SS3-DA2SUE12011DJI AIR 2S

DJI Air 2S Quick Start Guide Aircraft The DJI TM Air 2S features a new folding design and a fully stabilized 3-axis gimbal camera capable of shooting 4K video and 20 MP photos. DJI signature technologies such as Obstacle Sensing and Intelligent Flight Modes like ActiveTrack 3.0, Point of Interest (POI) 3.0, QuickShots, and Advanced Pilot Assistance Systems 4.0, make capturing complex shots effortless and easy. The DJI Air 2S boasts a maximum flight speed of 42.5 mph (68.4 kph) and a maximum flight time* of 31 minutes. 1. Forward Vision System 2. Propellers 3. Motors 4. Landing Gears (Built-in antennas) 5. Gimbal and Camera 6. Downward Vision System 7. Auxiliary Bottom Light 8. Infrared Sensing System 9. USB-C Port 10. Battery Buckles 11. Front LEDs 12. Aircraft Status Indicators 13. Backward Vision System 14. Intelligent Flight Battery 15. Power Button 16. Battery Level LEDs 17. microSD Card Slot 18. Upward Vision System Remote Controller Built into the DJI RC-N1 remote controller is DJI’s long-range transmission technology O-Sync 3.0, offering a maximum transmission range of 7.45 mi (12 km) and displaying video from the aircraft to DJI Fly on your mobile device at up to 1080p. 1. Power Button 2. Flight Mode Switch 3. Flight Pause/RTH Button 4. Battery Level LEDs 5. Control Sticks 6. Customizable Button 7. Photo/Video Toggle 8. Remote Controller Cable 9. Mobile Device Holder 10. Antenna 11. USB-C Port 12. Control Sticks Storage Slot 13. Gimbal Dial 14. Shoot/Record Button 15. Mobile Device Slot Downloading the DJI Fly App Search for ‘DJI Fly’ in the App Store or Google Play, or scan the QR code to download the app on your mobile device. Charging the Batteries Use the provided charger to fully charge the Intelligent Flight Battery before first time use. Charge the remote controller via the USB-C port using the provided charger. Preparing the Remote Controller 1. Attach the control sticks. 2. Pull out the mobile device holder, and then unplug the end with mobile phone mark of the RC cable. 3. Place the mobile device onto the mobile device holder, and plug the RC cable into the mobile device. Preparing the Aircraft Preparing for Take off 1. Press the power button of the Intelligent Flight Battery once to check the current battery level. Press once, then again and hold to turn on/off the aircraft. 2. Press the power button of the remote controller once to check the current battery level. Press once, then again and hold to turn on/off the remote controller. 3. Launch DJI Fly. When connect an Android mobile device to the remote controller for the first time, select the default connection settings when there is a prompt. **Use your DJI account to activate the aircraft. Activation requires an internet connection. Flight Remote Controller Operation Specifications Aircraft（Model: DA2SUE1） Operating Temperature 0° to 40°C Operating Frequency 2.4-2.4835 GHz, 5.725-5.850 GHz* Transmitter Power（EIRP） 2.4 GHz: ≤30 dBm (FCC), ≤20 dBm (CE), ≤20 dBm (SRRC) , ≤20 dBm (MIC) 5.8 GHz: ≤30 dBm (FCC), ≤14 dBm (CE), ≤29 dBm (SRRC) Remote Controller（Model: RC231） Operating Temperature 0° to 40°C Transmitter Power（EIRP） 2.4G: ≤26 dBm (FCC), ≤20 dBm (CE), ≤20 dBm (SRRC) , ≤20 dBm (MIC) 5.8G: ≤26 dBm (FCC), ≤14 dBm (CE), ≤26 dBm (SRRC) Intelligent Flight Battery Capacity 3500mAh Voltage 11.55 V Battery Type LiPo 3S Energy 40.42 Wh Charging Temperature Range 5°C - 40°C *5.8 GHz is not supported in some regions. Observe the local laws and regulations. Compliance Information FCC Compliance Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information The aircraft complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This remote controller complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specifc operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue.The highest SAR value reported under …

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name SZ DJI TECHNOLOGY CO., LTD Address 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong 518057 China Grantee Code SS3 FCC ID SS3-DA2SUE12011 Authorized Contact Name fajia Wang Contact Email [email protected] Contact Phone +8675586152250 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 11/9/2020 Print Name: fajia Wang Title: PM *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SZ DJI TECHNOLOGY CO., LTD Date: 11/9/2020 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: SS3-DA2SUE12011 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with SZ DJI TECHNOLOGY CO., LTD This authorization is valid until further written notice from the applicant. Print Name: fajia Wang Title: PM Signature: On behalf of Company: SZ DJI TECHNOLOGY CO., LTD Telephone: +8675586152250 E-mail: [email protected]

