SRQ-ZTG015G NR Multi model smart phone

1 ZTG01 User Guide 2 About This Guide Thank you for choosing this ZTE mobile device. In order to keep your device in its best condition, please read this guide and keep it for future reference. Copyright Copyright © 2020 ZTE CORPORATION All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. Notice ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice. This manual has been designed with the utmost care to ensure the accuracy of its content. However, all statements, information and recommendations contained therein do not constitute a warranty of any kind, either expressed or implied. We offer self-service for our smart terminal device users. Please visit the ZTE official website (at http://www.ztedevices.com ) for more information on self-service and supported product models. Information on the website takes precedence. 3 Disclaimer ZTE Corporation expressly disclaims any liability for faults and damages caused by unauthorized modifications of the software. Images and screenshots used in this manual may differ from the actual product. Content in this manual may differ from the actual product or software. Trademarks ZTE and the ZTE logos are trademarks of ZTE Corporation. Android™ is a trademark of Google LLC. The Bluetooth ® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by ZTE Corporation is under license. microSDXC Logo is a trademark of SD-3C, LLC. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together, DTS:X, the DTS:X logo, and DTS:X Ultra are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved. 4 Other trademarks and trade names are those of their respective owners. Version No.: R1.0 Edition Time: April 20, 2020 5 Getting to Know Your Phone nano-SIM/ microSDXC card tray Light & proximity sensor Front camera Volume ke y Touch screen Indicator light Power key Speaker Headset jack Earpiece 6 Back cameras Fingerprint sensor USB Type-C jack Flash Microphone 7 Setting Up Your Phone The nano-SIM card can be installed or removed while the phone is turned on. WARNING! To avoid damage to the phone, do not use any other kind of SIM cards, or any non-standard nano-SIM card cut from a SIM card. You can get a standard nano-SIM card from your service provider. 1. Insert the tip of the tray eject tool into the hole on the card tray. 8 2. Pull out the card tray. You can place a nano-SIM card and a microSDXC card (optional) on the tray, as shown. Carefully slide the tray back into place. Charging the Phone Your phone’s battery should have enough power for the phone to turn on, find a signal, and make a few calls. You should fully charge the battery as soon as possible. WARNING! Use only ZTE-approved chargers and USB Type-C cables. The use of unapproved accessories could damage your phone or cause the battery to explode. nano-SIM card microSDXC card 9 WARNING! Do not remove the back cover. The battery is not removable. Removal may cause fire or explosion. 1. Connect the adapter to the charging jack. 2. Connect the charger to a standard AC power outlet. If the phone is on, you’ll see a charging icon appear on the status bar. 3. Disconnect the charger when the battery is fully charged. NOTE: If the battery is extremely low, you may be unable to power on the phone even when it is being charged. In this case, try again after charging the phone for at least 20 minutes. Contact the customer service if you still cannot power on the phone after prolonged charging. 10 For Your Safety General Safety Don’t make or receive handheld calls while driving. Never text while driving. Don’t use at petrol stations. Keep your phone at least 5 mm away from your body while making calls. Your phone may produce a bright or flashing light. Small parts may cause choking. Don’t dispose of your phone in fire. Your phone can produce a loud sound. To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your phone near your ear while the loudspeaker is in use. 11 Avoid contact with anything magnetic. Avoid extreme temperatures. Keep away from pacemakers and other electronic medical devices. Avoid contact with liquids. Keep your phone dry. Turn off when asked to in hospitals and medical facilities. Do not attempt to disassemble your phone. Turn off when told to on aircraft and at airports. Only use approved accessories. Turn off when near explosive materials or liquids. Don’t rely on your phone as a primary device for emergency communications. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. 12 Radio Frequency (RF) Energy General Statement on RF Energy Your phone contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits. Specific Absorption Rate (SAR) Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. The guidelines use a unit of measurement known as Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 1.6 W/kg and the highest SAR value for this device when tested at the head was 1.006W/kg, and when tested at the body was 0.431 W/kg with 10 mm distance. A…

Text truncated - open the document above for the full version.

