SS3-MA2UE1N1911MAVIC AIR 2

Mavic Air 2 Quick Start Guide Aircraft The DJI TM MAVIC TM Air 2 features a new folding design and a fully stabilized 3-axis gimbal camera capable of shooting 4K video and 48 MP photos. DJI signature technologies such as Obstacle Sensing and Intelligent Flight Modes like ActiveTrack 3.0, Point of Interest (POI) 3.0, QuickShot, and Advanced Pilot Assistance Systems 2.0, make capturing complex shots effortless and easy. The Mavic Air 2 boasts a maximum flight speed of 42.5 mph (68.4 kph) and a maximum flight time* of 34 minutes. 1. Forward Vision System 2. Propellers 3. Motors 4. Landing Gears (Built-in antennas) 5. Gimbal and Camera 6. Downward Vision System 7. Auxiliary Bottom Light 8. Infrared Sensing System 9. USB-C Port 10. Battery Buckles 11. Front LEDs 12. Aircraft Status Indicators 13. Backward Vision System 14. Intelligent Flight Battery 15. Power Button 16. Battery Level LEDs 17. microSD Card Slot Remote Controller Built into the remote controller is DJI’s long-range transmission technology OCUSYNC TM 2.0, offering a maximum transmission range of 5 mi (8 km) and displaying video from the aircraft to DJI Fly on your mobile device at up to 1080p. 1. Power Button 2. Flight Mode Switch 3. Flight Pause/RTH Button 4. Battery Level LEDs 5. Control Sticks 6. Customizable Button 7. Photo/Video Toggle 8. Remote Controller Cable 9. Mobile Device Holder 10. USB-C Port 11. Control Sticks Storage Slot 12. Gimbal Dial 13. Shoot/Record Button Downloading the DJI Fly App Search for ‘DJI Fly’ in the App Store or Google Play, or scan the QR code to download the app on your mobile device. Charging the Batteries 1. Use the provided charger to fully charge the Intelligent Flight Battery before first time use. 2. Use a USB charger to charge the remote controller via the USB-C port. Preparing the Remote Controller 1. Attach the control sticks. 2. Pull out the mobile device holder, and then unplug the end with mobile phone mark of the RC cable. 3. Place the mobile device onto the mobile device holder, and plug the RC cable into the mobile device. Preparing the Aircraft Preparing for Take off 1. Press the power button of the remote controller once to check the current battery level. Press once, then again and hold to turn on/off the remote controller. 2. Press the power button of the Intelligent Flight Battery once to check the current battery level. Press once, then again and hold to turn on/off the aircraft. 3. Launch DJI Fly. * When connect an Android mobile device to the remote controller for the first time, select the default connection settings when there is prompt. **Use your DJI account to activate the aircraft. Activation requires an internet connection. Flight Remote Controller Operation Specifications Aircraft（Model: MA2UE1N） Operating Temperature 0° to 40°C Operating Frequency 2.4-2.4835 GHz, 5.725-5.850 GHz* Transmitter Power 2.4G: ≤20dBm (FCC Conducted power), ≤20 dBm (CE EIRP), ≤20 dBm (SRRC EIRP), ≤20 dBm (MIC conducted power) 5.8G: ≤23.5 dBm (FCC Conducted power), ≤14 dBm (CE EIRP), ≤26 dBm (SRRC EIRP) Remote Controller（Model: RC231） Operating Temperature 0°C-40°C Transmitter Power 2.4G: ≤24.5 dBm (FCC Conducted power), ≤20 dBm (CE EIRP), ≤20 dBm (SRRC EIRP) , ≤20 dBm (MIC conducted power) 5.8G: ≤23.5 dBm (FCC Conducted power), ≤14 dBm (CE EIRP), ≤26 dBm (SRRC EIRP) Intelligent Flight Battery Capacity 3500mAh Voltage 11.55 V Battery Type LiPo 3S Energy 40.4 Wh Charging Temperature Range 5°C - 40°C * 5.8 GHz is not supported in some regions. Observe the local laws and regulations. Compliance Information FCC ID information: How to view the aircraft label: press and hold the left and right buttons of the battery to remove the battery. After the battery is removed, the label information can be seen in the battery compartment. FCC Compliance Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. The device (AIRCRAFT) complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna of the drone shall not be less than 20cm during normal operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The device (Remote control) is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 4 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during pr…

Text truncated - open the document above for the full version.

