 / 21 System Performance Check (Body, 1800MHz) Type: Validation measurement Area scan resolution: dx=8mm,dy=8mm Zoom scan resolution: dx=8mm, dy=8mm, dz=5mm Date of measurement: 02/21/2020 Measurement duration: 22 minutes 04 seconds A. Experimental conditions. Phantom File dx=8mm dy=8mm Phantom 5x5x7,dx=8mm dy=8mm dz=5mm Device Position Dipole Band …

Text truncated - open the document above for the full version.

Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 1 / 45 Appendix B: SAR Measurement results Plots Plot Frequency/Mode Testing Position and Channel Test Date 1 GSM850 Right Cheek Middle 2020/02/20 2 GSM850/GPRS4Tx Body Back, Middle ,10mm 2020/02/20 3 GSM1900 Left Cheek Middle 2020/02/22 4 GSM1900/GPRS4Tx Body Back, Middle ,10mm 2020/02/22 5 WCDMA1900 Left Cheek Middle 2020/02/22 6 WCDMA1900 Body Back, Middle ,10mm 2020/02/22 7 WCDMA850 Left Cheek Middle 2020/02/20 8 WCDMA850 Body Back, Middle ,10mm 2020/02/20 9 LTE Band2 Left Cheek Middle 2020/02/22 10 LTE Band2 Body Back, Middle ,10mm 2020/02/22 11 LTE Band4 Left Cheek Middle 2020/02/21 12 LTE Band4 Body Back, Middle ,10mm 2020/02/21 13 LTE Band5 Right Cheek Middle 2020/02/20 14 LTE Band5 Body Back, Middle ,10mm 2020/02/20 15 LTE Band12 Right Cheek Middle 2020/02/19 16 LTE Band12 Body Back, Middle ,10mm 2020/02/19 17 LTE Band13 Right Cheek Middle 2020/02/19 18 LTE Band13 Body Back, Middle ,10mm 2020/02/19 19 LTE Band17 Right Cheek Middle 2020/02/19 20 LTE Band17 Body Back, Middle ,10mm 2020/02/19 21 WIFI 2.4G 802.11b Left Cheek Middle 2020/02/24 22 WIFI 2.4G 802.11b Body Back, Middle ,10mm 2020/02/24 23 24 25 35 36 37 38 39 Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 2 / 45 Plot 1: GSM850, Right Cheek, Middle Type: Phone measurement Date of measurement: 02/20/2020 Measurement duration: 22 minutes 06 seconds Mobile Phone IMEI number: -- A. Experimental conditions. Area Scan dx=8mm dy=8mm ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Right Cheek Band GSM850 Channels 190 Signal GSM (Duty cycle: 1:8.3) B. SAR Measurement Results E-Field Probe SATIMO SN_41/18 EPGO330 Frequency (MHz) 836.6 Relative permittivity (real part) 41.56 Relative permittivity (imaginary part) 20.91 Conductivity (S/m) 0.97 Variation (%) -3.47 ConvF: 1.60 SURFACE SAR VOLUME SAR Maximum location: X=-51.00, Y=-41.00 SAR Peak: 0.56 W/kg SAR 10g (W/Kg) 0.335470 SAR 1g (W/Kg) 0.441531 Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 3 / 45 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.9035 0.4540 0.3265 0.2977 0.2157 3D screen shot Hot spot position Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 4 / 45 Plot 2: GPRS850, Back, Middle,10mm Type: Phone measurement Date of measurement: 02/20/2020 Measurement duration: 22 minutes 11 seconds Mobile Phone IMEI number: -- A. Experimental conditions. Area Scan dx=8mm dy=8mm ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Back Band GSPRS850_4Tx Channels 190 Signal GPRS(Duty cycle: 1:2) B. SAR Measurement Results E-Field Probe SATIMO SN_41/18 EPGO330 Frequency (MHz) 836.6 Relative permittivity (real part) 55.30 Relative permittivity (imaginary part) 21.34 Conductivity (S/m) 0.99 Variation (%) -2.64 ConvF: 1.64 SURFACE SAR VOLUME SAR Maximum location: X=-7.00, Y=18.00 SAR Peak: 0.78 W/kg SAR 10g (W/Kg) 0.475456 SAR 1g (W/Kg) 0.629016 Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 5 / 45 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.7766 0.6324 0.4908 0.3850 0.3058 3D screen shot Hot spot position Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 6 / 45 Plot 3: GSM1900, Left Cheek, Middle Type: Phone measurement Date of measurement: 02/22/2020 Measurement duration: 22 minutes 08 seconds Mobile Phone IMEI number: -- A. Experimental conditions. Area Scan dx=8mm dy=8mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Left Cheek Band GSM1900 Channels 661 Signal GSM (Duty cycle: 1:8.3) B. SAR Measurement Results E-Field Probe SATIMO SN_41/18 EPGO330 Frequency (MHz) 1880 Relative permittivity (real part) 40.33 Relative permittivity (imaginary part) 13.26 Conductivity (S/m) 1.40 Variation (%) -2.22 ConvF: 2.03 SURFACE SAR VOLUME SAR Maximum location: X=-63.00, Y=-63.00 SAR Peak: 0.15 W/kg SAR 10g (W/Kg) 0.062106 SAR 1g (W/Kg) 0.100249 Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 7 / 45 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.1506 0.1080 0.0715 0.0489 0.0352 3D screen shot Hot spot position Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 8 / 45 Plot 4: GPRS1900, Back, Middle ,10mm Type: Phone measurement Date of measurement: 02/22/2020 Measurement duration: 22 minutes 05 seconds Mobile Phone IMEI number: -- A. Experimental conditions. Area Scan dx=8mm dy=8mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Back Band GPRS1900_4Tx Channels 661 Signal GPRS(Duty cycle: 1:2) B. SAR Measurement Results E-Field Probe SATIMO SN_41/18 EPGO330 Frequency (MHz) 1880 Relative permittivity (real part) 53.29 Relative permittivity (imaginary part) 14.40 Conductivity (S/m) 1.52 Variation (%) -4.93 ConvF: 2.08 SURFACE SAR VOLUME SAR Maximum location: X=0.00, Y=-50.00 SAR Peak: 0.62 W/kg SAR 10g (W/Kg) 0.211182 SAR 1g (W/Kg) 0.390885 Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 9 / 45 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.6222 0.4268 0.2632 0.1640 0.1052 3D screen shot Hot spot position Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 10 / 45 Plot 5: WCDMA1900, Left Cheek, Middle,10mm Type: Phone measurement Date of measurement: 02/22/2020 Measurement duration: 22 minutes 12 seconds Mobile Phone IMEI number: -- A. Experimental conditions. Area Scan dx=8mm dy=8mm ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Left Cheek Band Band2_WCDMA1900 Channels 9400 Signal WCDMA (Duty cycle: 1:1) B. SAR Measurement Results E-Field Probe SATIMO SN_41/18 EPGO330 Frequency (MHz) 1880 Relative permittivity (real part) 40.33 Relative permittivity (imaginary 13.26 Conductivity (S/m) 1.40 Variation (%) -4.87 ConvF: 2.03 SURFACE SAR VOLUME SAR Maximum location: X=-57.00, Y=-61.00 SAR Peak: 0.37W/kg SAR 10g (W/Kg) 0.154055 SAR 1g (W/Kg) 0.251953 Report No. SET2020-01339 CCIC‐SET/TRF:ISAR(2019‐05‐23) 11 / 45 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.3732 0.2671 0.1758 0.1185 0.0832 3D screen shot Hot spot position Report No. SET2020-01339 CCIC‐S…

