SS3-MT2SD22DJI Mini 2 SE

MT2SD Quick Start Guide v1.0 2022.07 Aircraft The aircraft features Obstacle Sensing and Infrared Sensing System, and a fully stabilized 3-axis gimbal with a 1/2.3” CMOS sensor camera that shoots 2.7K video and 12-megapixel photos. 1. Gimbal and Camera 2. Power Button 3. Battery Level LEDs 4. Downward Vision System 5. Infrared Sensing System 6. Motors 7. Propellers 8. Antennas 9. Battery Cover 10. Charging/Upgrading Port (USB-C) 11. microSD Card Slot 12. Aircraft Status Indicator Remote Controller Built into the remote controller is DJI’s long-range transmission technology OCUSYNC TM 2.0, offering a maximum transmission range of 6.21 mi (10 km)* and displaying video from the aircraft to DJI Fly on your mobile device at up to 1080p. 1. Power Button 2. Flight Mode Switch 3. Flight Pause/RTH Button 4. Battery Level LEDs 5. Control Sticks 6. Customizable Button 7. Photo/Video Toggle 8. Remote Controller Cable 9. Mobile Device Holder 10. USB-C Port 11. Control Sticks Storage Slot 12. Gimbal Dial 13. Shoot/Record Button *The remote controller reaches its maximum transmission distance (FCC) in a wide-open area with no electromagnetic interference at an altitude of approx. 400 ft (120 m). Download the DJI Fly App and Watching Tutorial Videos Search “DJI Fly” in the App Store or Google Play or scan the QR code below to download the app on your mobile device. Watch the tutorial videos on the official DJI website or in DJI Fly by tapping the icon in the top right corner of your screen. DJI Fly is compatible with iOS 11.0 (or later) or Android 6.0 (or later). Charging the Batteries Charge to activate the Intelligent Flight Battery before using for the first time. Checking the Battery Levels and Powering On/Off Press once to check the battery level. Press, then press and hold to turn on/off. Preparing the Aircraft 1. Remove the gimbal cover from the camera. 2. Unfold the front arms and the propellers. 3. Unfold the rear arms and the propellers. 4. Unfolded Unfold the front arms and the propellers before the rear ones. All arms and propellers must be unfolded before takeoff. Preparing the Remote Controller 1. Attach the control sticks. 2. Pull out the mobile device holder, and then unplug the end with mobile phone mark of the RC cable. 3. Place the mobile device onto the mobile device holder, and plug the RC cable into the mobile device.  Ensure the control sticks are firmly mounted.  The remote controller cable with the Lightning connector is mounted by default. Use the appropriate cable for your mobile device to connect to the remote controller. Preparing for Takeoff 1. Power on the remote controller 2. Power on the aircraft 3. Launch DJI Fly App Flight • Remote Controller Operation Specifications • Aircraft (Model: MT2SD) Weight <249 g Operating Temperature 0° to 40° C (32° to 104° F) Operating Frequency 2.4000-2.4835 GHz; 5.725-5.850 GHz Transmitter Power (EIRP) 2.4 GHz: <26 dBm (FCC), <20 dBm (CE/SRRC/MIC) 5.8 GHz: <26 dBm (FCC), <23 dBm (SRRC), <14 dBm (CE) • Remote Controller (Model: RC231) Operating Frequency 2.4000-2.4835 GHz; 5.725-5.850 GHz Transmitter Power (EIRP) 2.4 GHz: <26 dBm (FCC), <20 dBm (CE/SRRC/MIC) 5.8 GHz: <26 dBm (FCC), <23 dBm (SRRC), <14 dBm (CE) Operating Voltage 1200mA @ 3.6 V (Android) 700mA @ 3.6 V (iOS) • Intelligent Flight Battery (Model: BWX161-2250-7.7) Capacity 2250 mAh Battery Type LiPo 2S Charging Temperature 5° to 40° C (41° to 104° F) Max Charging Power 29 W For more information, read the User Manual on the official DJI website. ※ This content is subject to change without prior notice. Compliance Information FCC Compliance Notice Supplier’s Declaration of Conformity Product name: DJI MINI 2 SE Model Number: MT2SD Responsible Party: DJI Technology, Inc. Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502 Website: www.dji.com We, DJI Technology, Inc., being the responsible party, declares that the above mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information The aircraft complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This remote controller complies with FCC radiation exposure limits set forth for an unco…

Text truncated - open the document above for the full version.