SZ DJI TECHNOLOGY CO., LTD Date: 2019-12-23 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: SS3-MA2UE1N1911 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Joyce Shi in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with SZ DJI TECHNOLOGY CO., LTD This authorization is valid until further written notice from the applicant. Print Name: fajia wang Title:PM Signature: On behalf of Company: SZ DJI TECHNOLOGY CO., LTD Telephone: +8675586152250 E-mail: [email protected]

SZ DJI TECHNOLOGY CO., LTD To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding: Confidentiality Request regarding application for FCC ID: SS3-MA2UE1N1911 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 90 days from the grant date, whichever is less. If the device is marketed within 90 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: fajia wang Title:PM Signature: On behalf of Company: SZ DJI TECHNOLOGY CO., LTD Telephone: +8675586152250 E-mail: [email protected] BOM

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 6 External Photos for SZEM1912021060CR FCC ID: SS3-MA2UE1N1911 IC: 11805A-MA2UE1N1911 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 6 1 EUT Constructional Details Ant 0 Ant 1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 6

全球31*64 底色参考cool gray 6C This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Model/型号: MA2UE1N MAVIC AIR 2 FCC ID: SS3-MA2UE1N1911 018-200001 R-C-dji-MA2UE1N IC: 11805A-MA2UE1N1911 中国制造 MADE IN CHINA 深圳市大疆创新科技有限公司 SZ DJI TECHNOLOGY CO., LTD. Address: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China Powered by Battery: 11.55V 3500mAh WARNING HAZARDOUS MOVING PARTS KEEP FINGERS AND OTHER BODY PARTS AWAY CMIIT ID: 2019AP12460 0010002 CCXXXXXXXXXXXX 3.5mm 全球31.5*65.5 底色参考cool gray 6C Model/型号: MA2UE3W MAVIC AIR 2 FCC ID: SS3-MA2UE1N1911 IC: 11805A-MA2UE1N1911 Powered by Battery: 11.55V 3500mAh CMIIT ID: 2020AP0736 0016501 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. 018-200001 R-C-dji-MA2UE1N 中国制造 MADE IN CHINA 深圳市大疆创新科技有限公司 SZ DJI TECHNOLOGY CO., LTD. Address: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China WARNING HAZARDOUS MOVING PARTS KEEP FINGERS AND OTHER BODY PARTS AWAY XXXXX-XX-XXXXX

SZ DJI TECHNOLOGY CO., LTD Justification of Label Location Regarding: Label Location of MAVIC AIR 2, FCC ID: SS3-MA2UE1N1911 The Label of equipment will not be visible at the time of purchase on the exterior of the equipment enclosure. Per KDB 784748 D01 Labelling Part 15&18 Guidelines v08, we use an alternative solution to place the FCC Label on the device, all requirements as below are satisfied: Requirement Justification 1 The Device is handheld Yes, it’s a handheld. 2 The FCC identifier is visible at the time of purchase. The FCC ID on the box, or additional documentation directing the user where to find the FCC Label, also satisfies this requirement. Instruction to User where to find the FCC Label is properly addressed in the user manual. 3 The user accessible area must not require any special tools for access, and the FCC label must not be placed on o removable part. It’s in the battery compartment back cover of which could be easily opened without any special tools. Print Name: fajia wang Title:PM Signature: On behalf of Company: SZ DJI TECHNOLOGY CO., LTD Telephone: +8675586152250 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 8 Internal Photos for SZEM1912021060CR FCC ID: SS3-MA2UE1N1911 IC: 11805A-MA2UE1N1911 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 8 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 8 Ant 0 Ant 1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 7 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 8 of 8

