SS3-MT4MFVD23DJI Mini 4 Pro

MT4MFVD Quick Start Guide Aircraft 1. Horizontal Omnidirectional Vision System 2. Gimbal and Camera 3. Downward Vision System 4. Infrared Sensing System 5. Auxiliary Bottom Light 6. Battery Buckles 7. Frame Arms 8. Aircraft Status Indicator 9. Motors 10. Landing Gear (Built-in antennas) 11. Propellers 12. Battery Level LEDs 13. Power Button 14. USB-C Port 15. microSD Card Slot 16. Intelligent Flight Battery 1 2 8 7 6 1 3 4 5 9 10 3 11 12 13 14 15 1 1 16 Remote Controller RC151 1. Power Button 2. Flight Mode Switch 3. Flight Pause/RTH Button 4. Control Sticks 5. Customizable Button 6. Mobile Device Holder 7. Antennas 8. Remote Controller Cable 9. Photo/Video Toggle 10. Control Sticks Storage Slot 11. USB-C Port 12. Battery Level LEDs 13. Gimbal Dial 14. Shutter/Record Button 15. Mobile Device Slot Download the DJI Fly App and Watch the Video Tutorials Charging to Activate Checking the Battery Level and Powering On/Off Press once to check the battery level. Press, then press and hold to turn on/off. Preparing the Aircraft Preparing the Remote Controller Ready to Fly Power on the remote controller and the aircraft, and run the DJI Fly app. Flight Auto Take-off/Landing Remote controller Operations Specifications Aircraft (Model: MT4MFVD, MT4MFVDB) Operating Temperature -10° to 40° C (14° to 104° F) Operating Frequency 2.400-2.4835 GHz, 5.150-5.250 GHz, 5.725-5.850 GHz Remote Controller (Model: RC151) Operating Temperature -10° to 40° C (14° to 104° F) Operating Frequency 2.4000-2.4835 GHz, 5.150-5.250 GHz, 5.725-5.850 GHz Intelligent Flight Battery (Model: BWX140-2590-7.32) Charging Temperature 5° to 40° C (41° to 104° F) Capacity 2590 mAh Max Charging Power 37 W Standard Voltage 7.32 V Intelligent Flight Battery Plus (Model: BWX162-3850-7.38) Charging Temperature 5° to 40° C (41° to 104° F) Capacity 3850 mAh Max Charging Power 58 W Standard Voltage 7.38 V Compliance Info FCC Compliance Notice Supplier’s Declaration of Conformity Product name: DJI MINI 4 PRO Model Number: MT4MFVD Responsible Party: DJI Technology, Inc. Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502 Website: www.dji.com We, DJI Technology, Inc., being the responsible party, declares that the above mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information The aircraft complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This remote controller complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body. ISED Compliance Notice This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1)L’appareil ne doit pas produire de brouillage; (2)L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This equipment complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjun…

Text truncated - open the document above for the full version.

SZ DJI TECHNOLOGY CO., LTD. Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 2023-08-30 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: SS3-MT4MFVD23 [SZ DJI TECHNOLOGY CO., LTD.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: Gary Zeng Title: Certificate Manager Address: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China. Tel.: 0755-26656677 Email: [email protected]

SZ DJI TECHNOLOGY CO., LTD. Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 2023-08-30 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: SS3-MT4MFVD23 [SZ DJI TECHNOLOGY CO., LTD.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Gary Zeng Title: Certificate Manager Address: Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China. Tel.: 0755-26656677 Email: [email protected]

TCB Authority to Act as Agent Number: MS-0045317 Revision: 0 Effective date: Oct 8, 2021 Page 1 of 1 DJI TECHNOLOGY CO.,LTD. Authority to Act as Agent Date: __2023-08-30____________ TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern: I appoint TUV Rheinland (Shenzhen) Co., Ltd. and TUV Engineer to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with SZ DJI TECHNOLOGY CO.,LTD. Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street,Nanshan District, Shenzhen, China. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date: _2023-08-30_ Agreement is valid for 12 months from the above date. By: __________________________ ___________Gary Zeng______________ (Signature) (Print name) __ Certificate manager __________ ____+86 755 26656677______________________ (Title) (Telephone) On behalf of: _ SZ DJI TECHNOLOGY CO.,LTD. (Company Name)