ZTE Corporation Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2020/6/15 Subject; Request for Confidentiality FCC ID: SRQ-ZTG01 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Bom List Tune up procedure NII Software Security In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Yu Gong Title: Certification Manager

ZTE Corporation. Letter of Authorization Company: ZTE Corporation Address: ZTE Plaza, Keji Road South, Shenzhen, China Product Name: 5G NR Multi model smart phone Model Number: ZTG01 FCC Identifier: SRQ-ZTG01 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Yu Gong Date: 2020/6/15 Title: Certification Manager Signature of applicant:

External Photo

1. The information that will be displayed on the E‐label and the some informatiuon will remain in the user manaul. Information On E‐Label In Manual FCC ID number Yes No 15.19 statement(This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.) No Yes Class A/B Digital Device user manaual statements No Yes Caution to the User that Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment No Yes 2. And the E‐label can be read as below steps: Settings > System > E-labelling information. 3. Image of the E‐Label

Internal Photo WIFI ANT 1 BT/WIFI ANT 0+GPS WWAN HB ANT0 Sub ANT WWAN LB ANT 1

Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 1 / 33 Appendix A: SAR System performance Check Plots Measurement Liquid Frequency Test Date System Check Head 750 2020-05-13 System Check Body 750 2020-05-13 System Check Head 835 2020-05-14 System Check Body 835 2020-05-14 System Check Head 1900 2020-05-17 System Check Body 1900 2020-05-17 System Check Head 2450 2020-05-18 System Check Body 2450 2020-05-18 System Check Head 5200 2020-05-19 System Check Body 5200 2020-05-19 System Check Head 5400 2020-05-19 System Check Body 5400 2020-05-19 System Check Head 5600 2020-05-19 System Check Body 5600 2020-05-19 System Check Head 5800 2020-05-19 System Check Body 5800 2020-05-19 Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 2 / 33 System Performance Check (Head, 750MHz) Type: Phone measurement Area scan resolution: dx=8mm,dy=8mm Zoom scan resolution: dx=8mm, dy=8mm, dz=5mm Date of measurement: 05/13/2020 Measurement duration: 22 minutes 09 seconds A. Experimental conditions. Phantom File dx=8mm dy=8mm Phantom 5x5x7,dx=8mm dy=8mm dz=5mm Device Position Dipole Band 750MHz Channels Signal CW B. SAR Measurement Results Band SAR E-Field Probe SATIMO SN_41/18_EPG0330 Frequency (MHz) 750 Relative permittivity (real part) 41.87 Relative permittivity 21.60 Conductivity (S/m) 0.90 Power drift (%) -1.33 Ambient Temperature: 22.2°C Liquid Temperature: 22.6°C ConvF: 1.54 Crest factor: 1:1 SURFACE SAR VOLUME SAR Maximum location: X=-2.00, Y=-12.00 SAR Peak: 0.11 W/kg SAR 10g (W/Kg) 0.057736 SAR 1g (W/Kg) 0.080363 Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 3 / 33 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.1648 0.0816 0.0538 0.0461 0.0309 3D screen shot Hot spot position Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 4 / 33 System Performance Check (Body, 750MHz) Type: Phone measurement Area scan resolution: dx=8mm,dy=8mm Zoom scan resolution: dx=8mm, dy=8mm, dz=5mm Date of measurement: 05/13/2020 Measurement duration: 22 minutes 03 seconds A. Experimental conditions. Phantom File dx=8mm dy=8mm Phantom 5x5x7,dx=8mm dy=8mm dz=5mm Device Position Dipole Band 750MHz Channels Signal CW B. SAR Measurement Results Band SAR E-Field Probe SATIMO SN_41/18_EPG0330 Frequency (MHz) 750 Relative permittivity (real part) 55.49 Relative permittivity 22.80 Conductivity (S/m) 0.95 Power drift (%) -1.50 Ambient Temperature: 22.2°C Liquid Temperature: 22.6°C