Text truncated - open the document above for the full version.

Report No. SET2020-01339 ANNEX C: Calibration Reports EPO330 Probe Calibration Report SID750 Dipole Calibration Report SID835 Dipole Calibration Report SID1800 Dipole Calibration Report SID1900 Dipole Calibration Report SID2450 Dipole Calibration Report Report No. SET2020-01339 Epo3301 Probe Calibration Report Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 SID750Dipole Calibration Report Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 SID835 Dipole Calibration Report Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 SID1800 Dipole Calibration Report Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 SID1900 Dipole Calibration Report Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339 Report No. SET2020-01339

Report No. SET2019-16822 CCIC-SET/TRF:ISAR(2019-05-23) 1 / 3 Appendix D: SAR Test Setup Photo 1: Measurement System SATIMO Photo 2: Liquid deep(15cm) Photo 3: Left Cheek Photo 4: Left Tilt 15° Photo 5: Right Cheek Photo 6: Right Tilt 15° Report No. SET2019-16822 CCIC-SET/TRF:ISAR(2019-05-23) 2 / 3 Photo 7: Face Upward 15mm Photo 8: Back Upward 15mm Photo 9: Face Upward 10mm Photo 10: Back Upward 10mm Photo 11: Edge A 10mm Photo 12: Edge B 10mm Report No. SET2019-16822 CCIC-SET/TRF:ISAR(2019-05-23) 3 / 3 Photo 13: Edge C 10mm Photo 14: Edge D 10mm EUT Front View EUT Back View