Request for Confidentiality Letter Number: MS0044715 Revision: 1 Effective date: Sep 12, 2022 Author: William Graff Owner: William Graff MS-0044715 Page 1 of 1 Revision 1 Legal Scope: Global Business Scope: Cross Business Process Scope: Cross Process SZ DJI TECHNOLOGY CO., LTD. Date: 30 Aug 2023 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: SS3-MT4MFVD23 Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term n/a External Photo Short Term Permanent Internal Photos *** Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Short Term Permanent Test Setup*** Short Term Permanent User’s Manual*** Short Term Permanent Part List/ Antenna Construction Short Term Permanent Software Security Information SZ DJI TECHNOLOGY CO.,LTD. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: _______________________________________________ _______Gary Zeng ____________ (Signature/Title) (Print name) Tel: +86 755 26656677 Email: [email protected]

1 DJI Antenna Datasheet ___WA140 antenna____ __ 2023-05-26 SZ DJI TECHNOLOGY CO., LTD Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China. Revision history Version Change notes Modificator Date V0.1 First draft. Freeman.D eng 2023.05.26 1 DJI Antenna Datasheet 1、 Basic Specifications No. Specification Descriptions Notes 1 Antenna Name WA140 Ant 2 Brand DJI 3 Operation Frequency 2.4~2.483GHz; 5.15-5.25GHz; 5.725~5.85GHz; 4 Connector Type Ipex-4 5 Impedance 50ohm 6 Gain [email protected] [email protected] （Only for CE/FCC/NCC） [email protected] 7 Efficiency ≥50% 8 VSWR ≤2 9 Polarization type Linear 10 3dB Beamwidth Omnidirectional horizon 11 Weight 12 Antenna type Dipole 2、 Antenna Gain 3.1 LF antenna Frequency Efficiency Gain(dBi) 2400MHz 66% 0.76119 2420MHz 63% 0.81233 2450MHz 65% 0.99091 2470MHz 59% 0.80206 Frequency Efficiency Gain(dBi) 5150MHz 43% 0.45847 5200MHz 40% 0.79302 5250MHz 44% 0.95313 Frequency Efficiency Gain(dBi) 5725MHz 55% 1.25112 5775MHz 52% 1.32950 5800MHz 53% 1.45854 5850MHz 52% 1.46515 3.2 RF antenna Frequency Efficiency Gain(dBi) 2400MHz 65% 0.72509 2420MHz 62% 0.86527 2450MHz 64% 0.92478 2470MHz 59% 0.65424 Frequency Efficiency Gain(dBi) 5150MHz 40% 0.88512 5200MHz 43% 0.73425 5250MHz 44% 0.23541 Frequency Efficiency Gain(dBi) 5725MHz 47% 1.41496 5775MHz 49% 1.47157 5800MHz 51% 1.44765 5850MHz 52% 1.41186 3.3 LB antenna Frequency Efficiency Gain(dBi) 2400MHz 51% 0.82512 2420MHz 53% 0.54125 2450MHz 53% 0.82478 2470MHz 57% 0.65424 Frequency Efficiency Gain(dBi) 5150MHz 46% 0.89154 5200MHz 44% 0.98452 5250MHz 43% 0.74511 Frequency Efficiency Gain(dBi) 5725MHz 50% 1.31871 5775MHz 51% 1.46891 5800MHz 51% 1.26812 5850MHz 52% 1.36540 3.4 RB antenna Frequency Efficiency Gain(dBi) 2400MHz 59% 0.81125 2420MHz 57% 0.91545 2450MHz 55% 0.91181 2470MHz 52% 0.75831 Frequency Efficiency Gain(dBi) 5150MHz 43% 0.86483 5200MHz 46% 0.98185 5250MHz 44% 0.69710 Frequency Efficiency Gain(dBi) 5725MHz 55% 1.48807 5775MHz 59% 1.25999 5800MHz 52% 1.44145 5850MHz 53% 1.33584 3、 Radiation Pattern 4.1 LF Phi 90 4.2 LF Theta90 4.3 RF Phi 90 4.4 RF Theta 90 4.5 LB Phi90 4.6 LB Theta 90 4.7 RB Phi90 4.8 RB Theta90 4、 Structure drawing