SZ DJI TECHNOLOGY CO., LTD To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding: Confidentiality Request regarding application for FCC ID: SS3-DA2SUE12011 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Part Lists Software Security Description The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: fajia Wang Title: PM Signature: On behalf of Company: SZ DJI TECHNOLOGY CO., LTD Telephone: +8675586152250 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 7 External Photos for SZEM2011011220CR FCC ID:SS3-DA2SUE12011 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 7 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 7 of 7

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 10 Internal Photos for SZEM2011011220CR FCC ID:SS3-DA2SUE12011 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 10 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 10 Antenna 1 Antenna 2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 10 Antenna 4 Antenna 3 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 7 of 10 Antenna Connector2 Antenna Connector4 Antenna Connector1 Antenna Connector3 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 8 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 9 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 10 of 10

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122004 Page: 1 of 9 Keny Xu EMC Laboratory Manager 1 Cover page RF Exposure Evaluation Report Application No.: SZEM2011011220CR Applicant: SZ DJI TECHNOLOGY CO., LTD. Address of Applicant: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong, China Manufacturer: SZ DJI TECHNOLOGY CO., LTD. Address of Manufacturer: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong, China Equipment Under Test (EUT): Product Name: DJI AIR 2S Model No.: DA2SUE1 Trade mark: DJI FCC ID: SS3-DA2SUE12011 Standards: 47 CFR Part 1.1307 47 CFR Part 1.1310 47 CFR Part 2.1091 Date of Receipt: 2020-11-06 Date of Test: 2020-11-10 to 2020-12-03 Date of Issue: 2020-12-08 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122004 Page: 2 of 9 2 Version Version Chapter Date Modifier Remark 01 2020-12-08 Original Authorized for issue by: Harry Wu/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122004 Page: 3 of 9 3 Contents Page 1 COVER PAGE ........................................................................................................................................ 1 2 VERSION ................................................................................................................................................ 2 3 CONTENTS ............................................................................................................................................ 3 4 GENERAL INFORMATION ..................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ............................................................................................................. 4 4.2 TEST LOCATION .................................................................................................................................... 6 4.3 TEST FACILITY....................................................................................................................................... 6 4.4 DEVIATION FROM STANDARDS ................................................................................................................. 6 4.5 ABNORMALITIES FROM STANDARD CONDITIONS......................................................................................... 6 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER .............................................................................. 6 5 RF EXPOSURE EVALUATION ............................................................................................................... 7 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ............................................................................................. 7 5.1.1 Limits .......................................................................................................................................... 7 5.1.2 Test Procedure ........................................................................................................................... 7 4.1.3 EUT RF EXPOSURE EVALUATION ........................................................................................................ 