SZ DJI TECHNOLOGY CO., LTD. Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: 02-06-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) & Section 2.911(d)(7) filing FCC ID: SS3-MT2SD22 SZ DJI TECHNOLOGY CO., LTD. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. SZ DJI TECHNOLOGY CO., LTD. (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. FCC US Agent Company Name: DJI Research LLC Contact Name: Jinyu Guo Address: 435 Portage Ave, Palo Alto, CA 94306 Phone No.: 530-574-9905 Email Address: [email protected] FCC FRN (optional): Sincerely yours, Applicant Signature Printed Name: Gary Zeng Title: Certification Manager Email: [email protected]

SZ DJI TECHNOLOGY CO., LTD. Certification Designating a US Agent for Service of Process To: Federal Communications Commission Date: 04-12-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: SS3-MT2SD22 SZ DJI TECHNOLOGY CO., LTD. (“the applicant”) certifies that as of the date of the filing of the application, DJI Research LLC (“the agent”) is our designated U.S. agent. We acknowledge the applicant’s consent and the designated agent for service of process’s obligation to accept service of process. The applicant accepts to maintain an agent for service of process for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. APPLICANT Company Name: SZ DJI TECHNOLOGY CO., LTD. Contact Person: Gary Zeng Address: 14th Floor, West Wing, Skyworth Semiconductor Design Building No.18 Gaoxin South 4th Ave Nanshan District, Shenzhen, P.R. China Tel.: 0755-26656677 Email: [email protected] FCC FRN: 0022596753 U.S. Agent Company Name: DJI Research LLC Contact Person: Jinyu Guo Address: 435 Portage Ave, Palo Alto, CA 94306 Tel.: 530-574-9905 Email: [email protected] FCC FRN: 0033569757 Sincerely yours, The Applicant The Agent Company Name SZ DJI TECHNOLOGY CO., LTD. DJI Research LLC Contact Person Gary Zeng Jinyu Guo Signature

SZ DJI TECHNOLOGY CO., LTD. Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 04-12-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: SS3-MT2SD22 [SZ DJI TECHNOLOGY CO., LTD.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: Gary Zeng Title: Certificate Manager Address: 14th Floor, West Wing, Skyworth Semiconductor Design Building No.18 Gaoxin South 4th Ave Nanshan District, Shenzhen, P.R. China Tel.: 0755-26656677 Email: [email protected]

SZ DJI TECHNOLOGY CO., LTD. Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 04-12-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: SS3-MT2SD22 [SZ DJI TECHNOLOGY CO., LTD.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Gary Zeng Title: Certificate Manager Address: 14th Floor, West Wing, Skyworth Semiconductor Design Building No.18 Gaoxin South 4th Ave Nanshan District, Shenzhen, P.R. China Tel.: 0755-26656677 Email: [email protected]

TCB Authority to Act as Agent Number: MS-0045317 Revision: 0 Effective date: Oct 8, 2021 Page 1 of 1 SZ DJI TECHNOLOGY CO.,LTD. Authority to Act as Agent Date: 2022-10-24 TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern: I appoint TUV Rheinland (Shenzhen) Co., Ltd. and TUV Engineer to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with SZ DJI TECHNOLOGY CO.,LTD. 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date: _2022-10-24__ Agreement is valid for 12 months from the above date. By: _____________ ____Gary Zeng__ (Signature) (Print name) _Certification Manager +86 755 26656677 (Title) (Telephone) On behalf of: SZ DJI TECHNOLOGY CO.,LTD. (Company Name)

DJI Research LLC FCC US Agent Letter of Attestation from US Agent FCC US Agent Date: 02-06-2023 Company Name: DJI Research LLC Contact Name: Jinyu Guo Address: 435 Portage Ave, Palo Alto, CA 94306 Phone No.: 530-574-9905 Email Address: [email protected] FCC FRN (optional): To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Section 2.911(d)(7) filing FCC ID: SS3-MT2SD22 This FCC Agent Letter of Attestation is to confirm that we have accepted the responsibility to act as US Agent on behalf of SZ DJI TECHNOLOGY CO., LTD. (“the applicant”) for FCC ID: SS3-MT2SD22 As FCC US Agent, we are aware of the requirements involved as outlined in the FCC section 2.911(d)(7), to act as the applicant’s agent for service of process. APPLICANT Company Name: SZ DJI TECHNOLOGY CO., LTD. Contact Name: SS3 Address: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China Phone No.: 0755-26656677 Email Address: [email protected] This Service is Valid until (expiry date): / Sincerely yours, Agent Signature Printed Name: Jinyu Guo Title: Corporate counsel