DJI Mini 4 Pro Label information: Label location:

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN23WKV3 005 Auftrags-Nr.: Order no.: 168427672 Seite 1 von 12 Page 1 of 12 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2023-05-22 Auftraggeber: Client: SZ DJI TECHNOLOGY CO., LTD Lobby of T2, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, China. Prüfgegenstand: Test item: DJI Mini 4 Pro Bezeichnung / Typ-Nr.: Identification / Type no.: MT4MFVD, MT4MFVDB (Trademark: DJI) Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: FCC Part 2: Section 2.1091 Wareneingangsdatum: Date of sample receipt: 2023-05-25 Please refer to Photo Document Prüfmuster-Nr.: Test sample no: A003481038-013~014 Prüfzeitraum: Testing period: 2023-05-31 - 2023-08-22 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Bell Hu genehmigt von: authorized by: X Signed by: Lin Lin Datum: Date: 2023-08-23 Ausstellungsdatum: Issue date: 2023-08-23 Stellung / Position: Sachverständige(r)/Expert Stellung / Position: Sachverständige(r)/Expert Sonstiges / Other: FCC ID: SS3-MT4MFVD23 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland (Shenzhen) Co., Ltd., 1601-1604, 17-18F, Tower A Building 2, Shenzhen International Innovation Valley, Dashi 1st Road, Xili Street, Xili Community, Nanshan District, Shenzhen 518052, P. R. China Mail: [email protected] · Web: www.tuv.com Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: CN23WKV3 005 Test report no.: Seite 2 von 12 Page 2 of 12 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2021, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezueglich des Risikos durch diese Entscheidungsregel siehe ILAC G8:2019. The decision rule for statements of conformity, based on numerical measurement results, in this test report is based on the “Zero Guard Band Rule” and “Simple Acceptance” in accordance with ILAC G8:2019 and IEC Guide 115:2021, unless otherwise specified in the applied standard mentioned on Page 1 o…

Text truncated - open the document above for the full version.