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202106004 Page: 1 of 11 Keny Xu EMC Laboratory Manager 1 Cover Page RF Exposure Evaluation Report Application No.: SZEM1912021060CR Applicant: SZ DJI TECHNOLOGY CO., LTD. Address of Applicant: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China Manufacturer: SZ DJI TECHNOLOGY CO., LTD. Address of Manufacturer: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China Equipment Under Test (EUT): Product Name: MAVIC AIR 2 Model No.: MA2UE1N, MA2UE3W♣ ♣ ♣♣ ♣ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. ♣ ♣♣ ♣ DJI FCC ID: SS3-MA2UE1N1911 IC: 11805A-MA2UE1N1911 Standards: 47 CFR PART 1.1310 47 CFR PART 2.1091 RSS102 Issue 5 March 2015 Date of Receipt: 2019-12-10 Date of Test: 2019-12-15 to 2019-12-30 Date of Issue: 2020-01-09 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202106004 Page: 2 of 11 2 Version Revision Record Version Chapter Date Modifier Remark 01 2020-01-09 Original Authorized for issue by: Calvin Weng /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202106004 Page: 3 of 11 3 Contents 1 COVER PAGE .......................................................................................................................................... 1 2 VERSION ................................................................................................................................................. 2 3 CONTENTS ............................................................................................................................................. 3 4 GENERAL INFORMATION ...................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 4 4.2 TEST LOCATION ................................................................................................................................. 6 4.3 TEST FACILITY ................................................................................................................................... 6 4.4 DEVIATION FROM STANDARDS ............................................................................................................. 6 4.5 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................... 6 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................... 6 5 RF EXPOSURE EVALUATION ................................................................................................................ 7 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ......................................................................................... 7 5.1.1 Limits ........................................................................................................................................... 7 5.1.2 Test Procedure ............................................................................................................................ 8 5.1.3 EUT RF Exposure Evaluation .................................................................................................... 8-8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202106004 Page: 4 of 11 4 General Information 4.1 General Description of EUT Power Supply: DC11.55V by lithium-ion Polymer battery(3500mAh) Cable: USB type A to C cable: 0.5m shielded cable without ferrite core Power Adapter cable: 1m unshielded cable without ferrite core For 2.4G: Operation Frequency: 1.4MHz BW: 2407.5MHz ~ 2465.5MHz 1.4MHz BW CA: 2409.12MHz ~ 2467.12MHz 3MHz BW: 2417.5MHz to 2456.5MHz 10MHz BW: 2405.5MHz to 2476.5MHz 20MHz BW: 2410.5MHz to 2472.5MHz Modulation Type: 1.4MHz BW: OFDM 1.4MHz BW CA: OFDM 3MHz BW: OFDM 10MHz BW: OFDM 20MHz BW: OFDM Number of Channels: 1.4MHz BW: 30 1.4MHz BW CA: 30 3MHz BW: 14 10MHz BW: 72 20MHz BW:63 Channel Spacing: 1.4MHz BW: 2MHz 1.4MHz BW CA: 2MHz 3MHz BW: 3MHz 10MHz BW: 1MHz 20MHz BW: 1MHz Antenna Type: PCB antenna Antenna Gain: 1.5dBi For 5G: Operation Frequency: 1.4MHz BW: 5728.5MHz ~ 5844.5MHz; 1.4MHz BW CA: 5730.12MHz ~ 5846.12MHz; 3MHz BW: 5730.5MHz ~ 5844.5MHz; 10MHz BW: 5732.5MHz ~ 5844.5MHz; 20MHz BW: 5735.5MHz ~ 5839.5MHz Number of Channels: 1.4MHz BW: 59; 1.4MHz BW CA: 59; 3MHz BW: 39; 10MHz BW: 113; SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202106004 Page: 5 of 11 20MHz BW: 105 Modulation Type: OFDM Channel Spacing: 1.4MHz BW: 2MHz; 1.4MHz BW CA: 2MHz; 3MHz BW: 3MHz; 10MHz BW: 1MHz; 20MHz BW: 1MHz Antenna Gain: 2dBi Antenna Type: PCB antenna SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202106004 Page: 6 of 11 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Inter…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202106003 Page: 1 of 121 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM1912021060CR Applicant: SZ DJI TECHNOLOGY CO., LTD. Address of Applicant: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China Manufacturer: SZ DJI TECHNOLOGY CO., LTD. Address of Manufacturer: 