Report No. SET2020-01263 CCIC-SET/TRF:ISAR(2019-05-23) Page 1 of 58 FCC SAR TEST REPORT Report No.： SET2020-01263 Product： LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone Tra d e Na me: ZTE Model No.： ZTE Blade A3 2020 FCC ID： SRQ-ZTEA320201 Applicant： ZTE CORPORATION Address： ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park,Nanshan District,Shenzhen, Guangdong, 518057, P.R.China Issued by： CCIC Southern Testing Co., Ltd Lab Location： Electronic Testing Building, No. 43 Shahe Road Xili Street, Nanshan District，Shenzhen, Guangdong 518055，China Te l： 86 755 26627338 Fax：86 755 26627238 Mail： [email protected] Website：http://www.ccic-set.com This test report consists of 58 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CCIC-SET. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CCIC-SET within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. Report No. SET2020-01263 CCIC-SET/TRF:ISAR(2019-05-23) Page 2 of 58 Te s t R e p o r t Product. ...................: LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone Model No. .................: ZTE Blade A3 2020 Brand Name..............: ZTE FCC ID.......................: SRQ-ZTEA320201 Applicant....................: ZTE CORPORATION Applicant Address.......: ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park,Nanshan District,Shenzhen, Guangdong, 518057, P.R.China Manufacturer............: ZTE CORPORATION Manufacturer Address: ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park,Nanshan District,Shenzhen, Guangdong, 518057, P.R.China Test Standards..........: 47CFR §2.1093- Radiofrequency Radiation Exposure Evaluation: Portable Devices; ANSI C95.1–1992: Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz – 300 GHz.( IEEE Std C95.1-1991) IEEE 1528–2013: IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques Test Result...............: Pass Test Date..................: 2020.2.19-2020.2.24 Tested by ..............: 2020-03-06 Mei Chun, Test Engineer Reviewed by.............: 2020-03-06 Chris You, Senior Engineer Approved by...............: 2020-03-06 Shuangwen Zhang, Manager Report No. SET2020-01263 CCIC-SET/TRF:ISAR(2019-05-23) Page 3 of 58 Contents Test Report ........................................................................................................................................... 2 1. Administrative Data ......................................................................................................................... 4 2. Equipment Under Test (EUT) .......................................................................................................... 5 3. SAR Summary ................................................................................................................................. 7 4. Specific Absorption Rate (SAR) ...................................................................................................... 9 5. Tissue check and recommend Dielectric Parameters ..................................................................... 13 6. SAR measurement procedure......................................................................................................... 18 7. Conducted RF Output Power ......................................................................................................... 19 8. SAR test Exclusion and estimate SAR calculation: ....................................................................... 35 9. Scaling Factor calculation .............................................................................................................. 38 10. Test Results .................................................................................................................................. 40 11. Simultaneous Transmissions Analysis ......................................................................................... 51 12. Measurement Uncertainty ............................................................................................................ 53 13. Equipment List ............................................................................................................................. 57 ANNEX A: Appendix A: SAR System performance Check Plots..................................................... 58 ANNEX B: Appendix B: SAR Measurement results Plots................................................................ 58 ANNEX C: Appendix C: Calibration reports .................................................................................... 58 ANNEX D: Appendix D: SAR Test Setup ......................................................................................... 58 Report No. SET2020-01263 CCIC-SET/TRF:ISAR(2019-05-23) Page 4 of 58 1. Administrative Data 1.1 Testing Laboratory Te s t S i t e : CCIC Southern Testing Co., Ltd Address: Electronic Testing Building, No. 43 Shahe Road Xili Street, Nanshan District，Shenzhen, Guangdong 518055，China CNAS Lab Code: CCIC-SET is a third party testing organization accredited by China National Accreditation Service for Conformity Assessment (CNAS) according to ISO/IEC 17025. The accreditation certificate number is L1659. NVLAP Lab Code: CCIC-SET is a third party testing organization accredited by NVLAP according to ISO/IEC 17025. The accreditation certificate number is 201008. FCC Registration: CCIC-SET . EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptanc…

Text truncated - open the document above for the full version.

Report No.: SET2020-01327 CCIC-SET/ TRF:IRF(2019-05-23) Page 1 of 66 RF TEST REPORT Report No.: SET2020-01327 Product Name: LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone FCC ID: SRQ-ZTEA320201 Model No. : ZTE Blade A3 2020 Marketing Name: ZTE Blade A3 2020, Blade A3 2020 Applicant: ZTE Corporation. Address: ZTE Plaza, Keji Road South, Shenzhen, China. Dates of Testing: 02/10/2020 —03/05/2020 Issued by: CCIC Southern Testing Co., Ltd. Lab Location: Electronic Testing Building, No. 43 Shahe Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China. Tel：86 755 26627338 Fax：86 755 26627238 This test report consists of 66 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CCIC-SET. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CCIC-SET within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. Report No.: SET2020-01327 CCIC-SET/ TRF:IRF(2019-05-23) Page 2 of 66 Test Report Product.........................: LTE/WCDMA/GSM(GPRS)Multi-Mode Digital Mobile Phone Brand Name..................: ZTE Trade Name...................: ZTE Applicant......................: ZTE Corporation. Applicant Address.........: ZTE Plaza, Keji Road South, Shenzhen, China. Manufacturer.................: ZTE Corporation. Manufacturer Address....: ZTE Plaza, Keji Road South, Shenzhen, China. Test Standards..............: 47 CFR FCC Part …

Text truncated - open the document above for the full version.