ConvF: 1.59 Crest factor: 1:1 SURFACE SAR VOLUME SAR Maximum location: X=-8.00, Y=-9.00 SAR Peak: 0.12 W/kg SAR 10g (W/Kg) 0.062943 SAR 1g (W/Kg) 0.091060 Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 5 / 33 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.1227 0.0948 0.0688 0.0506 0.0380 3D screen shot Hot spot position Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 6 / 33 System Performance Check (Head, 835MHz) Type: Phone measurement Area scan resolution: dx=8mm,dy=8mm Zoom scan resolution: dx=8mm, dy=8mm, dz=5mm Date of measurement: 05/14/2020 Measurement duration: 22 minutes 06 seconds A. Experimental conditions. Phantom File dx=8mm dy=8mm Phantom 5x5x7,dx=8mm dy=8mm dz=5mm Device Position Dipole Band 835MHz Channels Signal CW B. SAR Measurement Results Band SAR E-Field Probe SATIMO SN_41/18_EPG0330 Frequency (MHz) 835 Relative permittivity (real part) 41.53 Relative permittivity 19.48 Conductivity (S/m) 0.92 Power drift (%) -2.66 Ambient Temperature: 22.2°C Liquid Temperature: 22.6°C ConvF: 1.92 Crest factor: 1:1 SURFACE SAR VOLUME SAR Maximum location: X=-2.00, Y=-16.00 SAR Peak: 0.14 W/kg SAR 10g (W/Kg) 0.065465 SAR 1g (W/Kg) 0.098655 Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 7 / 33 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.1346 0.1036 0.0740 0.0526 0.0371 3D screen shot Hot spot position Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 8 / 33 System Performance Check (Body, 835MHz) Type: Phone measurement Area scan resolution: dx=8mm,dy=8mm Zoom scan resolution: dx=8mm, dy=8mm, dz=5mm Date of measurement: 05/14/2020 Measurement duration: 22 minutes 04 seconds A. Experimental conditions. Phantom File dx=8mm dy=8mm Phantom 5x5x7,dx=8mm dy=8mm dz=5mm Device Position Dipole Band 835MHz Channels Signal CW B. SAR Measurement Results Band SAR E-Field Probe SATIMO SN_41/18_EPG0330 Frequency (MHz) 835 Relative permittivity (real part) 55.20 Relative permittivity 20.91 Conductivity (S/m) 0.97 Power drift (%) -2.52 Ambient Temperature: 22.2°C Liquid Temperature: 22.6°C ConvF: 1.99 Crest factor: 1:1 SURFACE SAR VOLUME SAR Maximum location: X=-1.00, Y=-25.00 SAR Peak: 0.14 W/kg SAR 10g (W/Kg) 0.070150 SAR 1g (W/Kg) 0.103740 Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 9 / 33 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.2714 0.1059 0.0600 0.0535 0.0292 3D screen shot Hot spot position Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 10 / 33 System Performance Check (Head, 1900MHz) Type: Validation measurement Area scan resolution: dx=8mm,dy=8mm Zoom scan resolution: dx=8mm, dy=8mm, dz=5mm Date of measurement: 05/17/2020 Measurement duration: 22 minutes 08 seconds A. Experimental conditions. Phantom File dx=8mm dy=8mm Phantom 5x5x7,dx=8mm dy=8mm dz=5mm Device Position Dipole Band 1900MHz Channels Signal CW B. SAR Measurement Results Band SAR E-Field Probe SATIMO SN_41/18_EPG0330 Frequency (MHz) 1900 Relative permittivity (real part) 40.46 Relative permittivity 13.26 Conductivity (S/m) 1.40 Power Drift (%) -1.87 Ambient Temperature: 22.1°C Liquid Temperature: 22.6°C ConvF: 2.34 Duty factor: 1:1 SURFACE SAR VOLUME SAR Maximum location: X=-8.00, Y=-15.00 SAR Peak: 0.63 W/kg SAR 10g (W/Kg) 0.196324 SAR 1g (W/Kg) 0.373255 Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 11 / 33 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.6319 0.4031 0.2252 0.1284 0.0783 3D screen shot Hot spot position Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 12 / 33 System Performance Check (Body, 1900MHz) Type: Validation measurement Area scan resolution: dx=8mm,dy=8mm Zoom scan resolution: dx=8mm, …

Text truncated - open the document above for the full version.

Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 1 / 33 Appendix B: SAR Measurement results Plots Plot Frequency/Mode Testing Position and Channel Test Date 1 GSM850 Left Cheek Middle 2020/05/14 2 GSM850/GPRS4Tx Body Back, Middle ,10mm 2020/05/14 3 GSM1900 Left Cheek Middle 2020/05/17 4 GSM1900/GPRS4Tx Body Back, Middle ,10mm 2020/05/17 5 WCDMA850 Left Tilt15°Middle 2020/05/14 6 WCDMA850 Body Back, Middle ,10mm 2020/05/14 7 LTE Band5 Left Cheek Middle 2020/05/14 8 LTE Band5 Body Back, Middle ,10mm 2020/05/14 9 LTE Band17 Left Cheek Middle 2020/05/13 10 LTE Band17 Body Back, Middle ,10mm 2020/05/13 11 WIFI 2.4G Left Cheek Middle 2020/05/18 12 WIFI 2.4G Edge A, Middle ,10mm 2020/05/18 13 WIFI 5G Left Cheek Middle 2020/05/19 14 WIFI 5G Body Back, Middle ,10mm 2020/05/19 15 BT Right Cheek Middle 2020/05/18 16 BT Body Back, Middle ,10mm 2020/05/18 Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 2 / 33 Plot 1: GSM850, Left Cheek, Middle Type: Phone measurement Date of measurement: 05/14/2020 Measurement duration: 22 minutes 05 seconds Mobile Phone IMEI number: -- A. Experimental conditions. Area Scan dx=8mm dy=8mm ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Left Cheek Band GSM850 Channels 190 Signal GSM (Duty cycle: 1:8.3) B. SAR Measurement Results E-Field Probe SATIMO SN_41/18_EPG0330 Frequency (MHz) 836.6 Relative permittivity (real part) 41.53 Relative permittivity (imaginary part) 19.48 Conductivity (S/m) 0.92 Variation (%) -0.66 ConvF: 1.60 SURFACE SAR VOLUME SAR Maximum location: X=0.00, Y=16.00 SAR Peak: 1.19W/kg SAR 10g (W/Kg) 0.385075 SAR 1g (W/Kg) 0.697762 Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 3 / 33 Z (mm) 0.00 4.00 8.00 12.00 16.00 SAR (W/Kg) 1.1884 0.7566 0.4777 0.3074 0.2058 3D screen shot Hot spot position Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 4 / 33 Plot 2: GPRS850, Back, Middle,10mm Type: Phone measurement Date of measurement: 05/14/2020 Measurement duration: 22 minutes 02 seconds Mobile Phone IMEI number: -- A. Experimental conditions. Area Scan dx=8mm dy=8mm ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Back Band GSPRS850_4Tx Channels 190 Signal GPRS(Duty cycle: 1:2) B. SAR Measurement Results E-Field Probe SATIMO SN_41/18_EPG0330 Frequency (MHz) 836.6 Relative permittivity (real part) 55.20 Relative permittivity (imaginary part) 20.91 Conductivity (S/m) 0.97 Variation (%) -1.48 ConvF: 1.64 SURFACE SAR VOLUME SAR Maximum location: X=18.00, Y=-53.00 SAR Peak: 0.66 W/kg SAR 10g (W/Kg) 0.214564 SAR 1g (W/Kg) 0.377565 Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 5 / 33 Z (mm) 0.00 4.00 8.00 12.00 16.00 SAR (W/Kg) 0.6577 0.4030 0.2486 0.1629 0.1184 3D screen shot Hot spot position Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 6 / 33 Plot 3: GSM1900, Left Cheek, Middle Type: Phone measurement Date of measurement: 05/17/2020 Measurement duration: 22 minutes 01 seconds Mobile Phone IMEI number: -- A. Experimental conditions. Area Scan dx=8mm dy=8mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Left Cheek Band GSM1900 Channels 661 Signal GSM (Duty cycle: 1:8.3) B. SAR Measurement Results E-Field Probe SATIMO SN_41/18_EPG0330 Frequency (MHz) 1880 8 Relative permittivity (real part) 40.46 Relative permittivity (imaginary part) 13.26 Conductivity (S/m) 1.40 Variation (%) -3.33 ConvF: 2.03 SURFACE SAR VOLUME SAR Maximum location: X=-48.00, Y=-52.00 SAR Peak: 0.08 W/kg SAR 10g (W/Kg) 0.029949 SAR 1g (W/Kg) 0.048711 Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 7 / 33 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.0820 0.0493 0.0272 0.0187 0.0179 3D screen shot Hot spot position Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 8 / 33 Plot 4: GPRS1900, Back, Middle ,10mm Type: Phone measurement Date of measurement: 05/17/2020 Measurement duration: 22 minutes 03 seconds Mobile Phone IMEI number: -- A. Experimental conditions. Area Scan dx=8mm dy=8mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Back Band GPRS1900_4Tx Channels 661 Signal GPRS(Duty cycle: 1:2) B. SAR Measurement Results E-Field Probe SATIMO SN_41/18_EPG0330 Frequency (MHz) 1880 8 Relative permittivity (real part) 53.27 Relative permittivity (imaginary part) 14.21 Conductivity (S/m) 1.50 Variation (%) -2.85 ConvF: 2.08 SURFACE SAR VOLUME SAR Maximum location: X=-9.00, Y=6.00 SAR Peak: 0.66 W/kg SAR 10g (W/Kg) 0.225928 SAR 1g (W/Kg) 0.417543 Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 9 / 33 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.6560 0.4523 0.2792 0.1717 0.1065 3D screen shot Hot spot position Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 10 / 33 Plot 5: WCDMA850, Left Tilt15°, Middle Type: Phone measurement Date of measurement: 05/14/2020 Measurement duration: 22 minutes 09 seconds Mobile Phone IMEI number: -- A. Experimental conditions. Area Scan dx=8mm dy=8mm ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Left Tilt 15° Band Band5_WCDMA850 Channels 4183 Signal WCDMA (Duty cycle: 1:1) B. SAR Measurement Results E-Field Probe SATIMO SN_41/18_EPG0330 Frequency (MHz) 836.6 Relative permittivity (real part) 41.53 Relative permittivity (imaginary part) 19.48 Conductivity (S/m) 0.92 Variation (%) -0.33 ConvF: 1.60 SURFACE SAR VOLUME SAR Maximum location: X=-1.00, Y=9.00 SAR Peak: 1.50W/kg SAR 10g (W/Kg) 0.481944 SAR 1g (W/Kg) 0.872182 Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 11 / 33 Z (mm) 0.00 4.00 8.00 12.00 16.00 SAR (W/Kg) 1.4976 0.9431 0.5918 0.3831 0.2629 3D screen shot Hot spot position Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) 12 / 33 Plot 6: WCDMA850, Back, Middle,10mm Type: Phone measurement Date of measurement: 05/14/2020 Measurement duration: 22 minutes 14 seconds Mobile Phone IMEI number: -- A. Experimental conditions. Area Scan dx=8mm dy=8mm ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Back Band Ba…