8-9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122004 Page: 4 of 9 4 General Information 4.1 General Description of EUT Power adapter: Model: P2C38 Input: AC100-240V,50-60Hz,1.3A Output: DC13.2V,2.82A(Main),DC5.0V,2.0A Battery: DC11.55V lithium-ion Polymer battery(3500mAh) For 2.4G: Operation Frequency: 1.4MHz BW:2403.5MHz-2469.5MHz; 1.4MHz BW CA:2405.12MHz-2471.12MHz; 3MHz BW:2408.5MHz-2465.5MHz; 3MHz BW CA:2411.2MHz-2468.2MHz; 10MHz BW:2407.5MHz-2467.5MHz; 20MHz BW:2412.5MHz-2462.5MHz; 40MHz BW:2422.5MHz-2452.5MHz Modulation Type: OFDM Number of Channels: 1.4MHz BW:34; 1.4MHz BW CA:34; 3MHz BW:20; 3MHz BW CA:20; 10MHz BW:61; 20MHz BW:51; 40MHz BW:31 Channel Spacing: 1.4MHz BW:2MHz; 1.4MHz BW CA:2MHz; 3MHz BW:3MHz; 3MHz BW CA:3MHz; 10MHz BW:1MHz; 20MHz BW:1MHz; 40MHz BW:1MHz Antenna Type: FPC Antenna Antenna Gain: Antenna 1&2: 2.5dBi, Antenna 3&4: 1.5dBi Antenna Combination: Antenna 1+Antenna 2, Antenna 1+Antenna 4, Antenna 2+Antenna 3, Antenna 3+Antenna 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122004 Page: 5 of 9 For 5.8G: Operation Frequency: 1.4MHz BW:5728.5MHz-5846.5MHz; 1.4MHz BW CA:5730.12MHz-5848.12MHz; 3MHz BW:5730.5MHz-5844.5MHz; 3MHz BW CA:5733.2MHz-5847.2MHz; 10MHz BW:5730.5MHz-5844.5MHz; 20MHz BW:5735.5MHz-5839.5MHz; 40MHz BW:5745.5MHz-5829.5MHz Moudulation Type: OFDM Number of Channels: 1.4MHz BW:60; 1.4MHz BW CA:60; 3MHz BW:39; 3MHz BW CA:39; 10MHz BW:115; 20MHz BW:105; 40MHz BW:85 Channel Spacing: 1.4MHz BW:2MHz; 1.4MHz BW CA:2MHz; 3MHz BW:3MHz; 3MHz BW CA:3MHz; 10MHz BW:1MHz; 20MHz BW:1MHz; 40MHz BW:1MHz Antenna Type: FPC Antenna Antenna Gain: Antenna 1&2: 4.5dBi, Antenna 3&4: 2dBi Antenna Combination: Antenna 1+Antenna 2, Antenna 1+Antenna 4, Antenna 2+Antenna 3, Antenna 3+Antenna 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122004 Page: 6 of 9 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the America…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 1 of 321 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM2011011220CR Applicant: SZ DJI TECHNOLOGY CO., LTD. Address of Applicant: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong, China Manufacturer: SZ DJI TECHNOLOGY CO., LTD. Address of Manufacturer: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong, China Equipment Under Test (EUT): EUT Name: DJI AIR 2S Model No.: DA2SUE1 Trade mark: DJI FCC ID: SS3-DA2SUE12011 Standard(s) : 47 CFR Part 15, Subpart E 15.407 Date of Receipt: 2020-11-06 Date of Test: 2020-11-10 to 2020-12-03 Date of Issue: 2020-12-08 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 2 of 321 Revision Record Version Chapter Date Modifier Remark 01 2020-12-08 Original Authorized for issue by: Harry Wu/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 3 of 321 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart E 15.407 N/A 47 CFR Part 15, Subpart C 15.203 Pass Transmission in the Absence of Data 47 CFR Part 15, Subpart E 15.407 N/A 47 CFR Part 15, Subpart C 15.407 (c) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Duty Cycle 47 CFR Part 15, Subpart E 15.407 KDB 789033 II B 1 KDB 789033 D02 II B 1 Pass 99% Bandwidth 47 CFR Part 15, Subpart E 15.407 KDB 789033 II D N/A Pass Minimum 6 dB bandwidth 47 CFR Part 15, Subpart E 15.407 KDB 789033 D02 II C 2 47 CFR Part 15, Subpart C 15.407 (e) Pass Maximum Conducted output power 47 CFR Part 15, Subpart E 15.407 KDB 789033 D02 II E 47 CFR Part 15, Subpart C 15.407 (a) Pass Peak Power spectrum density 47 CFR Part 15, Subpart E 15.407 KDB 789033 D02 II F 47 CFR Part 15, Subpart C 15.407 (a) Pass Radiated Emissions 47 CFR Part 15, Subpart E 15.407 KDB 789033 D02 II G 47 CFR Part 15, Subpart C 15.209 & 15.407(b) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart E 15.407 KDB 789033 D02 II G 47 CFR Part 15, Subpart C 15.209 & 15.407(b) Pass Frequency Stability 47 CFR Part 15, Subpart E 15.407 ANSI C63.10 (2013) Section 6.8 47 CFR Part 15, Subpart C 15.407 (g) Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 4 of 321 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 DETAILS OF E.U.T. ............................................................................................................................... 6 4.2 CABLE ................................................................................................................................................. 6 4.3 DETAILS OF SAMPLE SETTING. ............................................................................................................... 6 4.4 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 7 4.5 MEASUREMENT UNCERTAINTY .............................................................................................................. 7 4.6 TEST LOCATION .................................................................................................................................... 8 4.7 TEST FACILITY ...................................................................................................................................... 8 4.8 DEVIATION FROM STANDARDS ............................................................................................................... 8 4.9 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 8 5 EQUIPMENT LIST ...................................................................................................................................... 