Request for Confidentiality Letter Number: MS0044715 Revision: 1 Effective date: Sep 12, 2022 Author: William Graff Owner: William Graff MS-0044715 Page 1 of 1 Revision 1 Legal Scope: Global Business Scope: Cross Business Process Scope: Cross Process The following is a sample Confidentiality Request letter, which must be completed on Applicant company letterhead, signed by the Applicant or their authorized Agent, and submitted to TÜ V Rheinland. Date: 02 Nov 2022 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: SS3-MT2SD22 Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term n/a External Photo Short Term Permanent Internal Photos *** Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Short Term Permanent Test Setup*** Short Term Permanent Tune-Up Procedure Short Term Permanent User’s Manual*** Short Term Permanent Part List/ Antenna Construction SZ DJI TECHNOLOGY CO.,LTD. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: _______________________________________________ _______Gary Zeng ____________ (Signature/Title) (Print name) Tel: +86 755 26656677 Email: [email protected]

ATTACHMENT 3 Photo Documentation Page 1 of 11 Report No.: CN22194N 001 Product: Aircraft (DJI MINI 2 SE) Type Designation: MT2SD Figure 1: External view 1-top Figure 2: External view 2 - bottom ATTACHMENT 3 Photo Documentation Page 2 of 11 Report No.: CN22194N 001 Product: Aircraft (DJI MINI 2 SE) Type Designation: MT2SD Figure 3: External view 3 - front Figure 4: External view 4 rear with battery cover removed

Label information: Label location:

ATTACHMENT 3 Photo Documentation Page 3 of 11 Report No.: CN22194N 001 Product: Aircraft (DJI MINI 2 SE) Type Designation: MT2SD Figure 5: External view 5 rear with battery removed Figure 6: Internal view 1 (with top cover removed) ATTACHMENT 3 Photo Documentation Page 4 of 11 Report No.: CN22194N 001 Product: Aircraft (DJI MINI 2 SE) Type Designation: MT2SD Figure 7: Internal view 2 (with bottom cover removed) Figure 8: Internal view - 3 ATTACHMENT 3 Photo Documentation Page 5 of 11 Report No.: CN22194N 001 Product: Aircraft (DJI MINI 2 SE) Type Designation: MT2SD Figure 9: Mainboard view -1 Figure 10: Mainboard view -2 ATTACHMENT 3 Photo Documentation Page 6 of 11 Report No.: CN22194N 001 Product: Aircraft (DJI MINI 2 SE) Type Designation: MT2SD Figure 11: Mainboard view -3 Figure 12: Mainboard view -4 ATTACHMENT 3 Photo Documentation Page 7 of 11 Report No.: CN22194N 001 Product: Aircraft (DJI MINI 2 SE) Type Designation: MT2SD Figure 13: Motivation board view -1 Figure 14: Motivation board view -2 ATTACHMENT 3 Photo Documentation Page 8 of 11 Report No.: CN22194N 001 Product: Aircraft (DJI MINI 2 SE) Type Designation: MT2SD Figure 15: Gimbal board view -1 Figure 16: Gimbal board view -2 ATTACHMENT 3 Photo Documentation Page 9 of 11 Report No.: CN22194N 001 Product: Aircraft (DJI MINI 2 SE) Type Designation: MT2SD Figure 17: Gimbal board view -3 Figure 18: Internal view (Propeller motor view) ATTACHMENT 3 Photo Documentation Page 10 of 11 Report No.: CN22194N 001 Product: Aircraft (DJI MINI 2 SE) Type Designation: MT2SD Figure 19: Battery view Figure 20: Adapter view -1 ATTACHMENT 3 Photo Documentation Page 11 of 11 Report No.: CN22194N 001 Product: Aircraft (DJI MINI 2 SE) Type Designation: MT2SD Figure 21: Adapter view -2 Figure 22: Adapter view -3