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China Equipment Under Test (EUT): EUT Name: MAVIC AIR 2 Model No.: MA2UE1N, MA2UE3W♣ ♣ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade mark: DJI FCC ID: SS3-MA2UE1N1911 IC: 11805A-MA2UE1N1911 Standard(s) : 47 CFR Part 15, Subpart E 15.407 RSS-247 Issue 2, February 2017 RSS-Gen Issue 5, March 2019 Date of Receipt: 2019-12-10 Date of Test: 2019-12-15 to 2019-12-30 Date of Issue: 2020-01-09 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202106003 Page: 2 of 121 Revision Record Version Chapter Date Modifier Remark 01 2020-01-09 Original Authorized for issue by: Calvin Weng /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202106003 Page: 3 of 121 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart E 15.407 RSS-247 Issue 2 N/A 47 CFR Part 15, Subpart C 15.203; RSS-Gen Section 6.8 Pass Transmission in the Absence of Data 47 CFR Part 15, Subpart E 15.407 RSS-247 Issue 2 N/A 47 CFR Part 15, Subpart E 15.407 (c); RSS-247 Section 6.4(a) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Duty Cycle 47 CFR Part 15, Subpart E 15.407 RSS-247 Issue 2 ANSI C63.10 Section 12.2 ANSI C63.10 Section 12.2 Pass 99% Bandwidth RSS-247 Issue 2 ANSI C63.10 Section 6.9.3 RSS-Gen Section 6.7 Pass Minimum 6dB Bandwidth 47 CFR Part 15, Subpart E 15.407 RSS-247 Issue 2 ANSI C63.10 Section 11.8 47 CFR Part 15, Subpart E 15.407 (e); RSS-247 Section 6.2.4 Pass Maximum Conducted Output Power 47 CFR Part 15, Subpart E 15.407 RSS-247 Issue 2 ANSI C63.10 Section 11.9.2 47 CFR Part 15, Subpart E 15.407 (a); RSS-247 Section 6.2 Pass Power Spectrum Density 47 CFR Part 15, Subpart E 15.407 RSS-247 Issue 2 ANSI C63.10 Section 11.10 47 CFR Part 15, Subpart E 15.407 (a); RSS-247 Section 6.2 Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart E 15.407 RSS-247 Issue 2 ANSI C63.10 Section 12.7.3 47 CFR Part 15, Subpart E 15.209 & 15.407(b); RSS-247 Section 3.3 & RSS-Gen Section 8.10 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart E 15.407 RSS-247 Issue 2 ANSI C63.10 Section 12.7.3 47 CFR Part 15, 15.209 & 15.407(b) ; RSS-247 Section 6.2 & RSS-Gen Section 8.9 Pass Frequency Stability 47 CFR Part 15, Subpart E 15.407 ANSI C63.10 (2013) Section 6.8 47 CFR Part 15, Subpart C 15.407 (g) & RSS-Gen Section6.11 Pass Declaration of EUT Family Grouping: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202106003 Page: 4 of 121 Model No.: MA2UE1N, MA2UE3W Only the model MA2UE3W was tested, since the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models, the only difference is: there are extra ADS-B RF circuit and antenna on the MA2UE3W, and no this circuit on the MA2UE1N. The ESC Solution (ESC PCBA) is different between these two models, a magnetically permeable sheet is added on the plastic upper shell of MA2UE1N but no magnetically permeable sheet on the MA2UE3W. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM191202106003 Page: 5 of 121 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 S2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 5 4 GENERAL INFORMATION .................................................................................................................. 7 4.1 DETAILS OF E.U.T. ......................................................................................................................... 7 4.2 DESCRIPTION OF SUPPORT UNITS ...................................................................................................11 4.3 MEASUREMENT UNCERTAINTY ........................................................................................................11 4.4 TEST LOCATION ............................................................................................................................12 4.5 TEST FACILITY ..............................................................................................................................12 4.6 DEVIATION FROM STANDARDS ........................................................................................................12 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................12 5 EQUIPMENT LIST ..............................................................................................................................13 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................17 6.1 ANTENNA REQUIREMENT ................................................................................................................17 6.1.1 Test Requirement: ........................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Setup Photos for SZEM1912021060CR FCC ID: SS3-MA2UE1N1911 IC: 11805A-MA2UE1N1911 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 Photographs 1.1 Radiated Emissions which fall in the restricted bands Test Setup 1.2 Radiated Spurious Emissions Test Setup SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3