9 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 13 6.1 ANTENNA REQUIREMENT .................................................................................................................... 13 6.1.1 Test Requirement: ....................................................................................................................... 13 6.1.2 Conclusion ................................................................................................................................... 13 6.2 TRANSMISSION IN THE ABSENCE OF DATA ............................................................................................ 14 6.2.1 Test Requirement: ....................................................................................................................... 14 6.2.1 Conclusion ................................................................................................................................... 14 7 RADIO SPECTRUM MATTER TEST RESULTS ..................................................................................... 15 7.1 DUTY CYCLE ....................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 176 of 321 5. Frequency Stability 5.1 Test Result Test Condition Test Mode Test Frequency [MHz] Ant Result [ppm] Limit [ppm] Verdict NTNV 1.4M TX 5728.5 1 -2.09 <=20 PASS 5786.5 1 -2.07 <=20 PASS 5846.5 1 -2.39 <=20 PASS 1.4M_CA TX 5730.12 1 -2.09 <=20 PASS 5786.12 1 -2.42 <=20 PASS 5848.12 1 -2.05 <=20 PASS 3M TX 5730.5 1 0 <=20 PASS 5787.5 1 0 <=20 PASS 5844.5 1 0 <=20 PASS 3M_CA TX 5733.2 1 0 <=20 PASS 5790.2 1 0 <=20 PASS 5847.2 1 0 <=20 PASS SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 177 of 321 1.4M,1.4M CA,3M,3M CA-MIMO Antenna 1+Antenna 2, Antenna 1+Antenna 4, Antenna 2+Antenna 3, Antenna 3+Antenna 4 were tested. Only the worst case(Antenna 1+Antenna 2) was recorded in the report. 1. Duty Cycle 1.1 Test Result Test Mode Channel Frequency (MHz) TX Type ANT No. T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) 1.4M TX 5728.5 MIMO 1 100.000 100.000 100.00 0.00 5786.5 MIMO 1 100.000 100.000 100.00 0.00 5846.5 MIMO 1 100.000 100.000 100.00 0.00 1.4M_CA TX 5730.12 MIMO 1 100.000 100.000 100.00 0.00 5786.12 MIMO 1 100.000 100.000 100.00 0.00 5848.12 MIMO 1 100.000 100.000 100.00 0.00 3M TX 5730.5 MIMO 1 100.000 100.000 100.00 0.00 5787.5 MIMO 1 100.000 100.000 100.00 0.00 5844.5 MIMO 1 100.000 100.000 100.00 0.00 3M_CA TX 5733.2 MIMO 1 100.000 100.000 100.00 0.00 5790.2 MIMO 1 100.000 100.000 100.00 0.00 5847.2 MIMO 1 100.000 100.000 100.00 0.00 1.2 Test Graph SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 178 of 321 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 179 of 321 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 180 of 321 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 181 of 321 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 182 of 321 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 183 of 321 2. Bandwidth 2.1 Test Result Test Mode Frequency (MHz) TX Type ANT No. 6dB Emission Bandwidth Verdict Test Result (MHz) Limits (MHz) 1.4M TX 5728.5 MIMO 1 1.099 ≥0.5 PASS 5786.5 MIMO 1 1.100 ≥0.5 PASS 5846.5 MIMO 1 1.098 ≥0.5 PASS 1.4M_CA TX 5730.12 MIMO 1 1.098 ≥0.5 PASS 5786.12 MIMO 1 1.099 ≥0.5 PASS 5848.12 MIMO 1 1.100 ≥0.5 PASS 3M TX 5730.5 MIMO 1 2.180 ≥0.5 PASS 5787.5 MIMO 1 2.184 ≥0.5 PASS 5844.5 MIMO 1 2.185 ≥0.5 PASS 3M_CA TX 5733.2 MIMO 1 2.179 ≥0.5 PASS 5790.2 MIMO 1 2.181 ≥0.5 PASS 5847.2 MIMO 1 2.184 ≥0.5 PASS Test Mode Frequency (MHz) TX Type ANT No. 99% Occupied Bandwidth Test Result (MHz) 1.4M TX 5728.5 MIMO 1 1.327 Only for Report Use SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 184 of 321 5786.5 MIMO 1 1.334 Only for Report Use 5846.5 MIMO 1 1.324 Only for Report Use 1.4M_CA TX 5730.12 MIMO 1 1.344 Only for Report Use 5786.12 MIMO 1 1.326 Only for Report Use 5848.12 MIMO 1 1.339 Only for Report Use 3M TX 5730.5 MIMO 1 2.394 Only for Report Use 5787.5 MIMO 1 2.394 Only for Report Use 5844.5 MIMO 1 2.395 Only for Report Use 3M_CA TX 5733.2 MIMO 1 2.412 Only for Report Use 5790.2 MIMO 1 2.396 Only for Report Use 5847.2 MIMO 1 2.391 Only for Report Use 2.2 Test Graph - Emission Bandwidth SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 185 of 321 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 186 of 321 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 187 of 321 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 188 of 321 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 189 of 321 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 190 of 321 2.3 Test Graph - 99% Occupied Bandwidth SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201101122003 Page: 191 of 321 SGS-CSTC Standards Technica…

Text truncated - open the document above for the full version.