1 DJI Antenna Datasheet __ WM161 Foot SDR Ant ___ __ 2020-07-08 Revision history Version Change notes Modificator Date V1.0 First draft. Jeremy.ma 2020.07.08 1 DJI Antenna Datasheet 1、 Basic Specifications No. Specification Descriptions Notes 1 Antenna Name WM161 Foot SDR Ant 2 Brand DJI 3 Operation Frequency 2.4~2.483GHz; 5.725~5.875GHz 4 Connector Type IPEX 5 Impedance 50ohm 6 Gain [email protected]~2.483GHz [email protected]~5.875GHz 7 Efficiency ≥55% 8 VSWR ≤3 9 Polarization type Linear 10 3dB Beamwidth Omnidirectional horizon, 60°revelation 11 Weight 2、 Return Loss Insert radation return loss. 3、 Radiation PatternTheta=90度 Phi=0度 Phi=90度 5.8G Theta=90度 Phi=0度 Phi=90度 4、 Structure drawing Insert structure drawing.

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN22WMZD 004 Auftrags-Nr.: Order no.: 168389903 Seite 1 von 9 Page 1 of 9 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2022-09-19 Auftraggeber: Client: SZ DJI TECHNOLOGY CO., LTD. 14th Floor, West Wing, Skyworth Semiconductor Design Building No.18 Gaoxin South 4th Ave Nanshan District, Shenzhen, P.R. China Prüfgegenstand: Test item: DJI Mini 2 SE Bezeichnung / Typ-Nr.: Identification / Type no.: MT2SD (Trademark: DJI) Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: 47 CFR FCC Part 2.1091 Wareneingangsdatum: Date of sample receipt: 2022-09-20 Please refer to Photo Document Prüfmuster-Nr.: Test sample no: A003336027-006~007, 009~011 Prüfzeitraum: Testing period: 2022-09-21 to 2022-10-14 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: genehmigt von: authorized by: Datum: Date: 2022-10-31 Ausstellungsdatum: Issue date: 2022-10-31 Stellung / Position: Project Manager Stellung / Position: Reviewer Sonstiges / Other: FCC ID: SS3-MT2SD22 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TÜV Rheinland (Shenzhen) Co., Ltd. 1601 R&D Room, 1602-1604, 17-18F, Building 7 Site C, Vanke Cloud City Phase I, Xingke First Street, Xili Street, Xili Community, Nanshan District, Shenzhen 518052, P.R. China Mail: [email protected] · Web: www.tuv.com jjj Bell Hu Hardy Suo Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN22WMZD 004 Seite 2 von 9 Page 2 of 9 TEST SUMMARY 3.1.1 RF EXPOSURE COMPLIANCE RESULT: Pass Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN22JIUF 004 Seite 3 von 9 Page 3 of 9 CONTENTS 1. TEST SITES ....................................................................................................................... 4 1.1 TEST FACILITIES ............................................................................................................... 4 1.2 LIST OF TEST AND MEASUREMENT INSTRUMENTS ............. ERROR! BOOKMARK NOT DEFINED. 1.3 TRACEABILITY .................................................................................................................. 4 1.4 CALIBRATION .................................................................................................................... 4 1.5 LOCATION OF ORIGINAL DATA ........................................................................................... 4 1.6 STATUS OF FACILITY USED FOR TESTING ........................................................................... 4 2. GENERAL PRODUCT INFORMATION .................................................................................... 5 2.1 GENERAL DESCRIPTION .................................................................................................... 5 2.2 RATING AND SYSTEM DETAILS ........................................................................................... 5 3. TEST RESULTS ................................................................................................................. 7 3.1 TRANSMITTER REQUIREMENTS & TEST SUITES ................................................................... 7 3.1.1 RF Exposure Compliance ............................................................................................................ 7 3.1.1.1 FCC Part 1.1310, Part 2.1091 ........................................................................................ 8 3.1.1.2 RSS-102 Exemption Limits for Routine Evaluation – RF Exposure EvaluationError! Bookmark not defined. 4. LIST OF TABLES ................................................................................................................ 9 Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN22JIUF 004 Seite 4 von 9 Page 4 of 9 1. TEST SITES 1.1 TEST FACILITIES TÜV Rheinland (Shenzhen) Co., Ltd. Address: No. 362 Huanguan Road Middle, Longhua District, Shenzhen 518110, P.R. China FCC Registration No.: 694916 ISED Wireless Device Testing Laboratory: 25069 1.2 Traceability All measurement equipment calibrations are traceable to NIST or where calibration is performed outside the United States, to equivalent nationally recognized standards organizations. 1.3 Calibration Equipment requiring calibration is calibrated periodically by the manufacturer or according to manufacturer’s specifications. Additionally all equipment is verified for proper performance on a regular basics using in house standards or comparisons. 1.4 Location of Original Data The original copies of all test data taken during actual testing were attached at Appendixes of this report and delivered to the applicant. A copy has been retained in the TÜV Rheinland (Shenzhen) file for certification follow-up purposes. 1.5 Status of Facility Used for Testing The TÜV Rheinland (Shenzhen) Co., Ltd. facility located at No. 362…