Prüfbericht - Produkte Test Report - Products Appendix A CN23WKV3 002 Page 1 of 38 Appendix A: Test Results of Bluetooth BLE APPENDIX A: TEST RESULTS OF BLUETOOTH BLE ........................................................................................................... 1 APPENDIX A.1: TEST RESULTS OF CONDUCTED POWER SPECTRAL DENSITY ..................................................................................... 2 APPENDIX A.2: TEST RESULTS OF 6DB BANDWIDTH ................................................................................................................... 5 APPENDIX A.3: TEST RESULTS OF 99% BANDWIDTH ................................................................................................................... 8 APPENDIX A.4: TEST RESULTS OF CONDUCTED SPURIOUS EMISSIONS MEASURED IN 100 KHZ BANDWIDTH ...................................... 11 Band Edge ................................................................................................................................................................... 11 Conducted Spurious Emission ..................................................................................................................................... 13 APPENDIX A.5: TEST RESULTS OF RADIATED SPURIOUS EMISSIONS ............................................................................................. 20 30 MHz - 1GHz ............................................................................................................................................................ 20 1GHz - 18GHz .............................................................................................................................................................. 22 Evaluations for simultaneous use mode ..................................................................................................................... 34 APPENDIX A.6: TEST RESULTS OF RADIATED EMISSIONS IN RESTRICTED BANDS ............................................................................. 35 Prüfbericht - Produkte Test Report - Products Appendix A CN23WKV3 002 Page 2 of 38 Appendix A.1: Test Results of Conducted Power Spectral Density TestMode Antenna Channel Result[dBm/3-100kHz] Limit[dBm/3kHz] Verdict BLE_1M Ant1 2402 -9.42 ≤8.00 PASS 2440 -8.48 ≤8.00 PASS 2480 -9.92 ≤8.00 PASS BLE_2M Ant1 2402 -11.82 ≤8.00 PASS 2440 -11.06 ≤8.00 PASS 2480 -12.51 ≤8.00 PASS Prüfbericht - Produkte Test Report - Products Appendix A CN23WKV3 002 Page 3 of 38 BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Prüfbericht - Produkte Test Report - Products Appendix A CN23WKV3 002 Page 4 of 38 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 BLE_2M_Ant1_2480 Prüfbericht - Produkte Test Report - Products Appendix A CN23WKV3 002 Page 5 of 38 Appendix A.2: Test Results of 6dB Bandwidth TestMode Antenna Channel DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 0.644 2401.680 2402.324 0.5 PASS 2440 0.660 2439.668 2440.328 0.5 PASS 2480 0.656 2479.664 2480.320 0.5 PASS BLE_2M Ant1 2402 1.128 2401.420 2402.548 0.5 PASS 2440 1.072 2439.476 2440.548 0.5 PASS 2480 1.104 2479.424 2480.528 0.5 PASS Prüfbericht - Produkte Test Report - Products Appendix A CN23WKV3 002 Page 6 of 38 BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Prüfbericht - Produkte Test Report - Products Appendix A CN23WKV3 002 Page 7 of 38 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 BLE_2M_Ant1_2480 Prüfbericht - Produkte Test Report - Products Appendix A CN23WKV3 002 Page 8 of 38 Appendix A.3: Test Results of 99% Bandwidth TestMode Antenna Channel OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 1.0190 2401.4962 2402.5152 --- PASS 2440 1.0105 2439.5000 2440.5105 --- PASS 2480 1.0254 2479.4914 2480.5168 --- PASS BLE_2M Ant1 2402 2.0479 2401.0005 2403.0484 --- PASS 2440 2.0374 2439.0052 2441.0426 --- PASS 2480 2.0314 2479.0026 2481.0340 --- PASS Prüfbericht - Produkte Test Report - Products Appendix A CN23WKV3 002 Page 9 of 38 BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Prüfbericht - Produkte Test Report - Products Appendix A CN23WKV3 002 Page 10 of 38 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 BLE_2M_Ant1_2480 Prüfbericht - Produkte Test Report - Products Appendix A CN23WKV3 002 Page 11 of 38 Appendix A.4: Test Results of Conducted Spurious Emissions Measured in 100 kHz Bandwidth Band Edge TestMode Antenna ChName Channel RefLevel[dBm] Result[dBm] Limit[dBm] Verdict BLE_1M Ant1 Low 2402 4.708 -44.61 ≤-15.29 PASS High 2480 4.357 -45.11 ≤-15.64 PASS BLE_2M Ant1 Low 2402 4.843 -43.97 ≤-15.16 PASS High 2480 3.280 -45.3 ≤-16.72 PASS BLE_1M_Ant1_Low_2402 BLE_1M_Ant1_High_2480 Prüfbericht - Produkte Test Report - Products Appendix A CN23WKV3 002 Page 12 of 38 BLE_2M_Ant1_Low_2402 BLE_2M_Ant1_High_2480 Prüfbericht - Produkte Test Report - Products Appendix A CN23WKV3 002 Page 13 of 38 Conducted Spurious Emission TestMode Antenna Channel FreqRange [MHz] RefLevel [dBm] Result[dBm] Limit[dBm] Verdict BLE_1M Ant1 2402 Reference 4.85 4.85 --- PASS 30~1000 4.85 -52.3 ≤-15.15 PASS 1000~26500 4.85 -43.04 ≤-15.15 PASS 2440 Reference 4.02 4.02 --- PASS 30~1000 4.02 -51.85 ≤-15.98 PASS 1000~26500 4.02 -42.84 ≤-15.98 PASS 2480 Reference 3.35 3.35 --- PASS 30~1000 3.35 -51.85 ≤-16.65 PASS 1000~26500 3.35 -42.6 ≤-16.65 PASS BLE_2M Ant1 2402 Reference 2.45 2.45 --- PASS 30~1000 2.45 -52.14 ≤-17.55 PASS 1000~26500 2.45 -41.86 ≤-17.55 PASS 2440 Reference 3.78 3.78 --- PASS 30~1000 3.78 -52.2 ≤-16.22 PASS 1000~26500 3.78 -42.61 ≤-16.22 PASS 2480 Reference 4.31 4.31 --- PASS 30~1000 4.31 -51.69 ≤-15.69 PASS 1000~26500 4.31 -42.54 ≤-15.69 PASS Prüfbericht - Produkte Test Report - Products Appendix A CN23WKV3 002 Page 14 of 38 BLE_1M_Ant1_2402_0~Reference BLE_1M_Ant1_2402_30~1000 BLE_1M_Ant1_2402_1000~26500 Prüfbericht - Produkte Test Report - Products Appendix A CN23WKV3 002 Page 15 of 38 BLE_1M_Ant1_2440_0~Reference BLE_1M_Ant1_2440_30~1000 BLE_1M_Ant1_2440_1000~26500 Prüfbericht - Produkte Test Report - Products Appendix A CN23WKV3 002 Page 16 of 38 BLE_1M_Ant1_24…