Text truncated - open the document above for the full version.

Report No. SET2020-05992 ANNEX C: Calibration Reports EPGO 330 Probe Calibration Report SID750 Dipole Calibration Report SID835 Dipole Calibration Report SID1900 Dipole Calibration Report SID2450 Dipole Calibration Report SID5G Dipole Calibration Report Report No. SET2020-05992 EPGO330 Probe Calibration Report Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 SID750Dipole Calibration Report Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 SID835 Dipole Calibration Report Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 SID1900 Dipole Calibration Report Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 SID2450 Dipole Calibration Report Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992 Report No. SET2020-05992

Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) Page 1 of 52 FCC SAR TEST REPORT Report No.： SET2020-05992 Product： 5G NR Multi model smart phone Trade Name: ZTE Model No.： ZTG01 FCC ID： SRQ-ZTG01 Applicant： ZTE CORPORATION Address： ZTE Plaza, Keji Road South, Shenzhen, China. Issued by： CCIC Southern Testing Co., Ltd. Lab Location： Electronic Testing Building, No. 43 Shahe Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China. Tel： 86 755 26627338 Fax：86 755 26627238 Mail： [email protected] Website：http://www.ccic-set.com This test report consists of 52 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CCIC-SET. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CCIC-SET within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) Page 2 of 52 Test Report Product. ...................: 5G NR Multi model smart phone Model No. .................: ZTG01 Brand Name..............: ZTE FCC ID.......................: SRQ-ZTG01 Applicant....................: ZTE CORPORATION Applicant Address.......: ZTE Plaza, Keji Road South, Shenzhen, China. Manufacturer............: ZTE CORPORATION Manufacturer Address: ZTE Plaza, Keji Road South, Shenzhen, China. Test Standards..........: 47CFR §2.1093- Radiofrequency Radiation Exposure Evaluation: Portable Devices; ANSI C95.1–1992: Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz – 300 GHz.( IEEE Std C95.1-1991) IEEE 1528–2013: IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques Test Result...............: Pass Test Date..................: 2020.05.13-2020.05.19 Tested by ..............: 2020-06-15 Mei Chun, Test Engineer Reviewed by.............: 2020-06-15 Chris You, Senior Engineer Approved by...............: 2020-06-15 Shuangwen Zhang, Manager Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) Page 3 of 52 Contents Test Report ........................................................................................................................................... 2 1. Administrative Data ......................................................................................................................... 4 2. Equipment Under Test (EUT) .......................................................................................................... 5 3. SAR Summary ................................................................................................................................. 7 4. Specific Absorption Rate (SAR) ...................................................................................................... 8 5. Tissue check and recommend Dielectric Parameters ..................................................................... 12 6. SAR measurement procedure ......................................................................................................... 18 7. Conducted RF Output Power ......................................................................................................... 19 8. SAR test Exclusion and estimate SAR calculation: ....................................................................... 30 9. Scaling Factor calculation .............................................................................................................. 32 10. Test Results .................................................................................................................................. 34 11. Simultaneous Transmissions Analysis ......................................................................................... 45 12. Measurement Uncertainty ............................................................................................................ 47 13. Equipment List ............................................................................................................................. 51 ANNEX A: Appendix A: SAR System performance Check Plots..................................................... 52 ANNEX B: Appendix B: SAR Measurement results Plots................................................................ 52 ANNEX C: Appendix C: Calibration reports .................................................................................... 52 ANNEX D: Appendix D: SAR Test Setup ......................................................................................... 52 Report No. SET2020-05992 CCIC-SET/TRF:ISAR(2019-05-23) Page 4 of 52 1. Administrative Data 1.1 Testing Laboratory Test Site: CCIC Southern Testing Co., Ltd. Address: Electronic Testing Building, No. 43 Shahe Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China CNAS Lab Code: CCIC-SET is a third party testing organization accredited by China National Accreditation Service for Conformity Assessment (CNAS) according to ISO/IEC 17025. The accreditation certificate number is L1659. NVLAP Lab Code: CCIC-SET is a third party testing organization accredited by NVLAP according to ISO/IEC 17025. The accreditation certificate number is 201008-0. FCC Registration: CCIC Southern Electronic Product Testing (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files. Designation Number: CN5031, valid time is until December 31, 2020. ISED Registration: CCIC Southern Electronic Product Testing (Shenzhen) Co., Ltd. EMC Laboratory has been registered by …

Text truncated - open the document above for the full version.

Report No.: SET2020-06184 CCIC-SET/ TRF:IRF(2019-05-23) Page 1 of 72 RF TEST REPORT Report No.: SET2020-06184 Product Name: 5G NR Multi model smart phone FCC ID: SRQ-ZTG01 Model No. : ZTG01 Marketing Name: TBD Applicant: ZTE Corporation. Address: ZTE Plaza, Keji Road South, Shenzhen, China. Dates of Testing: 05/20/2020 —06/15/2020 Issued by: CCIC Southern Testing Co., Ltd. Lab Location: Electronic Testing Building, No. 43 Shahe Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China. Tel: 86 755 26627338 Fax: 86 755 26627238 This test report consists of 72 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CCIC-SET. The test results in the report only apply to the tested sample. The test report shall be invalid wit…

Text truncated - open the document above for the full version.