Text truncated - open the document above for the full version.

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN22WMZD 002 Auftrags-Nr.: Order no.: 168389903 Seite 1 von 22 Page 1 of 22 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2022-09-19 Auftraggeber: Client: SZ DJI TECHNOLOGY CO., LTD. 14th Floor, West Wing, Skyworth Semiconductor Design Building No.18 Gaoxin South 4th Ave Nanshan District, Shenzhen, P.R. China Prüfgegenstand: Test item: DJI Mini 2 SE Bezeichnung / Typ-Nr.: Identification / Type no.: MT2SD (Trademark: DJI) Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: CFR47 FCC Part 15: Subpart C Section 15.247 Wareneingangsdatum: Date of sample receipt: 2022-09-20 Please refer to photo documents Prüfmuster-Nr.: Test sample no: A003336027-006~007, 009~011 Prüfzeitraum: Testing period: 2022-09-21 to 2022-10-17 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: genehmigt von: authorized by: Datum: Date: 2022-10-31 Ausstellungsdatum: Issue date: 2022-10-31 Stellung / Position: Project Manager Stellung / Position: Reviewer Sonstiges / Other: FCC ID: SS3-MT2SD22 This report is for 2.4GHz SDR. Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TÜV Rheinland (Shenzhen) Co., Ltd. 1601 R&D Room, 1602-1604, 17-18F, Building 7 Site C, Vanke Cloud City Phase I, Xingke First Street, Xili Street, Xili Community, Nanshan District, Shenzhen 518052, P.R. China Mail: [email protected] · Web: www.tuv.com jjj Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN22WMZD 002 Seite 2 von 22 Page 2 of 22 Test Summary 5.1.1 ANTENNA REQUIREMENT RESULT: Pass 5.1.2 MAXIMUM PEAK CONDUCTED OUTPUT POWER RESULT: Pass 5.1.3 CONDUCTED POWER SPECTRAL DENSITY RESULT: Pass 5.1.4 6DB BANDWIDTH RESULT: Pass 5.1.5 99% BANDWIDTH RESULT: Pass 5.1.6 CONDUCTED SPURIOUS EMISSIONS MEASURED IN 100 KHZ BANDWIDTH RESULT: Pass 5.1.7 RADIATED SPURIOUS EMISSION RESULT: Pass Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN22WMZD 002 Seite 3 von 22 Page 3 of 22 Contents 1 GENERAL REMARKS ........................................................................................................................... 4 1.1 COMPLEMENTARY MATERIALS ............................................................................................................ 4 2 TEST SITES ........................................................................................................................................ 5 2.1 TEST FACILITIES ................................................................................................................................. 5 2.2 LIST OF TEST AND MEASUREMENT INSTRUMENTS................................................................................. 5 2.3 TRACEABILITY .................................................................................................................................... 6 2.4 CALIBRATION ..................................................................................................................................... 6 2.5 MEASUREMENT UNCERTAINTY............................................................................................................. 6 2.6 LOCATION OF ORIGINAL DATA ............................................................................................................. 6 2.7 STATUS OF FACILITY USED FOR TESTING ............................................................................................. 6 3 GENERAL PRODUCT INFORMATION ..............................…

Text truncated - open the document above for the full version.