Text truncated - open the document above for the full version.

Prüfbericht - Produkte Test Report - Products Appendix B CN23WKV3 002 Page 1 of 189 Appendix B: Test Results of 2.4GHz SDR APPENDIX B: TEST RESULTS OF 2.4GHZ SDR .................................................................................................................. 1 APPENDIX B.1: TEST RESULTS OF CONDUCTED POWER SPECTRAL DENSITY ..................................................................................... 2 2.4GHz SDR, 1.4MHz BW .............................................................................................................................................. 2 2.4GHz SDR, 1.4MHz BW CA mode .............................................................................................................................. 7 2.4GHz SDR, 3MHz BW ............................................................................................................................................... 12 2.4GHz SDR, 3MHz BW CA mode ............................................................................................................................... 17 2.4GHz SDR, 5MHz BW ............................................................................................................................................... 22 2.4GHz SDR, 10MHz BW ............................................................................................................................................. 27 2.4GHz SDR, 20MHz BW ............................................................................................................................................. 30 2.4GHz SDR, 40MHz BW ............................................................................................................................................. 33 2.4GHz SDR, 60MHz BW ............................................................................................................................................. 36 APPENDIX B.2: TEST RESULTS OF 6DB BANDWIDTH .................................................................................................................. 39 2.4GHz SDR, 1.4MHz BW ............................................................................................................................................ 39 2.4GHz SDR, 1.4MHz BW CA mode ............................................................................................................................ 41 2.4GHz SDR, 3MHz BW ............................................................................................................................................... 43 2.4GHz SDR, 3MHz BW CA mode ............................................................................................................................... 45 2.4GHz SDR, 5MHz BW ............................................................................................................................................... 47 2.4GHz SDR, 10MHz BW ............................................................................................................................................. 49 2.4GHz SDR, 20MHz BW ............................................................................................................................................. 51 2.4GHz SDR, 40MHz BW ............................................................................................................................................. 53 2.4GHz SDR, 60MHz BW ............................................................................................................................................. 55 APPENDIX B.3: TEST RESULTS OF 99% BANDWIDTH ................................................................................................................. 57 2.4GHz SDR, 1.4MHz BW ...................................................................…

Text truncated - open the document above for the full version.